Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
FISIOLINE SRL
Borgata Molino, 29,
12060
Verduno (CN)
Italy
Italy
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Contact
ELEONORA BATTAGLIOTTI
Marketing and Comunication
ROMINA GALLO
Export department
MARZIA BARBERO
Export Department
Visit us
16.11.2020
Topic
all-day
17.11.2020
Topic
all-day
18.11.2020
Topic
all-day
19.11.2020
Topic
Our range of products
Product categories
- 01 Electromedical equipment / medical technology
- 01.03 Surgery devices, endoscopy devices
- 01.03.11 Laser surgery equipment
Laser surgery equipment
- LUMIX® SURGERY DUAL Dental, the dental laser with dual modality use for Surgery and Therapy
- LUMIX SURGERY, surgical laser powerful and versatile for multiple applications
- LUMIX® Q Platform, innumerable possibilities in Surgery and in Therapy, thanks to Nd:YAG Q-Switched laser platform
- LUMIX® SURGERY Veterinary, Laser Surgery and Microsurgery for animals
- LUMIX® SURGERY DUAL Veterinary, Surgery and Therapy all in one laser for animals
- 01 Electromedical equipment / medical technology
- 01.04 Therapy and physical medicine
- 01.04.06 Laser therapy equipment
Laser therapy equipment
- LUMIX Q: Nd:YAG Q-Switched high power Laser with nanotechnology. The most powerful Nd:YAG therapeutic Laser in Physiotherapy and Rehabilitation.
- LUMIX® PLUS and LUMIX® Ultra with HIGH POWER version Continuous,Pulsed and Superpulsed laser C.P.S.®
- LUMIX C.P.S. The portable laser Continuous, Pulsed and Superpulsed
- LUMIX® 2. HIGH FREQUENCY POWER LASER.
- LUMIX® CW CONTINUOUS AND FREQUENCED LASER
- LUMIX® C.P.S.® Podiatry. LASER FOR PODIATRIC APPLICATIONS Innovative high power multi-diode laser for podiatry with C.P.S.® emission (Continua, Pulsata e Superpulsata) properly designed and realized to satisfy the Podiatrist’s needs.
- LUMIX SURGERY, surgical laser powerful and versatile for multiple applications
- LUMIX® Q Platform, innumerable possibilities in Surgery and in Therapy, thanks to Nd:YAG Q-Switched laser platform
- Lumix® Epil Med Dual version, the new multi-wavelength diode laser for epilation
- Lumix® Epil Med Power Plus version, the new high power diode laser 808 nm for epilation
- Lumix® Epil Med, high speed diode laser 808nm for Hair removal
- LUMIX® C.P.S.® Veterinary, Laser Therapy helpful to animals
- LUMIX® SURGERY DUAL Veterinary, Surgery and Therapy all in one laser for animals
- 04 Physiotherapy / orthopaedic technology
- 04.08 Physiotherapy equipment
Physiotherapy equipment
- Fisioline RADIANT® Monopolar – Bipolar – Tripolar systems for T.E.C.A.R. Therapy
- FISIOSONIC® the multifrequency ultrasound in class E
- FISIOSONIC® PLUS the multifrequency ultrasound in class E
- MODULO and MODULO PLUS Electrotherapy
- LINFOPRESS MASTER Pressure Therapy
- LINFOPRESS STUDIO Pressure Therapy
- FISIOFIELD MAXI innovative technology in magnetotherapy
- FISIOFIELD MIDDLE Magnetotherapy
- FISIOWAVE innovative technology in radar therapy
- FISIOSONIC® Veterinary, the multifrequency ultrasound in class E for lesions and muscle contractures of animals
- Fisioline RADIANT® Veterinary, Monopolar – Bipolar – Tripolar systems for T.E.C.A.R. Therapy for animals
- O.P.A.F.® THERAPY Veterinary the High-frequency soundproof Pressure Waves for animals
- FISIOFIELD MIDDLE Veterinary, magnetotherapy for musculo-skeletal pathologies on animals
- O.P.A.F.® THERAPY: High-frequency Pressure Waves
Our products
Product category: Laser therapy equipment
LUMIX Q: Nd:YAG Q-Switched high power Laser with nanotechnology. The most powerful Nd:YAG therapeutic Laser in Physiotherapy and Rehabilitation.
From nanotechnology a revolutionary laser for a 360-degree therapy.
LUMIX® Q is the latest Fisioline® innovation derived from over 30 years of scientific research, design and production made in Italy at the forefront of the latest generation Laser technologies.
A unique technology, extremely performing and effective in achieving therapeutic goals in short time.
The unique features of LUMIX® Q
The exclusive Nd:Yag Q-Switched System (1064nm) adopted by Fisioline®allows to combine peculiar characteristics such as the highest peak power ever achieved by a Laser in Physical Therapy (up to 130kW) and the high average power (up to at 20W), making LUMIX® Q a powerful, extremely performing and unique laser.
The high peak power and the high average power that reaches allow for a large and adjustable volumetric involvement of the treated area with the administration of a large amount of energy in depth, ensuring a particularly high tissue penetration.
LUMIX® Q brings innumerable advantages
LUMIX® Q is the latest Fisioline® innovation derived from over 30 years of scientific research, design and production made in Italy at the forefront of the latest generation Laser technologies.
A unique technology, extremely performing and effective in achieving therapeutic goals in short time.
The unique features of LUMIX® Q
- Power: 130kW = 130.000W
- Average Power: 20W
- Pulse: from 7ns up 35ns
- Superpulsation: up to 100.000Hz
- immediate analgesic effect
- depth of action never reached before
- quick results
- safety in the treatment
- broad spectrum of therapeutic indications
The exclusive Nd:Yag Q-Switched System (1064nm) adopted by Fisioline®allows to combine peculiar characteristics such as the highest peak power ever achieved by a Laser in Physical Therapy (up to 130kW) and the high average power (up to at 20W), making LUMIX® Q a powerful, extremely performing and unique laser.
The high peak power and the high average power that reaches allow for a large and adjustable volumetric involvement of the treated area with the administration of a large amount of energy in depth, ensuring a particularly high tissue penetration.
LUMIX® Q brings innumerable advantages
- Extremely fast learning curve thanks to the Wizard and the Lumix® Assistant
- Operative training available 24 hours a day by all operators thanks to the Audio-Video Application Tutorials present within LUMIX® Q
- Reduced treatment times, for fast therapies that can treat a greater number of patients
- Having an extracompact and transportable Nd: Yag technology
Product category: Laser therapy equipment
LUMIX® PLUS and LUMIX® Ultra with HIGH POWER version Continuous,Pulsed and Superpulsed laser C.P.S.®
LUMIX® Plus and LUMIX® Ultra are innovative high power multidiode lasers with C.P.S.®(Continuous, Pulsed and Superpulsed) emission that performs effective photobiostimulation in Physiotherapy, Rehabilitative Medicine, Sports Medicine and Orthopedic fields.
Specifications
The highest peak power: from 300W to 1800W
Average power: from 10W to 35W
Up to 5 available wavelengths
The real superpulsation: up to 100,000Hz
Nanotechnology: Nanoimpulses of 70ns
The multi wavelength C.P.S.® system
The multi wavelength of the LUMIX® Plus and LUMIX® Ultra, the high peak power (from 300W e 1800W) and the high average powers that reach 35W allow for large volumetric treatments with high amount of energy deep into tissues.
Wavelength and peak power are among the essential factors for deep tissue penetration. It is important that the laser has a wavelength that falls within the so-called “THERAPEUTIC WINDOW”: LUMIX® Plus and LUMIX® Ultra emit wavelengths from 650nm to 1064nm and the peak power of LUMIX® Plus e LUMIX® Ultra ranges from 300W to 1800W.
The exclusive C.P.S.® system created by Fisioline® mixes the emissions of different types of laser sources to integrate special characteristics such as high peak power of superpulsed sources and the high average power of the continuous sources. The integration is done with the available continuous sources making LUMIX® Plus and LUMIX® Ultra laser a powerful and extremely performing lasers.
The real superpulsation
The use of high pulsation frequencies (over 30 KHz: Superpulsation) exploits a new physical phenomenon: the photomechanical effect, that is the transformation, at a molecular level, of the luminous EM energy into mechanical energy. This can accentuate, at the same wavelength and power, the effects both on the conduction structures, that is on the muscle tissue (decontraction) and nervous (antalgia), and on the fibrose tissue (increase elasticity).
The wide range of frequency adjustment (from 1Hz to 100.000Hz) makes LUMIX® Plus and LUMIX® Ultra one-of-a-kind lasers. The superpulsation (from 30.000Hz to 100.000Hz) is the main feature in laser photobiostimulation to induce bone and cartilage growth, as attested by scientific publications carried out with Fisioline® lasers.
The size of the output spot has a considerable importance. This is the surface where the laser radiation is evenly distributed (power density in W/cm2). The larger the spot size, with the same power density, the higher the laser penetration in the tissues, thanks to the scattering sum.
The spot of LUMIX® Plus and LUMIX® has a diameter ranging from about 2 cm to more than 6 cm, using appropriate spacers. These characteristics allow the lasers LUMIX® Plus and LUMIX® Ultra to carry laser and thermal energy deep in the tissues.
Multi wavelength. Wavelengths selected to ensure the uniformity of energy distribution from the surface layers to the deeper layers.
Combination and synchronisation. The synchronisation and combination of different types of continuous, pulsed and superpulsed sources allows for direct intervention both on symptomatology and on the cause of diseases.
Overlapping: single spot. Optically overlapping diodes mixed with optical fibers to implement homogeneous irradiation on one point.
Reduced times
The high energy density, the different biostimulation of the different wavelengths and the thermal effect obtained with LUMIX® Plus and LUMIX® Ultra allow the user to work with extremely fast treatments, reducing the number of applications.
Effective, safe and customizable therapy
Specifications
The highest peak power: from 300W to 1800W
Average power: from 10W to 35W
Up to 5 available wavelengths
The real superpulsation: up to 100,000Hz
Nanotechnology: Nanoimpulses of 70ns
The multi wavelength C.P.S.® system
The multi wavelength of the LUMIX® Plus and LUMIX® Ultra, the high peak power (from 300W e 1800W) and the high average powers that reach 35W allow for large volumetric treatments with high amount of energy deep into tissues.
Wavelength and peak power are among the essential factors for deep tissue penetration. It is important that the laser has a wavelength that falls within the so-called “THERAPEUTIC WINDOW”: LUMIX® Plus and LUMIX® Ultra emit wavelengths from 650nm to 1064nm and the peak power of LUMIX® Plus e LUMIX® Ultra ranges from 300W to 1800W.
The exclusive C.P.S.® system created by Fisioline® mixes the emissions of different types of laser sources to integrate special characteristics such as high peak power of superpulsed sources and the high average power of the continuous sources. The integration is done with the available continuous sources making LUMIX® Plus and LUMIX® Ultra laser a powerful and extremely performing lasers.
The real superpulsation
The use of high pulsation frequencies (over 30 KHz: Superpulsation) exploits a new physical phenomenon: the photomechanical effect, that is the transformation, at a molecular level, of the luminous EM energy into mechanical energy. This can accentuate, at the same wavelength and power, the effects both on the conduction structures, that is on the muscle tissue (decontraction) and nervous (antalgia), and on the fibrose tissue (increase elasticity).
The wide range of frequency adjustment (from 1Hz to 100.000Hz) makes LUMIX® Plus and LUMIX® Ultra one-of-a-kind lasers. The superpulsation (from 30.000Hz to 100.000Hz) is the main feature in laser photobiostimulation to induce bone and cartilage growth, as attested by scientific publications carried out with Fisioline® lasers.
The size of the output spot has a considerable importance. This is the surface where the laser radiation is evenly distributed (power density in W/cm2). The larger the spot size, with the same power density, the higher the laser penetration in the tissues, thanks to the scattering sum.
The spot of LUMIX® Plus and LUMIX® has a diameter ranging from about 2 cm to more than 6 cm, using appropriate spacers. These characteristics allow the lasers LUMIX® Plus and LUMIX® Ultra to carry laser and thermal energy deep in the tissues.
- Automatic treatment with spacers according to the area to treat
- Articulated arm
- Spacers according to the area to treat (diameter 30 and 60mm)
Multi wavelength. Wavelengths selected to ensure the uniformity of energy distribution from the surface layers to the deeper layers.
Combination and synchronisation. The synchronisation and combination of different types of continuous, pulsed and superpulsed sources allows for direct intervention both on symptomatology and on the cause of diseases.
Overlapping: single spot. Optically overlapping diodes mixed with optical fibers to implement homogeneous irradiation on one point.
Reduced times
The high energy density, the different biostimulation of the different wavelengths and the thermal effect obtained with LUMIX® Plus and LUMIX® Ultra allow the user to work with extremely fast treatments, reducing the number of applications.
Effective, safe and customizable therapy
Product category: Laser therapy equipment
LUMIX C.P.S. The portable laser Continuous, Pulsed and Superpulsed
LUMIX® C.P.S.® is an innovative high power multidiode laser with C.P.S.® (Continuous, Pulsed and Superpulsed) emission that performs effective photobiostimulation in Physiotherapy, Rehabilitative Medicine, Sports Medicine and Orthopedic fields.
Specifications
The multi wavelength of the LUMIX® C.P.S.®, the high peak power (300W) and the high average power that reaches 31W allow for a large volumetric treatmets with high amount of energy deep into tissues.
Wavelength and peak power are among the essential factors for deep tissue penetration. It is important that the laser have a wavelengths that fall within the so-called “THERAPEUTIC WINDOW”: LUMIX® C.P.S.® emits a wavelengths from 650 nm to 1064 nm with a peak power of 300W.
The exclusive C.P.S.® system created by Fisioline® mixes the emissions of different types of laser sources to integrate special characteristics such as high peak power of superpulsed sources and the high average power of the continuous sources. The integration is done with the available continuous sources making LUMIX® C.P.S.® a powerful and extremely high performance laser.
The real superpulsation
The use of high pulsation frequencies (over 30 KHz: Superpulsation) exploits a new physical phenomenon: the photomechanical effect, that is the transformation, at a molecular level, of the luminous EM energy into mechanical energy. This can accentuate, at the same wavelength and power, the effects both on the conduction structures, that is on the muscle tissue (decontraction) and nervous (antalgia), and on the fibrose tissue (increase elasticity).
