OKW Odenwälder Kunststoffwerke Gehäusesysteme GmbH of Buchen at COMPAMED 2021 in Düsseldorf -- MEDICA - World Forum for Medicine
Manage stand orders
Select Option

OKW Odenwälder Kunststoffwerke Gehäusesysteme GmbH

Friedrich-List-Str. 3, 74722 Buchen
Germany
Telephone +49 6281 40400
vertrieb@okw.com

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Hall map

COMPAMED 2021 hall map (Hall 14): stand B42

Fairground map

COMPAMED 2021 fairground map: Hall 14

Contact

Michael Reimold

Stellv. Vertriebs- und Marketingleitung / Assistent Sales and Marketing Manager

Phone
+49 (0) 6281 404 122

Email
ReimoldM@okw.com

Stefan Hering

Business Development / International Sales

Phone
+49 (0) 6281 404 117

Email
HeringS@okw.com

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 06  Electrical components, electronical components
  • 06.02  Electromechanical components
  • 06.02.03  Enclosures
  • 06  Electrical components, electronical components
  • 06.02  Electromechanical components
  • 06.02.04  Switches

Our products

Product category: Enclosures

SLIM-CASE

SLIM HANDHELD ENCLOSURE FOR MOBILE APPLICATIONS

Mobile devices require functional and visually appealing packaging. Handy, flat dimensions, yet at the same time with a lot of volume, are ideal for universal installations and modern radio standards. The new SLIM-CASE series of handheld enclosures by OKW Gehäusesysteme, with their slim design and their choice of different operating fronts, is ideally suited for these mobile electronic applications.

Thanks to its design, the flat SLIM-CASE is ideal for modern handheld control units. It lies comfortably in the hand and looks particularly attractive. The enclosure range includes one top and one bottom part each, made of flame-resistant ASA+PC-FR (UL 94 V-0) in off-white (RAL 9002). Assembly is effected from behind, using four TORX stainless steel screws. This gives an attractive appearance, since no screw heads are visible. The SLIM-CASE is available in six versions in the dimensions (length x width x height) 148 x 74 x 19/22 mm. You can choose between three different operating panels:

  • Recessed 1.6 mm: for the use of a contoured transparent front screen or for membrane keyboards.
  • Recessed 1 mm: for applications with decor foils.
  •  Flat operating panel: for individual design and arrangement of operating and display elements of all kinds.
These three versions are each available with two different bottom parts: with or without raised pillar for the optional TPE intermediate ring in volcano. This increases the installation volume by 3 mm and also serves as shock protection. As a further accessory, there is a transparent front screen (rear side printable on request) to protect the displays underneath. The whole thing is fixed with an adhesive foil. With the intermediate ring the enclosures achieve protection class IP54 or IP65 with an optional seal, allowing the SLIM-CASE to be used both indoors and outdoors.

The slim design makes the enclosures ideal for the installation of flat electronic components as well as large-area displays and touch applications. The possible fields of application range from measuring and control technology, IoT/ Medical IoT, through health care, laboratory and medical technology and environmental technology to wireless communication. The SLIM-CASE can be modified as required, for example with mechanical processing for interfaces, the printing of company logos, painting in different gloss levels or in metallic paint, EMC aluminium coating, membrane keyboards and much more.

More Less

Product category: Enclosures

BODY-CASE

BODY-CASE is the new "wearable" case standard from OKW. The case design is predestined for wearable technologies: on the arm, around the neck, in shirt and trouser pockets or loosely inserted into clothing.
  • special housing for components and sensors worn on or near the body, available in 3 sizes
  • modern appearance with highly polished surfaces and matt TPV sealing ring
  • easy differentiation by using individual, exclusive watch straps (18 mm width)
  • easy to operate by means of buttons, touch screen, push button as well as voice commands or movements
  • high protection class IP 65
  • ASA material with high UV protection
  • Top part without / with recessed area for the protection of a decorative foil or membrane keypad
  • Enclosure mounting with four high-quality stainless steel screws with Torx drive; two spring clips for accessory mounting included with the enclosure
  • Optional accessories suitable for sizes L and M: wrist strap, clip-on set (clip, eyelet), storage station, charging cradle, etc.
  • Optional accessories suitable for size XL: wristband and clip-on set (clip, eyelet)

