All Sensors GmbH of Gröbenzell at COMPAMED 2021 in Düsseldorf -- MEDICA - World Forum for Medicine
Manage stand orders
Select Option

All Sensors GmbH

Am Weidegrund 8, 82194 Gröbenzell
Germany
Telephone +49 8142 421977-0
Fax +49 8142 421977-9
info@allsensors.eu

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Hall map

COMPAMED 2021 hall map (Hall 13): stand E74

Fairground map

COMPAMED 2021 fairground map: Hall 13

Contact

Veit Riebel

Geschäftsleitung

Phone
+49 8142 421977-0

Email
vriebel@allsensors.eu

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 05  Components, modules, OEM equipment
  • 05.05  Pumps

Pumps

  • 05  Components, modules, OEM equipment
  • 05.06  Valves

Valves

  • 06  Electrical components, electronical components
  • 06.01  Sensors
  • 06.01.04  Pressure sensors
  • 06  Electrical components, electronical components
  • 06.01  Sensors
  • 06.01.05  Flow sensors

Flow sensors

Our products

Product category: Pressure sensors

BLV series

The basic BLV series sensor is based on All Sensors' CoBeam²™ technology. The device provides a high output signal at a low operating voltage, reducing the overall supply voltage while maintaining comparable output levels with conventional equivalent sensor elements. This lower supply voltage results in improved warm-up, while the CoBeam²™ technology itself reduces susceptibility to package stresses, resulting in improved long-term stability. The technology also improves position sensitivity compared to conventional single chips. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. The output is ratiometric to the supply voltage and can operate from 0.9 to 1.8 volts DC.


Features
1 to 30 inH2O
0.9V to 1.8V supply voltage
0.3% linearity
Excellent position sensitivity
Improved warm up shift distribution
Parylene coating available on request

Applications
Medical technology
Environmental control
Portable/mobile devices
Heating Ventilation Air Conditioning

Max. Sensor rating
Supply Voltage: 6 Vdc
Common mode pressure: 5 psig
Soldering temperature: (2 - 4 seconds soldering ) 270°C

Environmental Parameters
Operating temperature: -25 to 85°C
Storage: -40 to 125°C
Humidity limit: 0 to 95% RH (non-condensing)

More Less

Product category: Pressure sensors

BLVR Series

The basic BLVR series sensor is based on All Sensors' CoBeam²™ technology. The device provides a high output signal at a low operating voltage, reducing the overall supply voltage while maintaining comparable output levels with conventional equivalent sensor elements. This lower supply voltage results in improved warm-up, while the CoBeam²™ technology itself reduces susceptibility to package stresses, resulting in improved long-term stability. The technology also improves position sensitivity compared to conventional single chips. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. The output is ratiometric to the supply voltage and can operate from 0.9 to 1.8 volts DC.


Features
1 to 30 inH2O
0.9V to 1.8V supply voltage
0.3% linearity
Excellent position sensitivity
Improved warm up shift distribution
Parylene coating available on request

Applications
Medical technology
Environmental control
Portable/mobile devices
Heating Ventilation Air Conditioning

Max. Sensor rating
Supply Voltage: 6 Vdc
Common mode pressure: 5 psig
Soldering temperature: (2 - 4 seconds soldering ) 270°C

Environmental Parameters
Operating temperature: -25 to 85°C
Storage: -40 to 125°C
Humidity limit: 0 to 95% RH (non-condensing)

More Less

Product category: Pressure sensors

MDCX-Serie

The Millivolt Output pressure sensors is based upon a proprietary technology to reduce all output offset or common mode errors. This model provides a calibrated millivolt output with superior output offset characteristics. Output offset errors due to change in temperature, stability to warm-up, stability to long time period, and position sensitivity are all significantly reduced when compared to conventional compensation methods. In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure.

These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like.

The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage up to +16 V is acceptable.


Features
0 to 1” H2O to 0 to 30” H2O Pressure Ranges
Matched pressure port volumes
Temperature Compensated
Calibrated Zero and Span

Applications
Medical Instrumentation
Environmental Controls
HVAC

Pressure Sensor Maximum Ratings
Supply Voltage, Vs
16 Vdc
Common-mode pressure
10 psig
Lead Temperature (soldering 2-4 sec.)
250°C

Environmental Specification
Compensated
0 to 50(70)°C
Operating
-25 to 85°C
Storage
-40 to 125°C
Humidity Limits
0 to 95% RH (non condensing)

More Less

About us

Company portrait

All Sensors, one of the leading manufacturers of low pressure MEMS piezoresistive sensors specializes in product development with a focus on ultra-low pressure sensing for medical and industrial applications. All Sensors products are designed for high accuracy, reliability and reproducibility.


Core competence
Highest accuracy at low pressures, reliable MEMS pressure sensors
__________________________
Development and production of pressure sensors with many years of experience in sensor technology
__________________________
Innovative CoBeam²™ technology and dual die technology
__________________________
Optimized solutions for mobile applications with low power consumption, insensitive to position changes and acceleration
__________________________
Standard solutions based on modular product platforms
__________________________
Customization of products
__________________________
Individual system solutions for optimal integration of measurement technology in demanding applications