The wide frequency adjustment range (from 1Hz to 100,000Hz) makes LUMIX® C.P.S.® a unique laser of its kind. The superpulsation (from 30.000Hz to 100.000Hz) is the main feature in laser photobiostimulation to induce bone and cartilage growth, as attested by scientific publications carried out with Fisioline® lasers.
The pluses of C.P.S.® system
Multi wavelength.
Wavelengths selected to ensure the uniformity of energy distribution from the surface layers to the deeper layers.
Combination and synchronisation. The synchronisation and combination of different types of continuous, pulsed and superpulsed sources allows for direct intervention both on symptomatology and on the cause of diseases.
Overlapping: single spot. Optically overlapping diodes mixed with optical fibers to implement homogeneous irradiation on one point.
Reduced times
The high energy density, the different biostimulation of the different wavelengths and the thermal effect obtained with LUMIX® C.P.S.® allow the user to work with extremely fast treatments, reducing the number of applications.
Specifications
- The highest peak power in a portable laser: 300W
- Average power: from 5W to 31W
- Up to 5 available wavelengths
- The real superpulsation: up to 100.000Hz
- Nanotechnology: Nanoimpulses of 70ns
The multi wavelength of the LUMIX® C.P.S.®, the high peak power (300W) and the high average power that reaches 31W allow for a large volumetric treatmets with high amount of energy deep into tissues.
Wavelength and peak power are among the essential factors for deep tissue penetration. It is important that the laser have a wavelengths that fall within the so-called “THERAPEUTIC WINDOW”: LUMIX® C.P.S.® emits a wavelengths from 650 nm to 1064 nm with a peak power of 300W.
The exclusive C.P.S.® system created by Fisioline® mixes the emissions of different types of laser sources to integrate special characteristics such as high peak power of superpulsed sources and the high average power of the continuous sources. The integration is done with the available continuous sources making LUMIX® C.P.S.® a powerful and extremely high performance laser.
The real superpulsation
The use of high pulsation frequencies (over 30 KHz: Superpulsation) exploits a new physical phenomenon: the photomechanical effect, that is the transformation, at a molecular level, of the luminous EM energy into mechanical energy. This can accentuate, at the same wavelength and power, the effects both on the conduction structures, that is on the muscle tissue (decontraction) and nervous (antalgia), and on the fibrose tissue (increase elasticity).
The wide frequency adjustment range (from 1Hz to 100,000Hz) makes LUMIX® C.P.S.® a unique laser of its kind. The superpulsation (from 30.000Hz to 100.000Hz) is the main feature in laser photobiostimulation to induce bone and cartilage growth, as attested by scientific publications carried out with Fisioline® lasers.
The pluses of C.P.S.® system
Multi wavelength.
Wavelengths selected to ensure the uniformity of energy distribution from the surface layers to the deeper layers.
Combination and synchronisation. The synchronisation and combination of different types of continuous, pulsed and superpulsed sources allows for direct intervention both on symptomatology and on the cause of diseases.
Overlapping: single spot. Optically overlapping diodes mixed with optical fibers to implement homogeneous irradiation on one point.
Reduced times
The high energy density, the different biostimulation of the different wavelengths and the thermal effect obtained with LUMIX® C.P.S.® allow the user to work with extremely fast treatments, reducing the number of applications.
Product category: Laser therapy equipment
LUMIX® 2. HIGH FREQUENCY POWER LASER.
LUMIX® 2 is a new double wavelengths, portable laser therapy equipment, that can be used in outpatient clinics, at physicians’ offices and physiotherapy clinics.
LUMIX® 2 uses laser energy transmission through optical fibers to transfer the laser light from the source to the treatment area. Together with the realization of an extremely versatile laser piloting device, this technique allows the LUMIX® 2 to mix two types of laser light on a single spot: RED (650nm) and INFRARED (910nm).
LUMIX® 2 is effective because BIDIODIC: high power laser diode in the wavelength of the PULSED-SUPERPULSED INFRARED and CONTINUOUS laser diode in the wavelength of the RED, that allow to transmit energy to the tissue at the different subcutaneous levels. The high performances, the different biostimulation of the two wavelengths and the resulting thermal effect, allow the operator to work with rapid treatments.
The possibility to interact on the emission mode, through the power regulation and the INFRARED diode frequency, makes LUMIX® 2 extremely versatile for all the laser therapy uses in medical and physiotherapeutic field.
Tissue penetration
Among the factors allowing a laser light to penetrate the human tissues, wavelength and peak power are essential. It is important for the laser beam to have a wavelength falling within the so called “THERAPEUTIC WINDOW” i.e. 600 to 1400 nanometers. LUMIX® 2 laser produces beams in the wavelengths of 650nm (red diode) and 910 nanometers (infrared diode).
At the same wavelength the peak power is indispensable to reach deeply in the tissue. Using a laser with high peak powers is therefore absolutely necessary to reach the deep layers: the peak power of LUMIX® 2 is 100W.
Touch screen version
The interface of LUMIX® 2 in touch-screen version displays the parameters on a large color display that allows to remotely read and gives to the operator the possibility to select, modify and keep always under control the functions and the working parameters.
A unique feature of LUMIX® 2 touch-screen version is the Wizard, a step-by-step digital guide to use the device. Thanks to an intuitive software, the Wizard leads the operator in selecting the therapeutic preset protocols focused on severe and chronic pathologies.
PRESET PROTOCOLS RAPID RESEARCH WITH THE INNER FINDER
for pathology, n. of program, body area
FREE PROTOCOL SELECTION
frequency, separate setting of the sources, duty-cycle, duration
CREATION OF PERSONALIZED PROGRAMS
saving data sets, 100 free storage locations, multiphase programs up to 4 phases
UPGRADABLE VIA USB PORT
Version with graphic display
LUMIX® 2 is easy to use, equipped with a large backlit graphic display allowing the operator to keep all the functions under control. An attractive design, a user interface equipped with keyboard and display give a decidedly modern and professional look.
LUMIX® 2 is a compact and light device, offering high performances that can satisfy every treatment need, including those of operators who, working on different locations, need a cutting-edge and easily portable instrument.
PRESET PROTOCOLS
for the main pathologies both severe and chronic
FREE PROTOCOL SELECTION
frequency, duty-cycle, duration
CREATION OF PERSONALIZED PROGRAMS
saving data sets, 100 free storage locations, multiphase programs
LUMIX® 2 uses laser energy transmission through optical fibers to transfer the laser light from the source to the treatment area. Together with the realization of an extremely versatile laser piloting device, this technique allows the LUMIX® 2 to mix two types of laser light on a single spot: RED (650nm) and INFRARED (910nm).
LUMIX® 2 is effective because BIDIODIC: high power laser diode in the wavelength of the PULSED-SUPERPULSED INFRARED and CONTINUOUS laser diode in the wavelength of the RED, that allow to transmit energy to the tissue at the different subcutaneous levels. The high performances, the different biostimulation of the two wavelengths and the resulting thermal effect, allow the operator to work with rapid treatments.
The possibility to interact on the emission mode, through the power regulation and the INFRARED diode frequency, makes LUMIX® 2 extremely versatile for all the laser therapy uses in medical and physiotherapeutic field.
Tissue penetration
Among the factors allowing a laser light to penetrate the human tissues, wavelength and peak power are essential. It is important for the laser beam to have a wavelength falling within the so called “THERAPEUTIC WINDOW” i.e. 600 to 1400 nanometers. LUMIX® 2 laser produces beams in the wavelengths of 650nm (red diode) and 910 nanometers (infrared diode).
At the same wavelength the peak power is indispensable to reach deeply in the tissue. Using a laser with high peak powers is therefore absolutely necessary to reach the deep layers: the peak power of LUMIX® 2 is 100W.
Touch screen version
The interface of LUMIX® 2 in touch-screen version displays the parameters on a large color display that allows to remotely read and gives to the operator the possibility to select, modify and keep always under control the functions and the working parameters.
A unique feature of LUMIX® 2 touch-screen version is the Wizard, a step-by-step digital guide to use the device. Thanks to an intuitive software, the Wizard leads the operator in selecting the therapeutic preset protocols focused on severe and chronic pathologies.
PRESET PROTOCOLS RAPID RESEARCH WITH THE INNER FINDER
for pathology, n. of program, body area
FREE PROTOCOL SELECTION
frequency, separate setting of the sources, duty-cycle, duration
CREATION OF PERSONALIZED PROGRAMS
saving data sets, 100 free storage locations, multiphase programs up to 4 phases
UPGRADABLE VIA USB PORT
Version with graphic display
LUMIX® 2 is easy to use, equipped with a large backlit graphic display allowing the operator to keep all the functions under control. An attractive design, a user interface equipped with keyboard and display give a decidedly modern and professional look.
LUMIX® 2 is a compact and light device, offering high performances that can satisfy every treatment need, including those of operators who, working on different locations, need a cutting-edge and easily portable instrument.
PRESET PROTOCOLS
for the main pathologies both severe and chronic
FREE PROTOCOL SELECTION
frequency, duty-cycle, duration
CREATION OF PERSONALIZED PROGRAMS
saving data sets, 100 free storage locations, multiphase programs
Product category: Laser therapy equipment
LUMIX® CW CONTINUOUS AND FREQUENCED LASER
LUMIX® CW is a new double wavelengths, portable laser therapy equipment, that can be used in outpatient clinics, at physicians’ offices and physiotherapy clinics.
LUMIX® CW uses laser energy transmission through optical fibers to transfer the laser light from the source to the treatment area.
Together with the realization of an extremely versatile laser piloting device, this technique allows the LUMIX® CW to mix two types of laser light on a single spot: RED (650nm) and INFRARED (810nm or 1064 nm).
LUMIX® CW è is effective because BIDIODIC: high power laser diode in the wavelength of the CONTINUOUS-FREQUENCED and CONTINUOUS laser diode in the wavelength of the RED, that allow to transmit energy to the tissue at the different subcutaneous levels. The high performances, the different biostimulation of the two wavelengths and the resulting thermal effect, allow the operator to work with rapid treatments.
The possibility to interact on the emission mode, through the power regulation and the INFRARED diode frequency, makes LUMIX® CW extremely versatile for all the laser therapy uses in medical and physiotherapeutic field.
Tissue penetration
LUMIX® CW (Continuous Wave) uses a CONTINUOUS laser diode (2W) in the infrared wavelength with CONTINUOUS and FREQUENCED emission and a diode in the red wavelength with CONTINUOUS emission.
Adopting this type of diode allows LUMIX® CW laser to transmit the tissue a high average output power because this value is considerably close to that of its highest emission power.
It is important for the laser beam to have a wavelength falling within the so called “THERAPEUTIC WINDOW” i.e. 600 to 1400 nanometers. LUMIX®CW laser produces beams in the wavelengths of 650nm (red diode), 810nm or 1064 nm (infrared diode).
Cascade activation system
By means of the cascade activation system the high average power makes the treatments with the laser LUMIX® CW particularly effectives. The effect on the interested area is obtained starting from the skin receiver, by means of chemical-electric messengers transmitted between adjacent cells. The whole process is amplifyed by the particular divergence of the laser beam (about 15 degrees) that helps the subcutaneous scattering.
Touch screen version
The interface of LUMIX® CW in touch-screen version displays the parameters on a large color display that allows to remotely read and gives to the operator the possibility to select, modify and keep always under control the functions and the working parameters.
A unique feature of LUMIX® CW touch-screen version is the Wizard, a step-by-step digital guide to use the device. Thanks to an intuitive software, the Wizard leads the operator in selecting the therapeutic preset protocols focused on severe and chronic pathologies.
PRESET PROTOCOLS RAPID RESEARCH WITH THE INNER FINDER
for pathology, n. of program, body area
FREE PROTOCOL SELECTION
frequency, separate setting of the sources, duty-cycle, duration
CREATION OF PERSONALIZED PROGRAMS
saving data sets, 100 free storage locations, multiphase progra ms up to 4 phases
UPGRADABLE VIA USB PORT
Version with graphic display
LUMIX® CW is easy to use, equipped with a large backlit graphic display allowing the operator to keep all the functions under control. An attractive design, a user interface equipped with keyboard and display give a decidedly modern and professional look.
LUMIX® CW is a compact and light device, offering high performances that can satisfy every treatment need, including those of operators who, working on different locations, need a cutting-edge and easily portable instrument.
PRESET PROTOCOLS
for the main pathologies both severe and chronic
FREE PROTOCOL SELECTION
frequency, duty-cycle, duration
CREATION OF PERSONALIZED PROGRAMS
saving data sets, 100 free storage locations, multiphase progra ms
LUMIX® CW uses laser energy transmission through optical fibers to transfer the laser light from the source to the treatment area.
Together with the realization of an extremely versatile laser piloting device, this technique allows the LUMIX® CW to mix two types of laser light on a single spot: RED (650nm) and INFRARED (810nm or 1064 nm).
LUMIX® CW è is effective because BIDIODIC: high power laser diode in the wavelength of the CONTINUOUS-FREQUENCED and CONTINUOUS laser diode in the wavelength of the RED, that allow to transmit energy to the tissue at the different subcutaneous levels. The high performances, the different biostimulation of the two wavelengths and the resulting thermal effect, allow the operator to work with rapid treatments.
The possibility to interact on the emission mode, through the power regulation and the INFRARED diode frequency, makes LUMIX® CW extremely versatile for all the laser therapy uses in medical and physiotherapeutic field.
Tissue penetration
LUMIX® CW (Continuous Wave) uses a CONTINUOUS laser diode (2W) in the infrared wavelength with CONTINUOUS and FREQUENCED emission and a diode in the red wavelength with CONTINUOUS emission.
Adopting this type of diode allows LUMIX® CW laser to transmit the tissue a high average output power because this value is considerably close to that of its highest emission power.
It is important for the laser beam to have a wavelength falling within the so called “THERAPEUTIC WINDOW” i.e. 600 to 1400 nanometers. LUMIX®CW laser produces beams in the wavelengths of 650nm (red diode), 810nm or 1064 nm (infrared diode).