More Less

Product category: Enclosures

STYLE-CASE

OKW presents the STYLE-CASE with highly polished surfaces and thus sets an additional design highlight for modern handheld terminals. Thanks to pleasant haptics, the cases advance to a hand-flatterer with an elegant appearance, pleasant and safe to operate
  • high-quality ASA with high UV protection or in infrared-transparent material PMMA (Plexiglas)
  • glossy surface easy to clean
  • robust and tight up to IP 65, sealing set as accessory
  • Screw connection with stainless steel screws and Torx drive
  • recessed operating surface to protect the membrane keypads/decor foils
  • integrated battery compartment: 2 x 1.5 V AAA (S, M) and 2 x 1.5 V AA (L), contact spring set as accessory
  • Mounting domes for PCBs and built-in parts, self-forming screws for
  • As accessories

More Less

Product category: Enclosures

CARRYTEC

Uniquely, CARRYTEC offers a functional handle for a wide variety of indoor and outdoor tasks and situations.
  • non-slip carrying option above the centre of gravity of the case
  • CARRYTEC M in flat design for mounting of tablets or the like
  • rear mounting on tripod or support arm system; quick positioning/alignment of the viewing and operating area, clean cable routing
  • particularly large surface usable for user interfaces (S: 8.4"/21 cm; M: 10.4"/26 cm; L: 13.4"/34 cm)
  • large installation depth and plenty of space for interfaces with slim appearance
  • protected installation of interfaces
  • secured storage on desk console and/or wall mount; easy data and charging current transfer; contacts as accessories (except flat case)
  • Retaining clip for mounting on round tubes and equipment rails DIN EN ISO 19054
  • Enclosure in impact resistant plastic withstands hard use
  • with seal protection class IP 54 (accessory)
  • recessed control panel to protect the membrane keypad
  • Housings are easy to clean
  • Battery compartment for 5 x AA optional (machining required)
  • Protective bags for storage of instruments, sensors, accessories etc. (sizes S and M)
  • Mounting domes for circuit boards and built-in parts

More Less

Product category: Enclosures

SOFT-CASE

SOFT-CASE cases convince the user because their design and technology meet his current needs
  • handy formats with soft curves for pleasant haptics
  • unique "width orientation" allows larger displays to be accommodated in a small space in a user-friendly way, which makes it easier to both read the display and operate it
  • generous interface area on the long side for more flexibility
  • universally applicable as hand-held, desktop and wall-mounted enclosure
  • 4 sizes, optionally with intermediate ring for more installation height in different versions: ABS in the housing colour or chrome-plated, TPE material
  • in combination with TPE intermediate ring protection class IP 54 possible (enclosure versions without battery compartment in ABS or PMMA)
  • 2 materials: ABS (UL 94 HB) or PMMA infrared-transmissive (UL 94 HB)
  • without/with battery compartment for 2 x AAA, 2 x AA, 4 x AA or 1 x 9 V; battery compartment cover can be snapped on, secured by screw if required
  • recessed control panel to protect the membrane keypad/decor foil
  • Combi-Clip serves as clip-on and/or wall holder (accessory)
  • Mounting bracket for user-friendly inclined position
  • Mounting domes for circuit boards and built-in components

More Less

Product category: Enclosures

SMART-CONTROL

The SMART-CONTROL is the first enclosure for easy mounting in common room corners. In addition, the enclosure series can be used both on the wall and on the table in an ergonomic inclined position.
  • 2 sizes M and S
  • convex design or design with recessed control panel for membrane keyboards
  • high-quality material ASA+PC-FR with high UV protection in standard colour grey-white (RAL 9002)
  • Screw connection on the rear side of the enclosure with Torx stainless steel screws
  • optional seal (accessory) for IP 55
  • special wall bracket (accessory) for mounting the enclosures in 90° internal corners or on flat surfaces
  • Table holder set (accessories) enables a safe stand on the table in transverse orientation and an ergonomic reading angle of 45°
  • one board level each in the upper and lower part

More Less

Product category: Enclosures

CONNECT

The new CONNECT is predestined for wired applications.
  • two housing shells, convex and flattened with recessed surface
  • both shells are snapped to each other, no screw connection, this saves time in assembly and furthermore the front of the device is freely selectable
  • Recesses at both ends; to complete the enclosures, end caps and/or cable grommets can be used as required
  • three enclosure lengths
  • Housing shells and end caps made of UV-stabilised V-0 material
  • Protection class IP 40 (with end caps)
  • integrated strain relief for cable grommet set
  • sufficient space for the installation of compact displays, LEDs and USB plugs
  • recessed area for protection of membrane keypad, decorative foil or label
  • Mounting domes for PCBs and built-in components in the flattened housing shell
  • Retaining clip for round tube up to ø 32 mm as accessory (for case lengths 116 and 156 mm)
  • Holder for safe storage on the wall or similar as accessory

