Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Contec Medical Systems Co., Ltd.
112 Qinhuang West Street E&T Zone,
066004
Qinhuangdao, Hebei
China
China
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Contact
Robin Li
Regional Manager of Europe
Belinda Bao
Regional Manager of Europe
Sophe Wang
Regional Manager of Europe
Barney Li
Regional Manager of America
Sam Qi
Vice manager & Regional Manager of India
Hebe Kan
Regional Manager of America
Grant He
Regional Manager of America
Tony Cao
Regional Manager of Latin America and South America
Jack Woo
Regional Manager of Africa
Kathy Zhao
Regional Manager of Mid-East
Vivian Lee
Regional Manager of East Asia
Nadia Guo
Regional Manager for Southeast Asia
Shadow Zhang
Product Manager
Arthas Dong
B2B Sales Manager
Clarence Wei
Department Mananger
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 01 Electromedical equipment / medical technology
- 01.01 Diagnostics
- 01.01.08 Devices for measuring body temperature / thermometer
Devices for measuring body temperature / thermometer
- 01 Electromedical equipment / medical technology
- 01.01 Diagnostics
- 01.01.11 Blood pressure monitoring equipment
Blood pressure monitoring equipment
- 01 Electromedical equipment / medical technology
- 01.02 Imaging supplies
- 01.02.04 Ultrasound diagnostic equipment
Ultrasound diagnostic equipment
- 01 Electromedical equipment / medical technology
- 01.03 Surgery devices, endoscopy devices
- 01.03.05 Instruments and apparatus for cardiac and thoracic surgery
Instruments and apparatus for cardiac and thoracic surgery
- TS1 Patient Monitor
- TS13 Patient Monitor
- E3 NEW ELECTROCARDIOGRAPH
- E3M NEWELECTROCARDIOGRAPH
- E6 NEW ELECTROCARDIOGRAPH
- E12 NEW ELECTROCARDIOGRAPH
- CMS1700A Color Doppler Ultrasonic Diagnostic System
- CMS1700C Color Doppler Ultrasonic Diagnostic System
- CMS5100 Patient Monitor
- CMS6000 Patient Monitor
- CMS8000 Patient Monitor
- CMS9200 Patient Monitor
- PM10 Portable ECG Monitor
- OC5B(Nebulization function) Oxygen Concentrator
- MS400 Multiparameter Simulator
- Electrocardiograph ECG300G
- Electrocardiograph ECG90A
- Electrocardiograph ECG100G
- Electrocardiograph ECG600G
- Electrocardiograph ECG300GA
- Electrocardiograph ECG300GT
- Electrocardiograph ECG1212G
- Dynamic ECG Systems TLC5000
- Dynamic ECG Systems TLC9803
- Dynamic ECG Systems TLC6000
- ECG Workstation CONTEC8000G/GW
- VET ELECTROCARDIOGRAPH ECG300G-VET
- ELECTROCARDIOGRAPH ECG1200G
- 01 Electromedical equipment / medical technology
- 01.06 Intense medicine / anesthesiology / respiration
- 01.06.02 Respiration equipment, oxygen equipment
Respiration equipment, oxygen equipment
- 01 Electromedical equipment / medical technology
- 01.06 Intense medicine / anesthesiology / respiration
- 01.06.03 Patient monitoring systems
Patient monitoring systems
- 01 Electromedical equipment / medical technology
- 01.06 Intense medicine / anesthesiology / respiration
- 01.06.04 Inhaler and aerosol appliances
Inhaler and aerosol appliances
- 01 Electromedical equipment / medical technology
- 01.06 Intense medicine / anesthesiology / respiration
- 01.06.06 Infusion technology equipment
Infusion technology equipment
- 02 Laboratory technology
- 02.01 Analyser systems / equipment
Analyser systems / equipment
- 06 Information and communication technology
- 06.03 Wearable technologies, smart textiles
Wearable technologies, smart textiles
- 06 Information and communication technology
- 06.04 eHealth, telemedicine / telematics / telemetry
eHealth, telemedicine / telematics / telemetry
- 06 Information and communication technology
- 06.06 Medical information systems / software
- 06.06.04 Medical Apps and App Stores
Medical Apps and App Stores
Our products
Product category: Instruments and apparatus for cardiac and thoracic surgery
TS1 Patient Monitor
Introduction
Standard parameters: ECG (3-lead / 5-lead), RESP, NIBP, SpO2, PR, TEMP Optional parameters: dual-channel IBP, 12-lead ECG
1)5" high-definition LCD, multi - channel waveform display.
2)Touch screen design, automatic lock screen function prevents misoperation; shortcut buttons design, convenient to operate.
3)Portable design (weight < 1.0 kg), flexible to transport.
4)Multi - interface selection, convenient to observe patient’s data trend.
5)Patient information can be rapidly entered, patient type (adult / neonate / pediatric) can be quickly switched, meets the requirements of different departments.
6)With automatic import function (between patient data and similar monitors), ensures uninterrupted monitoring.
7)Low power consumption design, built-in large-capacity battery, meets the requirements of long-term operation.
8)Fanless design, achieves no noise and low power consumption during working.
9)Degree of protection provided by enclosure complies with IEC/EN 60529, waterproof degree: IP44
10)Connect to Central Monitoring System developed by our company by WiFi, convenient for centralized observation of patient’s vital signs.
Standard parameters: ECG (3-lead / 5-lead), RESP, NIBP, SpO2, PR, TEMP Optional parameters: dual-channel IBP, 12-lead ECG
1)5" high-definition LCD, multi - channel waveform display.
2)Touch screen design, automatic lock screen function prevents misoperation; shortcut buttons design, convenient to operate.
3)Portable design (weight < 1.0 kg), flexible to transport.
4)Multi - interface selection, convenient to observe patient’s data trend.
5)Patient information can be rapidly entered, patient type (adult / neonate / pediatric) can be quickly switched, meets the requirements of different departments.
6)With automatic import function (between patient data and similar monitors), ensures uninterrupted monitoring.
7)Low power consumption design, built-in large-capacity battery, meets the requirements of long-term operation.
8)Fanless design, achieves no noise and low power consumption during working.
9)Degree of protection provided by enclosure complies with IEC/EN 60529, waterproof degree: IP44
10)Connect to Central Monitoring System developed by our company by WiFi, convenient for centralized observation of patient’s vital signs.
Product category: Instruments and apparatus for cardiac and thoracic surgery
TS13 Patient Monitor
Introduction
Standard parameters: ECG (3-lead / 5-lead), RESP, NIBP, SpO2, PR, TEMP Optional parameters: IBP * 4, EtCO2, 12-lead ECG, NELLCOR SpO2, MASIMO SpO2
1)13.3" high-definition touch screen design, easy to operate, elegant in appearance.
2)Independent physiological and technical alarm function, convenient for medical staff to quickly know patient’s condition.
3)Luminous “ON / OFF” button design, easy to operate at night.
4)Modular design: the modules can be configured and combined flexibly and conveniently, expanded and upgraded at any time, meets the monitoring requirements of different departments on different parameters.
5)Support dynamic hot-plugging parameter module: no need to restart the device, plug-and-play, change the monitoring parameters at any time as clinical requirements.
6)Adopt high-performance processor, stable, reliable and fast to process information.
7)Patient information can be rapidly entered, patient type (adult / neonate / pediatric) can be quickly switched, meets the requirements of different departments.
8)Abundant analysis functions: 23 arrhythmia, full-lead ST-segment and pacing analysis; multiple calculation functions (such as calculation of drug concentration, titration table, hemodynamics, ventilation, oxygenation, renal function, etc.).
9)With the functions of waveform freezing, holographic waveform storage and review.
10)Automatic data storage in case of power failure; optional built-in memory card, achieves large-capacity data storage.
11)With HDMI expansion interface, the display screen can be connected according to clinical requirements.
12)Built-in large-capacity detachable lithium battery, ensures uninterrupted monitoring.
13)Fanless design, ensures no noise and low power consumption during working.
14)3-channel built-in recorder used to print real-time waveform is optional.
15)Connect to Central Monitoring System developed by our company by WiFi / Wired, convenient to transmit patient’s real-time data.
Standard parameters: ECG (3-lead / 5-lead), RESP, NIBP, SpO2, PR, TEMP Optional parameters: IBP * 4, EtCO2, 12-lead ECG, NELLCOR SpO2, MASIMO SpO2
1)13.3" high-definition touch screen design, easy to operate, elegant in appearance.
2)Independent physiological and technical alarm function, convenient for medical staff to quickly know patient’s condition.
3)Luminous “ON / OFF” button design, easy to operate at night.
4)Modular design: the modules can be configured and combined flexibly and conveniently, expanded and upgraded at any time, meets the monitoring requirements of different departments on different parameters.
5)Support dynamic hot-plugging parameter module: no need to restart the device, plug-and-play, change the monitoring parameters at any time as clinical requirements.
6)Adopt high-performance processor, stable, reliable and fast to process information.
7)Patient information can be rapidly entered, patient type (adult / neonate / pediatric) can be quickly switched, meets the requirements of different departments.
8)Abundant analysis functions: 23 arrhythmia, full-lead ST-segment and pacing analysis; multiple calculation functions (such as calculation of drug concentration, titration table, hemodynamics, ventilation, oxygenation, renal function, etc.).
9)With the functions of waveform freezing, holographic waveform storage and review.
10)Automatic data storage in case of power failure; optional built-in memory card, achieves large-capacity data storage.
11)With HDMI expansion interface, the display screen can be connected according to clinical requirements.
12)Built-in large-capacity detachable lithium battery, ensures uninterrupted monitoring.
13)Fanless design, ensures no noise and low power consumption during working.
14)3-channel built-in recorder used to print real-time waveform is optional.
15)Connect to Central Monitoring System developed by our company by WiFi / Wired, convenient to transmit patient’s real-time data.
Product category: Instruments and apparatus for cardiac and thoracic surgery
E3 NEW ELECTROCARDIOGRAPH
E3 MODEL is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting any rhythm lead, case database management.
Product category: Instruments and apparatus for cardiac and thoracic surgery
E3M NEWELECTROCARDIOGRAPH
E3M is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting any rhythm lead, case database management.
Product category: Instruments and apparatus for cardiac and thoracic surgery
E6 NEW ELECTROCARDIOGRAPH
E6 is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting any rhythm lead, case database management.
Product category: Instruments and apparatus for cardiac and thoracic surgery
E12 NEW ELECTROCARDIOGRAPH
E12 is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting any rhythm lead, case database management.
Product category: Instruments and apparatus for cardiac and thoracic surgery
CMS1700A Color Doppler Ultrasonic Diagnostic System
2 Brief Introduction
2.1 Introduction
CMS1700A is a color Doppler ultrasonic diagnostic device with high resolution, which has a powerful computer processing platform. The system is mainly suitable for the diagnosis of abdomen, heart, peripheral vessels, breast, obstetrics and gynecology, small organs, urology, muscle, incretion and pediatrics, etc. It adopts Doppler ultrasound imaging technology, advanced image processing technology (such as digital beam-forming technology, tissue harmonic imaging (THI), image speckle suppression, etc.) and digital integrated graphic management system, and the internal professional measurement software package can fully meet the clinic diagnostic requirement.
2.2 Features
1) Color Doppler (CF), color power Doppler imaging (PDI).
2) Pulse spectrum Doppler (PW).
3) B+CF Color double-frame real-time imaging.
4) Linear array deflection/trapezoid imaging, contrast imaging.
5) Anatomic M-mode imaging.
6) space compounding imaging
7) Tissue harmonic imaging (THI).
8) space compounding imaging
9) Puncture enhanced.
2.3 Performance
1) Display depth: ≥ 300 mm
2) Sync implementation of three modes (B+CFM/PDI+PWD).
3) Extended interface: VIDEO interface, S-VIDEO interface, RJ-45 interface, USB interface, VGA interface.
Safety
u Type of protection against electric shock: class Ⅰ equipment
Degree of protection against electric shock: type B applied part
u Operating voltage: AC 100 V~240 V
u Operating frequency: 50 Hz/60 Hz
u Power consumption: ≤ 100 VA
2.4 Accessories
u One abdominal probe (3.5 MHz)
u One linear probe (7.5 MHz)
u One User Manual
u One power cord
u One adapter
2.5 Physical characteristic
Dimension: 370 mm (L) × 360 mm (W) × 80 mm (H)
Weight: 5.5 kg
2.6 Optional configuration
No.
Accessory name
Purpose
1
Convex probe
Be mainly used for:
1) examination of abdominal tissues (including: liver, gallbladder, spleen, pancreas, kidney, uterus, bladder, prostate, etc.);
2) assessment of fetal growth and fetal maturity in obstetric diagnosis.
2
Microconvex probe
Be mainly used for examination of heart and abdominal tissues.
3
Transrectal probe
Be mainly used for examination of rectum.
4
endo-vaginale probe
Be mainly used for gynecological examination.
5
Linear Probe
Be mainly used for neonate, musculoskeletal system, peripheral vessels, small organs (breast, thyroid, testis, etc.).
2.7 Certification
No
3 Selling points analysis
1) Contain rich software packages, which can fully meet the requirements of clinical diagnosis.
2) Anatomic M-mode imaging.
3) Sync implementation of three modes (B+CFM/PDI+PWD).
4) Puncture enhanced technology.
2.1 Introduction
CMS1700A is a color Doppler ultrasonic diagnostic device with high resolution, which has a powerful computer processing platform. The system is mainly suitable for the diagnosis of abdomen, heart, peripheral vessels, breast, obstetrics and gynecology, small organs, urology, muscle, incretion and pediatrics, etc. It adopts Doppler ultrasound imaging technology, advanced image processing technology (such as digital beam-forming technology, tissue harmonic imaging (THI), image speckle suppression, etc.) and digital integrated graphic management system, and the internal professional measurement software package can fully meet the clinic diagnostic requirement.
2.2 Features
1) Color Doppler (CF), color power Doppler imaging (PDI).
2) Pulse spectrum Doppler (PW).
3) B+CF Color double-frame real-time imaging.
4) Linear array deflection/trapezoid imaging, contrast imaging.
5) Anatomic M-mode imaging.
6) space compounding imaging
7) Tissue harmonic imaging (THI).
8) space compounding imaging
9) Puncture enhanced.
2.3 Performance
1) Display depth: ≥ 300 mm
2) Sync implementation of three modes (B+CFM/PDI+PWD).
3) Extended interface: VIDEO interface, S-VIDEO interface, RJ-45 interface, USB interface, VGA interface.
Safety
u Type of protection against electric shock: class Ⅰ equipment
Degree of protection against electric shock: type B applied part
u Operating voltage: AC 100 V~240 V
u Operating frequency: 50 Hz/60 Hz
u Power consumption: ≤ 100 VA
2.4 Accessories
u One abdominal probe (3.5 MHz)
u One linear probe (7.5 MHz)
u One User Manual
u One power cord
u One adapter
2.5 Physical characteristic
Dimension: 370 mm (L) × 360 mm (W) × 80 mm (H)
Weight: 5.5 kg
2.6 Optional configuration
No.
Accessory name
Purpose
1
Convex probe
Be mainly used for:
1) examination of abdominal tissues (including: liver, gallbladder, spleen, pancreas, kidney, uterus, bladder, prostate, etc.);
2) assessment of fetal growth and fetal maturity in obstetric diagnosis.
2
Microconvex probe
Be mainly used for examination of heart and abdominal tissues.
3
Transrectal probe
Be mainly used for examination of rectum.
4
endo-vaginale probe
Be mainly used for gynecological examination.
5
Linear Probe
Be mainly used for neonate, musculoskeletal system, peripheral vessels, small organs (breast, thyroid, testis, etc.).
2.7 Certification
No
3 Selling points analysis
1) Contain rich software packages, which can fully meet the requirements of clinical diagnosis.
2) Anatomic M-mode imaging.
3) Sync implementation of three modes (B+CFM/PDI+PWD).
4) Puncture enhanced technology.
Product category: Instruments and apparatus for cardiac and thoracic surgery
CMS1700C Color Doppler Ultrasonic Diagnostic System
1. Brief Introduction
2.1 Introduction
CMS1700C is a color Doppler ultrasonic diagnostic device with high resolution, which has a powerful computer processing platform.
The system is mainly suitable for the diagnosis of abdomen, heart, peripheral vessels, breast, obstetrics and gynecology, small organs,
urology, muscle, incretion and pediatrics, etc.
It adopts Doppler ultrasound imaging technology, advanced image processing technology (such as digital beamforming technology,
tissue harmonic imaging (THI), image speckle suppression, etc.) and digital integrated graphic management system,
and the internal professional measurement software package can fully meet the clinic diagnostic requirement.
2.2 Features
1) Color Doppler (CF), color power Doppler imaging (PDI).
2) Pulse spectrum Doppler (PW),
3) Continuous wave Doppler (CW).
4) Superior in phased array cardiac imaging technology, complete in software package of cardiac measurement function.
5) B+CF Color double-frame real-time imaging.
6) 3D, 4D imaging.
7) Convex array extended imaging.
8) Linear array deflection, trapezoid imaging.
9) Anatomic M-mode imaging.
10) space compounding imaging
11) Tissue harmonic imaging (THI).
12) Contrast agent imaging.
13) Wide scene imaging.
14) Puncture enhanced.
2.3 Performance
1) Display depth: ≥ 300 mm
2) Sync implementation of three modes (B+CFM/PDI+PWD).
3) Extended interface: VIDEO interface, S-VIDEO interface, RJ-45 interface, USB interface, VGA interface.
Safety
u Type of protection against electric shock: class Ⅰ equipment
Degree of protection against electric shock: type B applied part
u Operating voltage: AC 100 V~240 V
u Operating frequency: 50 Hz/60 Hz
u Power consumption: ≤ 100 VA
2.4 Accessories
u One abdominal probe (3.5 MHz)
u One linear probe (7.5 MHz)
u One User Manual
u One power cord
u One adapter
2.5 Physical characteristic
Dimension: 370 mm (L) × 360 mm (W) × 80 mm (H)
Weight: 5.5 kg
2.6 Optional configuration
No.
Accessory name
Purpose
1
Convex probe
Be mainly used for:
1) examination of abdominal tissues (including: liver, gallbladder, spleen, pancreas, kidney, uterus, bladder, prostate, etc.);
2) assessment of fetal growth and fetal maturity in obstetric diagnosis.
2
Microconvex probe
Be mainly used for examination of heart and abdominal tissues.
3
Transrectal probe
Be mainly used for examination of rectum.
4
endo-vaginale probe
Be mainly used for gynecological examination.
5
Linear Probe
Be mainly used for neonate, musculoskeletal system, peripheral vessels, small organs (breast, thyroid, testis, etc.).
6
Phased array probe
Be mainly used for examination of heart and abdominal tissues.
7
Volume probe
Three-dimensional real-time scanning, examination and diagnosis of fetus, abdominal tissues and uterus, etc. Assessment of fetal growth and fetal maturity in obstetric diagnosis.
2.7 Certification
No
3 Selling points analysis
1) Contain rich software packages, which can fully meet the requirements of clinical diagnosis.
2) Anatomic M-mode imaging, contrast imaging.
3) Superior in phased array cardiac imaging technology, complete in software package of cardiac measurement function.
4) Sync implementation of three modes (B+CFM/PDI+PWD).
5) 3D, 4D imaging.
6) Puncture enhanced technology.
2.1 Introduction
CMS1700C is a color Doppler ultrasonic diagnostic device with high resolution, which has a powerful computer processing platform.
The system is mainly suitable for the diagnosis of abdomen, heart, peripheral vessels, breast, obstetrics and gynecology, small organs,
urology, muscle, incretion and pediatrics, etc.
It adopts Doppler ultrasound imaging technology, advanced image processing technology (such as digital beamforming technology,
tissue harmonic imaging (THI), image speckle suppression, etc.) and digital integrated graphic management system,
and the internal professional measurement software package can fully meet the clinic diagnostic requirement.
2.2 Features
1) Color Doppler (CF), color power Doppler imaging (PDI).
2) Pulse spectrum Doppler (PW),
3) Continuous wave Doppler (CW).
4) Superior in phased array cardiac imaging technology, complete in software package of cardiac measurement function.
5) B+CF Color double-frame real-time imaging.
6) 3D, 4D imaging.
7) Convex array extended imaging.
8) Linear array deflection, trapezoid imaging.
9) Anatomic M-mode imaging.
10) space compounding imaging
11) Tissue harmonic imaging (THI).
12) Contrast agent imaging.
13) Wide scene imaging.
14) Puncture enhanced.
2.3 Performance
1) Display depth: ≥ 300 mm
2) Sync implementation of three modes (B+CFM/PDI+PWD).
3) Extended interface: VIDEO interface, S-VIDEO interface, RJ-45 interface, USB interface, VGA interface.
Safety
u Type of protection against electric shock: class Ⅰ equipment
Degree of protection against electric shock: type B applied part
u Operating voltage: AC 100 V~240 V
u Operating frequency: 50 Hz/60 Hz
u Power consumption: ≤ 100 VA
2.4 Accessories
u One abdominal probe (3.5 MHz)
u One linear probe (7.5 MHz)
u One User Manual
u One power cord
u One adapter
2.5 Physical characteristic
Dimension: 370 mm (L) × 360 mm (W) × 80 mm (H)
Weight: 5.5 kg
2.6 Optional configuration
No.
Accessory name
Purpose
1
Convex probe
Be mainly used for:
1) examination of abdominal tissues (including: liver, gallbladder, spleen, pancreas, kidney, uterus, bladder, prostate, etc.);
2) assessment of fetal growth and fetal maturity in obstetric diagnosis.
2
Microconvex probe
Be mainly used for examination of heart and abdominal tissues.
3
Transrectal probe
Be mainly used for examination of rectum.
4
endo-vaginale probe
Be mainly used for gynecological examination.
5
Linear Probe
Be mainly used for neonate, musculoskeletal system, peripheral vessels, small organs (breast, thyroid, testis, etc.).
6
Phased array probe
Be mainly used for examination of heart and abdominal tissues.
7
Volume probe
Three-dimensional real-time scanning, examination and diagnosis of fetus, abdominal tissues and uterus, etc. Assessment of fetal growth and fetal maturity in obstetric diagnosis.
2.7 Certification
No
3 Selling points analysis
1) Contain rich software packages, which can fully meet the requirements of clinical diagnosis.
2) Anatomic M-mode imaging, contrast imaging.