Cascade activation system
By means of the cascade activation system the high average power makes the treatments with the laser LUMIX® CW particularly effectives. The effect on the interested area is obtained starting from the skin receiver, by means of chemical-electric messengers transmitted between adjacent cells. The whole process is amplifyed by the particular divergence of the laser beam (about 15 degrees) that helps the subcutaneous scattering.
Touch screen version
The interface of LUMIX® CW in touch-screen version displays the parameters on a large color display that allows to remotely read and gives to the operator the possibility to select, modify and keep always under control the functions and the working parameters.
A unique feature of LUMIX® CW touch-screen version is the Wizard, a step-by-step digital guide to use the device. Thanks to an intuitive software, the Wizard leads the operator in selecting the therapeutic preset protocols focused on severe and chronic pathologies.
PRESET PROTOCOLS RAPID RESEARCH WITH THE INNER FINDER
for pathology, n. of program, body area
FREE PROTOCOL SELECTION
frequency, separate setting of the sources, duty-cycle, duration
CREATION OF PERSONALIZED PROGRAMS
saving data sets, 100 free storage locations, multiphase progra ms up to 4 phases
UPGRADABLE VIA USB PORT
Version with graphic display
LUMIX® CW is easy to use, equipped with a large backlit graphic display allowing the operator to keep all the functions under control. An attractive design, a user interface equipped with keyboard and display give a decidedly modern and professional look.
LUMIX® CW is a compact and light device, offering high performances that can satisfy every treatment need, including those of operators who, working on different locations, need a cutting-edge and easily portable instrument.
PRESET PROTOCOLS
for the main pathologies both severe and chronic
FREE PROTOCOL SELECTION
frequency, duty-cycle, duration
CREATION OF PERSONALIZED PROGRAMS
saving data sets, 100 free storage locations, multiphase progra ms
Product category: Laser therapy equipment
LUMIX® C.P.S.® Podiatry. LASER FOR PODIATRIC APPLICATIONS Innovative high power multi-diode laser for podiatry with C.P.S.® emission (Continua, Pulsata e Superpulsata) properly designed and realized to satisfy the Podiatrist’s needs.
LUMIX® C.P.S.® Podiatry is an innovative high power multidiodic Laser with C.P.S.® emission (Continuous, Pulsed and Superpulsed) that performs effective photobiostimulation in the podiatry field.
Specifications
Peak power: 100W
Average power: from 9W to 31W
Up to 5 wavelengths available
Superpulsation: up to 100,000Hz
The C.P.S.® multi wavelength system
The multi wavelength of the LUMIX® C.P.S.® Podiatry, the high peak power (100W) and the high average power reaching 31W allow a wide volumetric involvement of the treated area with the administration of a high amount of energy in depth, ensuring especially deep tissue penetration.
Wavelength and peak power are among the essential factors that allow the penetration of a laser light in human tissues. It is important that the laser has a wavelength that falls within the so-called “THERAPEUTIC WINDOW”: LUMIX® C.P.S.® Podiatry emits a wavelength from 650nm to 1064nm and the peak power of the LUMIX® C.P.S.® Podiatry laser is 100W.
The highly technological C.P.S.® system by Fisioline® permits the mixing of emissions of different types of laser sources, allowing for the overlapping of special characteristics such as high peak power of superpulsated sources and the high average power of the continuous sources at various available wavelengths. The exclusive C.P.S.® system makes LUMIX® C.P.S.® Podiatry a powerful and extremely performing laser.
The pluses of the C.P.S.® system
Multi wavelength. 5 Wavelengths selected to ensure the uniformity of energy distribution from the surface layers to the deeper layers.
Combination and synchronisation. The synchronisation and combination of different types of continuous, pulsed and superpulsed sources allows for direct intervention both on symptomatology and on the cause of diseases.
Overlapping: single spot. Optically overlapping diodes mixed with optical fibers to implement homogeneous irradiation on one point.
The possibility of interacting on the emission mode by adjusting the power and the frequency make the LUMIX® C.P.S.® Podiatry laser extremely versatile for all podiatry field laser therapy applications.
Reduced times
The high energy density, the different biostimulation of the different wavelengths and the thermal effect obtained as a consequence thereof, allow the user to work with extremely fast treatments.
THERAPEUTIC indications
BIOSTIMULATION Ulcers (vascular ulcers of the malleolus, diabetic ulcers, etc.), sores, lesions, perilesional points, edema, post-distorting edema, bruising, chondropathies, bone regeneration, tissue regeneration.
ONYCHOMYCOSIS
ANALGESIC Plantar fasciitis, hallux valgus, bursitis, heel spurs, calcaneal spurs, tarsal tunnel syndrome, talalgia, metatarsalgia, arthritis-arthrosis, interdigital neuritis, Achilles tendonitis, Morton’s neuroma, diabetic neuropathy, tibiotarsal sprain
WARTS
ANTI-BACTERIAL
POST-TRAUMATIC
ANTI-INFLAMMATORY Inflammatory, joint-tendon-muscle nerve degeneration conditions. Local muscular pain, myofascial syndrome, myospasm, myalgia or fibromyalgia
REHABILITATION THERAPY Motor joint rehabilitation after removal of plaster casts or orthopedic surgery.
Specifications
Peak power: 100W
Average power: from 9W to 31W
Up to 5 wavelengths available
Superpulsation: up to 100,000Hz
The C.P.S.® multi wavelength system
The multi wavelength of the LUMIX® C.P.S.® Podiatry, the high peak power (100W) and the high average power reaching 31W allow a wide volumetric involvement of the treated area with the administration of a high amount of energy in depth, ensuring especially deep tissue penetration.
Wavelength and peak power are among the essential factors that allow the penetration of a laser light in human tissues. It is important that the laser has a wavelength that falls within the so-called “THERAPEUTIC WINDOW”: LUMIX® C.P.S.® Podiatry emits a wavelength from 650nm to 1064nm and the peak power of the LUMIX® C.P.S.® Podiatry laser is 100W.
The highly technological C.P.S.® system by Fisioline® permits the mixing of emissions of different types of laser sources, allowing for the overlapping of special characteristics such as high peak power of superpulsated sources and the high average power of the continuous sources at various available wavelengths. The exclusive C.P.S.® system makes LUMIX® C.P.S.® Podiatry a powerful and extremely performing laser.
The pluses of the C.P.S.® system
Multi wavelength. 5 Wavelengths selected to ensure the uniformity of energy distribution from the surface layers to the deeper layers.
Combination and synchronisation. The synchronisation and combination of different types of continuous, pulsed and superpulsed sources allows for direct intervention both on symptomatology and on the cause of diseases.
Overlapping: single spot. Optically overlapping diodes mixed with optical fibers to implement homogeneous irradiation on one point.
The possibility of interacting on the emission mode by adjusting the power and the frequency make the LUMIX® C.P.S.® Podiatry laser extremely versatile for all podiatry field laser therapy applications.
Reduced times
The high energy density, the different biostimulation of the different wavelengths and the thermal effect obtained as a consequence thereof, allow the user to work with extremely fast treatments.
THERAPEUTIC indications
BIOSTIMULATION Ulcers (vascular ulcers of the malleolus, diabetic ulcers, etc.), sores, lesions, perilesional points, edema, post-distorting edema, bruising, chondropathies, bone regeneration, tissue regeneration.
ONYCHOMYCOSIS
ANALGESIC Plantar fasciitis, hallux valgus, bursitis, heel spurs, calcaneal spurs, tarsal tunnel syndrome, talalgia, metatarsalgia, arthritis-arthrosis, interdigital neuritis, Achilles tendonitis, Morton’s neuroma, diabetic neuropathy, tibiotarsal sprain
WARTS
ANTI-BACTERIAL
POST-TRAUMATIC
ANTI-INFLAMMATORY Inflammatory, joint-tendon-muscle nerve degeneration conditions. Local muscular pain, myofascial syndrome, myospasm, myalgia or fibromyalgia
REHABILITATION THERAPY Motor joint rehabilitation after removal of plaster casts or orthopedic surgery.
Product category: Laser surgery equipment
LUMIX® SURGERY DUAL Dental, the dental laser with dual modality use for Surgery and Therapy
LUMIX® SURGERY DUAL Dental the dental laser with dual modality use for Surgery and Therapy
LUMIX® SURGERY DUAL Dental is the first complete system with laser sources dedicated to both Surgery and Therapy in dental field.
LUMIX® SURGERY DUAL Dental allows you to work with 2 operating modes:
Surgical: continuous, burst mode with adjustable action time
Therapeutic: continuous, pulsed, superpulsed, C.P.S.®
Specifications
Peak power: 100W
Average power: from 9W up to 31W
Up to 5 available wavelenghts
Superpulsation: up to 100.000Hz
Therapy
LUMIX® SURGERY DUAL Dental is an innovative high power multidiode laser with C.P.S.® (Continuous, Pulsed and Superpulsed) emission that performs effective photobiostimulation in the Dental field.
The multiwavelength of LUMIX® SURGERY DUAL Dental, the high peak power (100W) and the high average powers that reache 31W allow for a large volumetric treatments with high amount of energy deep into tissues. This guarantees a particularly high tissue penetration and a fast therapy with exceptional results.
The pluses of the therapeutic mode:
Wavelengths to reach the deepest tissue layers.
The synchronisation and integration of different sources for direct intervention on symptomatology and etiology of diseases.
Optically collimated diodes for a homogeneous irradiation on one treatment spot.
Surgery
LUMIX® SURGERY DUAL Dental is the surgical laser that allows 2 actions in a single device: cut and coagulation.
Using the contact mode fiber, LUMIX®SURGERY DUAL Dental is the evolution of the common blade, with unique particulars like biostimulation and analgesia.
Main advantages compared to traditional surgical methods:
Extremely tolerable treatment
Reduced healing times
Minimum or no bleeding at all
Reduced or no post-surgery infections at all
Maximum precision in cutting soft tissues
Essential for microsurgery: avoids the need of stitches
Coagulation ability
Less impact on treated and surroundings tissues
Less post-surgery pain
Less post-surgery edema
No traction of the tissues in the healing phase
Better tissues aesthetics in the post-surgery phase
Better healing
Less use of post-surgery pharmacological treatments
Information for soft tissue Surgery and Microsurgery
SURGERY
GINGIVECTOMY
GINGIVOPLASTY
FRENECTOMY
OPERCULECTOMY
INCISION
ELONGATION OF THE CLINICAL CROWN
HEMOSTASIS
SURGICAL OPERATIONS FOR THE REMOVAL OF NEOFORMATIONS
CORRECTION OF GINGIVAL MORPHOLOGY
ENDODONTICS
PERIODONTOLOGY
IMPLANTOLOGY
Effective, safe and customizable therapy
POST ORAL SURGERY
PERIODONTOLOGY
ENDODONTICS
ORAL PATHOLOGY
TMJ DISEASE
DENTINE DESENSITIZATION
THERAPY
AESTHETIC MEDICINE
LUMIX® SURGERY DUAL Dental is the first complete system with laser sources dedicated to both Surgery and Therapy in dental field.
LUMIX® SURGERY DUAL Dental allows you to work with 2 operating modes:
Surgical: continuous, burst mode with adjustable action time
Therapeutic: continuous, pulsed, superpulsed, C.P.S.®
Specifications
Peak power: 100W
Average power: from 9W up to 31W
Up to 5 available wavelenghts
Superpulsation: up to 100.000Hz
Therapy
LUMIX® SURGERY DUAL Dental is an innovative high power multidiode laser with C.P.S.® (Continuous, Pulsed and Superpulsed) emission that performs effective photobiostimulation in the Dental field.
The multiwavelength of LUMIX® SURGERY DUAL Dental, the high peak power (100W) and the high average powers that reache 31W allow for a large volumetric treatments with high amount of energy deep into tissues. This guarantees a particularly high tissue penetration and a fast therapy with exceptional results.
The pluses of the therapeutic mode:
Wavelengths to reach the deepest tissue layers.
The synchronisation and integration of different sources for direct intervention on symptomatology and etiology of diseases.
Optically collimated diodes for a homogeneous irradiation on one treatment spot.
Surgery
LUMIX® SURGERY DUAL Dental is the surgical laser that allows 2 actions in a single device: cut and coagulation.
Using the contact mode fiber, LUMIX®SURGERY DUAL Dental is the evolution of the common blade, with unique particulars like biostimulation and analgesia.
Main advantages compared to traditional surgical methods:
Extremely tolerable treatment
Reduced healing times
Minimum or no bleeding at all
Reduced or no post-surgery infections at all
Maximum precision in cutting soft tissues
Essential for microsurgery: avoids the need of stitches
Coagulation ability
Less impact on treated and surroundings tissues
Less post-surgery pain
Less post-surgery edema
No traction of the tissues in the healing phase
Better tissues aesthetics in the post-surgery phase
Better healing
Less use of post-surgery pharmacological treatments
Information for soft tissue Surgery and Microsurgery
SURGERY
GINGIVECTOMY
GINGIVOPLASTY
FRENECTOMY
OPERCULECTOMY
INCISION
ELONGATION OF THE CLINICAL CROWN
HEMOSTASIS
SURGICAL OPERATIONS FOR THE REMOVAL OF NEOFORMATIONS
CORRECTION OF GINGIVAL MORPHOLOGY
ENDODONTICS
PERIODONTOLOGY
IMPLANTOLOGY
Effective, safe and customizable therapy
POST ORAL SURGERY
PERIODONTOLOGY
ENDODONTICS
ORAL PATHOLOGY
TMJ DISEASE
DENTINE DESENSITIZATION
THERAPY
AESTHETIC MEDICINE
Product category: Physiotherapy equipment
Fisioline RADIANT® Monopolar – Bipolar – Tripolar systems for T.E.C.A.R. Therapy
Fisioline RADIANT® is a radiofrequency generator which administers energy via the passing of an electrical current with monopolar, bipolar and tripolar, capacitive or resistive effects. The basic principle of radiofrequency is heat induction by means of the administration of electromagnetic waves to stimulate natural rehabilitation and anti-inflammatory processes within biological structures.
4 models of T.e.c.a.r Therapy suitable to meet the needings of each operator.
Available versions:
Fisioline RADIANT® 200: 200W – 350VA of power
Fisioline RADIANT® 300: 300W – 400VA of power
Fisioline RADIANT® 400: 400W – 450VA of power
Fisioline RADIANT® Mobile: portable version with 200W – 350VA of power and a practical carrying case.