More Less

Product category: Enclosures

PROTEC

The PROTEC is characterised by a square basic shape with a soft contour guide. Due to this, the wall and desk case is optimally suited for modern electronic applications indoors as well as outdoors.
  • three sizes 140/180/220, each in the 3 versions
  • Version I - With recessed area for installation and protection of interfaces or supply lines.
  • Version II - Includes an additional cover for the interface area in addition to the top and bottom parts.
  • Version III - Allows additional volume for built-in components due to its high cover.
  • ergonomically inclined operating surface by 20
  • recessed operating panel for installation and protection of the membrane keypad, operating elements and touch systems (PROTEC 140: 5.7"/14.5 cm, PROTEC 180: 7"/17.8 cm, PROTEC 220: 8.4"/21.3 cm)
  • Housing screw connection outside the visible area
  • high-quality V0 material in grey-white (RAL 9002) and optional protection class IP 65 (seal as accessory) for robust applications
  • sealed electronics compartment with 3 PCB levels; plenty of space for built-in components
  • concealed, flush wall mounting with removal protection (wall bracket in accessories range)
  • stainless steel screws with secure Torx drive
  • Rubber feet give the table units a non-slip stand

More Less

Product category: Enclosures

EVOTEC

In a robust design and at the same time appealing design, the EVOTEC enclosures are ideally suited for harsh working environments. Different operating fronts offer a large design freedom.
  • soft contours provide an elegant appearance
  • optionally available with a flat top part or as a desk version with a 12° ergonomically inclined operating surface
  • largest possible operating surface for switches, buttons and touch displays
  • Desk version without/with recessed operating surface to protect the membrane keypad/decor foil
  • Evotec sizes
  • with flat top: sizes 80, 100, 125, 150, 200 and 250
  • as desk version: sizes 150, 200 and 250
  • Installation of boards in the top and bottom part possible
  • high-quality ASA+PC-FR with high UV protection in standard colour grey-white (RAL 9002)
  • high degree of stability
  • Seal for protection class IP 65 as accessory
  • Rubber feet provide a secure stand on the table
  • Screw connection with stainless steel screws and Torx drive

More Less

Product category: Enclosures

MEDITEC

Convincing design features characterize the MEDITEC enclosure family and form the basis for an adequate, spacious enclosure system for high-quality functional assemblies.
  • elegant and functional design
  • versatile for table, wall and mobile use
  • high stability due to grid-like ribbing
  • easy to assemble housing construction
  • 4 sizes, adapted to Eurocard formats single, double and extended
  • 2 standard heights, for further heights two intermediate parts can be mounted by means of a connector
  • ergonomically inclined front panel; when using an intermediate part, the front panel closes the opening optimally
  • Plastic front/rear panels with identical surface quality, easy to machine
  • slide-on panels with/without ventilation; optionally in housing colour or lagoon colour, individual colour selection on request
  • Case feet for safe stand included
  • efficient wall mounting with fixing straps
  • Versions with handle; can be used as a carrying handle when travelling, if required the adjustment mechanism in 30° steps allows the user a favourable set-up angle on site
  • Mounting domes for circuit boards and built-in components

More Less

Product category: Switches

TOP-KNOBS

Our TOP-KNOBS are unique in design and thus the ideal solution for all users who are looking for something special. Coordinated marking parts define the function of the rotary knob and give your devices a pleasing, contemporary look.

  • aesthetically sophisticated rotary knob design *** iF product design award ***
  • lateral screw mounting on round shaft ends to DIN 41591 or for mounting on shafts with flattened shaft ends ø 6/4.6 mm (the shaft flattening faces the insertion opening for the marking parts)
  • individual, functional marking parts, e.g. for fine scaling, snap securely into the knob and conceal the side screw fastening
  • the fastening technology excludes any contact with live parts
  • for use on rotary potentiometers, the axis mount is recessed so that there is also room for external nuts and the rotary knobs are flush with the front panel
  • modern colour combinations in pastel shades

More Less

Product category: Switches

COM-KNOBS

The aesthetic design and the choice of colours in pastel shades distinguish the COM-KNOBS with the proven collet system.

