Zhejiang Runqiang Medical Instruments Co., Ltd. of Jiaxing, Zhejiang at MEDICA 2020 in Düsseldorf -- MEDICA - World Forum for Medicine
Manage stand orders
Select Option

Zhejiang Runqiang Medical Instruments Co., Ltd.

No.618 Dade Rd, Xiuzhou District,, 314031 Jiaxing, Zhejiang
China
Telephone +86 573 82765625
Fax +86 573 82280798
xinquan.du@zjrunqiang.com

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Media files

Contact

Linda Xu

Sales Manager

Phone
+8613588808548

Email
linda.xu@zjfert.com

Jerry Du

Sales Manager

Phone
+8613819379615

Email
xinquan.du@zjrunqiang.com

Betty Le

Sales Manager

Phone
+8618057315175

Email
le.dan@zjrunqiang.com

Our products

Product category: Anesthesiology equipment, anesthesiology systems

NRFit epidural flat filter and caps

It producted according to the new ISO80369-6 standard,small bore connectors for liquids and gases in healthcare applications-part 6: connectors for neuraxial applications.

I am proud to show you the NRFit epidural flat filter and caps. The key feature of this device is that it complies the ISO 80369-6, the small-bore connector, it is yellow colour design.

The device is to be used in connection with ISO 80369-6 NRFit device only.  There is a membrance inside which the filtering should more than 90% to filter the particles more than 0.2um. and the upper and down cover both made from MABS medical degree material.

There are two caps available, male cap and female cap which also iso80369-6 connector to seal the filter.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

NRFit epidural kit and combined spinal & epidural kit

 All devices are produced according to the new ISO80369-6 standard,small bore connectors for liquids and gases in healthcare applications-part 6: connectors for neuraxial applications.

We are the FIRST and ONLY factory to product this new device, the NRFit epidural kit and combined spinal & epidural kit. This product is 100% design,development and production in our in house manufacturing site. The device is to be used in conjunction with ISO 80369-6 NRFit device only, no misconnection. 

The NRFit epidural kit is used for the epidural block and anaesthesia to human body for puncture and injection in clinic.

The NRFit combined spinal epidural kit is used for the epidural block and subarachnoid cavity anaesthesia to human body for puncture and injection in clinic.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

NRFit drawing up filter needle and straw

NRFit drawing up filter needle and straw is producted according to the new ISO80369-6 standard, small bore connectors for liquids and gases in healthcare applications-part 6: connectors for neuraxial applications.

The device is to be used in conjunction with ISO 80369-6 NRFit device only, no misconnection. This device is intended to be used with ISO80369-6 NRFit neuraxial syringes for the drawing up of neuraxial medication and anesthetic.

The NRFit drawing up filter needle common size is 18G and the common length is 38mm or 50mm. The angle of the needle tip should be 45 degree, the tolerance is +-5 degree. And the needle hub and connector both made from MABS medical degree material.

The NRFit drawing up filter straw’s hub and connector are the same material as above and the tube is DEHP FREE which the length is 10cm used during the clinic.

They are both have a membrance inside which the filtering rate should more than 90% to filter the particles more than 5um.

Our products is with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

NRFit epidural flat filter and caps

 NRFit epidural flat filter and caps produced according to the new ISO80369-6 standard,small bore connectors for liquids and gases in healthcare applications-part 6: connectors for neuraxial applications.

The device is to be used in conjuction with ISO 80369-6 NRFit device only, no misconnection. This device is intended for connection to iso 80369-6 NRFit patient circuits.

The tube is PVC material but DEHP free, the common length is 10cm, 20cm, 100cm or others. The two connectors at two ends is MABS material which the medical degree.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

NRFit spinal needle

NRFit spinal needle producted according to the new ISO80369-6 standard,small bore connectors for liquids and gases in healthcare applications-part 6: connectors for neuraxial applications.

We are the FIRST and ONLY factory to product this new item, the NRFit spinal needle. This product is 100% design,development and production in our in house manufacturing site.