Resistive bipolar and tripolar handpieces
An exceptional feature of Fisioline RADIANT® are the circular and sphere resistive bipolar handpieces and the tripolar handpieces. Fisioline RADIANT® has been one of the first devices for T.e.c.a.r Therapy to opt for resistive bipolar handpieces.
This application technique, which does not require the reference electrode, allows to define the treated area with resistive method. Pathologies such as Achille’s tendonitis, patellar tendonitis, temporomandibular dysfunction can be treated by concentrating the energy exclusively on the affected area.
In the same way, with this method, it is possible to treat areas of the body such as the head and the neck which are untreatable with the monopolar method. Fisioline RADIANT® allows to opt for tripolar resistive handpieces as an alternative to resistive bipolar handpieces that, in particular applications, allow to optimize the distribution of the energy.
Continued and pulsed emission
Fisioline RADIANT® combines the continued and pulsed emission keeping under control the hyperthermia effects. Necessary in the treatment of musculoskeletal pathologies in the acute phase or in those treatments that have to be mainly athermic such as recent traumatic injuries.
The pulsed mode allows the operator to set the DUTY-CYCLE (adjustable from 10% up to 90%) and therefore erogation and pause times, customizing the therapy to the needs of each patient.
Automatic mode
Beside the traditional manual therapy, Fisioline RADIANT® is provided with the automatic mode, both capacitive and resistive, allowing the automatic application of the radiofrequency without the continuous intervention of the operator.
Electronic meter, energy power bar and right contact
Fisioline RADIANT® devices are equipped with an electronic meter to measure the patient’s tissue impedance and, together with the Energy Power Bar, to keep under constant control the energy absorbed by tissues. For a safety and proper use, the device is equipped also with a protection device which detects the contact of the reference electrode through audio-visual check.
Crash course of T.e.c.a.r. Therapy available in your technology
Multimedia videos associated to treatments.
Fisioline RADIANT® presents an important innovation: the matching of preset therapeutic protocols to illustrating video tutorials, always available, updatable and usable directly from the device console, showing details the steps to be followed by operator and patient during the therapy. These training materials allow for a rapid use even for operators with no particular experience in the use of T.e.c.a.r. Therapy.
4 models of T.e.c.a.r Therapy suitable to meet the needings of each operator.
Available versions:
Fisioline RADIANT® 200: 200W – 350VA of power
Fisioline RADIANT® 300: 300W – 400VA of power
Fisioline RADIANT® 400: 400W – 450VA of power
Fisioline RADIANT® Mobile: portable version with 200W – 350VA of power and a practical carrying case.
Resistive bipolar and tripolar handpieces
An exceptional feature of Fisioline RADIANT® are the circular and sphere resistive bipolar handpieces and the tripolar handpieces. Fisioline RADIANT® has been one of the first devices for T.e.c.a.r Therapy to opt for resistive bipolar handpieces.
This application technique, which does not require the reference electrode, allows to define the treated area with resistive method. Pathologies such as Achille’s tendonitis, patellar tendonitis, temporomandibular dysfunction can be treated by concentrating the energy exclusively on the affected area.
In the same way, with this method, it is possible to treat areas of the body such as the head and the neck which are untreatable with the monopolar method. Fisioline RADIANT® allows to opt for tripolar resistive handpieces as an alternative to resistive bipolar handpieces that, in particular applications, allow to optimize the distribution of the energy.
Continued and pulsed emission
Fisioline RADIANT® combines the continued and pulsed emission keeping under control the hyperthermia effects. Necessary in the treatment of musculoskeletal pathologies in the acute phase or in those treatments that have to be mainly athermic such as recent traumatic injuries.
The pulsed mode allows the operator to set the DUTY-CYCLE (adjustable from 10% up to 90%) and therefore erogation and pause times, customizing the therapy to the needs of each patient.
Automatic mode
Beside the traditional manual therapy, Fisioline RADIANT® is provided with the automatic mode, both capacitive and resistive, allowing the automatic application of the radiofrequency without the continuous intervention of the operator.
Electronic meter, energy power bar and right contact
Fisioline RADIANT® devices are equipped with an electronic meter to measure the patient’s tissue impedance and, together with the Energy Power Bar, to keep under constant control the energy absorbed by tissues. For a safety and proper use, the device is equipped also with a protection device which detects the contact of the reference electrode through audio-visual check.
Crash course of T.e.c.a.r. Therapy available in your technology
Multimedia videos associated to treatments.
Fisioline RADIANT® presents an important innovation: the matching of preset therapeutic protocols to illustrating video tutorials, always available, updatable and usable directly from the device console, showing details the steps to be followed by operator and patient during the therapy. These training materials allow for a rapid use even for operators with no particular experience in the use of T.e.c.a.r. Therapy.
Product category: Physiotherapy equipment
FISIOSONIC® the multifrequency ultrasound in class E
FISIOSONIC® is a new device for ultrasound therapy, using an innovative output stage called class E. The mechanical efficiency obtained through the output stage in class E is decidedly higher than the one that can be obtained by means of traditional output stages and allows the operator to issue high powers on the patient in a constant and controlled way in relation to impedance of the tissues and with a limited thermal effect.
FISIOSONIC® is a last generation ultrasound device that uses 1-3MHz multifrequency applicators. These frequencies can be used separately or in joint mode during the treatment. Besides traditional methods, FISIOSONIC® has introduced two innovative functions: sequential treatment and automatic frequency switching.
The sequential treatment offers the operator the opportunity of using multidisc scanning applicators with a wide contact surface to be applied by common elastic straps. The ultrasound emission is sequential and allows the operator to carry out an automatic treatment on a wide surface with no need for a manual dedicated intervention.
The automatic frequency switching is obtained by the exclusive A.F.S. (AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible to exploit the various focalizations of 1 and 3 MHz frequencies at the same time, allowing to set different supplying times for each frequency. This feature allows the operator to obtain a focalized action. The applicators are waterproof for underwater treatments.
The instrument can be operated in two modes: continuous and pulsed. The pulsed operating mode permits to modulate the energy (duty-cycle from 10% to 90%) in order to reduce the thermal effect and keep the peak pressure applied by the acoustic wave on the tissues steady. The output power density can be adjusted from 0 W/cm2 a 3 W/cm2.
FISIOSONIC® is equipped with self-calibration system and visual and sound contact control system. The appliance is equipped with an inlet for electrotherapy appliance connection (Modulo series); the operator can then carry out a combined therapy with any applicator.
FISIOSONIC® is equipped with a library of preset therapeutic protocols focused on severe and chronic pathologies. It provides the operator the option to create customized programs for a patient and indicated for specific pathologies or areas to be treated, for rapid and efficient therapies. The user interface, equipped with keyboard and graphic display, has a decidedly modern and professional look.
Available also in touch screen version!!
FISIOSONIC® is a last generation ultrasound device that uses 1-3MHz multifrequency applicators. These frequencies can be used separately or in joint mode during the treatment. Besides traditional methods, FISIOSONIC® has introduced two innovative functions: sequential treatment and automatic frequency switching.
The sequential treatment offers the operator the opportunity of using multidisc scanning applicators with a wide contact surface to be applied by common elastic straps. The ultrasound emission is sequential and allows the operator to carry out an automatic treatment on a wide surface with no need for a manual dedicated intervention.
The automatic frequency switching is obtained by the exclusive A.F.S. (AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible to exploit the various focalizations of 1 and 3 MHz frequencies at the same time, allowing to set different supplying times for each frequency. This feature allows the operator to obtain a focalized action. The applicators are waterproof for underwater treatments.
The instrument can be operated in two modes: continuous and pulsed. The pulsed operating mode permits to modulate the energy (duty-cycle from 10% to 90%) in order to reduce the thermal effect and keep the peak pressure applied by the acoustic wave on the tissues steady. The output power density can be adjusted from 0 W/cm2 a 3 W/cm2.
FISIOSONIC® is equipped with self-calibration system and visual and sound contact control system. The appliance is equipped with an inlet for electrotherapy appliance connection (Modulo series); the operator can then carry out a combined therapy with any applicator.
FISIOSONIC® is equipped with a library of preset therapeutic protocols focused on severe and chronic pathologies. It provides the operator the option to create customized programs for a patient and indicated for specific pathologies or areas to be treated, for rapid and efficient therapies. The user interface, equipped with keyboard and graphic display, has a decidedly modern and professional look.
Available also in touch screen version!!
Product category: Physiotherapy equipment
FISIOSONIC® PLUS the multifrequency ultrasound in class E
FISIOSONIC® PLUS is a new device for ultrasound therapy, using an innovative output stage called class E. The mechanical efficiency obtained through the output stage in class E is decidedly higher than the one that can be obtained by means of traditional output stages and allows the operator to issue high powers on the patient in a constant and controlled way in relation to impedance of the tissues and with a limited thermal effect.
FISIOSONIC® PLUS is a last generation ultrasound device that uses 1-3MHz multifrequency applicators. These frequencies can be used separately or in joint mode during the treatment. Besides traditional methods, FISIOSONIC® PLUS has introduced two innovative functions: sequential treatment and automatic frequency switching.
The sequential treatment offers the operator the opportunity of using multidisc scanning applicators with a wide contact surface to be applied by common elastic straps. The ultrasound emission is sequential and allows the operator to carry out an automatic treatment on a wide surface with no need for a manual dedicated intervention.
The automatic frequency switching is obtained by the exclusive A.F.S. (AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible to exploit the various focalizations of 1 and 3 MHz frequencies at the same time, allowing to set different supplying times for each frequency. This feature allows the operator to obtain a focalized action. The applicators are waterproof for underwater treatments.
The instrument can be operated in two modes: continuous and pulsed. The pulsed operating mode permits to modulate the energy (duty-cycle from 10% to 90%) in order to reduce the thermal effect and keep the peak pressure applied by the acoustic wave on the tissues steady. The output power density can be adjusted from 0 W/cm2 a 3 W/cm2.
FISIOSONIC® PLUS is equipped with self-calibration system and visual and sound contact control system. The appliance is equipped with an inlet for electrotherapy appliance connection (Modulo series); the operator can then carry out a combined therapy with any applicator.
FISIOSONIC® PLUS is equipped with a library of preset therapeutic protocols focused on severe and chronic pathologies. It provides the operator the option to create customized programs for a patient and indicated for specific pathologies or areas to be treated, for rapid and efficient therapies.
FISIOSONIC® PLUS is a last generation ultrasound device that uses 1-3MHz multifrequency applicators. These frequencies can be used separately or in joint mode during the treatment. Besides traditional methods, FISIOSONIC® PLUS has introduced two innovative functions: sequential treatment and automatic frequency switching.
The sequential treatment offers the operator the opportunity of using multidisc scanning applicators with a wide contact surface to be applied by common elastic straps. The ultrasound emission is sequential and allows the operator to carry out an automatic treatment on a wide surface with no need for a manual dedicated intervention.
The automatic frequency switching is obtained by the exclusive A.F.S. (AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible to exploit the various focalizations of 1 and 3 MHz frequencies at the same time, allowing to set different supplying times for each frequency. This feature allows the operator to obtain a focalized action. The applicators are waterproof for underwater treatments.
The instrument can be operated in two modes: continuous and pulsed. The pulsed operating mode permits to modulate the energy (duty-cycle from 10% to 90%) in order to reduce the thermal effect and keep the peak pressure applied by the acoustic wave on the tissues steady. The output power density can be adjusted from 0 W/cm2 a 3 W/cm2.
FISIOSONIC® PLUS is equipped with self-calibration system and visual and sound contact control system. The appliance is equipped with an inlet for electrotherapy appliance connection (Modulo series); the operator can then carry out a combined therapy with any applicator.
FISIOSONIC® PLUS is equipped with a library of preset therapeutic protocols focused on severe and chronic pathologies. It provides the operator the option to create customized programs for a patient and indicated for specific pathologies or areas to be treated, for rapid and efficient therapies.
Product category: Physiotherapy equipment
MODULO and MODULO PLUS Electrotherapy
Modulo and Modulo Plus have been designed in response to an increase demand for electrotherapy devices that can be easy to use and able to comply with different therapeutic requirements.
Modulo has two completely independent stimulation channels, electrically insulated from one another.
Modulo Plus has four completely independent stimulation channels, electrically insulated from one another.
Stimulation is controlled in current (CC) and voltage (CV). Each protocol can consist of a sequence of up to 4 phases and each phase can use a different shape of wave.
Modulo and Modulo Plus offer the operator the possibility, upon stimulation, of adjusting the current intensity of the single channel or of all of them at the same time.
Modulo and Modulo Plus work plugged to the mains or with a battery.
They are devices simple to use, equipped with a wide 7’’ color touch-screen display allowing the operator to keep all functions under control.
The pleasant design and the user’s interface equipped with touch-Screen have a decidedly modern and professional look. The high generated current (over 120 mA) makes Modulo and Modulo Plus two of the most powerful devices of their category.
Operating modes and available currents:
- Stimulation of the normally innervated muscle: balanced two-phase square wave, two-phase triangular wave, Kotz currents and physiological pulse.
- Stimulation of the denervated muscle: exponential single- phase and two-phase wave, single phase and two-phase triangular wave, partially denervated.
- Antalgic currents: Diadynamic (Single-phase, syncopated single-phase, diphase, syncopated diphase, short period and long period), Interferential (Bipolar, Isoplanar, Tetrapolar and Vectorial), AMF, TENS, rectangular wave and Spike (Continuous, Burst and Random), Faradic, (Rectangular, Triangular, Exponential, Neofaradic and Traebert).
- Vehiculation currents: Ionophoresis, Iontophoresis, basic Galvanic current and Continuous Interrupted.
- Electrostimulation for Sports Medicine: balanced two-phase square wave with automatic variation of the stimulation frequency, two-phase triangular wave, Kotz currents and physiological pulse.
- Urologycal stimulation: two-phase square wave, two-phase triangular wave, physiological pulse.
- High voltage electrotherapy: positive single-phase wave, negative single-phase wave (possibility of polarity inversion).