3) Superior in phased array cardiac imaging technology, complete in software package of cardiac measurement function.
4) Sync implementation of three modes (B+CFM/PDI+PWD).
5) 3D, 4D imaging.
6) Puncture enhanced technology.
Product category: Infusion technology equipment
SP750 Infusion Pump
The product is a volumetric infusion pump, features in high safety, easy operation and long life. Flow control with high accuracy and comprehensive alarm measures ensure patient's safety and optimum therapeutic effect.
Flow control with high accuracy ensures optimum therapeutic effect.
Be compatible with most standard IV Sets.
New IV set provided by user can be calibrated by suppliers, and infusion parameters can be input into the pump, which ensures accuracy.
3.5'' TFT-LCD.
Operate with keys.
Residual infusion time can be displayed during infusing.
With reminder function for starting infusion.
Alarm for occlusion, air bubble, door open and motor failure, etc.
Threshold for air bubble and pressure alarm can be adjusted by medical personnel.
Accompanying IV-set clamp prevents liquid flowing freely when the pump door opens accidentally.
A.B.S——ANTI BOLUS system prevents instantaneous high-dose injection from the sudden obstruction disappearing.
Stop infusing automatically during alarm(except for "NEAR END", "KVO", and "LOW BATTERY" alarms).
Alarm volume can be adjusted.
Power supply: AC/DC and built-in lithium battery.
Compact aluminum enclosures and robust construction.
USB port is convenient for technical personnel to update software..
Infusion parameters can be saved after power off.
Flow control with high accuracy ensures optimum therapeutic effect.
Be compatible with most standard IV Sets.
New IV set provided by user can be calibrated by suppliers, and infusion parameters can be input into the pump, which ensures accuracy.
3.5'' TFT-LCD.
Operate with keys.
Residual infusion time can be displayed during infusing.
With reminder function for starting infusion.
Alarm for occlusion, air bubble, door open and motor failure, etc.
Threshold for air bubble and pressure alarm can be adjusted by medical personnel.
Accompanying IV-set clamp prevents liquid flowing freely when the pump door opens accidentally.
A.B.S——ANTI BOLUS system prevents instantaneous high-dose injection from the sudden obstruction disappearing.
Stop infusing automatically during alarm(except for "NEAR END", "KVO", and "LOW BATTERY" alarms).
Alarm volume can be adjusted.
Power supply: AC/DC and built-in lithium battery.
Compact aluminum enclosures and robust construction.
USB port is convenient for technical personnel to update software..
Infusion parameters can be saved after power off.
Product category: Instruments and apparatus for cardiac and thoracic surgery
CMS5100 Patient Monitor
Introduction
CMS5100 Patient Monitor adopts Oscillometry for NIBP measuring, Photoelectric Oxyhemoglobin Inspection Technology combining Capacity Pulse Scanning & Recording Technology for SpO2 measuring. Systolic Pressure(SYS), Diastolic Pressure(DIA), Mean Pressure(MAP), SpO2 and Pulse rate(PR) can be accurately measured. Compact appearance, comprehensive functions, simple and convenient operation, which is applicable for hospitals, community medical treatment and family.
Main Features
■Be applicable for adult, pediatric and neonatal for all-round monitoring, easy operation and high cost performance.
■Be applicable for medicine, surgery, operating room, ICU/CCU, emergency room, obstetrics and gynecology, pediatrics.
■Built-in rechargeable Li-polymer battery for uninterrupted monitoring.
■Compact and flexible appearance, easy for carrying and be suitable for indoor and outdoor(in ambulance) monitoring.
■With user-friendly interface.
■Display with 2.8'' (320×240) color TFT LCD and red and yellow highlight LED.
■Visual and audible alarm for Systolic Pressure(SYS), Diastolic Pressure(DIA), Mean Pressure(MAP), SpO2 and Pulse rate(PR), and upper and lower limit of alarm can be set.
■Unique Flash memory, storage for up to 2000 NIBP data and 78000 SpO2 data.
■Convenient and quick in inquiring measurement data, review for NIBP trend graph within 24-hour and SpO2 and Pulse rate(PR) trend graph within 20-hour.
CMS5100 Patient Monitor adopts Oscillometry for NIBP measuring, Photoelectric Oxyhemoglobin Inspection Technology combining Capacity Pulse Scanning & Recording Technology for SpO2 measuring. Systolic Pressure(SYS), Diastolic Pressure(DIA), Mean Pressure(MAP), SpO2 and Pulse rate(PR) can be accurately measured. Compact appearance, comprehensive functions, simple and convenient operation, which is applicable for hospitals, community medical treatment and family.
Main Features
■Be applicable for adult, pediatric and neonatal for all-round monitoring, easy operation and high cost performance.
■Be applicable for medicine, surgery, operating room, ICU/CCU, emergency room, obstetrics and gynecology, pediatrics.
■Built-in rechargeable Li-polymer battery for uninterrupted monitoring.
■Compact and flexible appearance, easy for carrying and be suitable for indoor and outdoor(in ambulance) monitoring.
■With user-friendly interface.
■Display with 2.8'' (320×240) color TFT LCD and red and yellow highlight LED.
■Visual and audible alarm for Systolic Pressure(SYS), Diastolic Pressure(DIA), Mean Pressure(MAP), SpO2 and Pulse rate(PR), and upper and lower limit of alarm can be set.
■Unique Flash memory, storage for up to 2000 NIBP data and 78000 SpO2 data.
■Convenient and quick in inquiring measurement data, review for NIBP trend graph within 24-hour and SpO2 and Pulse rate(PR) trend graph within 20-hour.
Product category: Instruments and apparatus for cardiac and thoracic surgery
CMS6000 Patient Monitor
Introduction
The monitor has abundant monitoring functions and is used for monitoring of adult, pediatric and neonate. User may select different parameter configurations according to different requirements. It displays real-time data and waveform by 8'' TFT color LCD, and up to 8-channel waveform and all monitoring parameters can be displayed simultaneously. 48mm thermal printer is optional. In addition, it can be connected to the central monitoring system via wired/wireless network so as to form a network monitoring system.
This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual- channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving.
Main Features
■8'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Operation mode: keys and buttons.
■Display up to 8-channel waveform on one screen.
■Display 7-lead ECG waveform on one screen, and with ECG step function.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■HRV analysis function.
■NIBP measurement mode: Manual/AUTO/STAT, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Print trend table data with one-key.
■Connect to Central Monitoring System by 3G, WiFi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
The monitor has abundant monitoring functions and is used for monitoring of adult, pediatric and neonate. User may select different parameter configurations according to different requirements. It displays real-time data and waveform by 8'' TFT color LCD, and up to 8-channel waveform and all monitoring parameters can be displayed simultaneously. 48mm thermal printer is optional. In addition, it can be connected to the central monitoring system via wired/wireless network so as to form a network monitoring system.
This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual- channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving.
Main Features
■8'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Operation mode: keys and buttons.
■Display up to 8-channel waveform on one screen.
■Display 7-lead ECG waveform on one screen, and with ECG step function.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■HRV analysis function.
■NIBP measurement mode: Manual/AUTO/STAT, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Print trend table data with one-key.
■Connect to Central Monitoring System by 3G, WiFi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
Product category: Instruments and apparatus for cardiac and thoracic surgery
CMS8000 Patient Monitor
Introduction
The monitor has abundant functions that can be used for clinical monitoring with adult, pediatric and neonate. Users may select different parameter configuration according to different requirements. The monitor, power supplied by 100-240V～,50/60Hz, adopts 12.1'' color TFT LCD displaying real-time date and waveform. It can synchronously display eight-channel waveform and full monitoring parameters equipped with an optional 48mm thermal recorder. The monitor can be connected to the central monitoring system via wire or wireless network to form a network monitoring system.
This device can monitor such parameters as ECG, RESP, NIBP, SpO2, and dual-channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. Its replaceable internal battery brings lot of convenient for patient moving.
Main Features
■12.1'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakh, Polish, Czech).
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, oxygen graph, trend graph, big character interface and view bed, convenient to observe.
■Finish all operations by keys and knobs.
■Maximum 8-channel waveform synchronous display.
■Display 7-lead ECG waveform on one screen, cascade ECG waveform display
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■Heart rate variability (HRV) analysis function
■NIBP measurement mode: Manual/AUTO/STAT, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■One-touch printing of trend graph
■Connect to Central Monitoring System by 3G, Wi-Fi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof (special leads are necessary).
The monitor has abundant functions that can be used for clinical monitoring with adult, pediatric and neonate. Users may select different parameter configuration according to different requirements. The monitor, power supplied by 100-240V～,50/60Hz, adopts 12.1'' color TFT LCD displaying real-time date and waveform. It can synchronously display eight-channel waveform and full monitoring parameters equipped with an optional 48mm thermal recorder. The monitor can be connected to the central monitoring system via wire or wireless network to form a network monitoring system.
This device can monitor such parameters as ECG, RESP, NIBP, SpO2, and dual-channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. Its replaceable internal battery brings lot of convenient for patient moving.
Main Features
■12.1'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakh, Polish, Czech).
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, oxygen graph, trend graph, big character interface and view bed, convenient to observe.
■Finish all operations by keys and knobs.
■Maximum 8-channel waveform synchronous display.
■Display 7-lead ECG waveform on one screen, cascade ECG waveform display
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■Heart rate variability (HRV) analysis function
■NIBP measurement mode: Manual/AUTO/STAT, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■One-touch printing of trend graph
■Connect to Central Monitoring System by 3G, Wi-Fi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof (special leads are necessary).
Product category: Instruments and apparatus for cardiac and thoracic surgery
CMS9200 Patient Monitor
Introduction
This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual-channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving.
Main Features
■15'' TFT color LCD, 15-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Operation mode: keys and buttons.
■Display up to 8-channel waveform on one screen.
■Display 7-lead ECG waveform on one screen, and with ECG step function.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■HRV analysis function.
■NIBP measurement mode: Manual/AUTO/Continuous, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Print trend table data with one-key.
■Connect to Central Monitoring System by 3G, WiFi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual-channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving.
Main Features
■15'' TFT color LCD, 15-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Operation mode: keys and buttons.
■Display up to 8-channel waveform on one screen.
■Display 7-lead ECG waveform on one screen, and with ECG step function.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■HRV analysis function.
■NIBP measurement mode: Manual/AUTO/Continuous, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Print trend table data with one-key.
■Connect to Central Monitoring System by 3G, WiFi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
Product category: Respiration equipment, oxygen equipment
OC5B Oxygen Concentrator
OC5B Oxygen Concentrator consisted of air compressor, adsorption tower of molecular sieve, sensor and flow meter. With the molecular sieve to be absorbent, the machine adopts PSA(pressure swing absorbers ) method to directly concentrate medical oxygen with high concentration from the air.
It is small and portable. The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with requirements of medical device. The machine can also realizes the measurement and display of SpO2 and pulse rate, medication atomization by connecting accessories.
The machine has a wide application, including family, clinic, hospital, oxygen bar, plateau outpost, gym center, etc.
It is small and portable. The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with requirements of medical device. The machine can also realizes the measurement and display of SpO2 and pulse rate, medication atomization by connecting accessories.
The machine has a wide application, including family, clinic, hospital, oxygen bar, plateau outpost, gym center, etc.
Product category: Respiration equipment, oxygen equipment, Inhaler and aerosol appliances
NE-M01 Mesh Nebulizer
The device forms nebulizing effect by the high-frequency vibration of piezoelectric ceramic and microplate to smash the liquid, which is applicable for use in hospital, clinic and family.
Features
1) Small in volume, light in weight, easy to operate, safety and no noise in using.
2) Low power consumption(two batteries).
3) One-button operation, convenient to use.
4) Small in particle size(about 5um), goes deeper to lung, easy to absorb.
5) Automatic power off when there is no liquid.
2.2 Functions
1) One-button operation.
2) Power indication.
3) Low-battery detection.
4) Automatic power off when there is no liquid.
Features
1) Small in volume, light in weight, easy to operate, safety and no noise in using.
2) Low power consumption(two batteries).
3) One-button operation, convenient to use.
4) Small in particle size(about 5um), goes deeper to lung, easy to absorb.
5) Automatic power off when there is no liquid.
2.2 Functions
1) One-button operation.
2) Power indication.
3) Low-battery detection.
4) Automatic power off when there is no liquid.
Product category: Respiration equipment, oxygen equipment, Inhaler and aerosol appliances
NE-J01 Compressor Nebulizer
The compressor nebulizer can convert medication to tiny particles, which can be easily inhaled into respiratory system along with human breath to cure respiratory diseases such as acute and chronic tracheitis, bronchitis, sore throat and asthma.
Power supply: AC220V, 50Hz
Input power: ＜150VA
Nebulization rate: >0.15mL/min
Medication residue: ≤ 0.7mL
Volume for atomizing cup: 8mL
Appropriate medication range: 2~8mL
Noise: ≤ 65dB
Gas flow: >10L/min
Max pressure: 280-450KPa
Type of protection against electric shock: Class Ⅱ
Degree of protection against electric shock: Type B applied part
Degree of waterproof and dustproof: IP22
Power supply: AC220V, 50Hz
Input power: ＜150VA
Nebulization rate: >0.15mL/min
Medication residue: ≤ 0.7mL
Volume for atomizing cup: 8mL
Appropriate medication range: 2~8mL
Noise: ≤ 65dB
Gas flow: >10L/min
Max pressure: 280-450KPa
Type of protection against electric shock: Class Ⅱ
Degree of protection against electric shock: Type B applied part
Degree of waterproof and dustproof: IP22
Product category: Respiration equipment, oxygen equipment
Spirometer SP80B
The SPIROMETER is a hand-held equipment for checking lung conditions, adopts the infrared signal acquisition mode for measuring items related to FVC, and it is applicable for hospital, clinic, family for routine test.
1. Forced Vital Capacity (FVC), forced expiratory volume in one second (FEV1) to forced vital capacity (FVC) ratio (FEV1/FVC), peak expiratory flow (PEF), forced expiratory flow at 25 % of FVC (FEF25), forced expiratory flow at 50 % of FVC (FEF50), forced expiratory flow at 75 % of FVC (FEF75) and forced expiratory flow from 25 %~ 75 % of FVC (FEF2575) can be measured;
2.Flow-volume chart, volume-time chart display,Trend chart display.
3. Indicate expiration within 6 seconds by indicators.
4.The data can be transmitted by Bluetooth or USB cable.
1. Forced Vital Capacity (FVC), forced expiratory volume in one second (FEV1) to forced vital capacity (FVC) ratio (FEV1/FVC), peak expiratory flow (PEF), forced expiratory flow at 25 % of FVC (FEF25), forced expiratory flow at 50 % of FVC (FEF50), forced expiratory flow at 75 % of FVC (FEF75) and forced expiratory flow from 25 %~ 75 % of FVC (FEF2575) can be measured;
2.Flow-volume chart, volume-time chart display,Trend chart display.
3. Indicate expiration within 6 seconds by indicators.
4.The data can be transmitted by Bluetooth or USB cable.
Product category: Respiration equipment, oxygen equipment
CMS50D Pulse Oximeter
Introduction
Principle of the CMS50D Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Main Features
■SpO2 value display
■Pulse rate value display, bar graph display
■Pulse waveform display
■The display mode can be changed
■Screen brightness can be changed
■Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage.
Principle of the CMS50D Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Main Features
■SpO2 value display
■Pulse rate value display, bar graph display
■Pulse waveform display
■The display mode can be changed
■Screen brightness can be changed
■Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage.
Product category: Respiration equipment, oxygen equipment
CMS50DL Pulse Oximeter
Introduction
Principle of the CMS50DL Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Main Features
■Integrated with SpO2 probe and processing display module
■Small in volume、light in weight and convenient in carrying
■Operation of the product is simple ,low power consumption
■SpO2 value display
■Pulse rate value display, bar graph display
■Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
■Various color of cover can be selected
Principle of the CMS50DL Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Main Features
■Integrated with SpO2 probe and processing display module
■Small in volume、light in weight and convenient in carrying
■Operation of the product is simple ,low power consumption
■SpO2 value display
■Pulse rate value display, bar graph display
■Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
■Various color of cover can be selected
Product category: Instruments and apparatus for cardiac and thoracic surgery, eHealth, telemedicine / telematics / telemetry
PM10 Portable ECG Monitor
Introduction:
PM10 Portable ECG Monitor is a device for checking ECG,which is applicable for family and individual user, it is a good helper to early prevent from cardiovascular diseases and reduce risks.
Intelligent design, achieves remote health management by using with mobile application, it can automatically start measurement, store ECG, upload data, download health conclusion and obtain doctor advice at the first moment.
Main Features
1.77" color TFT-LCD.
Quickly to check ECG once finger touching, convenient to operate.
Accurate conclusion can be obtained immediately after measuring.
The built-in rechargeable lithium battery can continuously record for up to 500 cases in full charging.
Bluetooth transmission.
ECG data can be saved to CLOUD Platform permanently, convenient to check and analyze.
Historical data can be printed at any time, convenient to diagnose.
PM10 Portable ECG Monitor is a device for checking ECG,which is applicable for family and individual user, it is a good helper to early prevent from cardiovascular diseases and reduce risks.
Intelligent design, achieves remote health management by using with mobile application, it can automatically start measurement, store ECG, upload data, download health conclusion and obtain doctor advice at the first moment.
Main Features
1.77" color TFT-LCD.
Quickly to check ECG once finger touching, convenient to operate.
Accurate conclusion can be obtained immediately after measuring.
The built-in rechargeable lithium battery can continuously record for up to 500 cases in full charging.
Bluetooth transmission.
ECG data can be saved to CLOUD Platform permanently, convenient to check and analyze.
Historical data can be printed at any time, convenient to diagnose.
Product category: Respiration equipment, oxygen equipment, Wearable technologies, smart textiles
CMS50S Pulse Oximeter
Selling Points analysis
It is a wrist pulse oximeter, humanized design, confortable to wear.
Thin and fashion appearance, compact structure, low power consumption, high cost-performance.
Easy to operate, convenient to use
Functions
1)Low-voltage indication: the low-voltage indication symbol appears when the voltage is too low to work.
2)Automatic standby function.
3)Data storage function.
4)The data can be uploaded to terminal equipment by wireless mode.
5)Charging function.
It is a wrist pulse oximeter, humanized design, confortable to wear.
Thin and fashion appearance, compact structure, low power consumption, high cost-performance.
Easy to operate, convenient to use
Functions
1)Low-voltage indication: the low-voltage indication symbol appears when the voltage is too low to work.
2)Automatic standby function.
3)Data storage function.
4)The data can be uploaded to terminal equipment by wireless mode.
5)Charging function.
Product category: Devices for measuring body temperature / thermometer
Infrared Thermometer TP500
A medical infrared thermometer, which does not contain harmful substances, such as mercury.
Physiological effect: no adverse reactions (such as, toxicity, irritation, sensitization, etc.) appears during measuring.
Unit: Celsius (℃) / Fahrenheit (℉)
Display: color TFT LCD.
Automatic shutdown after measuring.
Operating mode: continuous operation
Memory data: 30 groups
Power management: intelligent shutdown, ultra-low power consumption, power display and low-battery prompt.
Physiological effect: no adverse reactions (such as, toxicity, irritation, sensitization, etc.) appears during measuring.
Unit: Celsius (℃) / Fahrenheit (℉)
Display: color TFT LCD.
Automatic shutdown after measuring.
Operating mode: continuous operation
Memory data: 30 groups
Power management: intelligent shutdown, ultra-low power consumption, power display and low-battery prompt.
Product category: Respiration equipment, oxygen equipment
CMS50D1
Introduction
Principle of the CMS50D1 Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Main Features
■Integrated with SpO2 probe and processing display module
■Small in volume、light in weight and convenient in carrying
■Operation of the product is simple ,low power consumption
■SpO2 value display
■Pulse rate value display, bar graph display
■Pulse waveform display
■The display mode can be changed
■Screen brightness can be changed
■Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
Principle of the CMS50D1 Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Main Features
■Integrated with SpO2 probe and processing display module
■Small in volume、light in weight and convenient in carrying
■Operation of the product is simple ,low power consumption
■SpO2 value display
■Pulse rate value display, bar graph display
■Pulse waveform display
■The display mode can be changed
■Screen brightness can be changed
■Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
Product category: Respiration equipment, oxygen equipment
CMS50DL1
Introduction
Principle of the CMS50DL1 Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Main Features
■Integrated with SpO2 probe and processing display module
■Small in volume、light in weight and convenient in carrying
■Operation of the product is simple ,low power consumption
■SpO2 value display
■Pulse rate value display, bar graph display
■Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
Principle of the CMS50DL1 Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Main Features
■Integrated with SpO2 probe and processing display module
■Small in volume、light in weight and convenient in carrying
■Operation of the product is simple ,low power consumption
■SpO2 value display
■Pulse rate value display, bar graph display
■Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
Product category: Respiration equipment, oxygen equipment
SP70B Spirometer
Parameters：
Forced Vital Capacity (FVC), forced expiratory volume in one second (FEV1) to forced vital capacity (FVC) ratio (FEV1/FVC), peak expiratory flow (PEF), forced expiratory flow at 25 % of FVC (FEF25), forced expiratory flow at 50 % of FVC (FEF50), forced expiratory flow at 75 % of FVC (FEF75) and forced expiratory flow from 25 % ~ 75 % of FVC (FEF2575) can be measured.
Flow - volume chart, volume - time chart display.
The data can be stored, deleted, uploaded and reviewed.
Trend chart display.
Health state indication.
Bluetooth transmission.
Battery power indication.
Forced Vital Capacity (FVC), forced expiratory volume in one second (FEV1) to forced vital capacity (FVC) ratio (FEV1/FVC), peak expiratory flow (PEF), forced expiratory flow at 25 % of FVC (FEF25), forced expiratory flow at 50 % of FVC (FEF50), forced expiratory flow at 75 % of FVC (FEF75) and forced expiratory flow from 25 % ~ 75 % of FVC (FEF2575) can be measured.
Flow - volume chart, volume - time chart display.
The data can be stored, deleted, uploaded and reviewed.
Trend chart display.
Health state indication.
Bluetooth transmission.
Battery power indication.
Product category: Respiration equipment, oxygen equipment
SPIROMETER SP10
Forced Vital Capacity (FVC), Forced Expired Volume in one second (FEV1), the ratio of FEV1 and FVC (FEV1%), Peak expiratory flow (PEF), 25% flow of the FVC (FEF25), 75% flow of the FVC(FEF75) and average flow between 25% and 75% of the FVC(FEF2575) can be measured. Besides, the testee condition can be shown by the ratio of the measured value and the predicted value.
