Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
TECHNOLOGIE MEDICALE S.A.S.
P.O. Box 46,
93130
Noisy-le-Sec
101, rue Vaillant Couturier, 93130 Noisy-le-Sec
France
101, rue Vaillant Couturier, 93130 Noisy-le-Sec
France
Telephone +33 1 48455895
Fax +33 1 49429021
info@technologiemedicale.com
http://www.technologiemedicale.com
Fax +33 1 49429021
info@technologiemedicale.com
http://www.technologiemedicale.com
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
This company is co-exhibitor of
Business France EPIC
Media files
Contact
Visit us
16.11.2020
Topic
all-day
Presentation of our company and our range of devices
17.11.2020
Topic
all-day
Presentation of our company and our range of devices
18.11.2020
Topic
all-day
Presentation of our company and our range of devices
19.11.2020
Topic
all-day
Presentation of our company and our range of devices
Our range of products
Product categories
- 01 Electromedical equipment / medical technology
- 01.06 Intense medicine / anesthesiology / respiration
- 01.06.02 Respiration equipment, oxygen equipment
Respiration equipment, oxygen equipment
- Flowmeters – RTM3
- 70 LPM RTM3 Oxygen Flowmeter with floating ball for Nasal High Flow (NHF)
- Flowmeters – DEBFLO DEBPLUS
- Flowmeters – DEBSON TM2
- Pressure regulators – REGFLOW TM
- Pressure regulators – REGSON TM2
- Pressure regulators – DETREG TM
- BLENDER TM
- Ambulance panels
- Humidifiers
- TM Flow -Switch & Switch
- TM Blowing unit
- Hosepipes for medical fluids
- Probes & Rail mounting systems
- Other Oxygen-therapy accessories
- Vacuum regulators – RVTM3
- VENTURI TM2 ejectors
- Water manometers – JTM
- Collection jars & suction liners TM
- Suction kits & Trolleys
- Vacuum Hosepipes for medical fluids
- Vacuum Probes & Rail mounting systems
- Other Suction accessories
Our products
Product category: Respiration equipment, oxygen equipment
Flowmeters – RTM3
The RTM3 flowmeter with floating ball is used to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract.
The RTM3 should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system.
It must be fitted at its outlet either with a humidifier/nebulizer or with an outlet tubing nipple.
New 70 LPM RTM3 Oxygen Flowmeter with floating ball for Nasal High Flow (NHF)
Flowmeter with floating ball dedicated to high-flow oxygen therapy, applied as soon as Covid-19 patients are admitted with respiratory failure.
The RTM3 should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system.
It must be fitted at its outlet either with a humidifier/nebulizer or with an outlet tubing nipple.
New 70 LPM RTM3 Oxygen Flowmeter with floating ball for Nasal High Flow (NHF)
Flowmeter with floating ball dedicated to high-flow oxygen therapy, applied as soon as Covid-19 patients are admitted with respiratory failure.
Product category: Respiration equipment, oxygen equipment
70 LPM RTM3 Oxygen Flowmeter with floating ball for Nasal High Flow (NHF)
Flowmeter with floating ball dedicated to high-flow oxygen therapy, applied as soon as Covid-19 patients are admitted with respiratory failure.
Nasal High Flow treatment :
· Prevent intubation
· Facilitate early treatment
· Reduce respiratory muscle atrophy
· Reduce resuscitation services overcrowding
Nasal High Flow treatment :
· Prevent intubation
· Facilitate early treatment
· Reduce respiratory muscle atrophy
· Reduce resuscitation services overcrowding
Product category: Respiration equipment, oxygen equipment
Flowmeters – DEBFLO DEBPLUS
DEBFLO and DEBPLUS are flowmeters with pre-adjuted flowrates used to set the flow of a gas that is to be delivered to patients through the respiratory tract.
They should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system.
They should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system.
Product category: Respiration equipment, oxygen equipment
Flowmeters – DEBSON TM2
The DEBSON 2 flowmeter with pre-adjusted flows is used to set the flow of a gas that is to be delivered to patients through the respiratory tract. It should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system. It must be fitted at its outlet either with a humidifier/nebulizer or with an outlet tubing nipple.
Product category: Respiration equipment, oxygen equipment
Pressure regulators – REGFLOW TM
The REGFLOW TM pressure regulator, connected to an Oxygen or medical Air cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure.