- Microcurrent electrotherapy (MET): positive wave, negative wave, bipolar wave. The microcurrent electrotherapy, indicated to relieve pain, uses a low level current (microampere) emitted with long impulses compared to the TENS current. Unlike the latter, that have to be used in continuity to have prolonged effects, the microcurrents offer lasting and cumulative in time benefits.
- Diagnostics: I./T curve innervated and denervated with calculation of chronaxie and reobasis. Square and exponential wave.
Modulo has two completely independent stimulation channels, electrically insulated from one another.
Modulo Plus has four completely independent stimulation channels, electrically insulated from one another.
Stimulation is controlled in current (CC) and voltage (CV). Each protocol can consist of a sequence of up to 4 phases and each phase can use a different shape of wave.
Modulo and Modulo Plus offer the operator the possibility, upon stimulation, of adjusting the current intensity of the single channel or of all of them at the same time.
Modulo and Modulo Plus work plugged to the mains or with a battery.
They are devices simple to use, equipped with a wide 7’’ color touch-screen display allowing the operator to keep all functions under control.
The pleasant design and the user’s interface equipped with touch-Screen have a decidedly modern and professional look. The high generated current (over 120 mA) makes Modulo and Modulo Plus two of the most powerful devices of their category.
Operating modes and available currents:
- Stimulation of the normally innervated muscle: balanced two-phase square wave, two-phase triangular wave, Kotz currents and physiological pulse.
- Stimulation of the denervated muscle: exponential single- phase and two-phase wave, single phase and two-phase triangular wave, partially denervated.
- Antalgic currents: Diadynamic (Single-phase, syncopated single-phase, diphase, syncopated diphase, short period and long period), Interferential (Bipolar, Isoplanar, Tetrapolar and Vectorial), AMF, TENS, rectangular wave and Spike (Continuous, Burst and Random), Faradic, (Rectangular, Triangular, Exponential, Neofaradic and Traebert).
- Vehiculation currents: Ionophoresis, Iontophoresis, basic Galvanic current and Continuous Interrupted.
- Electrostimulation for Sports Medicine: balanced two-phase square wave with automatic variation of the stimulation frequency, two-phase triangular wave, Kotz currents and physiological pulse.
- Urologycal stimulation: two-phase square wave, two-phase triangular wave, physiological pulse.
- High voltage electrotherapy: positive single-phase wave, negative single-phase wave (possibility of polarity inversion).
- Microcurrent electrotherapy (MET): positive wave, negative wave, bipolar wave. The microcurrent electrotherapy, indicated to relieve pain, uses a low level current (microampere) emitted with long impulses compared to the TENS current. Unlike the latter, that have to be used in continuity to have prolonged effects, the microcurrents offer lasting and cumulative in time benefits.
- Diagnostics: I./T curve innervated and denervated with calculation of chronaxie and reobasis. Square and exponential wave.
Product category: Physiotherapy equipment
LINFOPRESS MASTER Pressure Therapy
LINFOPRESS MASTER is the latest development in peristaltic differentiated-sector pressure therapy. This type of device allows acting physiologically wherever helping for problems due to an incorrect functioning of the lymphatic or venous system is needed.
LINFOPRESS MASTER exploits a powerful and silent compressor in order to obtain inflating cycles with an accurate pressure regulation (0÷200 mmHg) in every single sector, constantly displayed on a wide backlit graphic panel.
LINFOPRESS MASTER offers the operator a wide range of preset operating programs divided into two categories: “Lower limbs” and “Upper limbs”. Additionally, it can store personalized programs in the free memories available to the purpose.
LINFOPRESS MASTER has eight independently controlled sectors, with adjustment of the pressure for each single sector (even during the treatment) for a perfect control of the pressure gradient, with display visualization.
The device is equipped of automatic sleeve emptying after treatment. The inflating sequence can be programmed entirely by the user and stored in the “User’s Program” List.
LINFOPRESS MASTER leg and arm straps utilize special construction technologies with overlapping sectors allowing treatments with no stagnation or retrogade flows. The “Professional” model includes applicators for inflating sections inside that are easily removed and with a double zip to adjust the applicators according to actual limb sizes.
LINFOPRESS MASTER is widely used in the various fields of medicine such as: phlebology, sports medicine, geriatrics, post-surgical therapies, lymphology and neuro-endocrinology. It still has a predominant role in treating lymphedemas due to venous-lymphatic insufficiences by applying a homogeneous constant massaging action.
LINFOPRESS MASTER exploits a powerful and silent compressor in order to obtain inflating cycles with an accurate pressure regulation (0÷200 mmHg) in every single sector, constantly displayed on a wide backlit graphic panel.
LINFOPRESS MASTER offers the operator a wide range of preset operating programs divided into two categories: “Lower limbs” and “Upper limbs”. Additionally, it can store personalized programs in the free memories available to the purpose.
LINFOPRESS MASTER has eight independently controlled sectors, with adjustment of the pressure for each single sector (even during the treatment) for a perfect control of the pressure gradient, with display visualization.
The device is equipped of automatic sleeve emptying after treatment. The inflating sequence can be programmed entirely by the user and stored in the “User’s Program” List.
LINFOPRESS MASTER leg and arm straps utilize special construction technologies with overlapping sectors allowing treatments with no stagnation or retrogade flows. The “Professional” model includes applicators for inflating sections inside that are easily removed and with a double zip to adjust the applicators according to actual limb sizes.
LINFOPRESS MASTER is widely used in the various fields of medicine such as: phlebology, sports medicine, geriatrics, post-surgical therapies, lymphology and neuro-endocrinology. It still has a predominant role in treating lymphedemas due to venous-lymphatic insufficiences by applying a homogeneous constant massaging action.
Product category: Physiotherapy equipment
LINFOPRESS STUDIO Pressure Therapy
LINFOPRESS STUDIO is the latest development in peristaltic differentiated-sector pressure therapy. This type of device allows acting physiologically wherever helping for problems due to an incorrect functioning of the lymphatic or venous system is needed.
LINFOPRESS STUDIO exploits a powerful and silent compressor in order to obtain inflating cycles with an accurate pressure regulation (0÷200 mmHg) in every single sector, constantly displayed on a wide backlit graphic panel.
LINFOPRESS STUDIO offers the operator a wide range of preset operating programs divided into two categories: “Lower limbs” and “Upper limbs”. Additionally, it can store personalized programs in the free memories available to the purpose.
LINFOPRESS STUDIO has six independently controlled sectors, with adjustment of the pressure for each single sector (even during the treatment) for a perfect control of the pressure gradient, with display visualization. The device is equipped of automatic sleeve emptying after treatment.
The inflating sequence can be programmed entirely by the user and stored in the “User’s Program” List. LINFOPRESS STUDIO leg and arm straps utilize special construction technologies with overlapping sectors allowing treatments with no stagnation or retrogade flows.
LINFOPRESS STUDIO is widely used in the various fields of medicine such as: phlebology, sports medicine, geriatrics, post-surgical therapies, lymphology and neuro-endocrinology.
It still has a predominant role in treating lymphedemas due to venous-lymphatic insufficiences by applying a homogeneous constant massaging action. LINFOPRESS STUDIO is also suitable for soft tissue recovery after long physical efforts in sports.
LINFOPRESS STUDIO exploits a powerful and silent compressor in order to obtain inflating cycles with an accurate pressure regulation (0÷200 mmHg) in every single sector, constantly displayed on a wide backlit graphic panel.
LINFOPRESS STUDIO offers the operator a wide range of preset operating programs divided into two categories: “Lower limbs” and “Upper limbs”. Additionally, it can store personalized programs in the free memories available to the purpose.
LINFOPRESS STUDIO has six independently controlled sectors, with adjustment of the pressure for each single sector (even during the treatment) for a perfect control of the pressure gradient, with display visualization. The device is equipped of automatic sleeve emptying after treatment.
The inflating sequence can be programmed entirely by the user and stored in the “User’s Program” List. LINFOPRESS STUDIO leg and arm straps utilize special construction technologies with overlapping sectors allowing treatments with no stagnation or retrogade flows.
LINFOPRESS STUDIO is widely used in the various fields of medicine such as: phlebology, sports medicine, geriatrics, post-surgical therapies, lymphology and neuro-endocrinology.
It still has a predominant role in treating lymphedemas due to venous-lymphatic insufficiences by applying a homogeneous constant massaging action. LINFOPRESS STUDIO is also suitable for soft tissue recovery after long physical efforts in sports.
Product category: Physiotherapy equipment
FISIOFIELD MAXI innovative technology in magnetotherapy
Fisiofield Maxi is an innovative device for magnetotherapy that generates in low and medium frequency pulsating magnetic fields.
Fisiofield Maxi is part of the new FISIOFIELD range, extending the horizons of applications using magnetic fields, in the orthopaedic and traumatology fields, as well as in sports medicine.
The operator is able to set the frequency, intensity and treatment time as well as the type of wave (square or sinusoidal) in order to obtain specific therapeutic effects (antalgic, antiedemic, trophic and stimulating action) selectively on various types of biological tissue.
Fisiofield Maxi combines the practicality of using preset programs as well as offering the option of creating new personalized programs using the available free memories.
Fisiofield Maxi is able to handle four completely independent outputs, making it possible to treat four patients with differing pathologies simoultaneously. The parameters for the programs associated with the four outputs (frequency, power, treatment time) can be set separately, allowing treatments to start at different times.
Indications:
OSTEOARTICULAR PATHOLOGIES: Consolidation delays, Pseudoarthrosis, Osteoporosis, Osteochondrosis
MUSCULOSKELETAL PATHOLOGIES
Principal Effects:
ANTALGIC EFFECT
ANTI-INFLAMMATORY EFFECT
DRAINING EFFECT
SOFT TISSUES AND BONES STIMULATION
The wide choice of configurations provided, its unique characteristics such as two wave forms (square or sinusoidal), and the option of working at low or medium frequency allowing it to satisfay any therapeutic need.
The generator puts out a high peak power of at least 100 Gauss on each applicator.
The compact generator makes this unit easy to use in any setting.
The user interface equipped with keyboard and graphic display, available also in 7’’ Touch Screen color version, has a decidedly modern and professional look.
To guarantee the safety of the operator and those nearby, Fisiofield Maxi uses a new L.S.F. (LOW SCATTERED FIELD) device, that significantly reduces unwanted radiation outside the applicators.
The high quality of the materials used in building the Fisiofield Maxi, make this instrument reliable and give it a long working life.
Product category: Physiotherapy equipment
FISIOFIELD MIDDLE Magnetotherapy
FISIOFIELD MIDDLE is an innovative device for magnetotherapy that generates in low and medium frequency pulsating magnetic fields. FISIOFIELD MIDDLE is part of the new FISIOFIELD range, extending the horizons of applications using magnetic fields, in the orthopaedic and traumatology fields, as well as in sports medicine.
The operator is able to set the frequency, intensity and treatment time as well as the type of wave (square or sinusoidal) in order to obtain specific therapeutic effects (antalgic, antiedemic, trophic and stimulating action) selectively on various types of biological tissue. FISIOFIELD MIDDLE combines the practicality of using preset programs as well as offering the option of creating new personalized programs using the available free memories.
FISIOFIELD MIDDLE is able to handle three completely independent outputs, making it possible to treat three patients with differing pathologies simoultaneously. The parameters for the programs associated with the three outputs (frequency, power, treatment time) can be set separately, allowing treatments to start at different times.
Indications:
OSTEO-ARTICULAR PATHOLOGIES: consolidation delays, pseudoarthrosis, osteoporosis, osteochondrosis
MUSCULO-SKELETAL PATHOLOGIES
The operator is able to set the frequency, intensity and treatment time as well as the type of wave (square or sinusoidal) in order to obtain specific therapeutic effects (antalgic, antiedemic, trophic and stimulating action) selectively on various types of biological tissue. FISIOFIELD MIDDLE combines the practicality of using preset programs as well as offering the option of creating new personalized programs using the available free memories.
FISIOFIELD MIDDLE is able to handle three completely independent outputs, making it possible to treat three patients with differing pathologies simoultaneously. The parameters for the programs associated with the three outputs (frequency, power, treatment time) can be set separately, allowing treatments to start at different times.
Indications:
OSTEO-ARTICULAR PATHOLOGIES: consolidation delays, pseudoarthrosis, osteoporosis, osteochondrosis
MUSCULO-SKELETAL PATHOLOGIES
Product category: Physiotherapy equipment
FISIOWAVE innovative technology in radar therapy
FISIOWAVE is a new, high quality instrument for microwave therapy. Radar therapy is part of the thermotherapies family and uses the electromagnetic waves of the microwaves frecuency band, which generate heat in treated tissues; an analgesic effect is consequently obtained, thanks to the heat that is deeply transmitted.
FISIOWAVE is equipped with an automatic regulation, POWERFUL SELF-PROTECTING GENERATOR (magnetron) with pulsed and continuous emission to obtain a peak power of 1600 Watt and a mean power equal to 250W.
The elevated PEAK POWER of FISIOWAVE allows for the administering of considerable energy in depth, for quick and efficient treatments in full safety for both patient and operator. FISIOWAVE is equipped with different safety systems which intervene in the case of improper supply or any malfunctions.
Interactive technology
Its easy set up and parameter controls, shown on a large backlit graphic display, as well as the simplicity in connecting available antennas make FISIOWAVE an extremely practical instrument. All parameters are managed and monitored by a state-of-the-art microcontroller.
Therapeutic protocols
FISIOWAVE offers 50 preset therapeutic protocols and 50 free memories for user protocols.
Articulated arm
FISIOWAVE has been carefully designed, with particular care to the functionality of the articulated arm, which allows for a full range of movement and easily supports, without problems, any type of antenna supplied with the equipment.
FISIOWAVE is equipped with an automatic regulation, POWERFUL SELF-PROTECTING GENERATOR (magnetron) with pulsed and continuous emission to obtain a peak power of 1600 Watt and a mean power equal to 250W.
The elevated PEAK POWER of FISIOWAVE allows for the administering of considerable energy in depth, for quick and efficient treatments in full safety for both patient and operator. FISIOWAVE is equipped with different safety systems which intervene in the case of improper supply or any malfunctions.
Interactive technology
Its easy set up and parameter controls, shown on a large backlit graphic display, as well as the simplicity in connecting available antennas make FISIOWAVE an extremely practical instrument. All parameters are managed and monitored by a state-of-the-art microcontroller.
