Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Berliner Glas/ BG Medical Applications GmbH
Waldkraiburger Str. 5,
12347
Berlin
Germany
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
This company is co-exhibitor of
IVAM Microtechnology Network
Location
Hall map
Fairground map
Our range of products
Product categories
- 01 Manufacturing of components
- 01.01 Electronic manufacturing services (EMS)
- 01.01.04 Elektronics assembly
Elektronics assembly
- 01 Manufacturing of components
- 01.06 Laser processing
- 01.06.01 Laser cutting
Laser cutting
- 01 Manufacturing of components
- 01.06 Laser processing
- 01.06.02 Laser welding
Laser welding
- 01 Manufacturing of components
- 01.06 Laser processing
- 01.06.03 Laser marking
Laser marking
- 02 Manufacturing of finished products
- 02.09 Electromedical devices
Electromedical devices
- 02 Manufacturing of finished products
- 02.10 Endoscopes
- 02 Manufacturing of finished products
- 02.12 Dental products
Dental products
- 02 Manufacturing of finished products
- 02.16 Laboratory technologies
- 02.16.01 Lab-on-a-chip
Lab-on-a-chip
- 03 Services
- 03.04 Design and development
- 03.04.01 Product design, product development
Product design, product development
- 03 Services
- 03.05 Assembly
Assembly
- 03 Services
- 03.07 Labeling
Labeling
- 03 Services
- 03.09 Testing services
- 03.09.02 Functional testing
Functional testing
- 03 Services
- 03.09 Testing services
- 03.09.05 Certification
Certification
- 05 Components, modules, OEM equipment
- 05.08 Optical components
Optical components
- 05 Components, modules, OEM equipment
- 05.13 Other components, modules, OEM equipment
Other components, modules, OEM equipment
- 06 Electrical components, electronical components
- 06.02 Electromechanical components
- 06.02.01 Cables
Cables
- 06 Electrical components, electronical components
- 06.02 Electromechanical components
- 06.02.02 Plugs, connectors
Plugs, connectors
- 06 Electrical components, electronical components
- 06.09 Lamps
Lamps
- 06 Electrical components, electronical components
- 06.10 LED technology
LED technology
- 06 Electrical components, electronical components
- 06.11 Displays
Displays
- 06 Electrical components, electronical components
- 06.12 Imaging systems
Imaging systems
- 06 Electrical components, electronical components
- 06.13 Camera systems
Camera systems
- 06 Electrical components, electronical components
- 06.14 Other electrical / electronical components
Other electrical / electronical components
- 07 Microtechnology
- 07.02 Micromechanics
Micromechanics
- 07 Microtechnology
- 07.08 Microprocessing
- 07.08.03 Laser structuring
Laser structuring
- 07 Microtechnology
- 07.09 Microassembly
Microassembly
- 09 Software, IT
- 09.02 Augmented reality, virtual reality (VR)
Augmented reality, virtual reality (VR)
Our products
Product category: Endoscopes, Dental products, Optical components, Other components, modules, OEM equipment, Imaging systems, Camera systems, Microoptics
Engineering Expertise
The Berliner Glas Group provides all solutions from a single source, from conceptual design to the finished product. To do so, our employees work closely with you during each step.
We are your long-term OEM partner. In cooperation with you, we develop innovative system solutions, bring them to the production stage and make a valuable contribution to your value-added chain.
From the very beginning, we listen to exactly what you need and try to understand your problem: What are your requests? What individual requirements do you have? How exactly will you use the product? What must it achieve?
As a result, we have a deep understanding of the topics, trends and drivers of your market and we excel at tackling your product, your needs and your problem. You profit from an exceedingly flexibility and quick realization of your needs.
Our developers – in total, they make up 12 % of all of our employees – verify the technical feasibility of your idea, specify the technical solution and create a prototype for you. Of course, all of this happens in close cooperation with you. To do so, we work according to an exactly defined and tested process.