The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Combined with an RTM3 flowmeter with floating ball, the REGFLOW TM pressure regulator enables to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract from a gas cylinder.
Fitted with a quick-release connector it also enables to supply a ventilator or any other medical device with gas. Two connection systems to the gas cylinder are available:
• The bullnose fitting, for large cylinders (> 4 liters in water or 0.8 m3).
• The yoke pin-index fitting, for small cylinders (universal system).
The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Combined with an RTM3 flowmeter with floating ball, the REGFLOW TM pressure regulator enables to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract from a gas cylinder.
Fitted with a quick-release connector it also enables to supply a ventilator or any other medical device with gas. Two connection systems to the gas cylinder are available:
• The bullnose fitting, for large cylinders (> 4 liters in water or 0.8 m3).
• The yoke pin-index fitting, for small cylinders (universal system).
Product category: Respiration equipment, oxygen equipment
Pressure regulators – REGSON TM2
The REGSON TM2 pressure regulator, connected to an Oxygen or medical Air cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure.
The pressure of the compressed gas cylinder can be read on the pressure gauge of the device.
Combined with a DEBSON TM2 flowmeter with pre-adjusted flowrates, the REGSON TM2 pressure regulator enables to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract from a gas cylinder.
Fitted with a quick-release connector it also enables to supply a ventilator or any other medical device with gas.
Two connection systems to the gas cylinder are available:
• The bullnose fitting, for large cylinders (> 4 Litres in water or 0.8 m3).
• The yoke pin-index fitting, for small cylinders (universal system).
The pressure of the compressed gas cylinder can be read on the pressure gauge of the device.
Combined with a DEBSON TM2 flowmeter with pre-adjusted flowrates, the REGSON TM2 pressure regulator enables to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract from a gas cylinder.
Fitted with a quick-release connector it also enables to supply a ventilator or any other medical device with gas.
Two connection systems to the gas cylinder are available:
• The bullnose fitting, for large cylinders (> 4 Litres in water or 0.8 m3).
• The yoke pin-index fitting, for small cylinders (universal system).
Product category: Respiration equipment, oxygen equipment
Pressure regulators – DETREG TM
The DETREG TM pressure regulator, connected to an Oxygen or medical AIR cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure.
The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Only equipped with a quick-release connector, it enables to supply a ventilator or any other medical device with gas.
The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Only equipped with a quick-release connector, it enables to supply a ventilator or any other medical device with gas.
Product category: Respiration equipment, oxygen equipment
BLENDER TM
BLENDER TM is a medical device used to provide a mix of O2 and medical AIR to the patient (FiO2). It is intended to adjust the concentration of Oxygen (from 21 to 100%) in medical AIR. It is provided with two outlets to connect a 5 l/min flowmeter and a 15 l/min or 30 l/min flowmeter. It is connected to sources of pressurised gas on the wall or to pressure regulators’ quick-release connectors using two hosepipes medical AIR and O2.
BLENDER TM is mainly intended for paediatric and neonatalogy low flow applications.
BLENDER TM is mainly intended for paediatric and neonatalogy low flow applications.
Product category: Respiration equipment, oxygen equipment
Humidifiers
The humidifier is used to humidify the Oxygen or the medical AIR delivered to the patient through the respiratory tract. Screwed to the outlet of a flowmeter (either with floating ball or pre-calibrated), it should be filled in with sterile water only.
Product category: Respiration equipment, oxygen equipment
TM Flow -Switch & Switch
The Switch and the Flow-Switch can be screwed at the outlet of every flowmeters. They enable you to direct the gas flow either towards an outlet tubing nipple or a humidifier. The user can choose the requested position without removing the nipple or the humidifier.
Product category: Respiration equipment, oxygen equipment
Hosepipes for medical fluids
The hosepipes are used as extensions and enable to supply devices with medical gases from standardized outlets.
The probes are permanently crimped onto the hose.
Antistatic PVC hose, composed of 4 extra-flexible coats, with reinforcement and high-resistance polyester fiber.
Odour free.
Shiny and smooth aspect for an easy cleaning.
High resistance against bursting and crushing.
The probes are permanently crimped onto the hose.
Antistatic PVC hose, composed of 4 extra-flexible coats, with reinforcement and high-resistance polyester fiber.
Odour free.
Shiny and smooth aspect for an easy cleaning.
High resistance against bursting and crushing.