Therapeutic protocols
FISIOWAVE offers 50 preset therapeutic protocols and 50 free memories for user protocols.
Articulated arm
FISIOWAVE has been carefully designed, with particular care to the functionality of the articulated arm, which allows for a full range of movement and easily supports, without problems, any type of antenna supplied with the equipment.
Product category: Laser surgery equipment, Laser therapy equipment
LUMIX SURGERY, surgical laser powerful and versatile for multiple applications
LUMIX® SURGERY is the surgical laser that allows 2 actions in a single device:
Cut
Coagulation
LUMIX® SURGERY allows a double operating mode:
Surgical: continuous, burst mode with adjustable action time
Therapeutic (optional): continuous, frequenced and modulated
Using the contact mode fiber, LUMIX® SURGERY is the evolution of the common blade, with unique particulars like biostimulating, anti-inflammatory and antalgic actions.
Advantages of LUMIX® SURGERY:
Extremely tolerable treatment
Reduced healing times
Minimum or no bleeding at all
Reduced or no post-surgery infections at all
Maximum precision in the cut of soft tissues
Essential for microsurgery: avoids the need of stitches
Coagulation ability
Less impact both for treated tissues and for surroundings tissues
Less post-surgery pain
Less post-surgery edema
No traction of the tissues in the healing phase
Better tissues aesthetics in the post-surgery phase
Better healing
Less use of post-surgery pharmacological treatments
Three available wavelengths
810nm
980nm
1064nm Solid YAG
INDICATIONS:
DERMATOLOGY: Skin fibroma, pendulous fibroma, naevi, seborrheic keratosis, skin stains, xanthelasma, cysts, lipoma, papillomas, warts.
AESTHETIC MEDICINE AND SURGERY: Barcode, face traction, soft blepharoplasty.
SOFT TISSUE SURGERY
VASCULAR SURGERY PHLEBOLOGY
GYNECOLOGICAL SURGERY
PROCTOLOGY OTORHINOLARYNGOLOGY
Cut
Coagulation
LUMIX® SURGERY allows a double operating mode:
Surgical: continuous, burst mode with adjustable action time
Therapeutic (optional): continuous, frequenced and modulated
Using the contact mode fiber, LUMIX® SURGERY is the evolution of the common blade, with unique particulars like biostimulating, anti-inflammatory and antalgic actions.
Advantages of LUMIX® SURGERY:
Extremely tolerable treatment
Reduced healing times
Minimum or no bleeding at all
Reduced or no post-surgery infections at all
Maximum precision in the cut of soft tissues
Essential for microsurgery: avoids the need of stitches
Coagulation ability
Less impact both for treated tissues and for surroundings tissues
Less post-surgery pain
Less post-surgery edema
No traction of the tissues in the healing phase
Better tissues aesthetics in the post-surgery phase
Better healing
Less use of post-surgery pharmacological treatments
Three available wavelengths
810nm
980nm
1064nm Solid YAG
INDICATIONS:
DERMATOLOGY: Skin fibroma, pendulous fibroma, naevi, seborrheic keratosis, skin stains, xanthelasma, cysts, lipoma, papillomas, warts.
AESTHETIC MEDICINE AND SURGERY: Barcode, face traction, soft blepharoplasty.
SOFT TISSUE SURGERY
VASCULAR SURGERY PHLEBOLOGY
GYNECOLOGICAL SURGERY
PROCTOLOGY OTORHINOLARYNGOLOGY
Product category: Laser surgery equipment, Laser therapy equipment
LUMIX® Q Platform, innumerable possibilities in Surgery and in Therapy, thanks to Nd:YAG Q-Switched laser platform
LUMIX® Q Platform is the state-of-the-art multifunctional Laser platform which offers the maximum power and versatility in an extracompact design.
The unique features of LUMIX® Q Platform:
1064nm: the ideal wavelength
1064nm is the wavelength farthest from the point of maximum melanin absorption and therefore less sensitive to phototype complexion.
The high directionality of this wavelength allows to reach the affected area with the correct dose of energy. A rapid antalgic effect with control of inflammatory processes and deep activation of the metabolic processes of cellular activities is obtained.
The characteristics of this wavelength in surgery are: excellent vaporization capacity, good haemostasis and reduced possibility of tissue necrosis.
The most powerful Therapeutic Nd: Yag Laser: 130.000 Watts of power
The exclusive Nd:Yag Q-Switched System (1064nm) adopted by Fisioline®allows to combine peculiar characteristics such as the highest peak power ever achieved by a Laser in Physical Therapy (up to 130kW) and the high average power (up to at 20W), which is essential for laser Surgery. For the reasons previously mentioned, LUMIX® Q Platform is a powerful, extremely performing and unique laser.
The nano-pulses of LUMIX® Q Platform derive from Nanotechnology: from 7ns up to 35ns
The Q-switched Laser emits the light beam within the nanosecond range. The brevity and specificity of the light beam limits the heat emission to the surrounding tissues, concentrating efficacy only where needed.
The nano-pulses allow to supply large amounts of energy without elevated thermal cutaneous effects. There is no need of cryotherapy, thanks to the minimal superficial thermal effect.
INDICATIONS:
SURGERY
The unique features of LUMIX® Q Platform:
- Power: 130kW = 130.000W
- Average power: 20W
- Superpulsation: 1-100.000Hz
- Q-Switched Pulsed: from 7ns up to 35ns
- PQP: from 250μs to 50ms
- Burst mode Continuous: TOn up to 100ms
- The widest range of procedures and treatments in one device
- Maximum precision, efficacy and safety of treatments
- Extremely fast learning curve thanks to the Wizard and the LUMIX®Assistant
- Minimally invasive and safe treatments with reduced downtime
- Great patients’ comfort and satisfaction
- Immediate access to preset procedures through a large display
- Wireless pedal to freely and easily control the system
- Rapid release mechanism to quickly change the terminals
- High-performance extracompact Laser System
1064nm: the ideal wavelength
1064nm is the wavelength farthest from the point of maximum melanin absorption and therefore less sensitive to phototype complexion.
The high directionality of this wavelength allows to reach the affected area with the correct dose of energy. A rapid antalgic effect with control of inflammatory processes and deep activation of the metabolic processes of cellular activities is obtained.
The characteristics of this wavelength in surgery are: excellent vaporization capacity, good haemostasis and reduced possibility of tissue necrosis.
The most powerful Therapeutic Nd: Yag Laser: 130.000 Watts of power
The exclusive Nd:Yag Q-Switched System (1064nm) adopted by Fisioline®allows to combine peculiar characteristics such as the highest peak power ever achieved by a Laser in Physical Therapy (up to 130kW) and the high average power (up to at 20W), which is essential for laser Surgery. For the reasons previously mentioned, LUMIX® Q Platform is a powerful, extremely performing and unique laser.
The nano-pulses of LUMIX® Q Platform derive from Nanotechnology: from 7ns up to 35ns
The Q-switched Laser emits the light beam within the nanosecond range. The brevity and specificity of the light beam limits the heat emission to the surrounding tissues, concentrating efficacy only where needed.
The nano-pulses allow to supply large amounts of energy without elevated thermal cutaneous effects. There is no need of cryotherapy, thanks to the minimal superficial thermal effect.
INDICATIONS:
SURGERY
- Soft tissue surgery
- Vascular surgery and phlebology
- Gynecological surgery
- Proctology surgery
- Otorhinolaryngology (ent)
- Laser endoscopy
- Laser laparoscopy
- Skin fibroma
- Pendulous fibroma
- Naevi
- Seborrheic keratosis
- Skin stains
- Xanthelasma
- Cysts
- Lipoma
- Papillomas
- Warts
- EndoLaserLift
- Barcode
- Face traction
- Soft Blepharoplasty
- Wrinkle traction
- Laser lipolysis
- Lipoma removal
- Removal of post-filler granulomas
- Bone and Tissue Biostimulation
- Pain Therapy
- Post-traumatic
- Anti-inflammatory
- Localized Anti-edema
- Rehabilitation Therapy
- Acupuncture without needles
- Combination with PRP
- Anti-age action
- Photorejuvenation
- Photobiostimulation
- Acne/ Post-acne scars
- Bullous dermatitis
- Ulcers
- Skin Toning
- Healing
- Biostimulation
- Ulcers
- Onychomycosis
- Warts
- PDT (Laser PhotoDynamic Therapy)
Product category: Laser therapy equipment
Lumix® Epil Med Dual version, the new multi-wavelength diode laser for epilation
Lumix® Epil Med Dual version is an innovative laser technology at double wavelength of 808-1064nm for progressive and permanent epilation. Lumix® Epil Med Dual version generates a laser beam with the combined action of two synergic wavelengths: 808nm and 1064nm.
The laser light penetrates the skin and it is absorbed by hair pigments inside the piliferous bulbs, with a subsequent rise in temperature and permanent destruction of hair follicle germ cells. The result is progressive and permanent depilation through the principle of selective photothermolysis.
Lumix® Epil Med Dual version adopts the Dual Wave System: the perfect combination of power (808nm) and efficiency (1064nm). The perfect mixing of the two wavelengths 808 and 1064nm simultaneously emitted, allows a wider field of action, guaranteeing a safer and even more effective epilation. Lumix® Epil Med Dual version offers extensive versatility and ease of use.
The pluses
Two independent water cooling systems
Lumix® Epil Med Dual version features a double and integrated cooling system: the Skin Cooling system, through peltier cells,
guaranteeing greater client safety and comfort during treatment, and Chiller Cooling system, featuring chillers for laser source temperature control.
Skin Cooling System up to -10°C
Thanks to the innovative system, the patient‘s skin is double cooled: both before and after the spot. Cooling ensures a great client comfort during Lumix® Epil Med Dual version treatment: the area becomes desensitized before emission and the skin is refreshed after the spot, while guaranteeing maximum freedom of movement for the operator.
Chiller Cooling System
The entirely automatic Chiller Cooling system maintains a constant cooling system liquid temperature, thus preventing the device and laser source from over-heating. This system enables prolonged device use; the operator can complete treatments over extensive parts of the body, with guaranteed source duration.
Handpiece Dual for even faster treatments
The laser device is equipped with an ergonomic handpiece, specifically designed by Fisioline® and which ensures highly effective and fast treatment. The Lumix® Epil Med Dual version handpiece has a spot area of 3.0 cm2 and it is separable from the device. It ensures simple management and optimal maintenance.
It is a highly manageable applicator, compact and small in size. The handpiece holder rod, an integral part of equipment, ensures that operators do not become tired during application.
The laser light penetrates the skin and it is absorbed by hair pigments inside the piliferous bulbs, with a subsequent rise in temperature and permanent destruction of hair follicle germ cells. The result is progressive and permanent depilation through the principle of selective photothermolysis.
Lumix® Epil Med Dual version adopts the Dual Wave System: the perfect combination of power (808nm) and efficiency (1064nm). The perfect mixing of the two wavelengths 808 and 1064nm simultaneously emitted, allows a wider field of action, guaranteeing a safer and even more effective epilation. Lumix® Epil Med Dual version offers extensive versatility and ease of use.
The pluses
- Dual Handpiece: 1700W of power
- Double wavelength: 808-1064 nm
- Controlled energy over 100 Joule
- Chiller Cooling System: cooling with chiller
- Skin Cooling System: cooling with semiconductor (peltier)
- Sapphire cooling up to -10°C on contact
- Maximum irradiated area 3cm2
- Operating modes: Single Pulse (5ms); Modulated Pulse (up to 20 Hz)
- Wizard: a veritable digital guide to laser technology use
- Preset programs of treatment for woman and man
Two independent water cooling systems
Lumix® Epil Med Dual version features a double and integrated cooling system: the Skin Cooling system, through peltier cells,
guaranteeing greater client safety and comfort during treatment, and Chiller Cooling system, featuring chillers for laser source temperature control.
Skin Cooling System up to -10°C
Thanks to the innovative system, the patient‘s skin is double cooled: both before and after the spot. Cooling ensures a great client comfort during Lumix® Epil Med Dual version treatment: the area becomes desensitized before emission and the skin is refreshed after the spot, while guaranteeing maximum freedom of movement for the operator.
Chiller Cooling System
The entirely automatic Chiller Cooling system maintains a constant cooling system liquid temperature, thus preventing the device and laser source from over-heating. This system enables prolonged device use; the operator can complete treatments over extensive parts of the body, with guaranteed source duration.
Handpiece Dual for even faster treatments
The laser device is equipped with an ergonomic handpiece, specifically designed by Fisioline® and which ensures highly effective and fast treatment. The Lumix® Epil Med Dual version handpiece has a spot area of 3.0 cm2 and it is separable from the device. It ensures simple management and optimal maintenance.
It is a highly manageable applicator, compact and small in size. The handpiece holder rod, an integral part of equipment, ensures that operators do not become tired during application.
Product category: Laser therapy equipment
Lumix® Epil Med Power Plus version, the new high power diode laser 808 nm for epilation
Lumix® Epil Med Power Plus version is the new frontier for the permanent and progressive epilation of unwanted hairs using laser technology.
The device generates a laser beam with a specific wavelength, 808nm, which penetrates the skin and is absorbed by hairs from within hair follicles, with a subsequent rise in temperature and permanent destruction of hair follicle germ cells.
The result is permanent depilation through the principle of selective photothermolysis. Lumix® Epil Med Power Plus version offers extensive versatility and ease of use.
The pluses
Lumix® Epil Med Power Plus version features a double and integrated cooling system: the Skin Cooling Power Plus, through Peltier cells, guaranteeing greater client safety and comfort during treatment, and Chiller Cooling system, featuring chillers for laser.
Handpiece Plus for even faster treatments
The laser device is equipped with an ergonomic handpiece, specifically designed by Fisioline® and which ensures highly effective and fast treatment.
The Lumix® Epil Med Power Plus version handpiece has a spot area of 3.0 cm2 and it is separable from the device. It ensures simple management and optimal maintenance.
It is a highly manageable applicator, compact and small in size. The handpiece holder rod, an integral part of equipment, ensures that operators do not become tired during application.