The device is to be used in conjuction with ISO 80369-6 NRFit device only, no misconnection. It is a product of regional anaesthesia, it is used to puncture and inject the anaesthesia medicine into the spine before operation.

The needle grinding machine is from Japan and the SUS304 needle tube and steel stylet material are from Korea. Beside the needle tube and steel stylet, it also has 2 parts, needle sheath and plastic Hub. It has a clear vision of the PC material hub, so we can see the liquid very clearly. Different guages the cap of the spinal needle has different colours, the normal standard length is 9cm, and it is available from 18G-27G.

if you have special requirement of length, we also welcome customized.  it is packed by paper pouch, Eto sterilization, 50pcs/box, 1000pcs/carton.  

it is sharp, good puncture feel, high quality control.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

Disposable Medical Filters

We have lot of medical filters, IV filters, epidural filter, transducer protector, Medicine filter, air filters. Which is for different application.

This product is 100% produced in our in house clean room manufacturing site, the IV filter is 5 micron, it is a components of IV set, the main customers are manufacturers of IV set, with or without air vent is available, the transducer protector is for dialysis, the intend use is to prevent from the blood away from the dialysis machine, it is Hydrophobic, the pore size is 0.2 micron, with luer connector, ABS housing, clear and easy to see the working situation inside, PTFE membrane has good performance of hold the liquid go through, we have 5 automatic assembly machine for the Transducer protector and the production capacity is very big number. The epidural filter is flat and with 0.2 micron, with luer connection and also the NRFIT connection.

Regarding the packing, we have blister and in bulk two ways according to the requirement of the customers, high quality control, best service to customers, we have already exported to more than 30 countries.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved. Patients are using our products every day in the world.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

Needleless airtight infusion connector protector

Compare with the common disinfection,Needleless airtight infusion connector protector is easy to use during the clinic.

It is used in needless connectors, Dialysis connectors, IV connectors and all luer connectors.

Needleless airtight infusion connector protector is with PP material, inside is the sponge with 70% IPA, it is designed to kill the bacteria and avoid cross-infection and stay clean and keep safe for the patients.

Not only easy to handle but also secure during the clinic and very popular in the hospitals. Put on in 1 min,protect port for up to 7 days if not removed, could kill the more than 99% bacteria in 3 mins.

Needleless airtight infusion connector protector is packed in stripe and Gamma sterile. Also our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

Combined spinal and epidural kit

Combined spinal and epidural kit are a product of regional anaesthesia, it is used to puncture and inject the anaesthesia medicine into the epidural space and spine space.

This product is 100% produced in our in-house manufacturing site, it has 5 components, epidural needle, spinal needle, epidural catheter, flat filter, LOR syringe, catheter adapter and wound sticker. The most popular size is 16G and 18G,we can also make 15G and 17G. the spinal needle is pencil point , 11cm long,  the epidural catheter is 900mm long, it is nylon material, with 1cm marking on the tubing body, the catheter tip has 3 lateral holes with different directions, so it can spray fully in the epidural space, we also have reinforced epidural catheter optional for the customers. The reinforced catheter has 2 holes, the advantage is anti-bend and more flexible. The flat filter is 0.2 micron, and with PES membrane, ABS housing, it is clear and beautiful design and with 99.99% filter efficiency during filtering. The catheter adapter is screw type and easy to fix the catheter, the LOR syringe we have 7ml and 10ml two types, very low resistance , very convenient for the doctors to detect the epidural space,  it is packed by two trays, the inside tray is to protect the products, the outer tray is to protect the products from contamination after opening during the preparation of operation room. It is Eto sterilization, 10pcs/box, 120pcs/carton.  it is high level product, easy to handle, good quality control, we have already exported to more than 30 countries.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

Disposable heat and moisture exchange filter

Disposable heat and moisture exchange filter is used with the breathing machine and anaesthesia machine with an assistant of the circuits, it protect the patient of the air way of humidify the dry air, a very important and must product in ICU.