■Flow rate-volume chart, volume-time chart display.
■Data memory,delete, upload and review.
■Trend chart display.
■Scaling(Calibration).
■Information prompts when volume or flow goes beyond the limits.
■Automatic power off when there is no operation in one minute.
■Rechargeable lithium battery and with charging tips.
■Battery power display.
■Flow rate-volume chart, volume-time chart display.
■Data memory,delete, upload and review.
■Trend chart display.
■Scaling(Calibration).
■Information prompts when volume or flow goes beyond the limits.
■Automatic power off when there is no operation in one minute.
■Rechargeable lithium battery and with charging tips.
■Battery power display.
Product category: Analyser systems / equipment
HA3100 Hematology
The Automatic Hematology Analyzer is an in vitro diagnostic device that used for quantitative analysis of blood cells in medical laboratories, and it can realize three classifications of the count results of white blood cells. This analyzer is a clinical inspection instrument for screening. When making a clinical judgment based on the analysis results, the doctor should take the clinical examination results or other test results into consideration. This analyzer is suitable for the detection of white blood cells, red blood cells, platelets, hemoglobin and other parameters and counting of white blood cells into three classifications.
Automatic storage of test results, review and print all parameters in test results;
Color touch screen, all parameters and histograms can be displayed in the same screen;
Support the expansion of external devices such as mouse, keyboard and printer;
Optical five reference ranges: newborn, children, adult women, adult men, and general use;
Multiple clogging elimination methods: high-pressure burning jewel hole, high-pressure reverse rinsing and soaking;
Automatic cleaning of sample probe;
By VGA interface, external projector or external display screen can be connected;
Chinese and English system language;
Built-in thermal printer, serial port printing and other printing methods;
With quality control management and calibration management function;
Use the cyanide-free SFT method (environmentally friendly) to measure hemoglobin;
Floating boundary algorithm and histogram abnormal prompt function.
Automatic storage of test results, review and print all parameters in test results;
Color touch screen, all parameters and histograms can be displayed in the same screen;
Support the expansion of external devices such as mouse, keyboard and printer;
Optical five reference ranges: newborn, children, adult women, adult men, and general use;
Multiple clogging elimination methods: high-pressure burning jewel hole, high-pressure reverse rinsing and soaking;
Automatic cleaning of sample probe;
By VGA interface, external projector or external display screen can be connected;
Chinese and English system language;
Built-in thermal printer, serial port printing and other printing methods;
With quality control management and calibration management function;
Use the cyanide-free SFT method (environmentally friendly) to measure hemoglobin;
Floating boundary algorithm and histogram abnormal prompt function.
Product category: Analyser systems / equipment
BC300 Semi Auto Biochemistry Analyzer
The device measures biochemical indexes by analyzing blood and other body fluid, then combines with other clinical information, to help diagnose disease, evaluate organs function, identify disease gene and determine the norm for future therapy.
Based on Linux operating system, color graphical interface. Operate by touch screen, function keys or external USB mouse, keyboard.
Optional measurement methods (End point, Two-point, kinetics, double wavelength, etc.) and calculation methods (factor, linear regression, nonlinear regression, etc.).
Store 500 test items and 10000 test results, with multiple print modes and reports.
Each item can be set quality control of two batch No. Automatically statistic and draw QC chart, store QC data and chart within one year, which can be checked and printed.
Auto-dormancy for the lamp to prolong its life.
Power-off protection function: automatically save measurement results.
Self-check function: alarm for light path, liquid path and mechanical components failure.
Standard communication interface, convenient for data transmission and processing.
Based on Linux operating system, color graphical interface. Operate by touch screen, function keys or external USB mouse, keyboard.
Optional measurement methods (End point, Two-point, kinetics, double wavelength, etc.) and calculation methods (factor, linear regression, nonlinear regression, etc.).
Store 500 test items and 10000 test results, with multiple print modes and reports.
Each item can be set quality control of two batch No. Automatically statistic and draw QC chart, store QC data and chart within one year, which can be checked and printed.
Auto-dormancy for the lamp to prolong its life.
Power-off protection function: automatically save measurement results.
Self-check function: alarm for light path, liquid path and mechanical components failure.
Standard communication interface, convenient for data transmission and processing.
Product category: eHealth, telemedicine / telematics / telemetry
HMS9900 Multi Parameter Vital Signs Monitor
HMS9900 is a device with remote self-examination function, after verifying by entering account and password, user' ECG, SpO2, NIBP, TEMP, blood glucose, routine urine, lung function, height, weight, cholesterol and uric acid can be tested, and the examination report can be uploaded to Cloud Health platform, which ensures the health data can be real-time uploaded, achieves remote interaction of health service. Application range: community service station, physical examination center, clinic, enterprise, health club, bank, apartment for the elderly and pharmacy, etc.
Self-examination: Integrated examination, self-service measurement
Multi-data collection: Standard parameters: ECG, NIBP, SpO2, temperature, weight, blood glucose, routine urine, lung function
Network mode: Wired, Wi-Fi, 3G
Login by multi-mode: Phone number, health card
*Cloud storage: Data measured can be uploaded to Cloud Health platform, safe and private to manage health archives, convenient to inquire anywhere anytime.
*Private health cloud service: Long-term storage, analysis and review for physiological trend data
*Health management service: Provide health instruction and consultation service by cloud experts.
Registration: Register by the phone number.
Note: the contents marked with “*” are provided by cloud terminal.
Self-examination: Integrated examination, self-service measurement
Multi-data collection: Standard parameters: ECG, NIBP, SpO2, temperature, weight, blood glucose, routine urine, lung function
Network mode: Wired, Wi-Fi, 3G
Login by multi-mode: Phone number, health card
*Cloud storage: Data measured can be uploaded to Cloud Health platform, safe and private to manage health archives, convenient to inquire anywhere anytime.
*Private health cloud service: Long-term storage, analysis and review for physiological trend data
*Health management service: Provide health instruction and consultation service by cloud experts.
Registration: Register by the phone number.
Note: the contents marked with “*” are provided by cloud terminal.
Product category: Analyser systems / equipment
BC401 Urine Analyzer
BC401 Urine Analyzer is a high-precision, intellectual instrument which is researched and developed basing on modern optics, electronics, computer science and other advanced technologies for clinical inspection of urine. GLU, BIL, SG, KET, BLD, PRO, URO, NIT, LEU, VC, PH, MAL, CR and UCA in urine can be tested by using it with special test strips. And it is applicable for use in hospital, community health service, clinic, epidemic station and family, etc.
High-luminance and white LED, features in long life and good stability.
Display abundant contents by the 2.4'' LCD, optional languages: Chinese and English.
User-friendly interface.
Optional units: international unit, conventional unit and symbol system.
Monitoring the whole test process, auto-character and audible prompt.
Be compatible with 8, 10, 11, 12, 14-parameter test strip (optional based on the type of test strip).
Standard MicroUSB interface, Bluetooth interface (Optional).
High-luminance and white LED, features in long life and good stability.
Display abundant contents by the 2.4'' LCD, optional languages: Chinese and English.
User-friendly interface.
Optional units: international unit, conventional unit and symbol system.
Monitoring the whole test process, auto-character and audible prompt.
Be compatible with 8, 10, 11, 12, 14-parameter test strip (optional based on the type of test strip).
Standard MicroUSB interface, Bluetooth interface (Optional).
Product category: eHealth, telemedicine / telematics / telemetry
HMS7500 Multi Parameter Vital Signs Monitor
HMS7500 is a portable medical device which takes community aging users as the center, general doctors as the main application objects. It is convenient to visit every family at any time, and user can finish all examinations at home. The device is consisted of host, Bluetooth collection terminal and accessories, which can measure multi-parameter, such as 12-lead ECG, blood pressure(adult, child and pediatric), SpO2, blood glucose, temperature and routine urine, etc. Data measured can be uploaded to Cloud Health platform, which provides effective health management for user and support for clinical decision, helps hospital to enhance medical decision, hospital management and medical level.
Portable examination: Portable design, resolves the problems of household survey for general doctors.
Multi-parameter collection: Standard parameters: ECG, NIBP, SpO2, temperature, blood glucose, routine urine
Bluetooth transmission: Data collected by Blood Glucose Meter, Urine Analyzer and Thermometer can be transmitted by Bluetooth.
Offline collection: Data can be collected under the state of no network or unstable network.
Data upload: Data collected in offline state can be uploaded to PHMS again until stable network.
Login by multi-mode: Phone number, health card
Network mode: Wired, Wi-Fi, 3G
Registration: Register by the phone number.
*Cloud storage: Data measured can be uploaded to Cloud Health platform, safe and private to manage health archives, convenient to inquire anywhere anytime.
*Private health cloud service: Long-term storage, analysis and review for physiological trend data
*Health management service: Provide health instruction and consultation service by cloud experts.
Note: the contents marked with “*” are provided by cloud terminal.
Portable examination: Portable design, resolves the problems of household survey for general doctors.
Multi-parameter collection: Standard parameters: ECG, NIBP, SpO2, temperature, blood glucose, routine urine
Bluetooth transmission: Data collected by Blood Glucose Meter, Urine Analyzer and Thermometer can be transmitted by Bluetooth.
Offline collection: Data can be collected under the state of no network or unstable network.
Data upload: Data collected in offline state can be uploaded to PHMS again until stable network.
Login by multi-mode: Phone number, health card
Network mode: Wired, Wi-Fi, 3G
Registration: Register by the phone number.
*Cloud storage: Data measured can be uploaded to Cloud Health platform, safe and private to manage health archives, convenient to inquire anywhere anytime.
*Private health cloud service: Long-term storage, analysis and review for physiological trend data
*Health management service: Provide health instruction and consultation service by cloud experts.
Note: the contents marked with “*” are provided by cloud terminal.
Product category: eHealth, telemedicine / telematics / telemetry, Respiration equipment, oxygen equipment
CMS50D-BT
Introduction:
CMS50D-BT Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and PR value through the finger, which provides advanced, non-invasive and scientific means for quantitative measurement of oxygen saturation. CMS50D-BT Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc.
CMS50D-BT Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc.
Main Features:
Display of SpO2 value, PR value, bar graph and pulse waveform.
Low-voltage indication: the low power indication symbol appears when the voltage is too low to work.
Automatic standby function.
Display direction can be changed automatically.
PR sound indication (wired equipment).
Sound prompt function: over-limit prompt of measured value, finger-out prompt, low power prompt (wired equipment).
Data memory function.
The data can be uploaded to the terminal equipment (wired equipment and Bluetooth wired equipment) by wired mode.
The data can be uploaded to the terminal equipment (Bluetooth equipment and Bluetooth wired equipment) by wireless mode.
CMS50D-BT Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and PR value through the finger, which provides advanced, non-invasive and scientific means for quantitative measurement of oxygen saturation. CMS50D-BT Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc.
CMS50D-BT Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc.
Main Features:
Display of SpO2 value, PR value, bar graph and pulse waveform.
Low-voltage indication: the low power indication symbol appears when the voltage is too low to work.
Automatic standby function.
Display direction can be changed automatically.
PR sound indication (wired equipment).
Sound prompt function: over-limit prompt of measured value, finger-out prompt, low power prompt (wired equipment).
Data memory function.
The data can be uploaded to the terminal equipment (wired equipment and Bluetooth wired equipment) by wired mode.
The data can be uploaded to the terminal equipment (Bluetooth equipment and Bluetooth wired equipment) by wireless mode.
Product category: Ultrasound diagnostic equipment
Sonoline B pocket fetal doppler
Introduction
Sonoline B/SONOTRAX B Pocket Fetal Doppler is a hand-held fetal heart rate detecting device adopted Doppler theory. It outputs sound signals through headphone. With easy and convenient operation, it can be used in hospital and clinic for daily self-check by pregnant woman, realizing early monitoring and care for life.
Function
Built-in speaker
Three working mode: Real-time FHR Display Mode, Averaged FHR Display Mode and Manual Mode
LCD screen
Battery status indication
Auto shut off if there is no signal within 1 minute
High sensitive doppler probe, fetal heart sound can be heard clearly for pregnancy more than 12 weeks
Low consumption, two AALR6 batteries can last more than 8 hours for normal use
Pluggable USB probe interface, probe can be replaced
Sonoline B/SONOTRAX B Pocket Fetal Doppler is a hand-held fetal heart rate detecting device adopted Doppler theory. It outputs sound signals through headphone. With easy and convenient operation, it can be used in hospital and clinic for daily self-check by pregnant woman, realizing early monitoring and care for life.
Function
Built-in speaker
Three working mode: Real-time FHR Display Mode, Averaged FHR Display Mode and Manual Mode
LCD screen
Battery status indication
Auto shut off if there is no signal within 1 minute
High sensitive doppler probe, fetal heart sound can be heard clearly for pregnancy more than 12 weeks
Low consumption, two AALR6 batteries can last more than 8 hours for normal use
Pluggable USB probe interface, probe can be replaced
Product category: Ultrasound diagnostic equipment
Sonoline C pocket fetal doppler
Introduction
Sonoline C Pocket Fetal Doppler is a hand-held fetal heart rate detecting device adopted Doppler theory. It can be used in hospital and clinic for daily self-check by pregnant woman. The device adopts color LCD screen of high resolution, which can display the fetal heartbeat waveform and calculate the FHR value to help doctors for diagnosis in time.
Function
Delicate and compact design, portable and easy to use
Crooked probe structure, which is easy to operate and increases the feeling of comfort, embodies the humanized design.
Three working mode: Real-time FHR Display Mode, Averaged FHR Display Mode and Manual Mode
FHR values, bar graph and heartbeat waveform color display
Alarming in red when the FHR value is out of the normal range.
Probe falls off detection, battery status indication
Automatic shutdown: The device will automatically turn off if there is no signal within 1 minute.
Audio interface: Can be connected to other recording devices by recording cable, record fetal heart sound in real-time
Two 1.5V batteries (AA LR6) can last more than 8 hours for normal use
Sonoline C Pocket Fetal Doppler is a hand-held fetal heart rate detecting device adopted Doppler theory. It can be used in hospital and clinic for daily self-check by pregnant woman. The device adopts color LCD screen of high resolution, which can display the fetal heartbeat waveform and calculate the FHR value to help doctors for diagnosis in time.
Function
Delicate and compact design, portable and easy to use
Crooked probe structure, which is easy to operate and increases the feeling of comfort, embodies the humanized design.
Three working mode: Real-time FHR Display Mode, Averaged FHR Display Mode and Manual Mode
FHR values, bar graph and heartbeat waveform color display
Alarming in red when the FHR value is out of the normal range.
Probe falls off detection, battery status indication
Automatic shutdown: The device will automatically turn off if there is no signal within 1 minute.
Audio interface: Can be connected to other recording devices by recording cable, record fetal heart sound in real-time
Two 1.5V batteries (AA LR6) can last more than 8 hours for normal use
Product category: Blood pressure monitoring equipment
CONTEC08A-BT Electronic Sphygmomanometer
Introduction
CONTEC08A-BT is a device measured human body BP(blood pressure) parameters, which features in user-friendly interface, high-resolution color LCD, strong in visuality, easy to operate, Bluetooth transmission, diagnosing by remote experts, SpO2 measurement function(SpO2 is necessary). It can be applied to family, clinic and physical center for routine measurement.
Features
1)High-resolution color LCD. Optional interface languages: Chinese and English, strong in visuality.
2)Optional measurement mode: adult, neonatal and pediatric.
3)Full-automatic NIBP measurement. Oscillometry measurement principle, multistep deflation measurement, high in measurement repeatability. And the device will display corresponding error information when measurement error appears.
4)Prompt for over-limit of physiological parameters, and the upper and lower limit can be set.
5)Wireless transmission function. NIBP data saved in the device can be transmitted to mobile client by Bluetooth.
6)Optional measurement units: mmHg and kPa, which can be switched according to requirements. Visual and audible prompt when low-battery appears.
7)Timing shutdown function, and with short-time power storage function, when replacing the battery, the clock time will not be influenced.
8)Large-capacity storage. NIBP data can be checked by the data review interface, such as "data list","trend graph","big font" interface, etc.
9)With SpO2 measurement function(SpO2 probe is necessary).
Performance
1)NIBP
Measurement method: Oscillometry
Measurement mode: upper-arm type
Measurement range: 0kPa(0mmHg)~ 38.67kPa(290mmHg)
Resolution: 1mmHg
Accuracy: ±3mmHg
Inflation: automatic inflation by force pump
Deflation: automatic multistep deflation
2)SpO2(optional)
Measurement range: 0%~100%
Resolution: 1%
Accuracy: 70%~100%, ±2%
0%~69%, unspecified
Pulse rate:
Measurement range: 30bpm~250bpm
Resolution: 1bpm
Accuracy: ±2bpm or ±2%, whichever is greater
3)Display: 2.8"color LCD
4)Power: four "AA" batteries/5V or 6V power adapter
5)Safety character: classⅡ, type BF applied part
Accessories
Cuff for adult
SpO2 probe (optional)
User manual
Power adapter(optional)
Cuffs for other size(optional)
Physical characteristic
Dimension: 130 mm(L)×110 mm(W)×80 mm(H)
Weight: 300g (without batteries)
Operation environment
Temperature: 5 ˚C~40 ˚C
Relative humidity: 15%~85%
Atmospheric pressure: 700hPa~1060hPa
Storage environment:
Temperature: -20˚C ~ +55 ˚C
Relative humidity: ≤95 %
Atmospheric pressure: 700 hPa~1060 hPa
CONTEC08A-BT is a device measured human body BP(blood pressure) parameters, which features in user-friendly interface, high-resolution color LCD, strong in visuality, easy to operate, Bluetooth transmission, diagnosing by remote experts, SpO2 measurement function(SpO2 is necessary). It can be applied to family, clinic and physical center for routine measurement.
Features
1)High-resolution color LCD. Optional interface languages: Chinese and English, strong in visuality.
2)Optional measurement mode: adult, neonatal and pediatric.
3)Full-automatic NIBP measurement. Oscillometry measurement principle, multistep deflation measurement, high in measurement repeatability. And the device will display corresponding error information when measurement error appears.
4)Prompt for over-limit of physiological parameters, and the upper and lower limit can be set.
5)Wireless transmission function. NIBP data saved in the device can be transmitted to mobile client by Bluetooth.
6)Optional measurement units: mmHg and kPa, which can be switched according to requirements. Visual and audible prompt when low-battery appears.
7)Timing shutdown function, and with short-time power storage function, when replacing the battery, the clock time will not be influenced.
8)Large-capacity storage. NIBP data can be checked by the data review interface, such as "data list","trend graph","big font" interface, etc.
9)With SpO2 measurement function(SpO2 probe is necessary).
Performance
1)NIBP
Measurement method: Oscillometry
Measurement mode: upper-arm type
Measurement range: 0kPa(0mmHg)~ 38.67kPa(290mmHg)
Resolution: 1mmHg
Accuracy: ±3mmHg
Inflation: automatic inflation by force pump
Deflation: automatic multistep deflation
2)SpO2(optional)
Measurement range: 0%~100%
Resolution: 1%
Accuracy: 70%~100%, ±2%
0%~69%, unspecified
Pulse rate:
Measurement range: 30bpm~250bpm
Resolution: 1bpm
Accuracy: ±2bpm or ±2%, whichever is greater
3)Display: 2.8"color LCD
4)Power: four "AA" batteries/5V or 6V power adapter
5)Safety character: classⅡ, type BF applied part
Accessories
Cuff for adult
SpO2 probe (optional)
User manual
Power adapter(optional)
Cuffs for other size(optional)
Physical characteristic
Dimension: 130 mm(L)×110 mm(W)×80 mm(H)
Weight: 300g (without batteries)
Operation environment
Temperature: 5 ˚C~40 ˚C
Relative humidity: 15%~85%
Atmospheric pressure: 700hPa~1060hPa
Storage environment:
Temperature: -20˚C ~ +55 ˚C
Relative humidity: ≤95 %
Atmospheric pressure: 700 hPa~1060 hPa
Product category: Blood pressure monitoring equipment
CONTEC08C Electronic Sphygmomanometer
Introduction
CONTEC08C is a desktop Electronic Sphygmomanometer,with segment LCD. It can measure SpO2 and NIBP accurately,and display measure result with big font.The Electronic Sphygmomanometer can store the measure results of three users, and up to 99 items for every user. With review record data function, easy to use. It can be applied to the clinique,physical center and daily health care of family member.
Features
Fully automatic blood pressure measure.
Stores the measure results of three users, and up to 99 items for every user. Free to switch, easy to use.
Display measure data with big font digital LCD. NIBP data is clear at a glance.
When there are factors which affect the measure in the process of measure and the device can't get the measure result, the device can display the corresponding error message.
With the functions of time setting, blood pressure measure, user switching and data review. The operation is simple.
With short-time power storage function, when replacing the battery, the clock time function can't be affected.
Supply two kinds of NIBP measure unit: mmHg / kPa.According to habit to switch.
With SpO2 measure function(with optional SpO2 probe).
With function of automatic power-off. The device will be off automatically when there is no operation for a long time(more than 5 minutes ) or low power.
Communicate with PC, PC software can achieve data review, analysis measure results, seeing trend, printing reports and other functions.
Performance:
NIBP
Measure Method: Oscillometry
Measure Mode: The upper arm measure
Measure range: 0kPa(0mmHg)~ 38.67kPa(290mmHg)
Resolution: 0.133kPa(1mmHg)
Accuracy: ±0.4kPa(±3mmHg)
NIBP pulse rate measure range: 40~240bpm
Increasing pressure mode: force pump increases pressure automatically
Reducing pressure mode: self-motion ladder reducing pressure mode
SpO2(optional)
Measure range: 35%~100%
Accuracy:±2% ,70%~100%
SpO2 Probe Pulse Rate :
Measuring range:30bpm~250bpm
Resolution:1bpm
Display: 2.8"segment LCD
Power: Four "AA" Batteries/5V or 6V Power adapter
Safety character:ClassⅡ Type BF
Physics speciality
Dimension: 130mm*110mm*80 mm
Weight: 300g (No Batteries)
Accessories
Cuff for adult
Digital Integrative SpO2 Probe (optional)
User manual
Software CD
USB data line
Power adapter(optional)
Software function
PC software is connect to the device by USB interface
Can download NIBP measure result of the terminal device
Can display trend graph,histogram, pie chart,etc.
