Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
Please log in
You must be logged in to send the contact request.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
The Parker VSO® MAX HP series is a miniature high flow proportional valve that provides flow capabilities to meet your OEM application needs. The valve delivers a high range of controllable flow while consuming 25% less power than comparable miniature proportional valves, assisting with battery life savings. VSO® MAX HP Model 2 delivers a flow of 200 slpm at 45 PSI and is designed for higher range of operating pressures 120 psi (8.27 bar) commonly found on systems without a regulator. Model 4 delivers a flow of 180 slpm at 25 PSI and is designed for higher flow at lower pressure commonly found on systems with regulators. This translates to a smaller, sleek medical device design and offers potential savings and features three standard control voltage ranges (5, 12 and 24 VDC).
The Parker LM-Pro miniature proportional valve provides unparalleled flow control capabilities to meet your OEM application needs. The LM-Pro uses a patent pending linear motor actuation technology that provides exceptional resolution over a longer stroke and lower power consumption than traditional solenoid or voice coil actuation. With a linear controllable flow range from 0.5 to 540 slpm, pressure capability up to 100PSI (6.9 Bar), and typical power consumption of less than 2 watts, the LM-Pro is a true, one-size-fits-all proportional valve. This unrivaled performance capability combined with the simplicity of a face-mounted/ported design make the LM-Pro valve an ideal solution for your dynamic flow control needs.
The VSO® LowPro is a miniature proportional valve that controls the flow rate of inert gases at pressures up to 100 PSIG (6.9 bar). Typical flow rates up to 57 SLPM with a typical power requirement of 1 watt at room temperature. At just 16 mm wide by 14 mm tall, the valve can be populated into the smallest portable device improving performance, size and weight. With orifice sizes ranging from 0.030” (0.76 mm) up to 0.080” (2.03 mm) and a weight of 12 g, the VSO® LowPro can perform the function of valves three times its size without sacrificing any efficiency. The mounting only requires a simple machined manifold.
The X-Valve® is a miniature pneumatic solenoid valve measuring only 8 mm in width and is the ideal solution for portable applications with limited space and power. The body construction of the X-Valve® is suited for manifold or barbed-tube pneumatic connections and is available in 2-way normally closed and 3-way universal configurations.
The Ultra Low Carryover valve is a liquid valve that offers both an exceptionally low carryover performance and the ability to reduce fluidic circuit complexity by replacing one or more valves with a single Ultra Low Carryover Valve. Truly two valves in one.
The Parker R9 valve delivers the liquid flow capabilities of a 16 mm valve in a 9 mm envelope. The R9 valve includes a 44% reduction in width with unrivaled flows and pressures up to 100 psi. Designed to offer low carryover performance with particulate and crystallization resistance, this valve is ideally suited for todays demanding liquid handling applications. The R9 supports the performance requirements of current and future laboratory and portable instrumentation.
Parker's 49mm wide Helix delivers more than 5.5 LPM flow and pressure up to 100 PSI (6.9 bar). The Helix pump provides the best solution for bench-top diagnostic devices where performance is critical, and space is limited. The Helix enables high pressure operation in challenging high altitude environments and applications where external compressed air is not available.
Parker's 30mm wide BTX product series offer market leading reliability and flows up to 11 L/min. Parkers BTX-Connect pump product line combines best in class diaphragm pump design, innovative connected brushless motor technology, ultra-low vibration, and advanced manufacturing techniques to bring a next-generation solution to next-generation device needs.
Parker's T2-05 13.5 mm wide micro diaphragm pump is designed to fit where other pumps cannot due to its small, compact package size. The Parker T2-05 flow path is optimized to deliver high flow with high efficiency resulting in extended battery life. The pump's low power, small size, and light weight play a critical role in portable gas detection and medical applications. The T2-05 pump HE and LI pump models enable intrinsic safety capabilities for sampling of hazardous gases, typical of industrial and mining operations. The T2-05 IC pump is designed for compact and wearable medical devices that require less than 1500 hours of pump life. The Parker T2-05 VBIC model is ideal for vacuum only medical applications that benefit from improved sound quality, such as wound therapy.
Product category: Other components, modules, OEM equipment
X-Flow Mass Flow Controller
The Parker X-Flow™ is a streamlined Thermal Mass Flow Controller that controls flow from 0.8 ml/min to 20 l/min with a 1% accuracy & a max pressure of 145 PSIG. X-Flow™ delivers fast, repeatable and reliable high accuracy flow control through proven constant thermal by-pass mass measurement technology coupled with our unique digital communication protocols. X-Flow™ is calibrated to your specific conditions and includes the Parker Tracking system that assists with your annual asset calibration needs, delivering a higher level of productivity, efficiency and reliability.
Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For more than 100 years the company has engineered the success of its customers in a wide range of diversified industrial and aerospace markets. Parkers engineering expertise and broad range of core technologies uniquely positions the company to help solve the worlds greatest engineering challenges.
From the laboratory and operating room to home health care, Parker develops innovative solutions for health care success. With our application-engineered pneumatic and liquid control valves, diaphragm pumps, pressure controllers, and mass flow meters and controllers, Precision Fluidics Division enables technologies that improve lives.