Product category: Respiration equipment, oxygen equipment
Other Oxygen-therapy accessories
The Y-connector is essential in the treatment of COVID-19 to allow treatment of two patients with a single oxygen wall outlet
For any information concerning our Oxygen-therapy accessories, do not hesitate to contact us.
For any information concerning our Oxygen-therapy accessories, do not hesitate to contact us.
Product category: Respiration equipment, oxygen equipment
Vacuum regulators – RVTM3
The vacuum regulator is used to measure and adjust the vacuum level within the context of medical suction.
It enables to drain substances out of the patient’s body during surgical procedures.
The vacuum regulator should be connected to a vacuum source on the wall either using a direct probe or a rail mounting system. It should be associated with a collection jar and a suction hose.
The vacuum regulator is essential in the treatment of COVID-19 to de-clutter patients from bronchial secretions in order to facilitate their ventilation
It enables to drain substances out of the patient’s body during surgical procedures.
The vacuum regulator should be connected to a vacuum source on the wall either using a direct probe or a rail mounting system. It should be associated with a collection jar and a suction hose.
The vacuum regulator is essential in the treatment of COVID-19 to de-clutter patients from bronchial secretions in order to facilitate their ventilation
Product category: Respiration equipment, oxygen equipment
VENTURI TM2 ejectors
The VENTURI TM2 ejector is used to create, to adjust and to measure a suction from a source of pressured gas on the wall or from a cylinder (oxygen or medical air).
It enables to suck in liquids or mucus in the absence of vacuum pipeline network.
The VENTURI TM2 ejector should be connected either to a source of pressured gas on the wall, using a direct probe or a rail mounting system, or a cylinder through a pressure regulator fitted with a quick-release connector.
The VENTURI TM2 ejector should be associated with a collection jar and a suction hose.
Vacuum regulation is essential in the treatment of COVID-19 to de-clutter patients from bronchial secretions in order to facilitate their ventilation
It enables to suck in liquids or mucus in the absence of vacuum pipeline network.
The VENTURI TM2 ejector should be connected either to a source of pressured gas on the wall, using a direct probe or a rail mounting system, or a cylinder through a pressure regulator fitted with a quick-release connector.
The VENTURI TM2 ejector should be associated with a collection jar and a suction hose.
Vacuum regulation is essential in the treatment of COVID-19 to de-clutter patients from bronchial secretions in order to facilitate their ventilation
Product category: Respiration equipment, oxygen equipment
Water manometers – JTM
The water manometer is used to measure and to adjust a low vacuum level (situated between the atmospheric pressure and 90 mbar). It is mainly used in the context of thoracic or tracheal suction but also in neonatalogy.
The water manometer should be connected to a vacuum source on the wall either using a direct probe or a rail mounting system.
It should be associated with a collection jar and a suction hose.
The water manometer should be connected to a vacuum source on the wall either using a direct probe or a rail mounting system.
It should be associated with a collection jar and a suction hose.
Product category: Respiration equipment, oxygen equipment
Collection jars & suction liners TM
The collection jars and suction liners are used to collect liquids or mucus resulting from medical suction.
They can be used in conjunction with any suction device.
Collection jars
Collection jars made of polysulfone, unbreakable and autoclavable up to 134° C.
Collection jars made of polycarbonate, unbreakable and autoclavable up to 121° C.
Covers fitted with inlet nipples marked PATIENT/VACUUM.
Covers fitted with an anti-overflow safety system.
For 1 L short and 2 L jars: integrated moulded hanger which enables to hang the jar directly onto the rail clamp or onto the wall bracket without using a basket.
Suction liners
Cone-shaped for an easy-positioning inside the jar.
Covers fitted with a safety valve to stop the suction as soon as the liner is full.
They can be used in conjunction with any suction device.
Collection jars
Collection jars made of polysulfone, unbreakable and autoclavable up to 134° C.
Collection jars made of polycarbonate, unbreakable and autoclavable up to 121° C.
Covers fitted with inlet nipples marked PATIENT/VACUUM.
Covers fitted with an anti-overflow safety system.
For 1 L short and 2 L jars: integrated moulded hanger which enables to hang the jar directly onto the rail clamp or onto the wall bracket without using a basket.
Suction liners
Cone-shaped for an easy-positioning inside the jar.
Covers fitted with a safety valve to stop the suction as soon as the liner is full.