  • pleasing knob design for a modern, innovative image of the devices
  • Cover with matt chrome surface for a noble metallic look (sizes 23-40)
  • safe operation due to proven collet fastening
  • convenient knob mounting from the front and secure fit on the axle
  • can be used with/without marking part Peak
  • from size 40 cover with/without finger recess for rational handling when adjusting
  • Combination with disc, scale disc, stator or nut cover possible
  • the design is based on the TOP-KNOBS series; thus you have the guarantee of a uniform appearance when using both rotary knob techniques
  • modern colour combinations in pastel shades

More Less

Product category: Switches

STAR-KNOBS

The OKW STAR-KNOBS are designed as operating elements with rotary function and, with a corresponding rotary encoder, also with jog function for menu-controlled interfaces. This means that many functions can be operated with just one knob. The optional lighting sets an impressive accent for a modern device design.

  • innovative knob design available as recessed or surface-mounted version
  • in the flush-mounted version, the STAR-KNOBS form an attractive transition between the knob and the front of the device; knobs in translucent design can be illuminated if required, i.e. a ring sparkles between the recess and the knob cover
  • in the surface-mounted version, the knob design is convincing thanks to its body which is slightly inclined towards the inner axis, thus enabling ergonomically favourable operation; the knob sits on an approx. 3 mm high ring which can be illuminated if required
  • Illumination with modern, energy-saving SMD-LED technology for power supplies with 5 V: optionally white backlight for the colours diamond, ruby, emerald and sapphire as well as RGB backlight for individual lighting results as accessories
  • Knob without/with knobs
  • Lid with/without finger recess for rational handling during adjustment
  • proven collet system with secure fit on the axis
  • max. torque: assembly = 1.5 Nm, function = 1.2 Nm

More Less

Product category: Enclosures

SYNERGY

The new SYNERGY combines the advantages of plastic and aluminium in a single enclosure concept:
  • modern range of enclosures in 4 basic geometric shapes - square, rectangle, circle and oval *** iF product design award ***
  • 36 enclosure sizes with plenty of space for electronics and operating elements
  • Screw connection with stainless steel screws and Torx drive
  • Colour combination: aluminium silver anodized / plastic parts black
  • plenty of space for interfaces, no bevels, easy mounting
  • recessed area in the upper part for decorative foils or membrane keypads
  • Lower part with opening and cover for screwing: practical for the use of a battery compartment or as access to the interior, e.g. for memory card or batteries directly attached to the board; battery compartment set, battery clips and button cell holder as accessories
  • Cable outlet in the bottom part (extra flat network cable, round cable up to ø 4 mm)
  • Extender (to increase the dome height) and wall bracket as accessories
  • individual housing solutions on request

More Less

Product category: Enclosures

SMART TERMINAL

The new SMART-TERMINAL aluminium profile enclosure offers robustness and elegance thanks to its matt anodised finish. Visually appealing, plenty of space for large-volume installations, a multitude of technical advantages, individual lengths of the aluminium profiles on request and creative design options make the SMART-TERMINAL the non-plus-ultra among display enclosures for "tougher demands".
  • 3 basic housings in profile lengths 160 mm, 200 mm and 240 mm (total length with cover caps + 42 mm or with aluminium end plates + 4 mm), width 170 mm, height 50 mm
  • Cover caps in lava (similar to anthracite) made of high-quality plastic ASA+PC-FR
  • Design seals made of TPV material in lava or green
  • optionally with simple aluminium plates as side finishes
  • versatile use as table-top, desk-top and wall-mounted enclosure
  • recessed control panel for installation and protection of displays, membrane keyboards and control elements
  • (SMART-TERMINAL 160: 5.7"/14 cm; SMART-TERMINAL 200 & 240: 7"/17.8 cm)
  • horizontal PCB guides and screw channels inside the housing
  • two-part aluminium profile facilitates case assembly and installation of components; screw connection outside the visible area
  • flat surfaces for easy installation of interfaces
  • lateral cover caps with recessed area for protection of cables and connectors
  • optional accessories: wall bracket set, desk stand set for ergonomically favourable reading angle of 12°, square nut set for board mounting
  • Special sizes and designs: individual profile lengths from 100 pieces on customer requestDesign seals and cover caps in other colours as a creative, visual feature from 200 pieces on request