Can edit every piece of NIBP data, and add annotation to it.
Can edit basic information,doctor's advice information, NIBP status instruction, current medicine-taken information, etc.
Support print preview,print the report.
CONTEC08C is a desktop Electronic Sphygmomanometer,with segment LCD. It can measure SpO2 and NIBP accurately,and display measure result with big font.The Electronic Sphygmomanometer can store the measure results of three users, and up to 99 items for every user. With review record data function, easy to use. It can be applied to the clinique,physical center and daily health care of family member.
Features
Fully automatic blood pressure measure.
Stores the measure results of three users, and up to 99 items for every user. Free to switch, easy to use.
Display measure data with big font digital LCD. NIBP data is clear at a glance.
When there are factors which affect the measure in the process of measure and the device can't get the measure result, the device can display the corresponding error message.
With the functions of time setting, blood pressure measure, user switching and data review. The operation is simple.
With short-time power storage function, when replacing the battery, the clock time function can't be affected.
Supply two kinds of NIBP measure unit: mmHg / kPa.According to habit to switch.
With SpO2 measure function(with optional SpO2 probe).
With function of automatic power-off. The device will be off automatically when there is no operation for a long time(more than 5 minutes ) or low power.
Communicate with PC, PC software can achieve data review, analysis measure results, seeing trend, printing reports and other functions.
Performance:
NIBP
Measure Method: Oscillometry
Measure Mode: The upper arm measure
Measure range: 0kPa(0mmHg)~ 38.67kPa(290mmHg)
Resolution: 0.133kPa(1mmHg)
Accuracy: ±0.4kPa(±3mmHg)
NIBP pulse rate measure range: 40~240bpm
Increasing pressure mode: force pump increases pressure automatically
Reducing pressure mode: self-motion ladder reducing pressure mode
SpO2(optional)
Measure range: 35%~100%
Accuracy:±2% ,70%~100%
SpO2 Probe Pulse Rate :
Measuring range:30bpm~250bpm
Resolution:1bpm
Display: 2.8"segment LCD
Power: Four "AA" Batteries/5V or 6V Power adapter
Safety character:ClassⅡ Type BF
Physics speciality
Dimension: 130mm*110mm*80 mm
Weight: 300g (No Batteries)
Accessories
Cuff for adult
Digital Integrative SpO2 Probe (optional)
User manual
Software CD
USB data line
Power adapter(optional)
Software function
PC software is connect to the device by USB interface
Can download NIBP measure result of the terminal device
Can display trend graph,histogram, pie chart,etc.
Can edit every piece of NIBP data, and add annotation to it.
Can edit basic information,doctor's advice information, NIBP status instruction, current medicine-taken information, etc.
Support print preview,print the report.
Product category: Blood pressure monitoring equipment
CONTEC08D Electronic Sphygmomanometer
Introduction
CONTEC08D is an Electronic Sphygmomanometer with LCD, features in concise interface and one-key operation, it can measure NIBP accurately, and NIBP records can be reviewed by the memory button. The device is widely used in family, clinic and physical-examination center for routine test.
Features
1)Small in volume, easy to operate, big font in displaying, simple and easy to understand the contents displayed.
2)Be applicable for adult.
3)Start measuring manually, record each measurement data, and store up to 99 groups of data.
4)Segment LCD. Automatic poweroff when there is no operation for a long time, achieves saving power.
5)Low battery and error information indication.
6)Optional units: mmHg and kPa
Performance
1) NIBP
Measurement method: Oscillometry
Measurement mode: upper-arm type
Measurement range: 0 kPa(0 mmHg) ~ 38.67 kPa(290 mmHg)
Resolution: 0.133 kPa(1 mmHg)
Accuracy: ±0.4 kPa(±3 mmHg)
PR measurement range: 40 bpm ~ 240 bpm
Inflation: automatic inflation by force pump
Deflation: automatic multistep deflation
2) Display: 2.4" segment LCD
3) Power: four "AA" batteries
4) Safety classification: internally powered equipment, type BF applied part
5) Waterproof grade: IP21
Accessories
1)Cuff for adult
2)User manual
3)Cuffs for other size(optional)
Physical characteristic
Dimension: 132 mm(L)×130 mm(W)×50 mm(H)
Weight: 425 g (including batteries)
Operation environment
Temperature: +5 ˚C~+40 ˚C
Relative humidity: 15 % ~ 85 %
Atmospheric pressure: 700 hPa ~ 1060 hPa
Storage environment:
Temperature: -20˚C ~ +55 ˚C
Relative humidity: ≤95 %
Atmospheric pressure: 700 hPa~1060 hPa
Optional configuration
No. Accessories name Model Purpose
1 Big size adult cuff IGN0008 NIBP measurement
CONTEC08D is an Electronic Sphygmomanometer with LCD, features in concise interface and one-key operation, it can measure NIBP accurately, and NIBP records can be reviewed by the memory button. The device is widely used in family, clinic and physical-examination center for routine test.
Features
1)Small in volume, easy to operate, big font in displaying, simple and easy to understand the contents displayed.
2)Be applicable for adult.
3)Start measuring manually, record each measurement data, and store up to 99 groups of data.
4)Segment LCD. Automatic poweroff when there is no operation for a long time, achieves saving power.
5)Low battery and error information indication.
6)Optional units: mmHg and kPa
Performance
1) NIBP
Measurement method: Oscillometry
Measurement mode: upper-arm type
Measurement range: 0 kPa(0 mmHg) ~ 38.67 kPa(290 mmHg)
Resolution: 0.133 kPa(1 mmHg)
Accuracy: ±0.4 kPa(±3 mmHg)
PR measurement range: 40 bpm ~ 240 bpm
Inflation: automatic inflation by force pump
Deflation: automatic multistep deflation
2) Display: 2.4" segment LCD
3) Power: four "AA" batteries
4) Safety classification: internally powered equipment, type BF applied part
5) Waterproof grade: IP21
Accessories
1)Cuff for adult
2)User manual
3)Cuffs for other size(optional)
Physical characteristic
Dimension: 132 mm(L)×130 mm(W)×50 mm(H)
Weight: 425 g (including batteries)
Operation environment
Temperature: +5 ˚C~+40 ˚C
Relative humidity: 15 % ~ 85 %
Atmospheric pressure: 700 hPa ~ 1060 hPa
Storage environment:
Temperature: -20˚C ~ +55 ˚C
Relative humidity: ≤95 %
Atmospheric pressure: 700 hPa~1060 hPa
Optional configuration
No. Accessories name Model Purpose
1 Big size adult cuff IGN0008 NIBP measurement
Product category: Blood pressure monitoring equipment
CONTEC08E Electronic Sphygmomanometer
Introduction
CONTEC08E is an Electronic Sphygmomanometer with color LCD, features in concise interface and one-key operation, it can measure NIBP and SpO2(optional) accurately, and NIBP records can be reviewed by the memory button. The device is widely used in family, clinic and physical-examination center for routine test.
Features
1)Small in volume, easy to operate, color LCD display, optional language interface(Chinese and English), strong in visibility.
2)Be applicable for adult.
3)Start measuring manually, record each measurement data, and store up to 99 groups of data.
4)NIBP measurement results, measurement date and time can be stored.
5)Three data review interfaces: “Data list”, “Trend chart” and “Big font”.
6)Low battery and error information indication.
7)Automatic poweroff when there is no operation for a long time, achieves saving power.
8)Optional units: mmHg and kPa
9)SpO2 measurement function(SpO2 probe is necessary).
Performance
1) NIBP
Measurement method: Oscillometry
Measurement mode: upper-arm type
Measurement range: 0 kPa(0 mmHg) ~ 38.67 kPa(290 mmHg)
Resolution: 0.133 kPa(1 mmHg)
Accuracy: ±0.4 kPa(±3 mmHg)
PR measurement range: 40 bpm ~ 240 bpm
Inflation: automatic inflation by force pump
Deflation: automatic multistep deflation
2) SpO2(optional)
Measurement range: 0 % ~ 100 %
Accuracy: 70 % ~ 100 %, ± 2 %
Pulse rate:
Measurement range: 30 bpm ~ 250 bpm
Resolution: 1 bpm
3) Display: 2.4" color LCD
4) Power: four "AA" batteries
5) Safety classification: internally powered equipment, type BF applied part
6) Waterproof grade: IP21
Accessories
1)Cuff for adult
2)User manual
3)SpO2 probe (optional)
4)Cuffs for other size(optional)
Physical characteristic
Dimension: 132 mm(L)×130 mm(W)×50 mm(H)
Weight: 405g (including batteries)
Operation environment
Temperature: +5 ˚C ~ +40 ˚C
Relative humidity: 15 % ~ 85 %
Atmospheric pressure: 700 hPa ~ 1060 hPa
Storage environment:
Temperature: -20 ˚C ~ +55 ˚C
Relative humidity: ≤95 %
Atmospheric pressure: 700 hPa ~ 1060 hPa
Optional configuration
No. Accessories name Model Purpose
1 Big size adult cuff IGN0008 NIBP measurement
2 SpO2 probe ESA0010 SpO2 measurement
CONTEC08E is an Electronic Sphygmomanometer with color LCD, features in concise interface and one-key operation, it can measure NIBP and SpO2(optional) accurately, and NIBP records can be reviewed by the memory button. The device is widely used in family, clinic and physical-examination center for routine test.
Features
1)Small in volume, easy to operate, color LCD display, optional language interface(Chinese and English), strong in visibility.
2)Be applicable for adult.
3)Start measuring manually, record each measurement data, and store up to 99 groups of data.
4)NIBP measurement results, measurement date and time can be stored.
5)Three data review interfaces: “Data list”, “Trend chart” and “Big font”.
6)Low battery and error information indication.
7)Automatic poweroff when there is no operation for a long time, achieves saving power.
8)Optional units: mmHg and kPa
9)SpO2 measurement function(SpO2 probe is necessary).
Performance
1) NIBP
Measurement method: Oscillometry
Measurement mode: upper-arm type
Measurement range: 0 kPa(0 mmHg) ~ 38.67 kPa(290 mmHg)
Resolution: 0.133 kPa(1 mmHg)
Accuracy: ±0.4 kPa(±3 mmHg)
PR measurement range: 40 bpm ~ 240 bpm
Inflation: automatic inflation by force pump
Deflation: automatic multistep deflation
2) SpO2(optional)
Measurement range: 0 % ~ 100 %
Accuracy: 70 % ~ 100 %, ± 2 %
Pulse rate:
Measurement range: 30 bpm ~ 250 bpm
Resolution: 1 bpm
3) Display: 2.4" color LCD
4) Power: four "AA" batteries
5) Safety classification: internally powered equipment, type BF applied part
6) Waterproof grade: IP21
Accessories
1)Cuff for adult
2)User manual
3)SpO2 probe (optional)
4)Cuffs for other size(optional)
Physical characteristic
Dimension: 132 mm(L)×130 mm(W)×50 mm(H)
Weight: 405g (including batteries)
Operation environment
Temperature: +5 ˚C ~ +40 ˚C
Relative humidity: 15 % ~ 85 %
Atmospheric pressure: 700 hPa ~ 1060 hPa
Storage environment:
Temperature: -20 ˚C ~ +55 ˚C
Relative humidity: ≤95 %
Atmospheric pressure: 700 hPa ~ 1060 hPa
Optional configuration
No. Accessories name Model Purpose
1 Big size adult cuff IGN0008 NIBP measurement
2 SpO2 probe ESA0010 SpO2 measurement
Product category: Blood pressure monitoring equipment, Wearable technologies, smart textiles
ABPM50 Ambulatory Blood Pressure Monitor
Introduction
ABPM50 is a handhold ambulatory blood pressure monitor, which is designed according to oscillography theory. The device could monitor human body blood pressure up to 24 hours continuously and dynamically, providing accurate basis for the diagnosis. It is applicable for using in hospital, clinic and other medical institutions.
Features
Product features:
1)Compact and portable, user-friend interface, easy to use
2)Patient range: adult, pediatric, neonate
3)24 hours ambulatory NIBP monitoring function, up to 350 groups of ambulatory NIBP data can be recorded for once.
4)Perfect combination of automatic and manual measurement method, up to 300 groups of data can be recorded for once by manual measure.
5)High-definition color TFT display, strong visibility
6)By data review interface such as "data list","trend graph","big font", NIBP data is clear at a glance
7)Display of low power prompt, alarm, error message and time
8)Supply two kinds of unit: mmHg / kPa
9)Display interface can be switched between Chinese and English
10)Parameter alarm dispose function is optional
11)Communicate with PC, PC software can achieve data review, measured results analysis, view of trend graph, reports printing and other functions
Software features:
1）Connect to the device by USB interface.
2）Download NIBP measure result from the terminal device.
3）Display of scoop-shape trend graph, filling-type trend graph, histogram, pie chart, correlation line graph.
4）Edit every piece of NIBP data, and add annotation to it.
5）Edit basic information, doctor's advice, NIBP status instruction, current medicine-taken information, etc.
6）Support report printing and print preview.
Performance
NIBP:
Measure Method: Oscillometry
Measure Mode: The upper arm measure
Automatic Measure Interval: 15, 20, 30, 40, 60, 90, 120, 180, 240 minutes
Measure range: Pressure:0kPa (0mmHg)~38.67kPa (290mmHg)
Resolution: 1mmHg
Accuracy: ±3mmHg
Prompt parameter: SYS, DIA
Inflation: automatic inflation by force pump
Deflation: automatic multistep deflation
PR:
Measure range: 40bpm～240bpm
Resolution:1bpm
Safety:
Power supply: DC 3V (2×1.5V AA alkaline dry battery)
Safety type: internally powered device, type BF applied part with defibrillation protection
Accessories
Cuff for adult 1pc
CD (PC software) 1pc
User manual 1pc
USB data line 1pc
Pack 1pc
Physical characteristic
Dimension: 128mm(L) ×69mm(W) × 36mm(H) (without packaging)
Weight: <300 g (with battery)
Operational environment
Temperature: 5 ˚C～40 ˚C
Relative humidity: 15%～85%
Atmospheric pressure: 700hPa～1060hPa
Specific EMC, climate, mechanical environment: Do not use a mobile phone in the vicinity of the device, for the strong radiation field produced by mobile phone would interfere with the normal function of use.
Storage environment:
Temperature: -20˚C ~ +55 ˚C
Relative humidity: ≤95 %
Specific EMC, climate, mechanical environment: The device after packaged should be stored in a environment of -20℃～+55℃, relative humidity no more than 95%, and well-ventilated room with no corrosive gas. Strong shock, vibration and snow and rain should be avoided during transportation.
ABPM50 is a handhold ambulatory blood pressure monitor, which is designed according to oscillography theory. The device could monitor human body blood pressure up to 24 hours continuously and dynamically, providing accurate basis for the diagnosis. It is applicable for using in hospital, clinic and other medical institutions.
Features
Product features:
1)Compact and portable, user-friend interface, easy to use
2)Patient range: adult, pediatric, neonate
3)24 hours ambulatory NIBP monitoring function, up to 350 groups of ambulatory NIBP data can be recorded for once.
4)Perfect combination of automatic and manual measurement method, up to 300 groups of data can be recorded for once by manual measure.
5)High-definition color TFT display, strong visibility
6)By data review interface such as "data list","trend graph","big font", NIBP data is clear at a glance
7)Display of low power prompt, alarm, error message and time
8)Supply two kinds of unit: mmHg / kPa
9)Display interface can be switched between Chinese and English
10)Parameter alarm dispose function is optional
11)Communicate with PC, PC software can achieve data review, measured results analysis, view of trend graph, reports printing and other functions
Software features:
1）Connect to the device by USB interface.
2）Download NIBP measure result from the terminal device.
3）Display of scoop-shape trend graph, filling-type trend graph, histogram, pie chart, correlation line graph.
4）Edit every piece of NIBP data, and add annotation to it.
5）Edit basic information, doctor's advice, NIBP status instruction, current medicine-taken information, etc.
6）Support report printing and print preview.
Performance
NIBP:
Measure Method: Oscillometry
Measure Mode: The upper arm measure
Automatic Measure Interval: 15, 20, 30, 40, 60, 90, 120, 180, 240 minutes
Measure range: Pressure:0kPa (0mmHg)~38.67kPa (290mmHg)
Resolution: 1mmHg
Accuracy: ±3mmHg
Prompt parameter: SYS, DIA
Inflation: automatic inflation by force pump
Deflation: automatic multistep deflation
PR:
Measure range: 40bpm～240bpm
Resolution:1bpm
Safety:
Power supply: DC 3V (2×1.5V AA alkaline dry battery)
Safety type: internally powered device, type BF applied part with defibrillation protection
Accessories
Cuff for adult 1pc
CD (PC software) 1pc
User manual 1pc
USB data line 1pc
Pack 1pc
Physical characteristic
Dimension: 128mm(L) ×69mm(W) × 36mm(H) (without packaging)
Weight: <300 g (with battery)
Operational environment
Temperature: 5 ˚C～40 ˚C
Relative humidity: 15%～85%
Atmospheric pressure: 700hPa～1060hPa
Specific EMC, climate, mechanical environment: Do not use a mobile phone in the vicinity of the device, for the strong radiation field produced by mobile phone would interfere with the normal function of use.
Storage environment:
Temperature: -20˚C ~ +55 ˚C
Relative humidity: ≤95 %
Specific EMC, climate, mechanical environment: The device after packaged should be stored in a environment of -20℃～+55℃, relative humidity no more than 95%, and well-ventilated room with no corrosive gas. Strong shock, vibration and snow and rain should be avoided during transportation.
Product category: Blood pressure monitoring equipment, Patient monitoring systems, Wearable technologies, smart textiles
PM50 Patient Monitor
Introduction
PM50 is a multi-functional patient monitor that can monitor BP and SpO2 at the same time. Realizing long time monitoring of dynamic blood pressure, the device is widely applicable to hospital wards, community clinics and other medical institutions.
Functions
Features:
1)Compact and portable, easy to use.
2)With Integrative SpO2 Probe.
3)Double working modes,monitoring function and 24 hours ambulatory NIBP measurement function can be flexibly set.
4)Long time monitoring BP and SpO2, displaying value of BP, SpO2 and PR.
5)NIBP and SpO2 data Record for large capacity.
6)With friendly user interface, the user can see list menu and review measurement results.
7)The device can display low power information, alarm information, error information and time information richly.
8)Parameter alarms function is optional.
9)Patient information can be flexibly set.
10)Case management function.PC software can achieve data review, analysis measurement results, seeing trend, printing reports and other functions.
11)Data can be transmitted between device and computer, such as upload patient information, download measurement data.
12)English and Chinese menu.
Function of master device software:
1）Set patient information through PC software.
2）Up to 1000 patients cases can be edited and supervised.
3）The time segment of dealing with the patient’s NIBP data is 48 hours.
4）Connect the device by USB interface.
5）Can upload patient information data collection project and download collection data.
6）Can display scoop-shape trend graph,filling-type trend graph, histogram, pie chart, correlation line graph.
7）Can edit every piece of data, and add annotation to it.
8）Can edit basic information,doctor's advice information, NIBP and SpO2 status instruction, current medicine-taken information, etc.
9）Support print preview,print the report.
Performance
NIBP：
Measurement Method: Oscillometry
Measurement Mode: The upper arm measure
Measuring range:
SYS 40mmHg～270mmHg
MAP 20mmHg～235mmHg
DIA 10mmHg～215mmHg
Automatic Measurement Interval: 5.10.15.20.30.45.60.90.120 minutes
Resolution: 1mmHg
Accuracy: ±3mmHg
Increasing pressure mode: force pump increases pressure automatically
Reducing pressure mode: self-motion ladder reducing pressure mode
Alarm parameter: SYS / DIA
SpO2:
Measuring range: 0%～100%
Resolution:1%
Accuracy: 70-100%, ±2%, below 70% unspecified
Error in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).
Resistance to surrounding light:The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
Pulse Rate:
Measuring range:30bpm~250bpm
Resolution:1bpm
Accuracy: ±2 bpm or ±2% (select larger)
Display:
2.4" TFT colour LCD
Safety:
Power: DC 3V（Two "AA",1.5V Alkali Battery）
Product safety type:Type BF application part (Internally powered,defibrillator protected)
Accessories
cuff for adult
Integrative SpO2 Probe
USB data line
Disk (PC software)
Pouch
User manual
Physical characteristic
Dimension: 128*69*36 mm (No including Packing)
Weight: <350g (Including Batteries)
Working environment:
Temperature：5 ˚C～40 ˚C
Relative humidity：≤80%
Altitude：-500 to 4,600m (-1,600 to 15,000ft)
Specific EMC, climate, mechanical environment: Do not use a mobile phone in the vicinity of the patient monitor for the strong radiation field produced by mobile phone would interfere with the normal function of the patient monitor use.
Storage environment:
Temperature： -20˚C ~ 60 ˚C
Relative humidity： ≤95 %
Altitude：-500 to 13,100m (-1,600 to 43,000ft)
Specific EMC, climate, mechanical environment: The patient monitor after packaged should be stored in a well-ventilated room with no corrosive gas. Strong shock, vibration and snow and rain should be avoided during transportation.
PM50 is a multi-functional patient monitor that can monitor BP and SpO2 at the same time. Realizing long time monitoring of dynamic blood pressure, the device is widely applicable to hospital wards, community clinics and other medical institutions.
Functions
Features:
1)Compact and portable, easy to use.
2)With Integrative SpO2 Probe.
3)Double working modes,monitoring function and 24 hours ambulatory NIBP measurement function can be flexibly set.
4)Long time monitoring BP and SpO2, displaying value of BP, SpO2 and PR.
5)NIBP and SpO2 data Record for large capacity.
6)With friendly user interface, the user can see list menu and review measurement results.
7)The device can display low power information, alarm information, error information and time information richly.
8)Parameter alarms function is optional.
9)Patient information can be flexibly set.
10)Case management function.PC software can achieve data review, analysis measurement results, seeing trend, printing reports and other functions.
11)Data can be transmitted between device and computer, such as upload patient information, download measurement data.
12)English and Chinese menu.
Function of master device software:
1）Set patient information through PC software.
2）Up to 1000 patients cases can be edited and supervised.
3）The time segment of dealing with the patient’s NIBP data is 48 hours.
4）Connect the device by USB interface.
5）Can upload patient information data collection project and download collection data.
6）Can display scoop-shape trend graph,filling-type trend graph, histogram, pie chart, correlation line graph.