This product is 100% produced in our in house clean room manufacturing site, we have four types, HME filter adult type, HME filter child type, HME filter bend type and Bacteria and viral filter, we have green colour and transparent colour, the filter efficiency is 99.999%, the housing is ABS, which is clear and shining appearance, the filter membrane is high quality import membrane, if you want more data of this product, please feel free to contact us. Regarding the packing, we have tray blister and paper pouch two ways, Eto sterilization, 10pcs/box, 100pcs/carton., high quality control, best service to customers, we have already exported to more than 30 countries.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

Spinal Needle

 The spinal needle, also called lumbar puncture needle, it is a product of regional anaesthesia, it is used to puncture and inject the anaesthesia medicine into the spine before operation.

This product is 100% produced in our in-house manufacturing site, it has 4 parts, needle tubing, needle sheath, Plastic Hub, steel stylet, also the introducer needle is optional. It has a clear vision of the hub so we can see the liquid very clearly, the tubing is made from 304 stainless steel, the Hub is made from K resin and with luer connector, The size from 22G-27G is available of the introducer, different gauges the cap of the spinal needle has different colours,  the normal standard length is 9cm, and it is available from 18G-27G. if you have special requirement of length, we also welcome customized.  it is packed by paper pouch, Eto sterilization, 50pcs/box, 1000pcs/carton.  it is sharp, good puncture feel, high quality control, we have already exported to more than 30 countries.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

Disposable infusion pump-soft case

 Disposable infusion pump is one of our key products, which is intended for infusing antibiotic fluids and chemotherapy drugs into a patient in a controlled manner at hospital, alternate care, ambulatory, and home.

Our elastomeric pump family has bottle pump and soft pump.  Soft pumps are available in:

Model: 

1.Continue + PCA

Based on continue pump, add a PCA device. Which offers continue lasting flow, driven by silicone elastomeric power. With constant flow, PCA offer extra 0.5ml drug treatment, it widely used for clinical pain management, and accepted by patients.

2. Continue pump

Continue pump offers continue lasting flow, driven by silicone elastomeric power, widely used for clinical pain management.

3.Multi-rate (4 rates). Multi-rates (8rates)  

Multi-rates pumps offer multiple flow rate choices for patients, different flow satisfy different drug and treatment purpose.

4.Multi-rate (4 rates). Multi-rates (8rates) with PCA

Multi-rates pumps offer multiple flow rate choices for patients, different flow satisfy different drug and treatment purpose. And base on fixed flow rate, PCA offers extra 0.5ml drug for instant treatment.

Sizes: 50-60ml, 100ml, 150ml-200ml, 250-300ml, 400ml

Flow rates can be customized, but most popular sizes are 2ml/hr, 5ml/hr, 8ml/hr, 10ml/hr, 100ml/hr, 200ml/hr

PCA bolos capacity: 0.5ml/shot, filling time 15mins

Efficient infusion volume ﹥90%

We can produce our pump in varies material: PVC, PVC DEHP Free

Our products are with CE 0123 and ISO 13485 approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

Disposable infusion pump-hard case

Disposable infusion pump is one of our key products, which is intended for infusing antibiotic fluids and chemotherapy drugs into a patient in a controlled manner at hospital, alternate care, ambulatory, and home.

Our elastomeric pump family has bottle pump and soft pump.  Bottle pumps are available in:

Model: 

1.Continue pump

Continue pump offers continue lasting flow, driven by silicone elastomeric power, widely used for clinical pain management.

2. Continue + PCA

Based on continue pump, add a PCA device. Which offers continue lasting flow, driven by silicone elastomeric power. With constant flow, PCA offer extra 0.5ml drug treatment, it widely used for clinical pain management, and accepted by patients.

3. Multi-rate (4 rates). Multi-rates (8rates)  

Multi-rates pumps offer multiple flow rate choices for patients, different flow satisfy different drug and treatment purpose.

4. Multi-rate (4 rates). Multi-rates (8rates) with PCA

Multi-rates pumps offer multiple flow rate choices for patients, different flow satisfy different drug and treatment purpose. And base on fixed flow rate, PCA offers extra 0.5ml drug for instant treatment.