More Less

Product category: Enclosures

SMART PANEL

Intelligent systems for convenient control and monitoring of the entire building technology can be integrated in the SMART-PANEL series of enclosures. The elegant appearance fits seamlessly into modern residential/commercial and industrial environments.
  • slim housing design in 2 sizes: square 84 x 84 mm and rectangular 155 x 84 mm
  • prepared for mounting on common flush-mounted / cavity wall boxes with max. installation opening 61 mm / double device boxes as well as larger, international installation boxes up to max. height - 150 mm / width - 61 mm
  • exciting optics - lower part highly polished, upper part with fine surface structure
  • high-quality V0 material ASA+PC-FR in traffic white (RAL 9016)
  • rational, screwless housing mounting with snap-in function - enables significant advantages for subsequent connection activities on site
  • flat, recessed area for USB, mini-USB connectors etc. and for opening the enclosures using separate detents (available in pairs as accessories)
  • recessed control panel to protect membrane keyboards, display/control elements, touch displays etc.
  • Mounting of the built-in parts in the upper part. Pluggable phenolic resin hard paper plate (accessory) protects the electronics underneath from damage during assembly/service if required.
  • Glass plate for high-quality applications included in the range of accessories, e.g. for use with displays etc. Rear printing possible on request

More Less

Product category: Enclosures

MINITEC

The MINITEC enclosures convince the user with mini dimensions and maximum benefit. You can choose between two designs: "MINITEC EDGE" and "MINITEC DROP".
  • modern, flat styling *** iF product design award ***
  • easy to wear and always within reach, e.g. on a neck strap or bracelet, with a hand loop, on a key ring or belt
  • Intermediate rings in various designs and colours to choose from; TPE material for pleasant grip and shock protection
  • ABS (UL 94 HB), optionally in infrared-transparent PMMA Plexiglas material
  • recessed control panel to protect the membrane keypad/decor foil; MINITEC Edge also available without recess
  • Protection class IP 41: types E (size M) and D (sizes S and M) with intermediate ring in TPE, all others IP 40
  • available as assemblies for individual combinations, 3 sizes each

More Less

Product category: Switches

CONTROL-KNOBS

New ergonomic CONTROL-KNOBS have a soft-touch surface which is easy to grip and feels comfortable in operation. The high-quality appearance – illuminated if required – distinguishes this advanced range of tuning knobs as the central element of menu-driven interfaces.

  • soft-touch surface ensures good grip and anti-slip operation
  • innovative two-part plastic tuning knob design comprises a hard inner knob body made of high-quality PC and a soft-touch TPE outer shell with functional grooved appearance
  • available in two knob sizes, ø 36 mm and ø 46 mm, each in two standard TPE colours (nero and volcano)
  • CONTROL-KNOBS with/without pointer line on the side for fine scaling
  • CONTROL-KNOBS 36 with/without optional LED illumination
  • illumination options: translucent optic ring on the top surface /  translucent optic ring on the top surface with a pointer line on the side
  • optional illumination uses modern, energy-saving SMD LED technology for 5 V power supply units (RGB LEDs allow individual illumination and colours)
  • designed as modern control knobs for rotary potentiometers or encoders; also suitable for rotary touch/click functions used on menu-driven interfaces – typically employed on devices made in high volumes
  • tried and tested collet fixture system with secure fit on the axle
  • max. torque: installation = 1.5 Nm, function = 1.2 Nm

More Less

Company news

Date

Topic

25 Oct 2021

EVOTEC ENCLOSURE RANGE: NEW SIZE 125

The EVOTEC range of table-top enclosures, already consisting of 5 standard enclosures, has been supplemented by a further version. The new "EVOTEC 125" version optimally rounds off the product portfolio between the sizes 100 and 150.

The EVOTEC enclosure in the standard colour off-white (RAL 9002) is optionally available with a flat top part or as a desk-top version. The following sizes are available: the smallest size with the dimensions 80 x 50 x 22/26 mm (L x W x H), the top part has a flat surface. Four other standard sizes are also available: 100 (100 x 62 x 26/31 mm), 150 (150 x 93 x 35/45 mm), 200 (200 x 124 x 45 mm) and 250 (250 x 155 x 54 mm). The last three versions are also available with an operating surface ergonomically inclined by 12°. There are two more new flat versions with the following dimensions:
  • 125 x 78 x 30 mm (for compact installations with a flat top part)
  • 125 x 78 x 37 mm (for more installation volume with a high top part)
The housings are made of UV-resistant ASA+PC-FR material. Outdoor applications are made possible by an optional seal (protection class IP 65). Non-slip rubber feet ensure reliable desk-top positioning. Other accessories include self-tapping screws for mounting PCBs, a wall suspension element for sizes 200/250 and mounting hardware for standard DIN rails.