7）Can edit every piece of data, and add annotation to it.
8）Can edit basic information,doctor's advice information, NIBP and SpO2 status instruction, current medicine-taken information, etc.
9）Support print preview,print the report.
Performance
NIBP：
Measurement Method: Oscillometry
Measurement Mode: The upper arm measure
Measuring range:
SYS 40mmHg～270mmHg
MAP 20mmHg～235mmHg
DIA 10mmHg～215mmHg
Automatic Measurement Interval: 5.10.15.20.30.45.60.90.120 minutes
Resolution: 1mmHg
Accuracy: ±3mmHg
Increasing pressure mode: force pump increases pressure automatically
Reducing pressure mode: self-motion ladder reducing pressure mode
Alarm parameter: SYS / DIA
SpO2:
Measuring range: 0%～100%
Resolution:1%
Accuracy: 70-100%, ±2%, below 70% unspecified
Error in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).
Resistance to surrounding light:The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
Pulse Rate:
Measuring range:30bpm~250bpm
Resolution:1bpm
Accuracy: ±2 bpm or ±2% (select larger)
Display:
2.4" TFT colour LCD
Safety:
Power: DC 3V（Two "AA",1.5V Alkali Battery）
Product safety type:Type BF application part (Internally powered,defibrillator protected)
Accessories
cuff for adult
Integrative SpO2 Probe
USB data line
Disk (PC software)
Pouch
User manual
Physical characteristic
Dimension: 128*69*36 mm (No including Packing)
Weight: <350g (Including Batteries)
Working environment:
Temperature：5 ˚C～40 ˚C
Relative humidity：≤80%
Altitude：-500 to 4,600m (-1,600 to 15,000ft)
Specific EMC, climate, mechanical environment: Do not use a mobile phone in the vicinity of the patient monitor for the strong radiation field produced by mobile phone would interfere with the normal function of the patient monitor use.
Storage environment:
Temperature： -20˚C ~ 60 ˚C
Relative humidity： ≤95 %
Altitude：-500 to 13,100m (-1,600 to 43,000ft)
Specific EMC, climate, mechanical environment: The patient monitor after packaged should be stored in a well-ventilated room with no corrosive gas. Strong shock, vibration and snow and rain should be avoided during transportation.
Product category: Instruments and apparatus for cardiac and thoracic surgery, Inhaler and aerosol appliances
OC5B(Nebulization function) Oxygen Concentrator
Introduction
OC5B Oxygen Concentrator consisted of air compressor, adsorption tower of molecular sieve, sensor and flow meter. With the molecular sieve to be absorbent, the machine adopts PSA(pressure swing absorbers ) method to directly concentrate medical oxygen with high concentration from the air.
It is small and portable. The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with requirements of medical device. The machine can also realizes the measurement and display of SpO2 and pulse rate, medication atomization by connecting accessories.
The machine has a wide application, including family, clinic, hospital, oxygen bar, plateau outpost, gym center, etc.
Function
1)With working indicator
2)Built-in filters to pure the gas
3)Oxygen concentration status indicator
4)Function of accumulating time
5)Function of timing shutdown
6)Alarm for power failure
7)Alarm for high/low pressure protection
8)Alarm for low flowrate
9)Alarm for high temperature
10)Measure SpO2 and pulse rate
11)Function of nebulization
Performance
Maximum flowrate recommended: 5L/min
Oxygen Output Concentration Levels: (reach the stated oxygen concentration level within 30 minutes after turning on the machine): 93%±3% at the flowrate of 0.5~5L/min
Flowrate range: 0.5~5L/min
Flowrate change at maximum recommended flowrate with 7 kPa back pressure: <0.5L/min.
Outlet pressure: 20kPa~50kPa
Input Power Consumption: 400VA
Electrical Requirements: AC220V±10%, 50Hz±1Hz
Operating noise: ≤55dB(A)
SpO2 Measurement
1)Range: 0%~100%
2)Resolution: 1%
3)Accuracy: ±2% when SpO2 is in range of 70%~100%; unspecified when less than 70% .
Pulse rate Measurement
1)Range: 30bpm～250bpm
2)Resolution: 1bpm
3)Accuracy: ±2bpm or ±2％, whichever is greater
Safety characteristics
1) Type of protection against electroshock: class Ⅱ equipment
2) Degree of protection against electroshock: Type BF applied part
3) Degree of protection against ingress of water: IP21
Accessories
Humidifier bottle
User manual
Power cord
Nasal cannula
SpO2 probe
Atomization accessories
Physical characteristic
Dimension: 508(L) × 260(W) × 530(H)mm
Weigh: 21Kg
Operating Environment:
a) Temperature: 10℃~40℃
b) Relative humidity: ≤80%
c) Atmospheric pressure: 860hPa~1060hPa
Optional configuration
None.
Certificate
None.
OC5B Oxygen Concentrator consisted of air compressor, adsorption tower of molecular sieve, sensor and flow meter. With the molecular sieve to be absorbent, the machine adopts PSA(pressure swing absorbers ) method to directly concentrate medical oxygen with high concentration from the air.
It is small and portable. The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with requirements of medical device. The machine can also realizes the measurement and display of SpO2 and pulse rate, medication atomization by connecting accessories.
The machine has a wide application, including family, clinic, hospital, oxygen bar, plateau outpost, gym center, etc.
Function
1)With working indicator
2)Built-in filters to pure the gas
3)Oxygen concentration status indicator
4)Function of accumulating time
5)Function of timing shutdown
6)Alarm for power failure
7)Alarm for high/low pressure protection
8)Alarm for low flowrate
9)Alarm for high temperature
10)Measure SpO2 and pulse rate
11)Function of nebulization
Performance
Maximum flowrate recommended: 5L/min
Oxygen Output Concentration Levels: (reach the stated oxygen concentration level within 30 minutes after turning on the machine): 93%±3% at the flowrate of 0.5~5L/min
Flowrate range: 0.5~5L/min
Flowrate change at maximum recommended flowrate with 7 kPa back pressure: <0.5L/min.
Outlet pressure: 20kPa~50kPa
Input Power Consumption: 400VA
Electrical Requirements: AC220V±10%, 50Hz±1Hz
Operating noise: ≤55dB(A)
SpO2 Measurement
1)Range: 0%~100%
2)Resolution: 1%
3)Accuracy: ±2% when SpO2 is in range of 70%~100%; unspecified when less than 70% .
Pulse rate Measurement
1)Range: 30bpm～250bpm
2)Resolution: 1bpm
3)Accuracy: ±2bpm or ±2％, whichever is greater
Safety characteristics
1) Type of protection against electroshock: class Ⅱ equipment
2) Degree of protection against electroshock: Type BF applied part
3) Degree of protection against ingress of water: IP21
Accessories
Humidifier bottle
User manual
Power cord
Nasal cannula
SpO2 probe
Atomization accessories
Physical characteristic
Dimension: 508(L) × 260(W) × 530(H)mm
Weigh: 21Kg
Operating Environment:
a) Temperature: 10℃~40℃
b) Relative humidity: ≤80%
c) Atmospheric pressure: 860hPa~1060hPa
Optional configuration
None.
Certificate
None.
Product category: Ultrasound diagnostic equipment
sonoline C2 pocket fetal doppler
Introduction
Sonoline C2 Pocket Fetal Doppler is a hand-held fetal heart rate detecting device. It can be used in hospital and clinic for daily self-check by pregnant woman. The device uses color LCD of high resolution to display the fetal heartbeat waveform, integrated the function of time display and menu control, FHR calculation, memory and review of FHR data, heartbeat waveform and heartbeat sound. It can communicate with PC, transfer the data to PC software to display and print the heart rate trend graph, which can help the doctor diagnose and manage the case in time.
Function
Delicate and compact design, portable and easy to use
Crooked probe structure, which is easy to operate and increases the feeling of comfort, embodies the humanized design.
Three working mode: Real-time FHR Display Mode, Averaged FHR Display Mode and Manual Mode
Chinese and English display and switch, clock display
FHR values, bar graph and heartbeat waveform color display
Alarming in red when the FHR value is out of the normal range.
Memory and review function
PC operation: view stored heart rate trend graph, cases management
Automatic shutdown: The device will automatically turn off if there is no signal within 1 minute.
Two 1.5V batteries (AA LR6) can last more than 8 hours for normal use
Sonoline C2 Pocket Fetal Doppler is a hand-held fetal heart rate detecting device. It can be used in hospital and clinic for daily self-check by pregnant woman. The device uses color LCD of high resolution to display the fetal heartbeat waveform, integrated the function of time display and menu control, FHR calculation, memory and review of FHR data, heartbeat waveform and heartbeat sound. It can communicate with PC, transfer the data to PC software to display and print the heart rate trend graph, which can help the doctor diagnose and manage the case in time.
Function
Delicate and compact design, portable and easy to use
Crooked probe structure, which is easy to operate and increases the feeling of comfort, embodies the humanized design.
Three working mode: Real-time FHR Display Mode, Averaged FHR Display Mode and Manual Mode
Chinese and English display and switch, clock display
FHR values, bar graph and heartbeat waveform color display
Alarming in red when the FHR value is out of the normal range.
Memory and review function
PC operation: view stored heart rate trend graph, cases management
Automatic shutdown: The device will automatically turn off if there is no signal within 1 minute.
Two 1.5V batteries (AA LR6) can last more than 8 hours for normal use
Product category: Ultrasound diagnostic equipment
Baby Sound D pocket fetal doppler
Introduction
Baby Sound D Pocket Fetal Doppler adopts Doppler technology in designing, it is a hand-held fetal heart rate detection device. Measured FHR value and waveform are displayed on the LCD screen. With easy and convenient operation, it can be used in hospital, clinic for daily self-check by pregnant woman, realizing early monitoring and care for life.
Function
Beautiful appearance, easy to operate
Magnetic probe, compact design, convenient to use
Color display screen
Digits/Curve display
Battery level indication
Auto shutdown after no signal inputting for 60s
High sensitive Doppler probe, fetal heart sound can be heard clearly for pregnancy more than 12 weeks
Two sound output modes: built-in speaker and external headphone
Baby Sound D Pocket Fetal Doppler adopts Doppler technology in designing, it is a hand-held fetal heart rate detection device. Measured FHR value and waveform are displayed on the LCD screen. With easy and convenient operation, it can be used in hospital, clinic for daily self-check by pregnant woman, realizing early monitoring and care for life.
Function
Beautiful appearance, easy to operate
Magnetic probe, compact design, convenient to use
Color display screen
Digits/Curve display
Battery level indication
Auto shutdown after no signal inputting for 60s
High sensitive Doppler probe, fetal heart sound can be heard clearly for pregnancy more than 12 weeks
Two sound output modes: built-in speaker and external headphone
Product category: Ultrasound diagnostic equipment
baby sound E pocket fetal doppler
Introduction
Baby Sound E Pocket Fetal Doppler adopts Doppler technology in designing, it is a hand-held fetal heart rate detection device. Measured FHR value and waveform are displayed on the LCD screen. With easy and convenient operation, it can be used in hospital, clinic for daily self-check by pregnant woman, realizing early monitoring and care for life.
Function
Beautiful appearance, easy to operate
Magnetic probe, compact design, convenient to use
Color display screen
Digits/Curve display
Battery level indication
Auto shutdown after no signal inputting for 60s
High sensitive Doppler probe, fetal heart sound can be heard clearly for pregnancy more than 12 weeks
Two sound output modes: built-in speaker and external headphone
Baby Sound E Pocket Fetal Doppler adopts Doppler technology in designing, it is a hand-held fetal heart rate detection device. Measured FHR value and waveform are displayed on the LCD screen. With easy and convenient operation, it can be used in hospital, clinic for daily self-check by pregnant woman, realizing early monitoring and care for life.
Function
Beautiful appearance, easy to operate
Magnetic probe, compact design, convenient to use
Color display screen
Digits/Curve display
Battery level indication
Auto shutdown after no signal inputting for 60s
High sensitive Doppler probe, fetal heart sound can be heard clearly for pregnancy more than 12 weeks
Two sound output modes: built-in speaker and external headphone
Product category: Respiration equipment, oxygen equipment
MS100 SpO2 Simulator
Brief Introduction
MS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests for the oximeter by simulation means, and gives cognizance of veracity about the oximeter.
Because the oximeter manufacturer may use different R-curves, some R-curves used abroad currently have been embedded.
Features
◆ Separated connection between simulator probe and host, operation and test are more convenient.
◆ 262K color and 320*240 TFT, adjustable brightness level.
◆ Film key-press, makes the operation more comfortable.
◆ Power with chargeable lithium battery, can display the charge information of battery.
◆ Key volume, can open or close.
Main Functions
◆ Oxygen saturation simulation;
◆ Pulse rate simulation;
◆ Patient state simulation preset;
◆ Can test the reaction time of device;
◆ Can simulate the SpO2 and pulse rate under different amplitude;
◆ Can test the performance of device under different interference source;
◆ Can select different R-curve.
Main Parameters
◆ SpO2
Measuring range: 35%~100%
Resolution:1%
Error: When SpO2 is 75%~100%, the error is the larger between ±2% and ±P(P denotes the precision of the tested oximeter); when SpO2 is 74%~50%, the error is the larger between ±2% and ±P; no define when SpO2 is less than 50%.
◆ Pulse rate
Measuring range:25bpm~250bpm
Resolution:5bpm
Error:1%±1bpm
◆ Amplitude
Measuring range:0.000%~20.000%
Resolution:1% for 1.000%~20.000%; 0.1% for 0.100%~0.900%; 0.025% for 0.000%~0.075%.
◆ Patient state
24 conditions presetting and 8 conditions as default after start. The number of condition can be adjusted by Motion level setup.
◆ Voltage
DC 3.6V~4.2V
◆ Power Supply
Voltage 3.7 rechargeable lithium battery × 1
◆ Battery working life
Charge and discharge no less than 500 times.
Accessaries
◆ A MS100 user manual
◆ A 5.0V adaptor
MS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests for the oximeter by simulation means, and gives cognizance of veracity about the oximeter.
Because the oximeter manufacturer may use different R-curves, some R-curves used abroad currently have been embedded.
Features
◆ Separated connection between simulator probe and host, operation and test are more convenient.
◆ 262K color and 320*240 TFT, adjustable brightness level.
◆ Film key-press, makes the operation more comfortable.
◆ Power with chargeable lithium battery, can display the charge information of battery.
◆ Key volume, can open or close.
Main Functions
◆ Oxygen saturation simulation;
◆ Pulse rate simulation;
◆ Patient state simulation preset;
◆ Can test the reaction time of device;
◆ Can simulate the SpO2 and pulse rate under different amplitude;
◆ Can test the performance of device under different interference source;
◆ Can select different R-curve.
Main Parameters
◆ SpO2
Measuring range: 35%~100%
Resolution:1%
Error: When SpO2 is 75%~100%, the error is the larger between ±2% and ±P(P denotes the precision of the tested oximeter); when SpO2 is 74%~50%, the error is the larger between ±2% and ±P; no define when SpO2 is less than 50%.
◆ Pulse rate
Measuring range:25bpm~250bpm
Resolution:5bpm
Error:1%±1bpm
◆ Amplitude
Measuring range:0.000%~20.000%
Resolution:1% for 1.000%~20.000%; 0.1% for 0.100%~0.900%; 0.025% for 0.000%~0.075%.
◆ Patient state
24 conditions presetting and 8 conditions as default after start. The number of condition can be adjusted by Motion level setup.
◆ Voltage
DC 3.6V~4.2V
◆ Power Supply
Voltage 3.7 rechargeable lithium battery × 1
◆ Battery working life
Charge and discharge no less than 500 times.
Accessaries
◆ A MS100 user manual
◆ A 5.0V adaptor
Product category: Blood pressure monitoring equipment
MS200 NIBP Simulator
Product overview
MS200 NIBP Simulator is a multi-purpose test instrument for use with oscillometric Non-Invasive Blood Pressure(NIBP) Monitors. The appearance is concision ,operation is simple and convenient,with its internal pump, the Simulator can generate pressures up to 400 mmHg (53.3 kPa).The Simulator provides dynamic blood pressure simulations, static pressure calibration, automated leak testing, and pressure relief valve testing.You can quickly and exact analyse different NIBP Monitors.
Main features
Provides pressure gauge testing,pressure leak testing,relief valve testing functions .
Build-in pump provides pressure source with leak and pressure relief tests
NIBP simulations for both arm and wrist cuffs.
Provides adult,neonate, eight variations patients conditions,user-defined simulations.
Provides arrhythmias,respiratory artifact simulations.
Built-in air chamber to simulate adult and neonate cuff.
65k colors,4.3" LCD display.
Technical index
Pressure measurement
Units:mmHg,kPa,cmH2O,inH2O,psi
Range:0mmHg-400mmHg
Resolution:1 mmHg,0.1 kPa,1 cmH2O,1 inH2O,0.1 psi
Accuracy:0-300 mmHg:±0.5% of reading ±1 mmHg;
301-400 mmHg:±2%of reading
Pressure Generator
Static Pressure Range:50 mmHg-400 mmHg
Resolution:1mmHg
Difference between target pressure and actual pressure :±10 mmHg from 100-400 mmHg with a minimum volume of 300 cc
Internal leak rate
<2 mmHg per minute, with a minimum volume of 300 cc
Pressure Leak Test
Pressure generate up to 400 mmHg (53.3 kPa) with internal pump.The screen always show the peak pressures and the real-time pressures.Leak rate displayed after 10 seconds.
Pressure Relief Test
Pressure generate up to 400 mmHg (53.3 kPa) with internal pump,Displays peak pressure.
Standard BP Simulations
Preset blood pressure:
1#: BP: 120/80(93) HR: 80 Pulse Volume: 0.68
2#: BP: 150/100(116) HR: 80 Pulse Volume: 0.65
3#: BP: 200/150(166) HR: 80 Pulse Volume: 0.60
4#: BP: 255/195(215) HR: 80 Pulse Volume: 0.55
5#: BP: 60/30(40) HR: 80 Pulse Volume: 0.75
6#: BP: 80/50(60) HR: 80 Pulse Volume: 0.71
7#: BP: 100/65(76) HR: 80 Pulse Volume: 0.69
Patient Conditions
BP Simulations
Healthy: BP: 120/80(93) HR:75 Pulse Volume: 0.68
Weak Pulse: BP: 110/80(90) HR:95 Pulse Volume: 0.50
Mild Exercise: BP: 140/90(106) HR:120 Pulse Volume: 1.00
Strenuous Exer: BP: 140/90(106) HR:162 Pulse Volume: 1.40
Obese: BP: 120/80(93) HR:90 Pulse Volume: 0.50
Geriatric: BP: 150/110(123) HR:95 Pulse Volume: 0.40
Tachycardia: BP: 120/105(110) HR:130 Pulse Volume: 0.40
Bradycardia: BP: 120/60(80) HR:45 Pulse Volume: 1.10
Arrhythmia Simulations
Premature Atrial Contract 1,Premature Atrial Contract 2,Premature Ventricular Contract,Atrial Fib and PVCs
Respiratory Artifacts
Spontaneous Breathing 1,Spontaneous Breathing 2,Spontaneous Breathing 3,Controlled Ventilation
Neonate simulations
User can select External or Internal Neonate;
1#: BP: 35/15 HR: 120bpm Pulse Volume: 0.11
2#: BP: 60/30 HR: 120bpm Pulse Volume: 0.10
3#: BP: 80/50 HR: 120bpm Pulse Volume: 0.10
4#: BP: 100/70 HR: 120bpm Pulse Volume: 0.10
Wrist simulations
1#: BP:120/80(93) HR: 80bpm Pulse Volume: 0.50
2#: BP:160/100(120) HR: 80bpm Pulse Volume: 0.50
3#: BP:80/55(63) HR: 80bpm Pulse Volume: 0.50
User-Defined simulations
Allows the operator to define blood pressure simulations.
Systolic(mmHg) 20-250
Diastolic(mmHg) 10-200
Heart Rate,(bpm) 30-250
Pulse Volume,(cc) 0.1-2.4
Simulant characteristics
The maximum pulse volume:2.4cc
The maximum heart rate:250bpm,200bpm at pulse volume>2.00cc.
Internal Adult cuff volume:20cc
Internal neonate cuff volume:300cc
Blood pressure units: mmHg,kPa
Heart Rate Accuracy:±1BPM
Patient Conditions:
Weak pulse, Tachycardia,Obese,Geriatric ±1%±1BPM
Mild exercise±1.5%±1BPM
Strenuous exercise±3%±1BPM
Display
65k colors 4.3 inch TFT Display, brightness can be changed.
Power
AC100 - 240 V 50/60 Hz, 60 VA
Environmental Conditions
Working temperature: 15℃ to 40℃(59℉ to 104℉)
Storage temperature: -20℃ to +65℃(-4℉ to +149℉)
Relative humidity: < 90%,No condensation.
Size (L x W x H)
27 cm x 26.5 cm x 13.2 cm
Weight
About 4kg
Accessories:
Power cord
Fuse
User 's Manual
MS200 NIBP Simulator is a multi-purpose test instrument for use with oscillometric Non-Invasive Blood Pressure(NIBP) Monitors. The appearance is concision ,operation is simple and convenient,with its internal pump, the Simulator can generate pressures up to 400 mmHg (53.3 kPa).The Simulator provides dynamic blood pressure simulations, static pressure calibration, automated leak testing, and pressure relief valve testing.You can quickly and exact analyse different NIBP Monitors.
Main features
Provides pressure gauge testing,pressure leak testing,relief valve testing functions .
Build-in pump provides pressure source with leak and pressure relief tests
NIBP simulations for both arm and wrist cuffs.
Provides adult,neonate, eight variations patients conditions,user-defined simulations.
Provides arrhythmias,respiratory artifact simulations.
Built-in air chamber to simulate adult and neonate cuff.
65k colors,4.3" LCD display.
Technical index
Pressure measurement
Units:mmHg,kPa,cmH2O,inH2O,psi
Range:0mmHg-400mmHg
Resolution:1 mmHg,0.1 kPa,1 cmH2O,1 inH2O,0.1 psi
Accuracy:0-300 mmHg:±0.5% of reading ±1 mmHg;
301-400 mmHg:±2%of reading
Pressure Generator
Static Pressure Range:50 mmHg-400 mmHg
Resolution:1mmHg
Difference between target pressure and actual pressure :±10 mmHg from 100-400 mmHg with a minimum volume of 300 cc
Internal leak rate
<2 mmHg per minute, with a minimum volume of 300 cc
Pressure Leak Test
Pressure generate up to 400 mmHg (53.3 kPa) with internal pump.The screen always show the peak pressures and the real-time pressures.Leak rate displayed after 10 seconds.