The device generates a laser beam with a specific wavelength, 808nm, which penetrates the skin and is absorbed by hairs from within hair follicles, with a subsequent rise in temperature and permanent destruction of hair follicle germ cells.
The result is permanent depilation through the principle of selective photothermolysis. Lumix® Epil Med Power Plus version offers extensive versatility and ease of use.
The pluses
- Handpiece “Plus”: 2000W of power
- Controlled energy over 100 Joule
- Chiller Cooling System: cooling with chiller
- Skin Cooling Power Plus System: cooling with semiconductor (peltier)
- Sapphire cooling -10°C on contact
- Maximum irradiated area 3cm2
- Operating modes: Single Pulse (5ms); Modulated Pulse (up to 20 Hz)
- Wizard: a veritable digital guide to laser technology use
- Preset programs of treatment protocols for woman and man
Lumix® Epil Med Power Plus version features a double and integrated cooling system: the Skin Cooling Power Plus, through Peltier cells, guaranteeing greater client safety and comfort during treatment, and Chiller Cooling system, featuring chillers for laser.
Handpiece Plus for even faster treatments
The laser device is equipped with an ergonomic handpiece, specifically designed by Fisioline® and which ensures highly effective and fast treatment.
The Lumix® Epil Med Power Plus version handpiece has a spot area of 3.0 cm2 and it is separable from the device. It ensures simple management and optimal maintenance.
It is a highly manageable applicator, compact and small in size. The handpiece holder rod, an integral part of equipment, ensures that operators do not become tired during application.
Product category: Laser therapy equipment
Lumix® Epil Med, high speed diode laser 808nm for Hair removal
The basic principle of the Lumix® Epil Med is to administer energy in the form of laser light at a wavelength of 808nm.
Lumix® Epil Med is synonymous with safety and effectiveness: it can even be used to treat darker phototypes (from phototype I to phototype VI).
Lumix® Epil Med offers extensive versatility and ease of use in different fields of application.
The pluses
Indications
Epilation
permanent and progressive epilation of unwanted through the principle of selective photothermolysis.
Skin rejuvenation – Skin refreshing
Stimulation of new collagen for improved overall skin tone and texture of face, neck, décolleté and hands and a reduction in wrinkles, resulting in an overall face-lift effect.
Acne
Reduction of the inflammatory process and therefore the treatment of clinically active lesions effectively contrasting atrophic scarring processes
Two independent water cooling systems
Lumix® Epil Med features a double and integrated cooling system: the A.S.C. Active Skin Cooling, through Peltier cells, guaranteeing greater patient
safety and comfort during treatment, and A.C.C. Active Chiller Cooling, featuring chillers for laser source temperature control.
Multifunction handpiece for fast and effective treatments
The laser device is equipped with an ergonomic handpiece, specifically designed by Fisioline® and which ensures highly effective and fast treatment. The Lumix® Epil Med handpiece is separable from the device. It ensures simple management and optimal maintenance.
It is a highly manageable applicator, compact and small in size. The handpiece holder rod, an integral part of equipment, ensures that operators do not become tired during application.
Lumix® Epil Med is synonymous with safety and effectiveness: it can even be used to treat darker phototypes (from phototype I to phototype VI).
Lumix® Epil Med offers extensive versatility and ease of use in different fields of application.
The pluses
- High-power handpiece: 1000W
- Wavelenght: 808nm
- controlled fluence over 100J/cm2
- Chiller Cooling System: cooling with chiller
- Skin Cooling System: cooling with semiconductor (peltier)
- Sapphire cooling -5°C on contact
- Maximum irradiated area 11x11mm
- Operating modes: single pulse (max 400ms); multiple pulse (up to 10 Hz)
- Wizard: a veritable digital guide to laser technology use
- Preset programs of treatment protocols for woman and man
Indications
Epilation
permanent and progressive epilation of unwanted through the principle of selective photothermolysis.
Skin rejuvenation – Skin refreshing
Stimulation of new collagen for improved overall skin tone and texture of face, neck, décolleté and hands and a reduction in wrinkles, resulting in an overall face-lift effect.
Acne
Reduction of the inflammatory process and therefore the treatment of clinically active lesions effectively contrasting atrophic scarring processes
Two independent water cooling systems
Lumix® Epil Med features a double and integrated cooling system: the A.S.C. Active Skin Cooling, through Peltier cells, guaranteeing greater patient
safety and comfort during treatment, and A.C.C. Active Chiller Cooling, featuring chillers for laser source temperature control.
Multifunction handpiece for fast and effective treatments
The laser device is equipped with an ergonomic handpiece, specifically designed by Fisioline® and which ensures highly effective and fast treatment. The Lumix® Epil Med handpiece is separable from the device. It ensures simple management and optimal maintenance.
It is a highly manageable applicator, compact and small in size. The handpiece holder rod, an integral part of equipment, ensures that operators do not become tired during application.
Product category: Laser therapy equipment
LUMIX® C.P.S.® Veterinary, Laser Therapy helpful to animals
LUMIX® C.P.S.® Veterinary is an innovative high power multidiode laser with C.P.S.® (Continuous, Pulsed and Superpulsed) emission that performs effective photobiostimulation in Veterinary Medicine field.
The multiwavelength C.P.S.® system
The multi wavelength of the LUMIX® C.P.S.® Veterinary, the high peak power (300W) and the high average powers that reach 31W allow for large volumetric treatments with high amount of energy deep into tissues.
Wavelength and peak power are among the essential factors for deep tissue penetration. It is important that the laser has a wavelength that falls within the so-called “THERAPEUTIC WINDOW”: LUMIX® C.P.S.®Veterinary emits wavelengths from 650 nm to 1064 nm with a peak power of 300W.
The exclusive C.P.S.® system mixes the emissions of different types of laser sources to integrate special characteristics such as high peak power of superpulsed sources and the high average power of the continuous sources. The integration is done with the available continuous sources making LUMIX® C.P.S.® Veterinary a powerful and extremely performing laser.
The pluses of C.P.S.® system
Multiwavelength selected to ensure the uniformity of energy distribution from the surface layers to deeper tissue layers
The synchronization and integration of different types of sources for direct intervention on symptomatology and etiology of diseases
The diodes superimposition implements homogeneous irradiation on one treatment spot
Reduced times
The high energy density, the different biostimulation of the different wavelengths and the thermal effect obtained as a consequence thereof, allow the user to work with extremely fast treatments and reducing the number of applications.
Indications:
BIOSTIMULATION
PAIN THERAPY antalgic effect
POST-TRAUMATIC
ANTI-INFLAMMATORY
LOCALIZED ANTI-EDEMA
ANIMAL REHABILITATION THERAPY
DERMATHOLOGY
The multiwavelength C.P.S.® system
The multi wavelength of the LUMIX® C.P.S.® Veterinary, the high peak power (300W) and the high average powers that reach 31W allow for large volumetric treatments with high amount of energy deep into tissues.
Wavelength and peak power are among the essential factors for deep tissue penetration. It is important that the laser has a wavelength that falls within the so-called “THERAPEUTIC WINDOW”: LUMIX® C.P.S.®Veterinary emits wavelengths from 650 nm to 1064 nm with a peak power of 300W.
The exclusive C.P.S.® system mixes the emissions of different types of laser sources to integrate special characteristics such as high peak power of superpulsed sources and the high average power of the continuous sources. The integration is done with the available continuous sources making LUMIX® C.P.S.® Veterinary a powerful and extremely performing laser.
The pluses of C.P.S.® system
Multiwavelength selected to ensure the uniformity of energy distribution from the surface layers to deeper tissue layers
The synchronization and integration of different types of sources for direct intervention on symptomatology and etiology of diseases
The diodes superimposition implements homogeneous irradiation on one treatment spot
Reduced times
The high energy density, the different biostimulation of the different wavelengths and the thermal effect obtained as a consequence thereof, allow the user to work with extremely fast treatments and reducing the number of applications.
Indications:
BIOSTIMULATION
PAIN THERAPY antalgic effect
POST-TRAUMATIC
ANTI-INFLAMMATORY
LOCALIZED ANTI-EDEMA
ANIMAL REHABILITATION THERAPY
DERMATHOLOGY
Product category: Laser surgery equipment
LUMIX® SURGERY Veterinary, Laser Surgery and Microsurgery for animals
With the surgical laser LUMIX® SURGERY Veterinary you can dispose of 2 actions:
Main advantages of LUMIX® SURGERY Veterinary
- Cut
- Coagulation
Main advantages of LUMIX® SURGERY Veterinary
- Treatments extremely tolerable by animals
- Reduced healing times
- Minimum or no bleeding at all
- Reduced or no post-surgery infections at all
- Maximum precision in the cut of soft tissues
- Essential for microsurgery: avoids the need of stitches
- Coagulation ability
- Less impact both for treated tissues and for surroundings tissues
- Less post-surgery pain
- Less post-surgery edema
- No traction of the tissues in the healing phase
- Better tissues aesthetics in the post-surgery phase
- Better healing
- Less use of post-surgery pharmacological treatments
- SURGICAL ONCOLOGY: Cutaneous neoplasms and of skin adnexa, oral cavity, rectum, liver, vagina (Leiomyoma), nasal squamous cell carcinoma in cats, Fibrosarcoma, Liposarcoma, malignant Melanoma, epibulbar Melanoma, Mast cell tumours, Meibomian adenoma.
- ORAL CAVITY SURGERY: Brachycephalic syndrome (stenosis of nostrils, Soft palate reduction, laryngeal ventricle eversion), Tonsillectomy, Removal of neoplasia of the mouth, Epulis, Gingivectomy, Ranual, Staphilectomy, Stomatitis and Faucitis of cat, Mucocele and salivary gland excision, Dental extraction.
- PERIANAL SURGERY: Neoplasms of the anal sack and anal glands, Perianal gland adenomas, Fistulas, Tumours, Perianal hernias.
- EAR SURGERY: Reduction of otohematoma, Ablation of the ear canal.
- UROLOGICAL SURGERY: Nephrostomy/ nephrectomy, Bladder neoplasms, Subtotal prostatectomy, Polyps, Cystotomy, Urethrostomy.
- MISCELLANEOUS: Ablation of lick granuloma, Sterlisation, Castration, Cutaneous masses (cysts, papillomas), Biopsies, Mastectomy, Sebaceous adenoma of the eyelid, Distichiasis, Verrucas.
- THERAPY (optional): Biostimulation, Antalgic therapy, Anti-inflammatory therapy, Localised anti- edemigenous, Post-traumatic, Physiotherapy.
Product category: Laser surgery equipment, Laser therapy equipment
LUMIX® SURGERY DUAL Veterinary, Surgery and Therapy all in one laser for animals
LUMIX® SURGERY DUAL Veterinary is the 1st complete system with laser sources dedicated to both Surgery and Therapy in Veterinary Medicine field.
LUMIX® SURGERY DUAL Veterinary allows the operator to work with 2 operating modes:
Surgical: continuous, burst mode with adjustable action time
Therapeutic: continuous, pulsed, superpulsed, C.P.S.®
Features
With LUMIX® SURGERY DUAL Veterinary you can dispose of two actions in a single tool: cut and coagulation.
Using the contact mode fiber, LUMIX® SURGERY DUAL Veterinary is the evolution of the common blade, with unique particulars like biostimulation and analgesia.
Main advantages compared to traditional surgical methods:
LUMIX® SURGERY DUAL Veterinary is an innovative high power multidiode laser with C.P.S.® (Continuous, Pulsed and Superpulsed) emission that performs effective photobiostimulation in Veterinary Medicine field.
The multiwavelength of the LUMIX® SURGERY DUAL Veterinary, the high peak power (300W) and the high average powers that reach 31W allow for a large volumetric treatment with high amount of energy deep into tissues. This guarantees a high tissue penetration and a fast treatment with great results.
The pluses of the therapeutic mode:
LUMIX® SURGERY DUAL Veterinary allows the operator to work with 2 operating modes:
Surgical: continuous, burst mode with adjustable action time
Therapeutic: continuous, pulsed, superpulsed, C.P.S.®
Features
- Peak power: 300W
- Average power: from 9W up to 31W
- Up to 5 available wavelengths
- Superpulsation: up to 100.000Hz
With LUMIX® SURGERY DUAL Veterinary you can dispose of two actions in a single tool: cut and coagulation.
Using the contact mode fiber, LUMIX® SURGERY DUAL Veterinary is the evolution of the common blade, with unique particulars like biostimulation and analgesia.
Main advantages compared to traditional surgical methods:
- Treatments extremely tolerable by the animals
- Reduced healing times
- Minimum or no bleeding at all
- Reduced or no post-surgery infections at all
LUMIX® SURGERY DUAL Veterinary is an innovative high power multidiode laser with C.P.S.® (Continuous, Pulsed and Superpulsed) emission that performs effective photobiostimulation in Veterinary Medicine field.
The multiwavelength of the LUMIX® SURGERY DUAL Veterinary, the high peak power (300W) and the high average powers that reach 31W allow for a large volumetric treatment with high amount of energy deep into tissues. This guarantees a high tissue penetration and a fast treatment with great results.
The pluses of the therapeutic mode:
- Multiwavelength selected to ensure the uniformity of energy distribution from the surface layers to deeper tissue layers
- The synchronization and integration of different types of sources for direct intervention on symptomatology and etiology of diseases
- The diodes superimposition implements homogeneous irradiation on one treatment spot
- BIOSTIMULATION
- PAIN THERAPY antalgic effect
- POST-TRAUMATIC
- ANTI-INFLAMMATORY
- LOCALIZED ANTI-EDEMA
- ANIMAL REHABILITATION THERAPY
- SURGICAL ONCOLOGY: Cutaneous neoplasms and of skin adnexa, oral cavity, rectum, liver, vagina (Leiomyoma), nasal squamous cell carcinoma in cats, Fibrosarcoma, Liposarcoma, malignant Melanoma, epibulbar Melanoma, Mast cell tumours, Meibomian adenoma.
- ORAL CAVITY SURGERY: Brachycephalic syndrome (stenosis of nostrils, Soft palate reduction, laryngeal ventricle eversion), Tonsillectomy, Removal of neoplasia of the mouth, Epulis, Gingivectomy, Ranual, Staphilectomy, Stomatitis and Faucitis of cat, Mucocele and salivary gland excision, Dental extraction.