The variable plastic enclosures have a modern appearance, coupled with useful features: their soft contours make them look elegant and the straight, raised surfaces allow the easy integration of plug/network connections. The flat enclosures can be used horizontally or vertically, depending on the application. Various options for customer-specific modification are available in the in-house service centre, including mechanical processing, painting, printing and laser marking, EMC protection measures and assembly work to complete the units. 

More Less

15 Sep 2021

EMERGENCY CALL AND ASSISTANCE SYSTEMS PROVIDE SECURITY FOR OLDER PEOPLE

Sudden fall. Getting up under your own power is no longer possible and you may even have suffered a serious injury. This is where emergency call systems can be of decisive help! They support senior citizens and people in need of help in their daily lives, warn them of dangers and, in an emergency, notify their relatives or the rescue service. Enclosures from OKW make a decisive contribution to this - whether as a portable version on the body, fixed to the wall or as a base station on the table.

THE INITIAL SITUATION
The fear scenario for many single seniors is simply: What happens if I fall down and nobody notices? It can happen at any time! With increasing age, the ability to see and hear declines. Muscle strength, coordination and reaction speed decline, and chronic illnesses often make life more difficult for many older people. Emergency call and assistance systems, however, give seniors the necessary security to master everyday life and relatives a good feeling, even if they are not in the immediate vicinity. With both home emergency calls and mobile emergency calls, seniors carry a mobile transmitter with them. If something happens to them, they press the button on this transmitter. This causes the device to trigger an alarm at an emergency call centre, which immediately attempts to contact the person concerned. If this is not possible or if there is an emergency, the emergency call service staff will inform relatives, the family doctor or the ambulance service as required.

HOUSINGS FOR PORTABLE SYSTEMS
OKW's wearable cases are perfectly suited for these mobile emergency call applications. The BODY-CASE, for example, can be worn on the wrist like a watch. With the wide range of accessories, however, there are many more possibilities: wearing around the neck with a neck strap, wearing on the body or pockets with a clip-on or simply loosely inserted. The case series can be delivered in 2 different sizes, with and without recessed control panel. The intermediate ring made of soft TPE material enables optical differentiation (e.g. for special injection moulding from 200 pieces in individual company colour) and the high protection class IP65. Thus the electronic components are protected against water jets when washing hands or cleaning.

TRANSMISSION OF THE EMERGENCY CALL
In the classic version, emergency call systems for senior citizens transmit the emergency call via radio from the hand-held transmitter to the base station. The base station immediately alerts the stored telephone number. Base stations can be used as tabletop versions or space-saving wall-mounted versions. The OKW housing portfolio includes a wide range of options for this - depending on the required volume of the built-in electronics, the number of keypads/operating elements and the customer's personal design preferences. That is why we are "picking out" a series of enclosures called SYNERGY at this point. The desktop and wall-mounted enclosures are characterised by their high-quality appearance, consisting of an aluminium profile with a top and bottom part each made of black plastic. There are 36 enclosure sizes available in 4 basic shapes: round, oval, rectangular and square. The SYNERGY, like pretty much all OKW enclosures, can be modified according to individual customer requirements, with e.g. printing, mechanical processing for interfaces/displays, a paint finish and much more.

MORE SAFETY WITH AAL ASSISTANCE SYSTEMS
Intelligent assistance systems (AAL Ambient Assisted Living) go one step further, in addition to the pure emergency call function. The basis is a self-learning system in which sensors are networked with each other to collect and evaluate data. In this way, routine tasks and habits of the senior citizens are recorded. AAL systems can, for example, automatically take over the control of lighting and room temperature. Another possibility could be fall sensors in the floor, which detect if a person is lying on the floor for a long time. Sensors in ceilings/walls or in the shower check the resident's movement profile and also trigger an emergency message in the event of deviations or need. You can find an application example under the attached link. The AAL assistance system collects information as well as sensor readings and thus enables early hazard detection and reminder function. For example, if someone leaves their home while the cooker is still on, the system can issue a warning or switch the appliance off automatically.

