SMC Deutschland GmbH

• self-priming pump
• wide range of pump volumes 5 to 200 µl per stroke (individually adjustable)
• very compact design and high repeatability +/- 1%
• adjustable pump volume
• maintenance-free
• Choice of chemically resistant materials for adaptation to a wide range of applications

• media-separated, directly actuated valves
• available in nominal orifice diameters from 0.8 to 2 mm
• enables a wide range of applications in analytics
• compact and space-saving
• very low dead space volume (good "flushability")
• special rocker technology with guaranteed volume-neutral switching (max. 0.1 µl volume displacement)
• high chemical resistance, through the use of PEEK - PFA and EPDM - FKM - FFKM (Kalrez ®)
• very high quality standard, long life

• media-separated, directly actuated valves
• available in nominal diameters from 0.8 to 3.5 mm
• allows a wide range of applications in analytics
• compact and space-saving
• very low dead space volume (good "flushability")
• special rocker technology with guarantee of volume-neutral switching (max. 0.1 µl volume displacement)
• high chemical resistance, due to the use of PEEK and FFKM (Kalrez ®)
• very high quality standard, long lifetime

• Compact solenoid diaphragm pump
• self-priming pump
• wide range of pump volumes 5 to 200 µl per stroke (individually adjustable)
• very compact design and high repeatability +/- 1%.
• adjustable delivery volume
• maintenance-free
• Choice of chemically resistant materials for adaptation to a wide range of applications

• used medium does not come into contact with the valve
• high durability of the hose, no dead volume
• available for hose outer diameter: 3,2 mm / 4 mm / 6 mm
• the hose can be changed quickly due to a simple and quick assembly

• available in nominal diameters 10 to 25 mm
• suitable for gases and liquids (body material brass and stainless steel)
• Pilot control without operating differential pressure (0 MPa)
• Protection class IP65
• Connection variants thread or plug-in connection

• valuable installation space can be reduced due to the very small valve width (from 6 mm to 10 mm)
• Flow rates from 8 to 24 l/min
• Lower energy costs and resource-saving use: power consumption of the magnetic coil from 0.1 W
• ideal for mobile applications due to its low weight
• various operating voltages available: 3 VDC, 5 VDC, 6 VDC, ...
• Availability of a wide range of special SMC variants: e.g. low leakage or oil and grease-free, PCB mounting, etc.

All relevant data at a glance: Digital pressure switches with 3-part display for simultaneous visualisation of measured values and settings

• Measuring ranges: -100 kPa to 10 MPa
• Membranes: silicon (for gases), stainless steel (for gases and liquids), aluminium oxide (for gases and liquids)
• Signal outputs: current, voltage, digital output (PNP, NPN), IO-Link

• available in nominal diameters from 1.0 to 3.2 mm
• suitable for gases and liquids (body material aluminium and plastic (PPS), brass & stainless steel)
• low weight and compact design
• Power consumption 2.5 W or 3 W
• maximum operating pressure up to 0.9 MPa
• Connection variants thread or plug-in connection

• available in nominal diameters from 2 to 10 mm
• suitable for gases and liquids (body material aluminium and plastic (PPS), brass and stainless steel)
• low-noise design due to integrated damping disc
• Power consumption 4.5 W, 7 W or 10.5 W
• maximum operating pressure up to 1.0 MPa
• Connection variants thread or plug-in connection

• the media is separated by the tubing, does not come into contact the valve
• high durability of the hose, no dead volume
• available for hose outer diameter: 3 mm / 4 mm / 6 mm
• the hose can be changed quickly and easily due to simple and quick installation

• Geometry of the manifold is individually adapted to function and installation space
• manufacturing process:
  Diffusion or adhesive bonding (dead space free designs possible)
  - Laser Welding
  - 3D printing
  - Injection moulding
  - Machining
• suitable for gases and liquids
• chemical & temperature resistant materials
• Fluidic memory and logic elements can be integrated
• Delivery of finished assemblies including mounted valves, controllers, sensors, etc.

• 10 mm wide, 10 mm high, 38 mm long and only 10 grams light
• in the operating pressure range of 0 - 0.2 MPa, enormous flow rates of up to 90 l/min are possible
• Response time maximum 15 ms
• Power consumption only 0.7 Watt (with option Power Saving)
• suitable for air and inert gases

• precious mounting space can be reduced due to the very small valve width (from 6 mm)
• Flow rates from 8 to 24 l/min
• lower energy costs and resource-saving use: power consumption of the solenoid coil from 0.1 W
• ideal for mobile applications due to its low weight
• various operating voltages available: 3 VDC, 5 VDC, 6 VDC, ..
• Availability of various SMC special variants: e.g. low leakage or oil and grease-free, PCB mounting, etc

• High flow in a compact size: For fast application and short cycle times
• Lightweight and compact in design: Suitable for robot installations
• Existing SMC fieldbus modules are compatible: Easy conversion of existing systems to JSY valve series
• Large tube diameters can be used: Higher flow rates are possible