Sizes: 50-60ml, 100ml, 150ml-200ml, 250-300ml

Flow rates can be customized, but most popular sizes are 2ml/hr, 5ml/hr, 8ml/hr, 10ml/hr…

PCA bolos capacity: 0.5ml/shot, filling time 15mins

Efficient infusion volume ﹥90%

We can produce our pump in varies material: PVC, PVC DEHP Free, PVC Free, and UV material as well.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

Single-use Epidural kit

Single-use Epidural kit is a product of regional anaesthesia, it is used to puncture and inject the anaesthesia medicine into the epidural space.

This product is 100% produced in our in-house manufacturing site, it has 5 components, epidural needle, epidural catheter, flat filter, LOR syringe, catheter adapter and wound sticker. The most popular size is 16G and 18G, we can also make 15G and 17G. the epidural catheter is 900mm long, it is nylon material, with 1cm marking on the tubing body, the catheter tip has 3 lateral holes with different directions, so it can spray fully in the epidural space, we also have reinforced epidural catheter optional for the customers. The reinforced catheter has 2 holes, the advantage is anti-bend and more flexible. The flat filter is 0.2 micron, and with PES membrane, ABS housing, it is clear and beautiful design and with 99.99% filter efficiency during filtering. The catheter adapter is screw type and easy to fix the catheter, the LOR syringe we have 7ml and 10ml two types, very low resistance , very convenient for the doctors to detect the epidural space,  it is packed by two trays, the inside tray is to protect the products, the outer tray is to protect the products from contamination after opening during the preparation of operation room. It is Eto sterilization, 10pcs/box, 120pcs/carton.  it is high level product, easy to handle, good quality control, we have already exported to more than 30 countries.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

Product category: Anesthesiology equipment, anesthesiology systems

Epidural Needle

The epidural needle, also called touchy needle, it is a product of regional anaesthesia, it is used to puncture and inject the anaesthesia medicine into the epidural space with the assistance of epidural catheter and syringe before operation.

This product is 100% produced in our in-house manufacturing site, it has 4 parts, needle tubing, needle sheath, Plastic Hub, steel stylet, the stylet we have plastic stylet and steel stylet available. It has a clear vision of the hub so we can see the liquid very clearly, the tubing is made from 304 stainless steel, with 1cm marking, the Hub is made from K resin, and with luer connector, and it is available from 15G-18G , different Guages the cap of the needle has different colours,  the normal standard length is 8cm and 9cm. it is packed by paper pouch, Eto sterilization, 50pcs/box, 1000pcs/carton.  it is bend tip, good puncture feels, high quality control, we have already exported to more than 30 countries.

Our products are with CE 0123 and ISO 13485 approved, also the China FDA approved.

More Less

About us

Company details

ZHE JIANG RUNQIANG MEDICAL INSTRUMENTS CO.,LTD. located in Jiaxing of Zhejiang Province, at joint of river, sea, lake. It is within 100km to Shanghai, Hangzhou, Suzhou and Ningbo. And there is Shanghai-Hangzhou, Suzhou-Hangzhou lines nearby or across.

ZHE JIANG RUNQIANG MEDICAL INSTRUMENTS CO.,LTD. a wholly-owned subsidiary of Zhejiang Fert Medical Device Co., Ltd. It was founded in 2005 with register capital of RMB 56 million Yuan. It covers 20586㎡. Class 100,000 clean room covers about 12000㎡. It is a state high-tech enterprise engaged in production and operation of single-use high-end transfusion and anesthesia products.

Our quality policy is “people first, technology innovation, keep improving”. We regard quality, innovation and service as primary. And we implement internal quality evaluation and training practice periodically. We have gained ISO9001 and ISO13485 quality system authentication. Our company passes GMP and CE assessment.

There is self-owned research and development center, non-standard automatic production equipment and professional expert team. Main business covers medical apparatus research, product marketing, technology consulting, technology transfer and related service.

Runqiang Medical expects to cooperate with all colleagues. We would like to develop together with all friends and make contribution to medical and health service industry.

More Less

Company data

Number of employees

500-999

Area of business

Commodities and Consumer Good for Surgeries and Hospitals

Company information as a PDF file