Pressure Relief Test
Pressure generate up to 400 mmHg (53.3 kPa) with internal pump,Displays peak pressure.
Standard BP Simulations
Preset blood pressure:
1#: BP: 120/80(93) HR: 80 Pulse Volume: 0.68
2#: BP: 150/100(116) HR: 80 Pulse Volume: 0.65
3#: BP: 200/150(166) HR: 80 Pulse Volume: 0.60
4#: BP: 255/195(215) HR: 80 Pulse Volume: 0.55
5#: BP: 60/30(40) HR: 80 Pulse Volume: 0.75
6#: BP: 80/50(60) HR: 80 Pulse Volume: 0.71
7#: BP: 100/65(76) HR: 80 Pulse Volume: 0.69
Patient Conditions
BP Simulations
Healthy: BP: 120/80(93) HR:75 Pulse Volume: 0.68
Weak Pulse: BP: 110/80(90) HR:95 Pulse Volume: 0.50
Mild Exercise: BP: 140/90(106) HR:120 Pulse Volume: 1.00
Strenuous Exer: BP: 140/90(106) HR:162 Pulse Volume: 1.40
Obese: BP: 120/80(93) HR:90 Pulse Volume: 0.50
Geriatric: BP: 150/110(123) HR:95 Pulse Volume: 0.40
Tachycardia: BP: 120/105(110) HR:130 Pulse Volume: 0.40
Bradycardia: BP: 120/60(80) HR:45 Pulse Volume: 1.10
Arrhythmia Simulations
Premature Atrial Contract 1,Premature Atrial Contract 2,Premature Ventricular Contract,Atrial Fib and PVCs
Respiratory Artifacts
Spontaneous Breathing 1,Spontaneous Breathing 2,Spontaneous Breathing 3,Controlled Ventilation
Neonate simulations
User can select External or Internal Neonate;
1#: BP: 35/15 HR: 120bpm Pulse Volume: 0.11
2#: BP: 60/30 HR: 120bpm Pulse Volume: 0.10
3#: BP: 80/50 HR: 120bpm Pulse Volume: 0.10
4#: BP: 100/70 HR: 120bpm Pulse Volume: 0.10
Wrist simulations
1#: BP:120/80(93) HR: 80bpm Pulse Volume: 0.50
2#: BP:160/100(120) HR: 80bpm Pulse Volume: 0.50
3#: BP:80/55(63) HR: 80bpm Pulse Volume: 0.50
User-Defined simulations
Allows the operator to define blood pressure simulations.
Systolic(mmHg) 20-250
Diastolic(mmHg) 10-200
Heart Rate,(bpm) 30-250
Pulse Volume,(cc) 0.1-2.4
Simulant characteristics
The maximum pulse volume:2.4cc
The maximum heart rate:250bpm,200bpm at pulse volume>2.00cc.
Internal Adult cuff volume:20cc
Internal neonate cuff volume:300cc
Blood pressure units: mmHg,kPa
Heart Rate Accuracy:±1BPM
Patient Conditions:
Weak pulse, Tachycardia,Obese,Geriatric ±1%±1BPM
Mild exercise±1.5%±1BPM
Strenuous exercise±3%±1BPM
Display
65k colors 4.3 inch TFT Display, brightness can be changed.
Power
AC100 - 240 V 50/60 Hz, 60 VA
Environmental Conditions
Working temperature: 15℃ to 40℃(59℉ to 104℉)
Storage temperature: -20℃ to +65℃(-4℉ to +149℉)
Relative humidity: < 90%,No condensation.
Size (L x W x H)
27 cm x 26.5 cm x 13.2 cm
Weight
About 4kg
Accessories:
Power cord
Fuse
User 's Manual
Product category: Instruments and apparatus for cardiac and thoracic surgery
MS400 Multiparameter Simulator
Introduction
MS400 Multiparameter Simulator is a portable device, features in small volume and light weight. It can simulate accurately 12-lead ECG, Respiration, Temperature, 2-channel IBP or 4-channel IBP. And it can be tested in where the monitor is used.
Features
Simulate 35 kinds of arrhythmia (including Atrial, Ventricular, Premature Beat and Conduction Defects) and pacemaker waveforms (including Asynchronous, Demand Occ Sinus, Demand Freq Sinus, A/V Sequential, Non Capture, Non Function).
Simulate four-channel IBP data.
Simulate respiration signal with adjustable respiration rate, impedance and baseline impedance, and three kinds of apnea data.
Simulate four kinds of temperature data.
Simulate square wave, triangle wave, pulse wave and sine wave with adjustable frequency.
Simulate standard ECG calibration, adult and pediatric ECG signal.
ECG waveform complied with the standard of ANSI/AAMI EC13-2002, AHA, MIT ECG database, other ECG database and user-defined waveform data stored in TF card can be displayed by the simulator and exported to the equipments to be tested.
Each waveform can be displayed by sliding the 3.5'' TFT touch screen, easy to operate.
Power supply: rechargeable lithium battery or linear adapter, which reduces interference.
Optional operation modes: keys and touch screen.
Parameters:
ECG
Conventional: All leads have the same voltage with the II-lead as the reference
Amplitude: 0.5,1.0,1.5 and 2.0mV
ECG Rate: 15,20,25,30,40,60,80,100,120,140,160,180,200,220,240,260,280,300,320,340 and 350 BPM
ECG artifacts: 50 and 60 Hz, muscle, baseline and breathing
The elevation of the ST segment: +0.8 to -0.8 mV, the step is 0.1 mV
Arrhythmia
Atrial: Atrial Fib(coarse), Atrial fib(fine), Atrial Flutter, Sinus Arrhythmia, Missed Beat, Atrial Tachycardia, Nodal Rhythm, Supraventricular Tachycardia
Ventricular: Vent Fib (coarse), Vent Fib (fine), PVCs 6/min, PVCs 12/min, PVCs 24/min, Frequent Multifocal, Bigeminy, Trigeminy, Paired PVCs, Run 5 PVCs, Run 11 PVCs, Vent Tachycardia, Asystole
Premature Beat: Atrial PAC, Nodal PNC, PVC1 LV Focus, PVC1 E LV Focus, R on T LV Focus, PVC2 RV Focus, PVC2 E RV Focus, R on T RV Focus, Multifocal PVC
Conduction Defects: First Degree Heart Block, Second Degree Heart Block, Third Degree Heart Block, Right Bundle Branch Block, Left Bundle Branch Block
Four IBP Channels
The default: 00/00mmHg
Dynamic IBP(unit: mmHg)
Channel 1:
Artery: 120/80
Radial: 120/80
Left Ventricle: 120/00
Right Ventricle: 25/00
Channel 2:
Artery: 120/80
Radial: 120/80
Left Ventricle: 120/00
Right Atrium(CVP): 15/10
Right Ventricle: 25/00
Pulmonary Artery: 25/10
Pulmonary Wedge: 10/2
Left Atrium: 14/4
Channel 3:
Artery: 120/80
Radial: 120/80
Left Ventricle: 120/00
Right Atrium(CVP): 15/10
Right Ventricle: 25/00
Pulmonary Artery: 25/10
Pulmonary Wedge: 10/2
Left Atrium: 14/4
Channel 4:
Auto Swan-Ganz (every 15 seconds): RA(CVP), RV, PA, PAW (Pulmonary Wedge)
Man Swan-Ganz: press ENTER key to change every time
Static-Pressure Levels
Channel 1: 0, 80, 160, 240, 320 and 400mmHg
Channel 2: 0, 50, 100, 150, 200 and 250mmHg
Channel 3: 0, 20, 40, 60, 80 and 100mmHg
Channel 4: P4 tracks the static pressure levels of P3
Respiration
Respiration Rate: 0 (Apnea), 15, 20, 30, 40, 60, 80, 100, 120 and 150 R/MIN
Impedance: 0.2, 0.5, 1.0 and 3.0 Ω
Baseline impedance: 500, 1000, 1500, 2000Ω
Apnea: 12 s, 22 s, 32 s
Temperature
Four temperature: 0℃(32°F), 24℃( 75°F), 37℃(98.6°F), 40℃(104°F)
Accessories
Standard accessories 9V/1A(CE) power adapter, an User manual, a packaging box, a plastic packaging.
Optional accessories a power adapter(15V/1A)(UL), a power adapter(15V/1A), a temperature cable, an IBP cable, a CD disk(including a case conversion software)
Physical characteristic
Dimension 18.86 cm(L)×12.50 cm(W)×4.32 cm(H)
Net weight about 1.4kg
MS400 Multiparameter Simulator is a portable device, features in small volume and light weight. It can simulate accurately 12-lead ECG, Respiration, Temperature, 2-channel IBP or 4-channel IBP. And it can be tested in where the monitor is used.
Features
Simulate 35 kinds of arrhythmia (including Atrial, Ventricular, Premature Beat and Conduction Defects) and pacemaker waveforms (including Asynchronous, Demand Occ Sinus, Demand Freq Sinus, A/V Sequential, Non Capture, Non Function).
Simulate four-channel IBP data.
Simulate respiration signal with adjustable respiration rate, impedance and baseline impedance, and three kinds of apnea data.
Simulate four kinds of temperature data.
Simulate square wave, triangle wave, pulse wave and sine wave with adjustable frequency.
Simulate standard ECG calibration, adult and pediatric ECG signal.
ECG waveform complied with the standard of ANSI/AAMI EC13-2002, AHA, MIT ECG database, other ECG database and user-defined waveform data stored in TF card can be displayed by the simulator and exported to the equipments to be tested.
Each waveform can be displayed by sliding the 3.5'' TFT touch screen, easy to operate.
Power supply: rechargeable lithium battery or linear adapter, which reduces interference.
Optional operation modes: keys and touch screen.
Parameters:
ECG
Conventional: All leads have the same voltage with the II-lead as the reference
Amplitude: 0.5,1.0,1.5 and 2.0mV
ECG Rate: 15,20,25,30,40,60,80,100,120,140,160,180,200,220,240,260,280,300,320,340 and 350 BPM
ECG artifacts: 50 and 60 Hz, muscle, baseline and breathing
The elevation of the ST segment: +0.8 to -0.8 mV, the step is 0.1 mV
Arrhythmia
Atrial: Atrial Fib(coarse), Atrial fib(fine), Atrial Flutter, Sinus Arrhythmia, Missed Beat, Atrial Tachycardia, Nodal Rhythm, Supraventricular Tachycardia
Ventricular: Vent Fib (coarse), Vent Fib (fine), PVCs 6/min, PVCs 12/min, PVCs 24/min, Frequent Multifocal, Bigeminy, Trigeminy, Paired PVCs, Run 5 PVCs, Run 11 PVCs, Vent Tachycardia, Asystole
Premature Beat: Atrial PAC, Nodal PNC, PVC1 LV Focus, PVC1 E LV Focus, R on T LV Focus, PVC2 RV Focus, PVC2 E RV Focus, R on T RV Focus, Multifocal PVC
Conduction Defects: First Degree Heart Block, Second Degree Heart Block, Third Degree Heart Block, Right Bundle Branch Block, Left Bundle Branch Block
Four IBP Channels
The default: 00/00mmHg
Dynamic IBP(unit: mmHg)
Channel 1:
Artery: 120/80
Radial: 120/80
Left Ventricle: 120/00
Right Ventricle: 25/00
Channel 2:
Artery: 120/80
Radial: 120/80
Left Ventricle: 120/00
Right Atrium(CVP): 15/10
Right Ventricle: 25/00
Pulmonary Artery: 25/10
Pulmonary Wedge: 10/2
Left Atrium: 14/4
Channel 3:
Artery: 120/80
Radial: 120/80
Left Ventricle: 120/00
Right Atrium(CVP): 15/10
Right Ventricle: 25/00
Pulmonary Artery: 25/10
Pulmonary Wedge: 10/2
Left Atrium: 14/4
Channel 4:
Auto Swan-Ganz (every 15 seconds): RA(CVP), RV, PA, PAW (Pulmonary Wedge)
Man Swan-Ganz: press ENTER key to change every time
Static-Pressure Levels
Channel 1: 0, 80, 160, 240, 320 and 400mmHg
Channel 2: 0, 50, 100, 150, 200 and 250mmHg
Channel 3: 0, 20, 40, 60, 80 and 100mmHg
Channel 4: P4 tracks the static pressure levels of P3
Respiration
Respiration Rate: 0 (Apnea), 15, 20, 30, 40, 60, 80, 100, 120 and 150 R/MIN
Impedance: 0.2, 0.5, 1.0 and 3.0 Ω
Baseline impedance: 500, 1000, 1500, 2000Ω
Apnea: 12 s, 22 s, 32 s
Temperature
Four temperature: 0℃(32°F), 24℃( 75°F), 37℃(98.6°F), 40℃(104°F)
Accessories
Standard accessories 9V/1A(CE) power adapter, an User manual, a packaging box, a plastic packaging.
Optional accessories a power adapter(15V/1A)(UL), a power adapter(15V/1A), a temperature cable, an IBP cable, a CD disk(including a case conversion software)
Physical characteristic
Dimension 18.86 cm(L)×12.50 cm(W)×4.32 cm(H)
Net weight about 1.4kg
Product category: Respiration equipment, oxygen equipment
Desktop Spirometor SP100
SP100 Spirometer is a portable lung function testing device, which mainly used to examine lung function related parameters for patients. It can be applied to various environments such as in hospitals, clinics, etc. And it is also suitable for communities, schools, factories and other places to conduct epidemiological investigation, health examination, occupational disease screenings.
Features
1)Measurement of Forced Vital Capacity (FVC), Vital Capacity (VC/SVC), maximum voluntary ventilation (MVV) and relevant functions, more than 50 parameters can be measured and displayed; for several times of measurement, the optimal result will be displayed; the condition of subject can be shown by the ratio of the measured value and the predicted value.
2)Measurement parameters:
Forced Vital Capacity (FVC): FVC,FEV1,PEF,FEV1%,(FEV1/FVC),FEF25,FEF50,FEF75,
FEF2575,FEV1/VC,FEV6,FEV1/FEV6,ELA,FET,EVOL,FIVC,FIV1,FIV1/FIVC,PIF,MVV,etc.
Vital Capacity (VC/SVC): VC,IC,ERV,IRV,EVC,IVC,TV,VE,RR,tI,tI/tE,tE,TV/tI,tI/ttot
Maximum Ventilatory Volume (MVV): MVV
3)Real-time display respiration waveform:Flow-Volume loop and Volume-Time curve chart;
4)7" color LCD touch screen, buttons can be operated along with touch screen;
5)Incentive animation operation guide, easy for the use between children and the old;
6)Built-in thermal printer, reports can be printed directly;
7)BTPS automatic correction function, compensate for the impact of environmental differences;
8)Test time and environment temperature display;
9)Calibration function, ensure measurement accuracy;
10)Multiple predicted value can be selected, suitable for different population;
11)Storage of more than 10,000 groups of data;
12)Lung age estimation function;
13)Built-in lithium battery, supports both of AC and DC.
Features
1)Measurement of Forced Vital Capacity (FVC), Vital Capacity (VC/SVC), maximum voluntary ventilation (MVV) and relevant functions, more than 50 parameters can be measured and displayed; for several times of measurement, the optimal result will be displayed; the condition of subject can be shown by the ratio of the measured value and the predicted value.
2)Measurement parameters:
Forced Vital Capacity (FVC): FVC,FEV1,PEF,FEV1%,(FEV1/FVC),FEF25,FEF50,FEF75,
FEF2575,FEV1/VC,FEV6,FEV1/FEV6,ELA,FET,EVOL,FIVC,FIV1,FIV1/FIVC,PIF,MVV,etc.
Vital Capacity (VC/SVC): VC,IC,ERV,IRV,EVC,IVC,TV,VE,RR,tI,tI/tE,tE,TV/tI,tI/ttot
Maximum Ventilatory Volume (MVV): MVV
3)Real-time display respiration waveform:Flow-Volume loop and Volume-Time curve chart;
4)7" color LCD touch screen, buttons can be operated along with touch screen;
5)Incentive animation operation guide, easy for the use between children and the old;
6)Built-in thermal printer, reports can be printed directly;
7)BTPS automatic correction function, compensate for the impact of environmental differences;
8)Test time and environment temperature display;
9)Calibration function, ensure measurement accuracy;
10)Multiple predicted value can be selected, suitable for different population;
11)Storage of more than 10,000 groups of data;
12)Lung age estimation function;
13)Built-in lithium battery, supports both of AC and DC.
Product category: Respiration equipment, oxygen equipment, Wearable technologies, smart textiles
Sleep apnea screen meter RS01
RS01 device is suitable for the one who suffers with such diseases as SAHS (sleep apnea-hypopnea syndrome), Its functions including patient’s sleep apnea monitoring and SpO2 monitoring, which can be applied in hospital or at home.
Features
1)SpO2 and PR value display, pulse sound and bar graph indication.
2)Pulse waveform and nose flow waveform display
3)Alarms for low power, finger out and exceeding limits
4)Battery status indication
5)Real-time clock
6)Timing power on/off
7)Storage of multiple cases
8)Continuous 12 hours data record
9)Uploading data via USB port
10)PC analysis software
Product category: Patient monitoring systems
Patient Monitor CMS7000
Introduction
This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual-channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving.
Main Features
■12.1'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish（Europe）, Spanish（Mexico）,Portuguese, Italian, Dutch, Romanian, Russian, Kazakh, Polish, Czech,Bulgarian, Ukraine)”
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Operation mode: keys and buttons.
■Display up to 8-channel waveform on one screen.
■Display 7-lead ECG waveform on one screen, and with ECG step function.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■HRV analysis function.
■NIBP measurement mode: Manual/AUTO/Continuous, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Print trend table data with one-key.
■Connect to Central Monitoring System by 3G, WiFi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual-channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving.
Main Features
■12.1'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish（Europe）, Spanish（Mexico）,Portuguese, Italian, Dutch, Romanian, Russian, Kazakh, Polish, Czech,Bulgarian, Ukraine)”
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Operation mode: keys and buttons.
■Display up to 8-channel waveform on one screen.
■Display 7-lead ECG waveform on one screen, and with ECG step function.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■HRV analysis function.
■NIBP measurement mode: Manual/AUTO/Continuous, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Print trend table data with one-key.
■Connect to Central Monitoring System by 3G, WiFi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
Product category: Patient monitoring systems
Patient Monitor CMS7000PLUS
Introduction
This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. Its replaceable internal battery brings lot of convenient for patient moving.
Main Features
■12.1'' TFT color LCD, multi-language interface(English, Chinese, Russian, Kazakhstan, Czech, Slovak).
■Touch screen operation, which improves the working efficiency for medical staff.
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Maximum 8-channel waveform synchronous display
■Display 7-lead ECG waveform on one screen.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■NIBP measurement mode: Manual/AUTO/Continuous, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Connect to Central Monitoring System by 3G, Wi-Fi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. Its replaceable internal battery brings lot of convenient for patient moving.
Main Features
■12.1'' TFT color LCD, multi-language interface(English, Chinese, Russian, Kazakhstan, Czech, Slovak).
■Touch screen operation, which improves the working efficiency for medical staff.
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Maximum 8-channel waveform synchronous display
■Display 7-lead ECG waveform on one screen.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■NIBP measurement mode: Manual/AUTO/Continuous, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Connect to Central Monitoring System by 3G, Wi-Fi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
Product category: Patient monitoring systems
Patient Monitor CMS9200PLUS
Introduction
This equipment is a portable monitor with touch screen, which can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual- channel TEMP. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving.
Main Features
■15'' TFT color LCD, multi-language interface(English, Chinese, Russian, Kazakhstan, Czech, Slovak).
■Touch screen operation, which improves the working efficiency for medical staff.
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Display up to 8-channel waveform on one screen.
■Display 7-lead ECG waveform on one screen.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■NIBP measurement mode: Manual/AUTO/Continuous, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Connect to Central Monitoring System by 3G, Wi-Fi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
This equipment is a portable monitor with touch screen, which can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual- channel TEMP. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving.
Main Features
■15'' TFT color LCD, multi-language interface(English, Chinese, Russian, Kazakhstan, Czech, Slovak).
■Touch screen operation, which improves the working efficiency for medical staff.
■Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
■All-round monitor for adult, pediatric and neonate.
■With standard interface, big character interface and view bed, convenient to observe.
■Waveform, parameter color and location can be set optionally.
■Display up to 8-channel waveform on one screen.
■Display 7-lead ECG waveform on one screen.
■Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
■NIBP measurement mode: Manual/AUTO/Continuous, storage for 4800-group NIBP data.
■Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
■Drug concentration calculation and titration table functions.
■Connect to Central Monitoring System by 3G, Wi-Fi or wired mode.
■AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
■Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
Product category: Ultrasound diagnostic equipment
Fetal Monitor CMS800G
Introduction
Fetal Monitor can real-time acquire FHR, TOCO and FMOV, which can provide reference data for clinical use. It can be used individually or connected with central monitoring system in obstetrical department to form a network monitoring system.
Main Features
■Compact design, it can be placed horizontally or hung on the wall.
■Color LCD, 60° convertible screen
■Display monitoring curve and data clearly
■Area mark for normal FHR(120 BPM~160 BPM).
■Manual record for fetal movement.
■Alarm for abnormal FHR
■Real-time monitoring for continuous 24 hours.
■Storage, playback and print the monitoring curve for continuous 12 hours.
■Optional interface languages: Chinese and English.
■Optional twins monitoring.
■9-crystal and broad beam transducer.
■Extra long-life and high-resolution built-in thermal printer.
■Communicate with central monitoring system by the built-in RJ45.
Fetal Monitor can real-time acquire FHR, TOCO and FMOV, which can provide reference data for clinical use. It can be used individually or connected with central monitoring system in obstetrical department to form a network monitoring system.
Main Features
■Compact design, it can be placed horizontally or hung on the wall.
■Color LCD, 60° convertible screen
■Display monitoring curve and data clearly
■Area mark for normal FHR(120 BPM~160 BPM).
■Manual record for fetal movement.
■Alarm for abnormal FHR
■Real-time monitoring for continuous 24 hours.
■Storage, playback and print the monitoring curve for continuous 12 hours.