Do you have an idea? Talk to us.
We are your long-term OEM partner. In cooperation with you, we develop innovative system solutions, bring them to the production stage and make a valuable contribution to your value-added chain.
From the very beginning, we listen to exactly what you need and try to understand your problem: What are your requests? What individual requirements do you have? How exactly will you use the product? What must it achieve?
As a result, we have a deep understanding of the topics, trends and drivers of your market and we excel at tackling your product, your needs and your problem. You profit from an exceedingly flexibility and quick realization of your needs.
Our developers – in total, they make up 12 % of all of our employees – verify the technical feasibility of your idea, specify the technical solution and create a prototype for you. Of course, all of this happens in close cooperation with you. To do so, we work according to an exactly defined and tested process.
Do you have an idea? Talk to us.
Product category: Optical components
Aspherical Optics & Freeform Surfaces
SwissOptic AG – a Berliner Glas Group company – is your partner for the development and production of customized aspheres and freeform surfaces.
The use of aspheres in optical systems enables better performance using fewer optical elements. This allows for more compact designs, lower weight and exceptional performance.
Four reasons why you should choose aspheres from SwissOptic AG:
The use of aspheres in optical systems enables better performance using fewer optical elements. This allows for more compact designs, lower weight and exceptional performance.
Four reasons why you should choose aspheres from SwissOptic AG:
- Extensive finishing competence with regard to the production of high-precision aspherical lenses
- Innovative measurement technology
- Speed and flexibility
- Complete in-house processing chain
Product category: Other components, modules, OEM equipment, Imaging systems
Autoclavable video-adapter
Berliner Glas develops and manufactures video adaptors with fixed focal length e. g. for endoscopy. We are able to manufacture hermetically sealed housings with our proprietary key technologies such as glass soldering. The optics in the housing are moved without contact by an ingenious magnetic mechanism.
Therefore, Berliner Glas ensures fully functional lenses even after 500 autoclaving cycles in saturated water vapor.
In addition, we offer housings which can also be disinfected with
aldehyde and non-aldehyde-based cleaning agents. This makes the use of sterile casings unnecessary.
The video couplers of Berliner Glas are available in several fixed focal lengths and can be adapted to cameras of well-known manufacturers.
The lenses are produced as a private-label product in the housing according to customer requirements.
Therefore, Berliner Glas ensures fully functional lenses even after 500 autoclaving cycles in saturated water vapor.
In addition, we offer housings which can also be disinfected with
aldehyde and non-aldehyde-based cleaning agents. This makes the use of sterile casings unnecessary.
The video couplers of Berliner Glas are available in several fixed focal lengths and can be adapted to cameras of well-known manufacturers.
The lenses are produced as a private-label product in the housing according to customer requirements.
Product category: Other components, modules, OEM equipment, Imaging systems
OEM RGB and white LED illumination modules
For surgical applications in ophthalmology the use of fibers that are on the order of 700 µm or less is typical. This allows the least invasive solution for the patient and is therefore highly desirable. The use of these small diameters with any illumination source is challenging due to the difficulty of coupling the light into the fibers.
Berliner Glas has developed an OEM high output illumination module that is capable of efficiently coupling LED light sources into even the smallest light guides or fibers.
LEDs have significant advantages over Xenon sources including longer life, energy efficiency, and in the case of the Berliner Glas modules, the ability to tune the color temperature of the light for better diagnostic information.
You can find more information on our website and in the technical data sheet.
Berliner Glas has developed an OEM high output illumination module that is capable of efficiently coupling LED light sources into even the smallest light guides or fibers.
LEDs have significant advantages over Xenon sources including longer life, energy efficiency, and in the case of the Berliner Glas modules, the ability to tune the color temperature of the light for better diagnostic information.
You can find more information on our website and in the technical data sheet.