Product category: Respiration equipment, oxygen equipment
Suction kits & Trolleys
The suction kits and trolleys enable to group on a mobile holder (either to carry or to push) the various products making up a suction set (suction devices, collection jars, catheter holder …)
Suction kits
Chrome-plated holder to put on the floor or to hang onto a rail thanks to a TM universal rail clamp in polycarbonate.
Dimensions: height 370 mm x width 320 mm x depth 140 mm.
Accessories:
Suction device
Connection to the central vacuum source
Collection jars
Silicone hose
Vacuum stop
Portable suction trolleys
Blue rilsan-coated steel portable holder with 2 feet (at the front) and 2 wheels (at the back).
Dimensions: height 750 mm x width 400 mm x depth 270 mm.
Accessories:
Suction device
Connection to the central vacuum source
Collection jars
Silicone hose
Vacuum stop
Mobile suction trolleys
Chrome-plated mobile holder with a square-shaped column mounted on a 5 branch basis with 5 rotating wheels (including 2 wheels with brakes).
Dimensions: height 1140 mm x width 500 mm x depth 500 mm.
Accessories:
Suction device
Connection to the central vacuum source
Collection jars
Silicone hose
Vacuum stop
Catheter holder
Suction kits
Chrome-plated holder to put on the floor or to hang onto a rail thanks to a TM universal rail clamp in polycarbonate.
Dimensions: height 370 mm x width 320 mm x depth 140 mm.
Accessories:
Suction device
Connection to the central vacuum source
Collection jars
Silicone hose
Vacuum stop
Portable suction trolleys
Blue rilsan-coated steel portable holder with 2 feet (at the front) and 2 wheels (at the back).
Dimensions: height 750 mm x width 400 mm x depth 270 mm.
Accessories:
Suction device
Connection to the central vacuum source
Collection jars
Silicone hose
Vacuum stop
Mobile suction trolleys
Chrome-plated mobile holder with a square-shaped column mounted on a 5 branch basis with 5 rotating wheels (including 2 wheels with brakes).
Dimensions: height 1140 mm x width 500 mm x depth 500 mm.
Accessories:
Suction device
Connection to the central vacuum source
Collection jars
Silicone hose
Vacuum stop
Catheter holder
Product category: Respiration equipment, oxygen equipment
Vacuum Hosepipes for medical fluids
The hosepipes are used as extensions and enable to supply suction devices from standardized vacuum outlets.
The probes are permanently crimped onto the hose.
Reinforced and transparent hose.
Odour free.
Shiny and smooth aspect for an easy cleaning.
High resistance against bursting and crushing.
Supplied in standard with a crimped AFNOR angled remote probe and a crimped AFNOR straight remote probe.
Patented AFNOR remote probes hosepipes
The probes are permanently crimped onto the hose.
Reinforced and transparent hose.
Odour free.
Shiny and smooth aspect for an easy cleaning.
High resistance against bursting and crushing.
Supplied in standard with a crimped AFNOR angled remote probe and a crimped AFNOR straight remote probe.
Patented AFNOR remote probes hosepipes
About us
Company details
TECHNOLOGIE MEDICALE has been developing a wide range of medical devices for oxygen therapy, suction, and medical rails and accessories for almost 40 years.
Because we design and manufacture our medical devices in-house, we can tweak the technology, ergonomics and aesthetics of our products on an ongoing basis, to ensure they are reliable, easy to use and easy to maintain as possible, all while meeting healthcare industry standards and requirements.
Our medical devices are made in France, so we have total control over the quality of our products. This is a strategic choice which enables us to adapt and respond to our customers’ needs quickly.
TECHNOLOGIE MEDICALE’s products are highly reputed in France and in more than 100 countries around the world. We work with a large network of independent distributors, and more than 65% of our turnover comes from exports.
Because we design and manufacture our medical devices in-house, we can tweak the technology, ergonomics and aesthetics of our products on an ongoing basis, to ensure they are reliable, easy to use and easy to maintain as possible, all while meeting healthcare industry standards and requirements.
Our medical devices are made in France, so we have total control over the quality of our products. This is a strategic choice which enables us to adapt and respond to our customers’ needs quickly.
TECHNOLOGIE MEDICALE’s products are highly reputed in France and in more than 100 countries around the world. We work with a large network of independent distributors, and more than 65% of our turnover comes from exports.