• available in water- or air-cooled version
• Cooling capacity: 0.95/1.0/1.6/2.0/2.5 kW (50 Hz)
• Temperature stability: ±0.1 °C
• Temperature setting range: 5 to 35 ºC; 15 to 35 ºC (HRR010)
• space-saving design, 19-inch rack mounting

• Measuring ranges: -100 kPa to 10 MPa
• Diaphragms: silicon (for gases), stainless steel (for gases and liquids), aluminium oxide (for gases and liquids)
• Signal outputs: current, voltage, digital output (PNP, NPN), IO-Link

• available in water- or air-cooled version
• Cooling capacity: 0.95/1.0/1.6/2.0/2.5 kW (50 Hz)
• Temperature stability: ±0.1 °C
• Temperature setting range: 5 to 35 ºC; 15 to 35 ºC (HRR010)
• space-saving design - 19-inch rack mount

• 10 mm wide, 10 mm high, 38 mm long and only 10 grams light
• in the operating pressure range of 0 - 0.2 MPa, enormous flow rates of up to 90 l/min are possible
• Response time maximum 15 ms
• Power consumption only 0.7 Watt (with Power Saving option)
• Suitable for the media air and inert gases

• Ionizer for the reduction of electrostatic charge
• Rod, point and blower version
• Easy operation and maintenance
• Self-diagnostic function with LED display
• Optional controller with automatic balancing sensor for measuring electrostatic charge

• available in nominal orifice diameters from 1.0 to 3.2 mm
• suitable for gases and liquids (housing material aluminium and plastic (PPS), brass & stainless steel)
• low weight and compact design
• Power consumption 2.5 W or 3 W
• maximum working pressure up to 0,9 MPa
• Connection variants thread or plug connection

• Geometry of the manifold is individually adapted to function and installation space
• Manufacturing process:
  - Diffusion or adhesive bonding (dead space free designs possible)
  - Laser welding
  - 3D printing
  - Injection Molding
  - Machining
• suitable for gases and liquids
• Fluidic accumulators and logic elements can be integrated
• Delivery of finished assemblies including mounted valves, controllers, sensors, etc.

• Metal or soft-seated valves, depending on your requirements
• Variety of functions on one multiple sub-base
• Greater flexibility for safety-related applications (validated in accordance with EN ISO 13849 principles)
• Excellent all-rounder: the valve terminal can be configured exactly to your requirements
• compact for high flow rates

• high flow with compact size: For fast application and short cycle times
• light and compact design: Especially suitable for installations on robots
• existing SMC fieldbus modules are compatible: easy conversion of existing installations to JSY valve series
• large tube diameters can be used: Thus higher flow rates are possible

• available in nominal orifice diameters 10 to 25 mm
• suitable for gases and liquids (housing material brass and stainless steel)
• Pilot control without operating differential pressure (0 MPa)
• Protection class IP65
• Connection variants thread or plug connection

• available in nominal orifice diameters from 2 to 10 mm
• suitable for gases and liquids (housing material aluminium and plastic (PPS), brass and stainless steel)
• low-noise construction due to integrated damping disc
• Power consumption 4.5 W, 7 W or 10.5 W
• maximum operating pressure up to 1.0 MPa
• Connection variants thread or plug connection

• designed for a wide range of applications – including vacuum 0.1Pa.abs
• the PVQ valve accurately adjusts the flow rate smoothly and precisely by controlling the electrical input current externally
• due to the valves special coated internal moving parts both the operational service life has been extended to over 25 million cycles
• noise emitted during the valve opening and closing has been reduced to a minimum
• the valve is available with brass or stainless steel body parts and FKM seal material

• Ionizer for the reduction of electrostatic charge
• bar, point and blower design
• easy operation and maintenance
• self-diagnosis function with LED display
• optional controller with automatic calibration sensor for measuring electrostatic charge

• metal or soft-sealing valves, depending on your requirements
• variety of functions on one multiple connection panel
• more flexibility for safety-relevant applications (validated according to the principles of EN ISO 13849)
• excellent all-rounder: the valve terminal can be configured exactly to your requirements
• compact at high flow rates

• Controller with ion balance display
• easily accessible installation, thus better reading and adjustment possibilities
• the bayonet lock allows a quick exchange of the electrode needle in case of wear / cleaning possible
• Supply voltage 24 V, use of the unit directly in the machine possible
• Integrated compressed air connection
• Controller for up to 4 bars: High flexibility in use

• Controller with ion balance display
• easily accessible installation, therefore better reading and adjustment possibilities
• the bayonet closure allows a quick exchange of the electrode needle in case of wear / cleaning possible
• Supply voltage 24 V, the device can be used directly in the machine
• Integrated compressed air connection:
• Controller for up to 4 bars: High flexibility in use