Product category: Optical components
Prism s& Prism systems
With many years of production experience and the resulting expertise this brings, we are continuously challenging ourselves to create competitive advantages for and with our customers. We produce prisms and prism systems of the highest quality, flexibility and reliability for your applications.
We reliably integrate mechanical and electronic elements into the most ambitious optic prism systems for whatever specific application you have.
We produce prisms & prism systems of the highest quality according to customer specifications for use in the semiconductor industry, laser technology, medical technology, metrology and space technology.
We solve extreme challenges with regards to optical performance and the complexity of prism systems in their most ambitious application.
We reliably integrate mechanical and electronic elements into the most ambitious optic prism systems for whatever specific application you have.
We produce prisms & prism systems of the highest quality according to customer specifications for use in the semiconductor industry, laser technology, medical technology, metrology and space technology.
We solve extreme challenges with regards to optical performance and the complexity of prism systems in their most ambitious application.
- High precise manufacturing of prisms at the limits of measurement technology (PV λ/100; λ/500 RMS)
- Surface defects and quality far above laser classification
- Optical accuracy of prism systems up to 2" beam deviation errors, 20 µm optical path length difference or λ/10 of wave front accuracy
Product category: Other components, modules, OEM equipment
Stereo Zoom Lenses
The Berliner Glas Group develops and manufactures stereo zoom lenses for surgical and dental microscopes.
Our product line runs from 6x zoom lenses all the way to high-end 8x zoom parfocal lenses, also available with apochromatic color correction upon request. Minimized tolerance deviations between the left and right tubes ensure the optimal stereo enhancement.
Our product line runs from 6x zoom lenses all the way to high-end 8x zoom parfocal lenses, also available with apochromatic color correction upon request. Minimized tolerance deviations between the left and right tubes ensure the optimal stereo enhancement.
Product category: Endoscopes, Other components, modules, OEM equipment, Imaging systems, Camera systems
Visualization in the operating room.
Berliner Glas develops and manufactures customer-specific solutions for visualization in the operating room.
This includes these three points:
Berliner Glas is ISO 9001, ISO 14001 and ISO 13485-certified.
Talk to our experts!
This includes these three points:
- light source
- camera system
- 3D visualization
Berliner Glas is ISO 9001, ISO 14001 and ISO 13485-certified.
Talk to our experts!
Product category: Other components, modules, OEM equipment
Displays - Touch units - Frontglass assemblies
Your individual front assembly from a single source.
Our strength lies in the way we combine refining techniques. Depending on the properties and desired function of your product, we develop tailor-made solutions for you and provide you with ready-to-install display units, assembled and ready to be integrated into your system.
You as the customer determine the degree of configuration: From the electronic components within sub-assemblies, the glass cover, an assembly with front frames and clearly defined interfaces all the way to connecting to your system - everything is possible.
Our strength lies in the way we combine refining techniques. Depending on the properties and desired function of your product, we develop tailor-made solutions for you and provide you with ready-to-install display units, assembled and ready to be integrated into your system.
You as the customer determine the degree of configuration: From the electronic components within sub-assemblies, the glass cover, an assembly with front frames and clearly defined interfaces all the way to connecting to your system - everything is possible.
About us
Company portrait
The Berliner Glas Group develops and produces at five locations in Germany, Switzerland and China for the light-using industry. In cooperation with our customers we develop innovative system solutions with optical, mechanical and electronic components and bring them to production maturity. All these innovative solutions use light as a tool to analyze, structure, produce, communicate, measure and capture images.
Over the past years the Berliner Glas group has grown to over 1,600 employees. And we continue to trust in healthy growth in an innovative environment.
We are one of the world’s leading providers of optical key components, assemblies and systems as well as high-quality refined technical glass, e. g. for touch applications.
Over the past years the Berliner Glas group has grown to over 1,600 employees. And we continue to trust in healthy growth in an innovative environment.
We are one of the world’s leading providers of optical key components, assemblies and systems as well as high-quality refined technical glass, e. g. for touch applications.