■Optional interface languages: Chinese and English.
■Optional twins monitoring.
■9-crystal and broad beam transducer.
■Extra long-life and high-resolution built-in thermal printer.
■Communicate with central monitoring system by the built-in RJ45.
Product category: Instruments and apparatus for cardiac and thoracic surgery
Electrocardiograph ECG300G
Introduction
ECG300G is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting any rhythm lead, case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including manual, auto 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, auto 3-2+1, auto 3-2, auto 1×12+1, auto 1×12, rhythm 4, rhythm 3 and rhythm 2, etc. Waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
5)Built-in memory stores up to 1000 cases, convenient for case review and statistic.
Multi-language(Chinese, English, Spanish, Turkish, Polish, Italian, French, German, Portuguese, Kazakstan, Russian, Ukrainian, Serbian and Slovenian) interface and report.
ECG300G is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting any rhythm lead, case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including manual, auto 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, auto 3-2+1, auto 3-2, auto 1×12+1, auto 1×12, rhythm 4, rhythm 3 and rhythm 2, etc. Waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
5)Built-in memory stores up to 1000 cases, convenient for case review and statistic.
Multi-language(Chinese, English, Spanish, Turkish, Polish, Italian, French, German, Portuguese, Kazakstan, Russian, Ukrainian, Serbian and Slovenian) interface and report.
Product category: Instruments and apparatus for cardiac and thoracic surgery
Electrocardiograph ECG90A
Introduction
ECG90A is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in: recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for "Lead off" or "Lack of paper", optional interface languages(Chinese/English), case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Particular and high-accurate digital filter eliminates baseline drift, no distortion to ECG waveform, greatly enhances anti-baseline drift capacity, convenient for waveform judgment.
3)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
4)Real-time and continuously record the clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.).
5)Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz.
6)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
7)Optional SD card stores up to 100 cases, which is convenient for doctor to review case and statistic.
8)In review mode, case waveform stored can be checked, measurement parameter and diagnosis information can be automatically analyzed.
9)Two languages(Chinese or English) interface and report.
10)Optional ECG-Sync software, connect with PC by USB2.0 interface to form a ECG workstation, collect real-time data to the software for analyzing and printing the report, and old cases stored in Electrocardiograph can be uploaded to PC.
11)Power supply: AC/DC, and in optimal DC state, built-in rechargeable lithium battery can continuously work for 4-hour, print up to 90-minute and 150-ECG, which meets the requirements of visiting a patient at home and body examination. Rechargeable lithium battery is detachable, which is convenient for user to replace and charge in any time.
ECG90A is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in: recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for "Lead off" or "Lack of paper", optional interface languages(Chinese/English), case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Particular and high-accurate digital filter eliminates baseline drift, no distortion to ECG waveform, greatly enhances anti-baseline drift capacity, convenient for waveform judgment.
3)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
4)Real-time and continuously record the clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.).
5)Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz.
6)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
7)Optional SD card stores up to 100 cases, which is convenient for doctor to review case and statistic.
8)In review mode, case waveform stored can be checked, measurement parameter and diagnosis information can be automatically analyzed.
9)Two languages(Chinese or English) interface and report.
10)Optional ECG-Sync software, connect with PC by USB2.0 interface to form a ECG workstation, collect real-time data to the software for analyzing and printing the report, and old cases stored in Electrocardiograph can be uploaded to PC.
11)Power supply: AC/DC, and in optimal DC state, built-in rechargeable lithium battery can continuously work for 4-hour, print up to 90-minute and 150-ECG, which meets the requirements of visiting a patient at home and body examination. Rechargeable lithium battery is detachable, which is convenient for user to replace and charge in any time.
Product category: Instruments and apparatus for cardiac and thoracic surgery
Electrocardiograph ECG100G
Introduction
ECG100G is a kind of single channel electrocardiograph, which features in printing ECG waveform by thermal printing system, prompting for "Lead off" or "Lack of paper", multi-language interface, recording ECG waveform in AUTO/Manual mode, convenient to operate.
Main Features
1)Adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz.
3)Real-time and continuously record the clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.).
4)In AUTO mode, finish recording by pressing the button once, which improves work efficiency.
5)Multi-language (Chinese, English, French, Italian, German, Spanish and Turkish) interface and report.
6)In optimal DC state, up to 7-hour standby time, continuous print up to 4-hour, record up to 150 ECG waveform.
ECG100G is a kind of single channel electrocardiograph, which features in printing ECG waveform by thermal printing system, prompting for "Lead off" or "Lack of paper", multi-language interface, recording ECG waveform in AUTO/Manual mode, convenient to operate.
Main Features
1)Adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz.
3)Real-time and continuously record the clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.).
4)In AUTO mode, finish recording by pressing the button once, which improves work efficiency.
5)Multi-language (Chinese, English, French, Italian, German, Spanish and Turkish) interface and report.
6)In optimal DC state, up to 7-hour standby time, continuous print up to 4-hour, record up to 150 ECG waveform.
Product category: Instruments and apparatus for cardiac and thoracic surgery
Electrocardiograph ECG600G
Introduction
ECG600G is an Electrocardiograph which can collect 12-lead ECG signal simultaneously and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, case database management.
Main Features
1)Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz.
2)Real-time and continuously record clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.).
3)Full-digital filter design, anti-baseline drift, AC and EMG interference.
4)Adjust the baseline automatically, optimize the print setting and optional rhythm leads.
5)In AUTO mode, finish recording by pressing the button once, which improves work efficiency.
6)Adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
7)With the functions of auto-measurement, auto-analysis and auto-diagnosis for routine ECG parameters, which reduces the doctor’s burden and improves work efficiency.
8)Sync collection for 12-lead ECG, multiply printing formats, including 2×6+1(rhythm lead), 2×6, 3×4, 3×4+1(rhythm lead), 4×3, 4×3+1(rhythm lead), 6×2, 6×2+1(rhythm lead), rhythm 2, rhythm 3, rhythm 4, rhythm 5, rhythm 6, rhythm 7, channel record, etc.
9)Display of real-time 3/6/12-lead ECG, "Lead off" and "Lack of paper" on one screen, and with ECG DEMO mode. Auto-check and auto-analysis for ECG parameters, ECG waveform can be recorded manually or automatically. And patient information can be stored by case database.
10)Time print can be set to every 1/2/3/5/10/20/30/60 minutes.
11)Print setting, including “Print and save”(print waveform and save case), “Print no save”(only print waveform but not save case), “Save no print”(only save case but not print waveform).
12)AC/DC, built-in rechargeable lithium battery and auto-protection circuit, and automatic power off when there is no operation in appointed time.
13)Store more than 1000 cases, convenient for case review and statistic.
14)Multi-language(Chinese, English, French, Spanish, Turkish, Polish, Italian, German, Portuguese, Kazakh, Russian, Ukrainian, Vietnamese, Serbian, Slovenian and Slovak) interface and report.
ECG600G is an Electrocardiograph which can collect 12-lead ECG signal simultaneously and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, case database management.
Main Features
1)Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz.
2)Real-time and continuously record clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.).
3)Full-digital filter design, anti-baseline drift, AC and EMG interference.
4)Adjust the baseline automatically, optimize the print setting and optional rhythm leads.
5)In AUTO mode, finish recording by pressing the button once, which improves work efficiency.
6)Adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
7)With the functions of auto-measurement, auto-analysis and auto-diagnosis for routine ECG parameters, which reduces the doctor’s burden and improves work efficiency.
8)Sync collection for 12-lead ECG, multiply printing formats, including 2×6+1(rhythm lead), 2×6, 3×4, 3×4+1(rhythm lead), 4×3, 4×3+1(rhythm lead), 6×2, 6×2+1(rhythm lead), rhythm 2, rhythm 3, rhythm 4, rhythm 5, rhythm 6, rhythm 7, channel record, etc.
9)Display of real-time 3/6/12-lead ECG, "Lead off" and "Lack of paper" on one screen, and with ECG DEMO mode. Auto-check and auto-analysis for ECG parameters, ECG waveform can be recorded manually or automatically. And patient information can be stored by case database.
10)Time print can be set to every 1/2/3/5/10/20/30/60 minutes.
11)Print setting, including “Print and save”(print waveform and save case), “Print no save”(only print waveform but not save case), “Save no print”(only save case but not print waveform).
12)AC/DC, built-in rechargeable lithium battery and auto-protection circuit, and automatic power off when there is no operation in appointed time.
13)Store more than 1000 cases, convenient for case review and statistic.
14)Multi-language(Chinese, English, French, Spanish, Turkish, Polish, Italian, German, Portuguese, Kazakh, Russian, Ukrainian, Vietnamese, Serbian, Slovenian and Slovak) interface and report.
Product category: Instruments and apparatus for cardiac and thoracic surgery
Electrocardiograph ECG300GA
Introduction
ECG300GA is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in: recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for "Lead off" or "Lack of paper", optional interface languages(Chinese/English), case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 1/2/3-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including manual, auto 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, etc. Waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
5)Built-in memory stores up to 15 cases(optional SD card, store up to 50 cases), convenient for case review and statistic.
6)Two languages(Chinese or English) interface and report.
7)AC/DC, and in optimal DC state, built-in rechargeable lithium battery can continuously work for 8-hour, print up to 70-minute and 175-ECG, which meets the requirements of visiting a patient at home and body examination.
ECG300GA is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in: recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for "Lead off" or "Lack of paper", optional interface languages(Chinese/English), case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 1/2/3-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including manual, auto 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, etc. Waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
5)Built-in memory stores up to 15 cases(optional SD card, store up to 50 cases), convenient for case review and statistic.
6)Two languages(Chinese or English) interface and report.
7)AC/DC, and in optimal DC state, built-in rechargeable lithium battery can continuously work for 8-hour, print up to 70-minute and 175-ECG, which meets the requirements of visiting a patient at home and body examination.
Product category: Instruments and apparatus for cardiac and thoracic surgery
Electrocardiograph ECG300GT
Introduction
ECG300GT is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in: recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for "Lead off" or "Lack of paper", multi-language interface, case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including manual, auto 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, auto 3-2+1, auto 3-2, auto 1×12+1, auto 1×12, rhythm 4, rhythm 3 and rhythm 2, etc. Waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
5)Built-in memory stores up to 1000 cases, convenient for case review and statistic.
6)Multi-language(Chinese, English, Spanish, Turkish, Polish, Italian, French, German, Portuguese, Kazakstan, Russian, Ukrainian, Serbian and Slovenian) interface and report.
ECG300GT is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in: recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for "Lead off" or "Lack of paper", multi-language interface, case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including manual, auto 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, auto 3-2+1, auto 3-2, auto 1×12+1, auto 1×12, rhythm 4, rhythm 3 and rhythm 2, etc. Waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
5)Built-in memory stores up to 1000 cases, convenient for case review and statistic.
6)Multi-language(Chinese, English, Spanish, Turkish, Polish, Italian, French, German, Portuguese, Kazakstan, Russian, Ukrainian, Serbian and Slovenian) interface and report.
Product category: Instruments and apparatus for cardiac and thoracic surgery
Electrocardiograph ECG1212G
Introduction
The device is an electrocardiograph which can collect 12-lead ECG signal simultaneously and print ECG waveform with thermal printing system. It features in, recording and displaying ECG waveform in auto / manual mode; measuring, analyzing and diagnosing ECG waveform parameters automatically; prompting for “Lead off” and “Lack of paper”; optional interface language (Chinese / English, etc.); built-in lithium battery, AC / DC; selecting rhythm lead freely to observe abnormal heart rhythm; case database management.
Function
Adopt 10.1'' high-resolution color LCD, operate by full-touch screen and function bu ttons, convenient to use.
Sync collection for 12-lead ECG, support 12-lead and Cabrera-lead waveform display. Get high-quality ECG waveform via power frequency filter (50 / 60 Hz), baseline filter and EMG filter (25 / 35 Hz) of ECG signal.
Display 3 / 6 / 12 - lead ECG waveform, HR value, print mode, sensitivity, paper speed, filter state, clock, battery power, background grid, measured parameter and interpretation, etc. on one screen, and with prompt functions for lead - off, overload and system working state.
Power supply: AC / DC (which can adapt AC 50 / 60Hz), with built-in rechargeable lithium battery, charging circuit, perfect over-current and over-voltage protection circuit.
In optimal DC state, up to 10-hour standby time, continuous print for more than 3-hour, which meets the requirements of visiting a patient at home and body examination.
Built-in thermal printer, support multiple printing modes and formats, such as, auto M × N, M × N + 1, M × N + 2, rhythm M line and manual, etc. The contents including time, paper speed, sensitivity, calibration signal, lead name, filter state and patient information can be printed. The waveform length printed, measurement parameter output, diagnosis conclusion, superimposed QRS waveform, histogram, trend chart and interval list, etc. can be set. With the print functions (timing print and auto-print for arrhythmia, etc.), which meet different requirements.
With the functions of auto-measurement and auto-interpretation for routine ECG parameters, provide measured results and auto-diagnosis conclusions for HR, PR interval, P Duration, QRS Duration, QT / QTc interval, P / QRS / T Axis, R (V5), S (V1), R (V5) + S (V1) amplitude, etc. which reduces the doctor’s burden.
Built-in memory stores 4000 cases (data saving time: 10 s) at least, convenient for case review and statistic.
Historical cases can be reviewed, inquired, modified, transmitted, printed, lead corrected, the cases can also be exported to other electronic file formats (dat, pdf, xml, bmp, jpeg, etc.)
Chinese / English operating interface, the report in corresponding language can be printed; built-in virtual keyboard, support Chinese / English input method.
Support external USB standard keyboard, mouse, scanner and printer.
The device is an electrocardiograph which can collect 12-lead ECG signal simultaneously and print ECG waveform with thermal printing system. It features in, recording and displaying ECG waveform in auto / manual mode; measuring, analyzing and diagnosing ECG waveform parameters automatically; prompting for “Lead off” and “Lack of paper”; optional interface language (Chinese / English, etc.); built-in lithium battery, AC / DC; selecting rhythm lead freely to observe abnormal heart rhythm; case database management.
Function
Adopt 10.1'' high-resolution color LCD, operate by full-touch screen and function bu ttons, convenient to use.
Sync collection for 12-lead ECG, support 12-lead and Cabrera-lead waveform display. Get high-quality ECG waveform via power frequency filter (50 / 60 Hz), baseline filter and EMG filter (25 / 35 Hz) of ECG signal.
Display 3 / 6 / 12 - lead ECG waveform, HR value, print mode, sensitivity, paper speed, filter state, clock, battery power, background grid, measured parameter and interpretation, etc. on one screen, and with prompt functions for lead - off, overload and system working state.
Power supply: AC / DC (which can adapt AC 50 / 60Hz), with built-in rechargeable lithium battery, charging circuit, perfect over-current and over-voltage protection circuit.
In optimal DC state, up to 10-hour standby time, continuous print for more than 3-hour, which meets the requirements of visiting a patient at home and body examination.
Built-in thermal printer, support multiple printing modes and formats, such as, auto M × N, M × N + 1, M × N + 2, rhythm M line and manual, etc. The contents including time, paper speed, sensitivity, calibration signal, lead name, filter state and patient information can be printed. The waveform length printed, measurement parameter output, diagnosis conclusion, superimposed QRS waveform, histogram, trend chart and interval list, etc. can be set. With the print functions (timing print and auto-print for arrhythmia, etc.), which meet different requirements.
With the functions of auto-measurement and auto-interpretation for routine ECG parameters, provide measured results and auto-diagnosis conclusions for HR, PR interval, P Duration, QRS Duration, QT / QTc interval, P / QRS / T Axis, R (V5), S (V1), R (V5) + S (V1) amplitude, etc. which reduces the doctor’s burden.
Built-in memory stores 4000 cases (data saving time: 10 s) at least, convenient for case review and statistic.
Historical cases can be reviewed, inquired, modified, transmitted, printed, lead corrected, the cases can also be exported to other electronic file formats (dat, pdf, xml, bmp, jpeg, etc.)
Chinese / English operating interface, the report in corresponding language can be printed; built-in virtual keyboard, support Chinese / English input method.
Support external USB standard keyboard, mouse, scanner and printer.
Product category: Instruments and apparatus for cardiac and thoracic surgery, Wearable technologies, smart textiles
Dynamic ECG Systems TLC5000
ntroduction
Dynamic ECG Systems adopt 12-lead system of international standard, which can continuously record ECG waveform for 24-hour and analyze ECG waveform by the PC software. It is applicable for use in medical institution and community.
Main Features
1)The recorder can real-time store ECG data for 24-hour.
2)Arrhythmia analysis basing on MCSSTM and TMCATM can greatly reduce doctor’s work.
3)Sync analysis for 12-lead, which ensures that QRS waveform can be found accurately, and no distortion.
4)With more than 10 templates(such as atrial premature beat, ventricular premature beat, long interval, atrial fibrillation, etc.) and many user-defined modules, which can almost distinguish any kind of pathologic waveforms.
5)Flexible analysis channel selection function, which ensures that any channels can be selected as the main analysis channel.
6)Flexible atrial fibrillation analysis, which ensures that physicians can use the whole or segmented AUTO/manual analysis, more accurate in atrial fibrillation analysis.
7)All pacemakers(such as AAI, VVI, DDD etc.) can be analyzed by the powerful pacemaker analysis function.
8)With many pacing analysis templates, such as “Dual chamber pacing”, “Atrial pacing”, “Ventricular pacing”, “Ventricular Pseudofusion” and “Ventricular asynchronous pacing”, etc.
9)Single or full-lead ECG in any time bucket can be reviewed by the fast review analysis function.
10)With analysis functions for 5-minute, 1-hour and 24-hour heart rate variability.
11)One-key print, convenient and fast to print the reports.
12)Perfect case management function.
13)Abnormal ST can be analyzed according to the whole and event by the advanced ST segment analysis and total load of myocardial ischemia, which can help the doctors comprehensively judge myocardial ischemia.
14)The risk of sleep breath pause can be predicted by the unique "Sleep breath pause syndrome"analysis function.
15)The death risk in patients with myocardial infarction can be predicted by the "HRT" analysis function.
16)“T-Wave alternation” is an important index to predict the malignant arrhythmia and sudden cardiac death.
With QTD(QT dispersion), VCG(vector cardiogram), VLP(ventricular late potential) and TVCG(time vector cardiogram) analysis modules, more valuable in analysis report.
Dynamic ECG Systems adopt 12-lead system of international standard, which can continuously record ECG waveform for 24-hour and analyze ECG waveform by the PC software. It is applicable for use in medical institution and community.
Main Features
1)The recorder can real-time store ECG data for 24-hour.
2)Arrhythmia analysis basing on MCSSTM and TMCATM can greatly reduce doctor’s work.
3)Sync analysis for 12-lead, which ensures that QRS waveform can be found accurately, and no distortion.
4)With more than 10 templates(such as atrial premature beat, ventricular premature beat, long interval, atrial fibrillation, etc.) and many user-defined modules, which can almost distinguish any kind of pathologic waveforms.
5)Flexible analysis channel selection function, which ensures that any channels can be selected as the main analysis channel.
6)Flexible atrial fibrillation analysis, which ensures that physicians can use the whole or segmented AUTO/manual analysis, more accurate in atrial fibrillation analysis.
7)All pacemakers(such as AAI, VVI, DDD etc.) can be analyzed by the powerful pacemaker analysis function.
8)With many pacing analysis templates, such as “Dual chamber pacing”, “Atrial pacing”, “Ventricular pacing”, “Ventricular Pseudofusion” and “Ventricular asynchronous pacing”, etc.
9)Single or full-lead ECG in any time bucket can be reviewed by the fast review analysis function.
10)With analysis functions for 5-minute, 1-hour and 24-hour heart rate variability.
11)One-key print, convenient and fast to print the reports.
12)Perfect case management function.
13)Abnormal ST can be analyzed according to the whole and event by the advanced ST segment analysis and total load of myocardial ischemia, which can help the doctors comprehensively judge myocardial ischemia.
14)The risk of sleep breath pause can be predicted by the unique "Sleep breath pause syndrome"analysis function.
15)The death risk in patients with myocardial infarction can be predicted by the "HRT" analysis function.
16)“T-Wave alternation” is an important index to predict the malignant arrhythmia and sudden cardiac death.
With QTD(QT dispersion), VCG(vector cardiogram), VLP(ventricular late potential) and TVCG(time vector cardiogram) analysis modules, more valuable in analysis report.
Product category: Instruments and apparatus for cardiac and thoracic surgery, Wearable technologies, smart textiles
Dynamic ECG Systems TLC9803
Introduction
Dynamic ECG Systems adopt 3-lead, which can continuously record ECG waveform for 24-hour and analyze ECG waveform by the PC software. It is applicable for use in medical institution and community.
Main Features
1)The recorder can real-time store ECG data for 24-hour.
2)Arrhythmia analysis basing on MCSSTM and TMCATM can greatly reduce doctor’s work.
3)With more than 10 templates(such as atrial premature beat, ventricular premature beat, long interval, atrial fibrillation, etc.) and many user-defined modules, which can almost distinguish any kind of pathologic waveforms.
4)Flexible analysis channel selection function, which ensures that any channels can be selected as the main analysis channel.
5)Flexible atrial fibrillation analysis, which ensures that physicians can use the whole or segmented AUTO/manual analysis, more accurate in atrial fibrillation analysis.
6)All pacemakers(such as AAI, VVI, DDD etc.) can be analyzed by the powerful pacemaker analysis function.
7)With many pacing analysis templates, such as “Dual chamber pacing”, “Atrial pacing”, “Ventricular pacing”, “Ventricular Pseudofusion” and “Ventricular asynchronous pacing”, etc.
8)Single or full-lead ECG in any time bucket can be reviewed by the fast review analysis function.
9)With analysis functions for 5-minute, 1-hour and 24-hour heart rate variability.
10)One-key print, convenient and fast to print the reports.
11)Perfect case management function.
12)The risk of sleep breath pause can be predicted by the unique "Sleep breath pause syndrome"analysis function.
13)The death risk in patients with myocardial infarction can be predicted by the "HRT" analysis function.
14)“T-Wave alternation” is an important index to predict the malignant arrhythmia and sudden cardiac death
Dynamic ECG Systems adopt 3-lead, which can continuously record ECG waveform for 24-hour and analyze ECG waveform by the PC software. It is applicable for use in medical institution and community.
Main Features
1)The recorder can real-time store ECG data for 24-hour.