More Less

15 Sep 2021

ENCLOSURES AND TUNING KNOBS FOR MEDICAL APPLICATIONS

"SAVE LIVES, HEAL ILLNESSES AND IMPROVE PEOPLE'S QUALITY OF LIFE"

Medical technology is a highly regulated but also continuously growing industry. The focus is on people – products, equipment and processes are constantly being developed and manufactured for the prevention, diagnostics and therapy of diseases. High-quality empty enclosures and tuning knobs by OKW make a significant contribution here.

Medical technology is an vital market for us ! In day-to-day use by doctors, nurses or patients themselves, products are required for a variety of applications: whether as emergency systems, observation and alarm equipment, analysis/diagnostics/therapy devices, tracking and monitoring, the medical IoT, AAL systems and ergonomic remote controls (wireless or wired). OKW has suitable solutions in its product portfolio for all these medical "cases". Here are some examples:

CARRYTEC - PLASTIC ENCLOSURES WITH FUNCTIONAL HANDLE
The integrated handle and the particularly large surface that is ideal for user interfaces are the key features of the CARRYTEC enclosure range. But there is much more technical know-how behind it, and this allows a wide range of possible applications in medical and laboratory technology. Mobile use, e.g. as a patient simulation system, can be effected easily and ergonomically thanks to the functional carrying handle. The CARRYTEC is available from stock in 3 sizes, each in the colours lava or off-white (RAL 9002): size S has the dimensions 222 x 205 x 80 mm, M has 270 x 247 x 91 / 42 mm and the L version 348 x 303 x 117 mm (W x H x D). Separate protection bags for storing instruments, sensors and accessories can be attached to the sides of the enclosures in the S and M versions. Thanks to its generous installation depth, CARRYTEC offers plenty of space for interfaces, yet has a slim appearance. The CARRYTEC can be attached to rectangular DIN standard rails or round tubes with a separately available holding clamp. Rear installation on tripod or support arm systems - then rotated by 180° - allows fast positioning/alignment of the viewing and operating panels.

BODY-CASE - COMFORTABLE TO WEAR ON THE BODY
In medical technology, not only large-volume devices are required, ergonomic handheld enclosures and portable technologies (Wearable Technologies) are also becoming increasingly popular. They collect and supply important data, e.g. on patients’ health status, they report and monitor the location of persons in care facilities who are in need of help, allow an alarm or emergency call to be made, and so on. The BODY-CASE was developed precisely for such purposes. The enclosure shells are highly polished and are made of ASA (UL 94 HB) in traffic white (RAL 9016). The matt TPV 50A sealing ring is available in the colours vermilion (RAL 2002) as well as lava (similar to anthracite) and guarantees the high protection class IP65. The dimensions of the BODY-CASE L are 55 x 46 x 17 mm (L x W x D), while the M version has the dimensions 48 x 40 x 14.5 mm. With the help of the wide range of accessories such as wrist straps, belt / pocket clips, carrying straps or lanyards, the units can be carried comfortably on the wrist, on clothing or around the neck. After use, a station ensures safe storage of the wearable device.

TUNING KNOBS – FOR THE RELIABLE OPERATION OF MEDICAL DEVICES
OKW Gehäusesysteme has a wide range of modern tuning knobs for operating medical devices, such as intensive care ventilators etc.
The TOP-KNOB range of tuning knobs is particularly suitable for rotary potentiometers with round shaft ends in accordance with DIN 41 591 as well as flat shaft ends with diameters of 6/4.6 mm. Mounting is effected from the side by means of a threaded pin, or simply by pushing them onto shafts with flattened ends. The lateral screw fixture is innovatively concealed by functional marking elements in different colours and shapes. TOP-KNOBS are available in 5 diameters (16/20/24/31 mm and 40 mm) as well as in the two standard colours nero and volcano.

The main characteristic of COM-KNOBS is their modern appearance. Assembly is effected by means of a tried and tested collet fixture for electromechanical rotary potentiometers with round shaft ends in accordance with DIN 41 591. The design of this series of tuning knobs is based on that of the TOP-KNOBS with an identical choice of colours and materials as well as the same 5 sizes (with an additional sixth version with a diameter of 50 mm). This allows a homogeneous appearance if both knob types are used.

As standard, the series of tuning knobs consists of three components: the basic body, the cover and the marking element. Closed versions without corresponding marking elements are also available for universal use or if additional parts such as dials are required. To ensure rational handling while operating or adjusting the end devices, covers with finger recesses are available for the two largest variants, 40 and 50 mm.

