Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
SABEU GmbH & Co. KG
Detlev-Karsten-Rohwedder-Str. 10,
37154
Northeim
Germany
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Media files
Contact
Dennis Benkmann
CEO
Dr. Andreas Hogrebe
VP Business Development Life Sciences
Vivian Monteban
Business Development Rapid Microbiology
Frank Kluge
Sales & Project Manager Life Sciences
Ines Müller
Inside Sales Manager Life Sciences & Medical
Lukas Müller
Marcom Manager
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 02 Laboratory technology
- 02.06 Filtration systems, filtration equipment
Filtration systems, filtration equipment
- 02 Laboratory technology
- 02.07 Glass, plastic, metal laboratory items
Glass, plastic, metal laboratory items
- 03 Diagnostic tests
- 03.01 Clinical chemistry
- 03.01.03 Urinalysis equipment and systems
Urinalysis equipment and systems
- 03 Diagnostic tests
- 03.02 Immunochemistry testing, immunology testing
- 03.02.02 Diagnostic rapid tests
Diagnostic rapid tests
- 03 Diagnostic tests
- 03.02 Immunochemistry testing, immunology testing
- 03.02.03 Diagnostic tests for cancer
Diagnostic tests for cancer
- 03 Diagnostic tests
- 03.03 Haematology / histology / cytology testing
- 03.03.04 Other haematology / histology / cytology testing
Other haematology / histology / cytology testing
- 03 Diagnostic tests
- 03.04 Microbiology testing
- 03.04.03 Rapid tests in microbiology
Rapid tests in microbiology
- 03 Diagnostic tests
- 03.04 Microbiology testing
- 03.04.04 Other microbiology testing
Other microbiology testing
- 03 Diagnostic tests
- 03.05 Infectious immunology testing
- 03.05.02 Microbiological diagnosis, virology, equipment and systems for
Microbiological diagnosis, virology, equipment and systems for
- 05 Commodities and consumer goods
- 05.07 Disposables
- 05.07.02 Disposable articles for laboratories
Disposable articles for laboratories
- 05 Commodities and consumer goods
- 05.10 Catheters / urinary catheters and accessories
Catheters / urinary catheters and accessories
Our products
Product category: Filtration systems, filtration equipment, Glass, plastic, metal laboratory items, Disposable articles for laboratories
cellQART® Cell Culture Inserts
With our cellQART® Cell Culture Inserts we are dedicated to resolve the dilemma of customer needs for innovative cell culture products meeting highest standards at affordable prices.
This product portfolio will come with PET membranes in translucent or clear optics and 6-, 12- or 24-Well format which is compatible with most standard Cell Culture Plates. Our standard portfolio includes pore sizes from 0.4 μm to 8.0 μm with various pore densities.
Project based customization (especially alternative membranes, e.g. black colored or further pore sizes) is possible due to 100 % in-house production of plastics & membrane components.
All Inserts are TC treated and gamma sterilized in general as well as RNase / DNase free and non-pyrogenic. With our industry leading quality standards we ensure 100 % membrane parameter consistency for reproducible cell culture results.
Benefits:
This product portfolio will come with PET membranes in translucent or clear optics and 6-, 12- or 24-Well format which is compatible with most standard Cell Culture Plates. Our standard portfolio includes pore sizes from 0.4 μm to 8.0 μm with various pore densities.
Project based customization (especially alternative membranes, e.g. black colored or further pore sizes) is possible due to 100 % in-house production of plastics & membrane components.
All Inserts are TC treated and gamma sterilized in general as well as RNase / DNase free and non-pyrogenic. With our industry leading quality standards we ensure 100 % membrane parameter consistency for reproducible cell culture results.
Benefits:
- Affordable prices – buy directly from the true OEM
- Unique 100 % membrane parameter consistency for reproducible cell culture results
- Broad standard portfolio and customization – Ensured by complete in-house plastics & membrane production
Product category: Filtration systems, filtration equipment, Glass, plastic, metal laboratory items, Diagnostic rapid tests, Rapid tests in microbiology, Other microbiology testing, Microbiological diagnosis, virology, equipment and systems for, Disposable articles for laboratories
TRAKETCH® Filter Membranes for rapid microbiological tests (Rapid Microbiology)
Using the membrane filter method, a sample is filtered through a TRAKETCH® membrane. All microorganisms in a 100 ml sample solution are concentrated and retained completely (100%) on the membrane surface.
Detection is performed directly on the membrane by adding a fluorescent dye which can only penetrate through intact cell walls (living organisms). To ensure adequate measurement of the emitted fluorescence after stimulation by a laser, the membrane should have a low fluorescence. Otherwise we would see "a white image on a white background", i.e. we would only see a fluorescence of the entire surface.
To avoid this, SABEU stains this membrane in deep black to quench the fluorescence in defined ranges of wavelengths. This entire microbiological detection method is called solid phase cytometry, in which the membrane represents the solid phase. This method is not only rapid, but also in real time, i.e. within just 1–2 hours. In comparison, the growth of microcolonies takes 1–2 days, whereas growing visible colonies takes 1–2 weeks, depending on the microorganism.
Benefits:
Detection is performed directly on the membrane by adding a fluorescent dye which can only penetrate through intact cell walls (living organisms). To ensure adequate measurement of the emitted fluorescence after stimulation by a laser, the membrane should have a low fluorescence. Otherwise we would see "a white image on a white background", i.e. we would only see a fluorescence of the entire surface.