2)Arrhythmia analysis basing on MCSSTM and TMCATM can greatly reduce doctor’s work.
3)With more than 10 templates(such as atrial premature beat, ventricular premature beat, long interval, atrial fibrillation, etc.) and many user-defined modules, which can almost distinguish any kind of pathologic waveforms.
4)Flexible analysis channel selection function, which ensures that any channels can be selected as the main analysis channel.
5)Flexible atrial fibrillation analysis, which ensures that physicians can use the whole or segmented AUTO/manual analysis, more accurate in atrial fibrillation analysis.
6)All pacemakers(such as AAI, VVI, DDD etc.) can be analyzed by the powerful pacemaker analysis function.
7)With many pacing analysis templates, such as “Dual chamber pacing”, “Atrial pacing”, “Ventricular pacing”, “Ventricular Pseudofusion” and “Ventricular asynchronous pacing”, etc.
8)Single or full-lead ECG in any time bucket can be reviewed by the fast review analysis function.
9)With analysis functions for 5-minute, 1-hour and 24-hour heart rate variability.
10)One-key print, convenient and fast to print the reports.
11)Perfect case management function.
12)The risk of sleep breath pause can be predicted by the unique "Sleep breath pause syndrome"analysis function.
13)The death risk in patients with myocardial infarction can be predicted by the "HRT" analysis function.
14)“T-Wave alternation” is an important index to predict the malignant arrhythmia and sudden cardiac death
Product category: Instruments and apparatus for cardiac and thoracic surgery, Wearable technologies, smart textiles
Dynamic ECG Systems TLC6000
Introduction
Dynamic ECG Systems adopt 12-lead system of international standard, which can continuously record ECG waveform for 48-hour and analyze ECG waveform by the PC software. It is applicable for use in medical institution and community.
Main Features
1)Adopt 12-lead system of international standard, continuously record ECG waveform up to 48-hour.
2)Sync analysis for 12-lead, and any channels can be selected as the main analysis channel, which ensures that QRS waveform can be found accurately, and no distortion.
3)With more than 10 templates(such as atrial premature beat, ventricular premature beat, long interval, atrial fibrillation, etc.) and many user-defined modules, which can almost distinguish any kind of pathologic waveforms.
4)Flexible atrial fibrillation analysis, which ensures that physicians can use the whole or segmented AUTO/manual analysis, more accurate in atrial fibrillation analysis.
5)All pacemakers(such as AAI, VVI, DDD etc.) can be analyzed by the powerful pacemaker analysis function.
6)Single or full-lead ECG in any time bucket can be reviewed by the fast review analysis function.
7)With analysis functions for 5-minute, 1-hour and whole heart rate variability.
8)One-key print, convenient and fast to print the reports.
9)The death risk in patients with myocardial infarction can be predicted by the "HRT" analysis function.
10)“T-Wave alternation” is an important index to predict the malignant arrhythmia and sudden cardiac death.
11)With QTD(QT dispersion), VCG(vector cardiogram), VLP(ventricular late potential) and TVCG(time vector cardiogram) analysis modules, more valuable in analysis report.
Dynamic ECG Systems adopt 12-lead system of international standard, which can continuously record ECG waveform for 48-hour and analyze ECG waveform by the PC software. It is applicable for use in medical institution and community.
Main Features
1)Adopt 12-lead system of international standard, continuously record ECG waveform up to 48-hour.
2)Sync analysis for 12-lead, and any channels can be selected as the main analysis channel, which ensures that QRS waveform can be found accurately, and no distortion.
3)With more than 10 templates(such as atrial premature beat, ventricular premature beat, long interval, atrial fibrillation, etc.) and many user-defined modules, which can almost distinguish any kind of pathologic waveforms.
4)Flexible atrial fibrillation analysis, which ensures that physicians can use the whole or segmented AUTO/manual analysis, more accurate in atrial fibrillation analysis.
5)All pacemakers(such as AAI, VVI, DDD etc.) can be analyzed by the powerful pacemaker analysis function.
6)Single or full-lead ECG in any time bucket can be reviewed by the fast review analysis function.
7)With analysis functions for 5-minute, 1-hour and whole heart rate variability.
8)One-key print, convenient and fast to print the reports.
9)The death risk in patients with myocardial infarction can be predicted by the "HRT" analysis function.
10)“T-Wave alternation” is an important index to predict the malignant arrhythmia and sudden cardiac death.
11)With QTD(QT dispersion), VCG(vector cardiogram), VLP(ventricular late potential) and TVCG(time vector cardiogram) analysis modules, more valuable in analysis report.
Product category: Instruments and apparatus for cardiac and thoracic surgery, eHealth, telemedicine / telematics / telemetry
ECG Workstation CONTEC8000G/GW
Introduction
The device acquires functions that including synchronous sampling of conventional 12-lead ECG data and 3-lead vector ECG data, various forms of analysis and diagnosis, report output and other functions. As an integrated ECG analysis system, the devic can reflect the movement of user's heart timely and accurately. The device is applicable for ECG examination in medical and health institutions at all levels, providing accurate and reliable basis for diagnosis.
Main Features
1. Compact and portable design for Recorder, support Wilson and Frank lead system, with lead-off indicator light.
2. Adopt real-time sampling, display and store mode, it has many functions, such as QRS wave analyzing in real-time, heart rate calculating and real-time printing, and provides multiple filter methods to avoid from baseline drift and interference.
3. Adopt advanced ECG analysis arithmetic, more perfect for the computer to seek points, and obtain reliable auto-recognizing sort of arrhythmia, which makes the analyzing report and conclusion more valuable.
4. ECG waveform is displayed using anti-aliasing technology clearly and intelligently, lead position can be adjusted, which solves the problem of overlapping waveform caused by baseline drift or high amplitude waveform.
5. High sampling frequency (1000Hz) ensures no distortion of ECG waveform. High resolution in display and printout guarantees the details of ECG waveform.
6. Provide dozens of sync and continuous display and print mode, including 6x2, 3x4, 3x4+2, etc. Auxiliary tool, such as superposed waveform analysis, electronic scale and editable terminology database, etc., brings much more convenient for diagnosis and clinical application.
7. Multiple analysis function, including: conventional 12-lead ECG, Frequency Cardiogram (FCG), High Frequency ECG, QT internal dispersion analysis, Heart Rate Variability (HRV) analysis, myocardium ischemia (STLE) analysis, Heart rate turbulence (HRT) analysis, Pacing ECG analysis, Vector Cardiogram (VCG), Time Vector Cardiogram (TVCG) and SAECG etc.
8. The "shortcut print" function can preview or print the whole analysis reports, and save them in PC with multimedia format (BMP, PNG, PDF or JPG format) according to factual need.
9. Support calling external procedures to obtain patient information of unknown origin, export HL7 aECG standard format ECG data, print electronic report and send notice to external procedure, convenience for systems docking with hospital HIS, PACS and others.
The device acquires functions that including synchronous sampling of conventional 12-lead ECG data and 3-lead vector ECG data, various forms of analysis and diagnosis, report output and other functions. As an integrated ECG analysis system, the devic can reflect the movement of user's heart timely and accurately. The device is applicable for ECG examination in medical and health institutions at all levels, providing accurate and reliable basis for diagnosis.
Main Features
1. Compact and portable design for Recorder, support Wilson and Frank lead system, with lead-off indicator light.
2. Adopt real-time sampling, display and store mode, it has many functions, such as QRS wave analyzing in real-time, heart rate calculating and real-time printing, and provides multiple filter methods to avoid from baseline drift and interference.
3. Adopt advanced ECG analysis arithmetic, more perfect for the computer to seek points, and obtain reliable auto-recognizing sort of arrhythmia, which makes the analyzing report and conclusion more valuable.
4. ECG waveform is displayed using anti-aliasing technology clearly and intelligently, lead position can be adjusted, which solves the problem of overlapping waveform caused by baseline drift or high amplitude waveform.
5. High sampling frequency (1000Hz) ensures no distortion of ECG waveform. High resolution in display and printout guarantees the details of ECG waveform.
6. Provide dozens of sync and continuous display and print mode, including 6x2, 3x4, 3x4+2, etc. Auxiliary tool, such as superposed waveform analysis, electronic scale and editable terminology database, etc., brings much more convenient for diagnosis and clinical application.
7. Multiple analysis function, including: conventional 12-lead ECG, Frequency Cardiogram (FCG), High Frequency ECG, QT internal dispersion analysis, Heart Rate Variability (HRV) analysis, myocardium ischemia (STLE) analysis, Heart rate turbulence (HRT) analysis, Pacing ECG analysis, Vector Cardiogram (VCG), Time Vector Cardiogram (TVCG) and SAECG etc.
8. The "shortcut print" function can preview or print the whole analysis reports, and save them in PC with multimedia format (BMP, PNG, PDF or JPG format) according to factual need.
9. Support calling external procedures to obtain patient information of unknown origin, export HL7 aECG standard format ECG data, print electronic report and send notice to external procedure, convenience for systems docking with hospital HIS, PACS and others.
Product category: Patient monitoring systems
VET MONITOR CMS8000-VET
Introduction
The CMS8000VET Veterinary Monitor has abundant monitoring functions and can be used for monitoring of cat, dog and other animals. User may select different parameter configurations according to different requirements. It adopts 100-240V～,50/60Hz for power supply, 12.1'' TFT color LCD for displaying real-time data and waveform, and up to 8-channel waveform and all monitoring parameters can be displayed simultaneously. In addition, it can be connected to the central monitoring system via wired/wireless network so as to form a network monitoring system. This device can monitor such parameters as ECG, RESP, NIBP, SpO2 and dual- channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for moving.
Function
12.1'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
Operation mode: keys and buttons.
Display up to 8-channel waveform on one screen.
Display 7-lead ECG waveform on one screen, and with ECG step function.
Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
NIBP measurement mode: Manual/AUTO/STAT, storage for 4800-group NIBP data.
Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
Drug concentration calculation and titration table functions.
Print trend table data with one-key.
Connect to Central Monitoring System by 3G, WiFi or wired mode.
AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
The CMS8000VET Veterinary Monitor has abundant monitoring functions and can be used for monitoring of cat, dog and other animals. User may select different parameter configurations according to different requirements. It adopts 100-240V～,50/60Hz for power supply, 12.1'' TFT color LCD for displaying real-time data and waveform, and up to 8-channel waveform and all monitoring parameters can be displayed simultaneously. In addition, it can be connected to the central monitoring system via wired/wireless network so as to form a network monitoring system. This device can monitor such parameters as ECG, RESP, NIBP, SpO2 and dual- channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for moving.
Function
12.1'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
Operation mode: keys and buttons.
Display up to 8-channel waveform on one screen.
Display 7-lead ECG waveform on one screen, and with ECG step function.
Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
NIBP measurement mode: Manual/AUTO/STAT, storage for 4800-group NIBP data.
Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
Drug concentration calculation and titration table functions.
Print trend table data with one-key.
Connect to Central Monitoring System by 3G, WiFi or wired mode.
AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
Product category: Patient monitoring systems
VET MONITOR CMS6000VET
Introduction
The CMS6000VET Veterinary Monitor has abundant monitoring functions and can be used for monitoring of cat, dog and other animals. User may select different parameter configurations according to different requirements. It adopts 100-240V～,50/60Hz for power supply, 8'' TFT color LCD for displaying real-time data and waveform, and up to 8-channel waveform and all monitoring parameters can be displayed simultaneously. A 48mm thermal printer has equipped with the device. In addition, it can be connected to the central monitoring system via wired/wireless network so as to form a network monitoring system. This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual- channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment.
Function
8'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
Waveform, parameter color and location can be set optionally.
Operation mode: keys and buttons.
Display up to 8-channel waveform on one screen.
Display 7-lead ECG waveform on one screen, and with ECG step function.
Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
NIBP measurement mode: Manual/AUTO/STAT, storage for 4800-group NIBP data.
Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
Drug concentration calculation and titration table functions.
Print trend table data with one-key.
Connect to Central Monitoring System by 3G, WiFi or wired mode.
AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
The CMS6000VET Veterinary Monitor has abundant monitoring functions and can be used for monitoring of cat, dog and other animals. User may select different parameter configurations according to different requirements. It adopts 100-240V～,50/60Hz for power supply, 8'' TFT color LCD for displaying real-time data and waveform, and up to 8-channel waveform and all monitoring parameters can be displayed simultaneously. A 48mm thermal printer has equipped with the device. In addition, it can be connected to the central monitoring system via wired/wireless network so as to form a network monitoring system. This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual- channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment.
Function
8'' TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
Waveform, parameter color and location can be set optionally.
Operation mode: keys and buttons.
Display up to 8-channel waveform on one screen.
Display 7-lead ECG waveform on one screen, and with ECG step function.
Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
NIBP measurement mode: Manual/AUTO/STAT, storage for 4800-group NIBP data.
Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
Drug concentration calculation and titration table functions.
Print trend table data with one-key.
Connect to Central Monitoring System by 3G, WiFi or wired mode.
AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
Anti-high frequency surgical unit, defibrillation-proof(special leads are necessary).
Product category: Instruments and apparatus for cardiac and thoracic surgery
VET ELECTROCARDIOGRAPH ECG300G-VET
Introduction
ECG300G-VET is a three channel electrocardiograph sampling ECG signals simultaneously and printing ECG waveform with thermal printing system, which features in, record and display ECG waveform in manual or auto-mode, promptings for “Lead off” and “Lack of paper”, multiple languages interface, support both AC and DC for power supply, optional rhythm lead that convenient for abnormal heart rate observation, case database management, etc.
Function
Sync sampling, digital signal processor, gets better quality ECG waveform by ECG signals filtering through the power frequency filter, baseline filter and EMG filter.
Display 3/6/12-lead ECG waveform, and states of print mode, sensitivity, paper speed, filter, etc. in one screen, convenient for contrastively diagnosing.
Multi-print mode and format: manual and automatic 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, auto 3-2+1, auto 3-2, auto 1x12+1, auto 1x12, rhythm 4, rhythm 3 and rhythm2, etc. Waveform length can be adjusted and timing print function is available, which meets the need of different applications.
Built-in high-capacity memorizer can store up to 1000 cases, which is convenient for doctor’s review and statistic.
The interface languages including: Chinese, English, Spanish, Turkish, Polish, Italian, French, German, Portuguese, Kazak Tili, Russian, Ukrainian, Serbian and Slovenian. Also the reports can be printed in all languages above.
ECG300G-VET is a three channel electrocardiograph sampling ECG signals simultaneously and printing ECG waveform with thermal printing system, which features in, record and display ECG waveform in manual or auto-mode, promptings for “Lead off” and “Lack of paper”, multiple languages interface, support both AC and DC for power supply, optional rhythm lead that convenient for abnormal heart rate observation, case database management, etc.
Function
Sync sampling, digital signal processor, gets better quality ECG waveform by ECG signals filtering through the power frequency filter, baseline filter and EMG filter.
Display 3/6/12-lead ECG waveform, and states of print mode, sensitivity, paper speed, filter, etc. in one screen, convenient for contrastively diagnosing.
Multi-print mode and format: manual and automatic 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, auto 3-2+1, auto 3-2, auto 1x12+1, auto 1x12, rhythm 4, rhythm 3 and rhythm2, etc. Waveform length can be adjusted and timing print function is available, which meets the need of different applications.
Built-in high-capacity memorizer can store up to 1000 cases, which is convenient for doctor’s review and statistic.
The interface languages including: Chinese, English, Spanish, Turkish, Polish, Italian, French, German, Portuguese, Kazak Tili, Russian, Ukrainian, Serbian and Slovenian. Also the reports can be printed in all languages above.
Product category: Instruments and apparatus for cardiac and thoracic surgery
ELECTROCARDIOGRAPH ECG1200G
Introduction
ECG1200G is an electrocardiograph which can collect 12-lead ECG signal simultaneously and print ECG waveform with thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting rhythm lead, printing the trend chart and histogram of P-R interval, case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including auto 12x1, auto 6x2+1, auto 6x2+1_H, auto 6x2, auto 6x2_H, auto 3x4+1, auto 3x4+2, rhythm 12, rhythm 10, rhythm 8, rhythm 6, manual, etc. Trend chart and histogram of P-R interval can be printed, waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)Paper speed: 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s.
5)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
6)Built-in memory stores up to 1000 cases, convenient for case review and statistic.
7)Multi-language(Turkish, French, Chinese, English, German, Kazakstan, Polish, Portuguese, Russian, Slovenian, Spanish and Ukrainian) interface and report.
8)In optimal DC state, up to 10-hour standby time, continuous print more than 3-hour, record up to 300 ECG waveform(commonly, it is 3s case), which meets the requirements of visiting a patient at home and body examination.
ECG1200G is an electrocardiograph which can collect 12-lead ECG signal simultaneously and print ECG waveform with thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting rhythm lead, printing the trend chart and histogram of P-R interval, case database management.
Main Features
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including auto 12x1, auto 6x2+1, auto 6x2+1_H, auto 6x2, auto 6x2_H, auto 3x4+1, auto 3x4+2, rhythm 12, rhythm 10, rhythm 8, rhythm 6, manual, etc. Trend chart and histogram of P-R interval can be printed, waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)Paper speed: 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s.
5)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
6)Built-in memory stores up to 1000 cases, convenient for case review and statistic.
7)Multi-language(Turkish, French, Chinese, English, German, Kazakstan, Polish, Portuguese, Russian, Slovenian, Spanish and Ukrainian) interface and report.
8)In optimal DC state, up to 10-hour standby time, continuous print more than 3-hour, record up to 300 ECG waveform(commonly, it is 3s case), which meets the requirements of visiting a patient at home and body examination.
Product category: Wearable technologies, smart textiles
Wearable SpO2/ECG Monitor CMS50K
Introduction:
CMS50K Wearable SpO2/ECG Monitor integrated functions of SpO2, ECG and pedometer in one product.
Main Features:
Display of SpO2 value
Display of pulse rate value
Display of heart rate value and ECG waveform
Display of step number and calorie
Low-battery indication
Data storage function
The data stored can be wireless uploaded to mobile terminal
Clock function
Charging function
CMS50K Wearable SpO2/ECG Monitor integrated functions of SpO2, ECG and pedometer in one product.
Main Features:
Display of SpO2 value
Display of pulse rate value
Display of heart rate value and ECG waveform
Display of step number and calorie
Low-battery indication
Data storage function
The data stored can be wireless uploaded to mobile terminal
Clock function
Charging function
Product category: Wearable technologies, smart textiles
Wearable SpO2/ECG Monitor CMS50K1
Introduction:
CMS50K1 is an intelligent device integrated SpO2, PR, ECG and pedometer measuring.
Function:
Display of SpO2 value.
Display of pulse rate value.
Display of heart rate value and ECG waveform.
Display of step number and calorie.
Low-battery indication.
Data storage function.
The data stored can be uploaded to mobile terminal by wireless mode.
Clock function.
Charging function.
Vibration prompt function
Data review function.
CMS50K1 is an intelligent device integrated SpO2, PR, ECG and pedometer measuring.
Function:
Display of SpO2 value.
Display of pulse rate value.
Display of heart rate value and ECG waveform.
Display of step number and calorie.
Low-battery indication.
Data storage function.
The data stored can be uploaded to mobile terminal by wireless mode.
Clock function.
Charging function.
Vibration prompt function
Data review function.
About us
Company portrait
Contec Medical Systems Co., Ltd. (hereinafter referred to as CONTEC) focusing on research, manufacture and distribution of medical instruments, was founded in 1996 as a high-tech company. CONTEC locates in Economic & Technical Development Zone in Qinhuangdao is one of the largest bases for R & D and production of medical devices.
CONTEC has been successfully listed in Shenzhen ChiNext Market on Aug 24, 2020.
CONTEC is dedicated to research, manufacture and distribution of medical devices, now we have developed more than 20-category products contained Pulse Oximeter, Sphygmomanometer, ECG, EEG, Ultrasound Equipment, Patient Monitor and Image Equipment,etc. And we have established a modern scientific and effective manufacture system and management system, independently designed and developed many advanced products, such as Pulse Oximeter, Electronic Sphygmomanometer, Blood Pressure Monitor, Arteriosclerosis Examine, 1-12-channel ECG, Portable ECG Monitor, ECG Workstation, Digital Brain Electric Activity Mapping, Dynamic EEG System, Pocket Fetal Doppler, B-ultrasound Diagnostic System, Sleep Apnea Screen Meter, Polysomnography Analysis System, Pulse Rate Meter, Spirometer, Urine Analyzer, Oxygen Concentrator, Patient Monitor and Multi-parameter Vital Signs Monitor, and we own more than 100 national patent, 56 software copyright, our products have passed CE, FDA and COS/VIOS certificate. At present, CONTEC products were distributed to over 130 countries and regions.
CONTEC adheres to the people-oriented, innovative development ideas, endeavors to achieve the goal of the international market, informative management, diversifiable product, we also dedicate to research and product high-tech products with more advanced in technology, more prefect in function, and more predominant in performance, to work CONTEC to a world-class modern enterprise.
CONTEC has been successfully listed in Shenzhen ChiNext Market on Aug 24, 2020.
CONTEC is dedicated to research, manufacture and distribution of medical devices, now we have developed more than 20-category products contained Pulse Oximeter, Sphygmomanometer, ECG, EEG, Ultrasound Equipment, Patient Monitor and Image Equipment,etc. And we have established a modern scientific and effective manufacture system and management system, independently designed and developed many advanced products, such as Pulse Oximeter, Electronic Sphygmomanometer, Blood Pressure Monitor, Arteriosclerosis Examine, 1-12-channel ECG, Portable ECG Monitor, ECG Workstation, Digital Brain Electric Activity Mapping, Dynamic EEG System, Pocket Fetal Doppler, B-ultrasound Diagnostic System, Sleep Apnea Screen Meter, Polysomnography Analysis System, Pulse Rate Meter, Spirometer, Urine Analyzer, Oxygen Concentrator, Patient Monitor and Multi-parameter Vital Signs Monitor, and we own more than 100 national patent, 56 software copyright, our products have passed CE, FDA and COS/VIOS certificate. At present, CONTEC products were distributed to over 130 countries and regions.
CONTEC adheres to the people-oriented, innovative development ideas, endeavors to achieve the goal of the international market, informative management, diversifiable product, we also dedicate to research and product high-tech products with more advanced in technology, more prefect in function, and more predominant in performance, to work CONTEC to a world-class modern enterprise.