Möller Medical GmbH of Fulda at COMPAMED 2020 in Düsseldorf -- MEDICA - World Forum for Medicine
Manage stand orders
Select Option

Möller Medical GmbH

Wasserkuppenstr. 29-31, 36043 Fulda
Telephone +49 661 941950
Fax +49 661 94195850

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.


Torsten Müller

General Manager / Head of Medical Devices

+49 661 941 95 0


Michael Frank

Head of OEM Business

+49 661 941 95 115


Ingmar Bott

Head of Development HW/SW

+49 661 941 95 140


Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 01  Manufacturing of components
  • 01.01  Electronic manufacturing services (EMS)
  • 01.01.04  Elektronics assembly

Elektronics assembly

  • 01  Manufacturing of components
  • 01.02  Plastics processing
  • 01.02.01  Injection molding

Injection molding

  • 01  Manufacturing of components
  • 01.04  Metal machining processing
  • 01.04.03  Metal cutting, chip removal

Metal cutting, chip removal

  • 01  Manufacturing of components
  • 01.05  Surface treatment
  • 01.05.03  Surface coating
  • 01  Manufacturing of components
  • 01.06  Laser processing
  • 01.06.01  Laser cutting

Laser cutting

  • 01  Manufacturing of components
  • 01.06  Laser processing
  • 01.06.02  Laser welding

Laser welding

  • 02  Manufacturing of finished products
  • 02.03  Cannula
  • 02  Manufacturing of finished products
  • 02.05  Needles


  • 02  Manufacturing of finished products
  • 02.09  Electromedical devices
  • 02  Manufacturing of finished products
  • 02.12  Dental products

Dental products

  • 02  Manufacturing of finished products
  • 02.16  Laboratory technologies
  • 02.16.03  Liquid handling
  • 03  Services
  • 03.04  Design and development
  • 03.04.01  Product design, product development
  • 03  Services
  • 03.05  Assembly


  • 05  Components, modules, OEM equipment
  • 05.05  Pumps

Our products

Product category: Product design, product development



Möller Medical is a growing group of people with well-educated knowledge, long lasting experience and a large variety of skills sharing the ONE PASSION to transform your task to the best possible solution.

Based in the middle of Germany, no borders, oceans, languages, time zones or cultures can hold us back from supporting our customers. Starting from the first idea and going over product development, sample- and badge production, to regulatory and quality management and up to after-sales support – you can have it all from us – under one roof.

More Less

Product category: Electromedical devices, Product design, product development



Möller Medicals significant ability to unite all core competences in product development and manufacturing services under one roof already convinced customers for decades.

A modular system allows fast time-to-market. Paired with a strong network of specialists, research institutes and key opinion leaders these are some of the qualifications we are leading our customers to their success:

· Embedded System Engineering
· Design Study und additives Prototyping
· Design to Manufacturing and Design to Cost
· Technology Scouting

Möller Medical develops components starting from one piece up to high volumes. We use established technologies and have sound experience in:

· Laser technology
· Surface technology
· Bonding technology
· Precision mechanics for kinematic Systems
· Housing technology


With prototype construction, test department, production, assembly and service in our own company, the end product is not only considered theoretically during development, but also with the supportive knowledge of experts and their perspectives, the suitability for everyday use over the product life cycle is taken into account.


Based in the middle of Germany, no borders, oceans, languages, time zones or cultures can hold us back to put all our knowledge, experience and manpower to lead your tasks to the best solution.

We create adaptable designs for international markets. Our customers are market leaders based in the EU or in global companies.

More Less

Product category: Liquid handling

Liquid Handling Systems


Since several decades we have been manufacturer of high-quality analytical needles and connection systems. Working closely together with the customers to develop solutions exactly machting their needs is our speciality.
Our expertise in the field of metal and plastics processing have already been beneficial for well-known manufacturers in the analytical industry.

  • Straight simple needles
  • Multiple channel needles
  • Cap piercing needles
  • Heated needles
  • Steel needles with integrated PTFE/FEP tubes®


In addition we offer complete, also heatable® technical tubing systems with three different connection mechanisms:
  • V1 simple
  • V2 reduced dead water®
  • V3 dead water free®
Our processes allow us to create dead water free connection between steel needle and tubing systems as well as between plastic components and tubing systems.

The TorqFit fitting series were developed to limit the tightening torque of the fittings to 12-15 Ncm. This ensures no damage is caused in the connection area by overtightening. The design and all parameters can be customized.


  • Precision injection molding of a wide variety of plastics, including autoclavable plastics (PEEK, PVDF, etc.) with own toolmaking for injecting and overmolding of components
  • Drilling, cutting, welding and marking by Laser
  • Ultrasonic welding and special designs in membrane joining technology
  • Automated 3D free-form bending
  • In-house toolmaking for highest competence and flexibility for the customer
  • Quality control by using modern measuring and analysis methods


The Superfinish® patented by Möller Medical achieves very smooth inner surfaces with Ra-values to 0.10 µm for pipe geometries down to 0.3 mm x 200 mm.
We also offer high-quality coatings for our needles.