More Less

14 Sep 2021

CONTROL KNOBS - MODERN ROTARY KNOBS WITH HIGH OPERATING COMFORT

With the new CONTROL-KNOBS, OKW Gehäusesysteme offers an advanced series of rotary knobs as a central element of menu-controlled interfaces. The grip surface made of soft-touch material enables easy gripping, a pleasant feel and ergonomic operation. The high-quality appearance can also be illuminated if required.

The modern CONTROL-KNOBS are designed for user-friendly use and consist of hard and soft plastic components: Button base body made of high-quality PC (UL 94 HB), encased in a soft TPE material with a functional grooved look. Due to the soft-touch material, the new knobs have a high grip with anti-slip effect. The CONTROL-KNOBS are mounted using collets which guarantee a secure fit on the shaft - ideally suited for rotary potentiometers/pulse generators with round shaft ends according to DIN 41 591. For final assembly, a cover made of PA 6 (UL94) is attached to the base body. The CONTROL-KNOBS are available in the standard colours nero and vulcan in the following sizes:
  • ø 36 mm, with axle hole 6 mm and 1/4" (6.35 mm)
  • ø 46 mm, with axle hole 6 mm and 1/4" (6.35 mm)
Both sizes are available with/without lateral pointer line for fine scaling. As an optical highlight for the ø 36 mm version, an optional illumination sets an impressive accent. The smaller CONTROL-KNOBS can be equipped with energy-saving SMD LED technology for individual lighting results. In this variant, the basic knob body is not traffic white, but made of translucent material. This results in the following lighting options:
  • Ring optics on the cover surface
  • Ring optics on the top surface with lateral pointer line
For the illumination of the ring, the base available in the accessories range, together with the LED illumination (RGB backlight), is necessary. Application areas include measurement and control technology, medical and laboratory technology, smart factory, communication and much more. In order to adapt the buttons to special customer requirements, they can be modified by means of printing or laser inscription on the cover surface/lid.

More Less

14 Sep 2021

SMART-PANEL - ELEGANT WALL-MOUNTED HOUSING FOR MODERN CONTROL PANELS

OKW Gehäusesysteme presents the new wall-mounted enclosure series SMART-PANEL. The elegant look in square or rectangular design can be seamlessly integrated into modern residential/commercial and industrial environments. The enclosures are ideal for convenient control and monitoring of the entire building technology.

Due to their attractive design, SMART PANELs blend in perfectly with their surroundings. Conceivable applications include wired control/operating centers or radio-networked devices in the smart home, applications in the IIoT, access control, monitoring devices, data acquisition systems, in medical technology and much more. The SMART PANEL is available from stock in 2 sizes (height x width):

  • Square shape with 84 x 84 mm. This version is prepared for invisible mounting on common flush-mounted/cavity wall boxes (Germany, Belgium, Switzerland, Austria with a max. installation opening of 61 mm).
  • Rectangular shape with 155 x 84 mm. This version is prepared for invisible mounting on simple flush-mounted boxes (Germany, Belgium, Switzerland, Austria up to max. installation opening of 61 mm), double flush-mounted boxes as well as larger installation boxes (e.g. in Italy, Great Britain and the USA) up to max. height of 145 mm and width of 74 mm.
Both versions are manufactured in traffic white (RAL 9016) from high-quality ASA+PC-FR (UL 94 V-0). The lower part of the housing is highly polished, the upper part has a fine surface structure with a recessed control panel for membrane keyboards, display/control elements and touch displays. Mounting is by means of a snap-in function without screws. The enclosure series has protection class IP 40, sufficient for indoor applications. The range of accessories includes a louvre to open the enclosures, hard paper plates to protect the electronic components and a glass pane for e.g. display applications. The SMART PANEL has a flat, recessed surface for USB or mini-USB connectors.

A wide range of modifications can be made to meet individual customer requirements on request. These include cut-outs for operating/display elements and interfaces, printing, labelling, EMC aluminium vapour deposition, special colours/materials, decorative foils and assembly activities.

More Less

About us

Company portrait

OKW offers elegant, ergonomically favorable standard enclosures and tuning knobs for the medical and laboratory technologies. As one of the leading manufacturers of standard enclosures made of plastic an aluminium, we sell our solutions worldwide.

We can process and modify our enclosures and tuning knobs according according to individual customer needs, e.g. with CNC processing, painting and printing, EMC coating, assembly activities and much more.

Company data

Sales volume 10-49 Mio US $
Export content max. 50%
Number of employees 100-499
Foundation 1984
Area of business Components, parts, modules, Original Equipment Manufacturers