To avoid this, SABEU stains this membrane in deep black to quench the fluorescence in defined ranges of wavelengths. This entire microbiological detection method is called solid phase cytometry, in which the membrane represents the solid phase. This method is not only rapid, but also in real time, i.e. within just 1–2 hours. In comparison, the growth of microcolonies takes 1–2 days, whereas growing visible colonies takes 1–2 weeks, depending on the microorganism.
Benefits:
- Quantitative filtration through surface filter
- Low autofluorescent deep black membrane
- Smooth membrane surface for easy transfer of cells
Product category: Filtration systems, filtration equipment, Glass, plastic, metal laboratory items, Urinalysis equipment and systems, Diagnostic tests for cancer, Other haematology / histology / cytology testing, Disposable articles for laboratories
TRAKETCH® Filter Membrane for pap smears to diagnose HPV
Conventional pap smears quickly reach their limitations as the thickness of the smear layer can vary. Irregularities in processing the samples can be avoided thanks to product solutions in the field of thin-layer cytology, which are made possible by our TRAKETCH® membranes.
The cylinder is turned upside down during the cell transfer, so the sample is transferred to the microporous membrane on the slide. Air pressure from the other side of the membrane filter as well as the hydrophilic surface of the TRAKETCH® membranes assist the transfer of the cells from the membrane to the slide.
The cylinder is turned upside down during the cell transfer, so the sample is transferred to the microporous membrane on the slide. Air pressure from the other side of the membrane filter as well as the hydrophilic surface of the TRAKETCH® membranes assist the transfer of the cells from the membrane to the slide.
Product category: Filtration systems, filtration equipment, Catheters / urinary catheters and accessories
TRAKETCH® Filter Membranes for venting applications
Sterile venting is mostly indispensable in Life Sciences and Medical settings.
The lab environment needs to be protected against microorganisms – but conversely, living microorganisms also need to be protected against contamination from the outside. It is also vital to ensure that no microorganisms can enter patients through the contact with medical devices. At the same time, openings in these devices to the outside need to be equipped with sterile air filters in order to protect the environment against potential contamination.
Our TRAKETCH® PET 0.2 VENT meets these requirements in several respects. First, this filter membrane provides a reliable barrier against even the smallest microorganisms, both in liquids and in air. Second, the VENT membrane keeps out liquids thanks to its super-hydrophobic (oleophobic) surface, that is PFOA-free, of course.
In addition, TRAKETCH® Membranes are not only biocompatible as per USP Class VI but are also stable against all sterilization methods, including gamma irradiation. Their extremely smooth surface also causes liquids to form droplets and run off the membrane, for example in the lid of cell culture containers, so that the membrane always stays dry, ensuring the necessary sterile air venting. This example of an application for cell cultures is just one of many.
The lab environment needs to be protected against microorganisms – but conversely, living microorganisms also need to be protected against contamination from the outside. It is also vital to ensure that no microorganisms can enter patients through the contact with medical devices. At the same time, openings in these devices to the outside need to be equipped with sterile air filters in order to protect the environment against potential contamination.
Our TRAKETCH® PET 0.2 VENT meets these requirements in several respects. First, this filter membrane provides a reliable barrier against even the smallest microorganisms, both in liquids and in air. Second, the VENT membrane keeps out liquids thanks to its super-hydrophobic (oleophobic) surface, that is PFOA-free, of course.
In addition, TRAKETCH® Membranes are not only biocompatible as per USP Class VI but are also stable against all sterilization methods, including gamma irradiation. Their extremely smooth surface also causes liquids to form droplets and run off the membrane, for example in the lid of cell culture containers, so that the membrane always stays dry, ensuring the necessary sterile air venting. This example of an application for cell cultures is just one of many.
About us
Company portrait
Tailor-made solutions, mature standards
We are a leading system provider of microporous filter membranes and injection molded components. Founded in 1958 by the Sander-Beuermann family, we have two plants in Germany today and are part of the family owned Altenloh, Brinck & Co. Group with above 1,600 employees around the world and combined sales of more than $ 370 million.
Injection molding and filtration are our passion
In these areas we develop products based on customer specifications, manufacture serial products and set own standards with our cellQART®, FLUXX® and TRAKETCH® product lines — all Made in Germany.
Markets we serve
We are cooperating with our customers to resolve current challenges and offer best solutions in Life Sciences, Medical, Packaging and further Industries. Thanks to this cooperative approach and the steadily growing know-how, we have been
successful on the market for decades and are optimally prepared for the future.
Our portfolio of expertise
We are a leading system provider of microporous filter membranes and injection molded components. Founded in 1958 by the Sander-Beuermann family, we have two plants in Germany today and are part of the family owned Altenloh, Brinck & Co. Group with above 1,600 employees around the world and combined sales of more than $ 370 million.
Injection molding and filtration are our passion
In these areas we develop products based on customer specifications, manufacture serial products and set own standards with our cellQART®, FLUXX® and TRAKETCH® product lines — all Made in Germany.
Markets we serve
We are cooperating with our customers to resolve current challenges and offer best solutions in Life Sciences, Medical, Packaging and further Industries. Thanks to this cooperative approach and the steadily growing know-how, we have been
successful on the market for decades and are optimally prepared for the future.
Our portfolio of expertise
- Development
- Tool shop
- Injection molding
- Membrane manufacturing
- Clean room assembly
- Packaging & sterilization
Company data
Sales volume
10-49 Mio US $
Number of employees
100-499
Foundation
1958
Area of business
- Imaging and diagnostics / medical equipment & devices
- Laboratory equipment
- Diagnostics
- Disposables and consumables