More Less

Product category: Pumps


Möller Medical peristaltic pumps are perfectly suitable for pumping sensitive, highly viscous, aggressive liquids as well as liquids containing suspended particles or contaminated liquids.
Our engineering development team supports you from the early concept design phase according to your demand.

Next to offering a wide range of standard products, our SPQ® can also provide individual solutions according to your needs.
Customized variants of our roller pumps are even available for small quantities.
And of course we offer standard-tube sets as well as customized tube systems suitable for your roller pumps.

  • very small flow rates
  • low-pulsation conveyance
  • reversible funding
  • low-maintenance
  • safe to run dry
  • self-priming
  • for continuous operation
  • valveless
  • adjustable delivery rate

  • Medical Technology
  • Biotechnology
  • Pharmacy
  • Analytics/ Diagnostics
  • Laboratory
  • Food and beverages
  • Water- / waste water / environmental technology
  • Chemistry
  • Air conditioning / heating
  • Industry

More Less

Product category: Liquid handling



High Performance Liquid Chromatography for chemical analysis and separation of mixed substances is used millions of times a year and belongs to the standard repertoire of every modern laboratory in research and industry.
Möller Medical commands 35 years of experience in HPLC hardware. We regard ourselves as problem solver and systems manufacturer for our clients, whom we support from the development phase until series production.

  • A large selection of HPLC hardware
  • Customized hardware by your specifications and quality requirements
  • One-stop shopping: All products and critical process steps from one supplier
  • Joint venture from idea to product

More Less

Product category: Cannula


Get to know our decades of experience in development and production of special needles for use in human medicine.
Together with our customers and users we develop needles with special tip types and fully new needle and cannula shapes.

Due to our diverse machine park and large stock of raw materials, we can produce diverse needle tips and undertake various surface treatments (e.g. roughening, grooves or swaging) in many different materials and diameters.
One of our strengths is connecting metal and plastic using overmoulding techniques.

The final cleaning process of our products for medical use takes place in a validated cleaning machine, from which the parts enter our cleanroom (class 100.000) through an air lock. Assembly and final packaging of the products takes place here.

We are able to implement various gluing processes to combine metal with plastics, glass, other metals or other materials, including UV- and heat-curing glue types.

If required we can carry out sterilization with Ethylene Oxide before stocking / shipping.

Products, whether sterile or bulk-packed (in double PE-bags), are kept in a paternoster system ready for shipping.

Our needle tips are used in the following medical disciplines:
  • Radiology
  • Pain control
  • Reproductive medicine
  • Urology
  • Trauma / Implantology
  • Anaesthesia
  • Biopsy
  • Aesthetic medicine or for taking blood samples

For Radiology / Diagnostics:
  • Bone biopsy needle
  • Bone marrow biopsy needles
  • Liver biopsy needles
  • Brain biopsy needles
  • Franseen instrument
  • Coaxial needle
  • Chiba needle
  • Chiba ULTRA (particularly long tip)
  • Hepatic lobule needle
  • Kidney biopsy needle
  • Pleurapunction needle
For Reproductive medicine / prenatal diagnostics:
  • Oocyte retrieval needles
  • Ovum-Pick-Up
  • Amniocentesis needle
  • Needle for Chorionic villus sampling
For Trauma / Implantology:
  • Vertebroplasty needles
  • Vertebroplasty Instruments
  • Titanium spinal Implants
For preparing medication / blood sampling:
  • Venting needle
  • Filter needle
  • Cap-piercing needle
For Anaesthesia:
  • Needle for spinal anaesthesia
For Pain control:
  • Stimulisation needle
For General Medicine:
  • Initial puncture needle
  • Needle with echogenic tip
  • Needle with lancet point
  • Needle with quincke tip
  • Needle / Tube adapter
  • Pencil-Point needle
  • Percutaneous insertion needle
  • Blood donation set
  • Double lumen puncture needle
  • Seldinger needle
  • Acupuncture needle
  • Stylet
Other intstruments:
Cleaning brush for rectal puncture instrument
Stiffening needle
Guide tube for catheter
Unroller for catheter

More Less

Product category: Surface coating


If you are looking for special coatings we can offer a range of different coatings for various applications:

  • NanoSkin: sol-gel coatings
  • TafSkin: coatings with teflon/ teflon-like additives
  • PolySkin: functional polymer coatings
  • HardSkin: hard coatings for tools and pre-piercing needles

More Less

Product category: Cannula

BiopC® Interventionell

The well known product line BiopC® is based upon decades of experience in developing and manufacturing all kinds of cannulae and needles for human medicine as well as special products in the field of intensive care.

Creating high quality products with utmost respect for the patient’s well-being is our core concept. This principle guided the development of the BiopC® product range and will remain a determining factor in further development of the product portfolio.

With our BiopC® products we can cover a broad range of applications.

More Less

Product category: Electromedical devices

Aesthetic Surgery

Möller Medical Aesthetics Solutions enables you and your team to create an optimal practice workflow. All products are excellently coordinated, providing you with state-of-the-art technology, safety and outstanding results, guaranteed.

The combination of Möller Medical Aesthetics Solutions, which are perfectly matched with each other, enables you to achieve the best possible results with highly viable fat cells during fat transfer. Please also read our current in-vitro-analysis.

Möller Medical products help maximize accuracy in procedures, establish simple workflows and equip your practice with the latest technology to meet the ever-changing needs of the future.

More Less

Product category: Electromedical devices

CSF Management

Are you handling CSF? Meet LiquoGuard®!

LiquoGuard® is a revolutionary step in cerebrospinal fluid (CSF) management. By using it you can maximize the safety of drainage, increases patients well-being, reduce treatment costs  and take advantage of an earlier patients mobilization.
The device supports the clinical personnel and helps saving time in the routine workflows.
While doing so, LiquoGuard® is the only CSF management system in the world that drains and simultaneously measures CSF pressure under controlled circumstances.

The product line consists of LiquoGuard® 7 and the extensive offering of accessories and consumables. The system handle fully automatic, volume-controlled or pressure controlled CSF drainage, and on request, also the infusion of fluid for support of normal pressure hydrocephalus (NPH) diagnosis. 

In addition to all LiquoGuard® functions, LiquoGuard® 7 offers a number of new features that further increase patient safety and application safety, significantly reduce the number of alarm situations, facilitate evaluation of data, and enable connection to other systems (e.g. external ICP sensor or parenchyma sensor, printer, internal building call system).

More Less

Product category: Electromedical devices

Blood Mixing Scales

The Docon® 7 represents the systematic evolution of the blood mixing scales that have been developed and produced by Möller Medical for more than 40 years. It is established in both national and international markets.


  • Enhanced safety, more robust design and greater user friendliness
  • Colour display with a touchscreen
  • Touchless tube identification
  • Use of antibacterial plastics
  • Self-regulating clamping
  • Protected scale pan, magnetic fixation
  • Rechargeable battery system
  • Seal option
  • Integrated charging device
  • Data management using USB, LAN and WLAN
The device can also be fully configured to meet customers’ needs.


The Docon can be incorporated into conventional WLAN networks that meet the current standard to transfer donor data to a PC.
Combined with the new DMS PC software, Docon can also be fully configured for online monitoring of blood mixing scales and bidirectional communication.


The Seal Option enables tubing systems to be sealed during and after donation at the donor chair with the utmost safety in order to prevent contamination of the blood donation. The procedure can be documented in the donor data set.

More Less

Product category: Product design, product development

Quality Management and Regulatory Affairs


Möller Medical is the right partner for european and worldwide market approvals for medical devices. Based on many decades of experience, a highly qualified team of experts is working in close business relationship with customers, authorities and distribution partners.

Möller Medical can function flexibly to meet your requirements. We can operate as a manufacturer in regulatory sense on the one hand as well as supporting our customers in the process of gaining their own medical approval on the other hand.


We deliver finished medical devices as well as components to our distributors and OEM customers. Customer satisfaction and compliance with all applicable legal, normative and regulatory requirements are the focus of our quality management system. To meet this requirement, Möller Medical has established a comprehensive quality management system. We hold the following certificates:

  • QM system according to MDSAP (including the country-specific requirements of USA, Brazil, Canada and Austral
  • QM system according to ISO 13485
  • QM system according to ISO 9001
  • Quality assurance system according to EC Directive 93/42 / EEC


The CE marking on the product gives notice to market surveillance authorities and end users that the product meets the essential requirements of applicable EU directives. The CE marking is also visible evidence by which a manufacturer guarantees liability for the conformity of the product. The CE conformity assessment procedure is carried out according to:

  • Annex II of EC Directive 93/42 / EEC
  • Annex V of the EC Directive 93/42 / EEC

The MDR (Medical Device Regulation (EU) 2017/745) is a great challenge for all manufacturers and suppliers in the medical device industry. We are happy to meet this challenge and have already planned our MDR certification audit for early 2021. Therefore we are confident that we will be able to prove MDR conformity at the latest by the time the MDR comes into force.


We have a wide range of manufacturing technologies and can therefore map much of the value chain in our business. The ambient conditions are always consistently tailored to the requirements of medical technology.

  • Clean room production according to ISO 14644, ISO class 8


Intensive development work is constantly creating innovations that are protected by around 30 patents and utility models.

More Less

About us

Company portrait

Möller Medical was founded in 1949. In addition to standard precision mechanical products, components and finished devices for precision engineering, medical technology and analytics, the Fulda-based company offers CNC laser processing, clean room production and nanocoating technology.

Möller Medical is particularly present in the demanding OEM business and is a supplier to well-known companies in the medical technology and analytical industries. The company is a certified manufacturer of assemblies and end products.


Company data

Area of business
  • Components, parts, modules, Original Equipment Manufacturers
  • Electrical and electronic components
  • Tubings and tubing equipment
  • Pumps
  • Catheters
  • Needles
  • Equipment and technologies for laboratories and manufacturing
  • Manufacturing Services
  • Services