- PERIANAL SURGERY: Neoplasms of the anal sack and anal glands, Perianal gland adenomas, Fistulas, Tumours, Perianal hernias.
- EAR SURGERY: Reduction of otohematoma, Ablation of the ear canal.
- UROLOGICAL SURGERY: Nephrostomy/ nephrectomy, Bladder neoplasms, Subtotal prostatectomy, Polyps, Cystotomy, Urethrostomy.
- MISCELLANEOUS: Ablation of lick granuloma, Sterlisation, Castration, Cutaneous masses (cysts, papillomas), Biopsies, Mastectomy, Sebaceous adenoma of the eyelid, Distichiasis, Verrucas.
Product category: Physiotherapy equipment
FISIOSONIC® Veterinary, the multifrequency ultrasound in class E for lesions and muscle contractures of animals
FISIOSONIC® Veterinary is a new, small size ultrasound device, for physiotherapy and rehabilitation, using an innovative output stage called class E.
The mechanical efficiency obtained through the output stage in class E is decidedly higher than the one that can be obtained by means of traditional output stages and allows the operator to issue high powers on the patient in a constant and controlled way in relation to impedance of the tissues and with a limited thermal effect.
Multifrequency applicators
FISIOSONIC® Veterinary is a last generation ultrasound device that uses 1 and 3 MHz multifrequency applicators. These frequencies can be used separately or in joint mode during the treatment.
Besides traditional methods, FISIOSONIC® Veterinary has introduced two innovative functions: sequential treatment and automatic frequency switching.
Sequential treatment
The sequential treatment offers the operator the opportunity of using multidisc scanning applicators with a wide contact surface to be applied by common elastic straps. The ultrasound emission is sequential and allows the operator to carry out an automatic treatment on a wide surface with no need for a manual dedicated intervention.
Automatic frequency switching
The automatic frequency switching is obtained by the exclusive A.F.S. (AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible to exploit the various focalizations of 1 and 3 MHz frequencies at the same time, allowing to set different supplying times for each frequency. This feature allows the operator to obtain a focalized action.
Two operating modes: continuous and pulsed
The pulsed operating mode permits to modulate the energy (duty-cycle from 10% to 90%) in order to reduce the thermal effect and keep the peak pressure applied by the acoustic wave on the tissues steady. The output power density can be adjusted from 0 W/cm2 to 3 W/cm2.
Therapeutic indications
Preset therapeutic protocols
FISIOSONIC® Veterinary is equipped with preset programs for the main pathologies and free storage locations for personalized programs.
FISIOSONIC® Veterinary provides the operator the option to create customized programs for a patient and indicated for specific pathologies or areas to be treated, for rapid and efficient therapies.
The mechanical efficiency obtained through the output stage in class E is decidedly higher than the one that can be obtained by means of traditional output stages and allows the operator to issue high powers on the patient in a constant and controlled way in relation to impedance of the tissues and with a limited thermal effect.
Multifrequency applicators
FISIOSONIC® Veterinary is a last generation ultrasound device that uses 1 and 3 MHz multifrequency applicators. These frequencies can be used separately or in joint mode during the treatment.
Besides traditional methods, FISIOSONIC® Veterinary has introduced two innovative functions: sequential treatment and automatic frequency switching.
Sequential treatment
The sequential treatment offers the operator the opportunity of using multidisc scanning applicators with a wide contact surface to be applied by common elastic straps. The ultrasound emission is sequential and allows the operator to carry out an automatic treatment on a wide surface with no need for a manual dedicated intervention.
Automatic frequency switching
The automatic frequency switching is obtained by the exclusive A.F.S. (AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible to exploit the various focalizations of 1 and 3 MHz frequencies at the same time, allowing to set different supplying times for each frequency. This feature allows the operator to obtain a focalized action.
Two operating modes: continuous and pulsed
The pulsed operating mode permits to modulate the energy (duty-cycle from 10% to 90%) in order to reduce the thermal effect and keep the peak pressure applied by the acoustic wave on the tissues steady. The output power density can be adjusted from 0 W/cm2 to 3 W/cm2.
Therapeutic indications
- decalcification
- reduction of soft tissues fibrocalcific lesions
- articular/tissue mobility and distensibility improvement
- chronic degenerative processes
- tendineous, ligamentous and muscle pathologies
Preset therapeutic protocols
FISIOSONIC® Veterinary is equipped with preset programs for the main pathologies and free storage locations for personalized programs.
FISIOSONIC® Veterinary provides the operator the option to create customized programs for a patient and indicated for specific pathologies or areas to be treated, for rapid and efficient therapies.
Product category: Physiotherapy equipment
Fisioline RADIANT® Veterinary, Monopolar – Bipolar – Tripolar systems for T.E.C.A.R. Therapy for animals
Fisioline RADIANT® Veterinary is a radiofrequency generator which administers energy via the passing of an electrical current with monopolar, bipolar and tripolar, capacitive or resistive effects.
The basic principle of radiofrequency is heat induction by means of the administration of electromagnetic waves to stimulate natural rehabilitation and anti-inflammatory processes within biological structures.
Two modes of heat transmission
The different modes of thermal energy generation and transmission, capacitive and resistive, related to the target tissue typology and to the therapeutic objectives, allow the therapist the optimal ways to use the antalgic,
trophic and mechanical properties of the checked administration of the heat, in the different phases post-traumas until the complete functional and anatomical recovery.
Capacitive mode
Medium-low levels: acute pathologies, muscular traumatology, edema treatment
Higher levels: chronic pathologies, pain treatment
Resistive mode
The basic principle of radiofrequency is heat induction by means of the administration of electromagnetic waves to stimulate natural rehabilitation and anti-inflammatory processes within biological structures.
Two modes of heat transmission
The different modes of thermal energy generation and transmission, capacitive and resistive, related to the target tissue typology and to the therapeutic objectives, allow the therapist the optimal ways to use the antalgic,
trophic and mechanical properties of the checked administration of the heat, in the different phases post-traumas until the complete functional and anatomical recovery.
Capacitive mode
Medium-low levels: acute pathologies, muscular traumatology, edema treatment
Higher levels: chronic pathologies, pain treatment
Resistive mode
- Osteoarticular pathologies
- General traumatology
- Arthrosis, enthesis
- Tendinitis, capsulitis, bursitis
Product category: Physiotherapy equipment
O.P.A.F.® THERAPY Veterinary the High-frequency soundproof Pressure Waves for animals
O.P.A.F.® THERAPY Veterinary introduces a new method that, by exploiting modulated frequencies and varying emission, provides high power energies to tissues at different depths. The operator can now use an equipment that is safe, effective, highly tolerated by animals and usable for multiple pathologies.
Moreover, since the device works silently, the treatment can be carried out in a comfortable way and without scaring the animal. The therapy is performed with the animal in place without sedation.
Incomparable power
O.P.A.F.® THERAPY Veterinary adopts an innovative multi-frequency piezoelectric disc 1 and 3 MHz with peak power density 5 W/cm2, a basic feature to transfer greats amounts of mechanical energy deep in tissues.
High power focalized action shocks in depth
O.P.A.F.® THERAPY Veterinary is equipped with ONESHOT function, with controlled activation for high-dose focalized treatments. The ONESHOT function allows to exploit the energy emission at the maximum power (5W/cm2) in just one SHOT. Due to the high mechanical effect, the disintegration of calcifications is the main application of this particular function.
Thanks to an innovative output Stage in Class E, introduced by Fisioline®, the power transmission to tissues by the O.P.A.F.®THERAPY Veterinary applicator is optimized and maximized. An instrument to detect the reference signal constantly analyzes the variation of impedance of treated tissues keeping the power density (W/cm2) automatically constant as established by the operator. The dispersion of energy is insignificant and the emitted energy is actually the selected one. This feature maintains the desired mechanical effect through the passing of the pressure wave to the different tissues.
Focalization of the emission beam
By setting different emission times for each frequency, operators obtain a double combined action with a variable effect: mechanical and thermal effects. The mechanical action reduces and resolves calcifications, the immediate release of joints and reabsorption of intramuscular liquids. The thermal effect, superficial and deep, interacts directly with the displacement of liquids and promotes lymphatic drainage.
Maximum tolerability of the treatment
The pain sensation is significantly lower compared to conventional shockwave devices. O.P.A.F.® THERAPY Veterinary is also well-tolerated by the animal because it doesn’t emit a noise.
Therapeutic indications
O.P.A.F.® THERAPY Veterinary is effective immediately from the first session on many pathologies such as bursitis, articular rigidity, muscle contractures and fibrous adhesions.
Rehabilitation, physiotherapy and traumatology
The biological answer to the treatment with O.P.A.F.® THERAPY Veterinary is the vascularization of the treated tissues and activation of new cells, essentials in healing processes.
This results in relief of pain and promotion of tissue regeneration. After the treatment with O.P.A.F.® THERAPY, tissues react with an increase in metabolic activity.
Moreover, since the device works silently, the treatment can be carried out in a comfortable way and without scaring the animal. The therapy is performed with the animal in place without sedation.
Incomparable power
O.P.A.F.® THERAPY Veterinary adopts an innovative multi-frequency piezoelectric disc 1 and 3 MHz with peak power density 5 W/cm2, a basic feature to transfer greats amounts of mechanical energy deep in tissues.
High power focalized action shocks in depth
O.P.A.F.® THERAPY Veterinary is equipped with ONESHOT function, with controlled activation for high-dose focalized treatments. The ONESHOT function allows to exploit the energy emission at the maximum power (5W/cm2) in just one SHOT. Due to the high mechanical effect, the disintegration of calcifications is the main application of this particular function.
Thanks to an innovative output Stage in Class E, introduced by Fisioline®, the power transmission to tissues by the O.P.A.F.®THERAPY Veterinary applicator is optimized and maximized. An instrument to detect the reference signal constantly analyzes the variation of impedance of treated tissues keeping the power density (W/cm2) automatically constant as established by the operator. The dispersion of energy is insignificant and the emitted energy is actually the selected one. This feature maintains the desired mechanical effect through the passing of the pressure wave to the different tissues.
Focalization of the emission beam
By setting different emission times for each frequency, operators obtain a double combined action with a variable effect: mechanical and thermal effects. The mechanical action reduces and resolves calcifications, the immediate release of joints and reabsorption of intramuscular liquids. The thermal effect, superficial and deep, interacts directly with the displacement of liquids and promotes lymphatic drainage.
Maximum tolerability of the treatment
The pain sensation is significantly lower compared to conventional shockwave devices. O.P.A.F.® THERAPY Veterinary is also well-tolerated by the animal because it doesn’t emit a noise.
Therapeutic indications
- Tendinous pathologies: the focus of treatment is to resolve tendinopathies in both chronic and acute phases
- Ligamentous pathologies: the focus of treatment is for pain relief and reduction of inflammation
- Muscular pathologies: antalgic effects, relaxing effects, de-fibrotic action, trophic effects
- Scar adhesions
- Inflammation
- Stiffness and joint degeneration
- Peripheral neuropatic pain
- Neurities in general
- Musculotendinous calcifications: with the O.P.A.F.® THERAPY Veterinary frequency switching, operators can treat calcifications with a great “disrupting” action that is well-tolerated by animals
- Improves callus formation
O.P.A.F.® THERAPY Veterinary is effective immediately from the first session on many pathologies such as bursitis, articular rigidity, muscle contractures and fibrous adhesions.
Rehabilitation, physiotherapy and traumatology
The biological answer to the treatment with O.P.A.F.® THERAPY Veterinary is the vascularization of the treated tissues and activation of new cells, essentials in healing processes.
This results in relief of pain and promotion of tissue regeneration. After the treatment with O.P.A.F.® THERAPY, tissues react with an increase in metabolic activity.
Product category: Physiotherapy equipment
FISIOFIELD MIDDLE Veterinary, magnetotherapy for musculo-skeletal pathologies on animals
FISIOFIELD MIDDLE Veterinary is an innovative device for magnetotherapy that generates in low and medium frequency pulsating magnetic fields in orthopedy, physiotherapy and veterinary rehabilitation.
Two wave shapes, several therapeutic effects
The operator is able to set the frequency, intensity and treatment time as well as the type of wave (square or sinusoidal) in order to obtain specific therapeutic effects (antalgic, antiedemigen, trophic and stimulating action) selectively on various types of biological tissue.
Three outputs to treat more areas
FISIOFIELD MIDDLE Veterinary is able to handle three completely independent outputs, making it possible to treat three animals with differing pathologies or three areas of the same animal simultaneously.
The parameters for the programs associated with the three outputs (frequency, power, treatment time) can be set separately, allowing treatments to start at different times.
Performing and versatile
The wide choice of configurations provided, its unique characteristics such as two wave forms (square or sinusoidal), and the option of working at low or medium frequency allowing it to satisfy any therapeutic need.
The generator puts out a high peak power of at least 100 Gauss on each applicator. The compact generator makes this unit easy to use in any setting.
Therapeutic indications
FISIOFIELD MIDDLE Veterinary can be used on a daily basis to treat musculoskeletal pathologies of dog, cat and horse painlessly.
FISIOFIELD MIDDLE Veterinary is specific for: musculoskeletal pathologies, osteoarticular pathologies, consolidation delays, pseudoarthrosis, osteoporosis, osteochondrosis.
Two wave shapes, several therapeutic effects
The operator is able to set the frequency, intensity and treatment time as well as the type of wave (square or sinusoidal) in order to obtain specific therapeutic effects (antalgic, antiedemigen, trophic and stimulating action) selectively on various types of biological tissue.
Three outputs to treat more areas
FISIOFIELD MIDDLE Veterinary is able to handle three completely independent outputs, making it possible to treat three animals with differing pathologies or three areas of the same animal simultaneously.
The parameters for the programs associated with the three outputs (frequency, power, treatment time) can be set separately, allowing treatments to start at different times.
Performing and versatile
The wide choice of configurations provided, its unique characteristics such as two wave forms (square or sinusoidal), and the option of working at low or medium frequency allowing it to satisfy any therapeutic need.
The generator puts out a high peak power of at least 100 Gauss on each applicator. The compact generator makes this unit easy to use in any setting.
Therapeutic indications
FISIOFIELD MIDDLE Veterinary can be used on a daily basis to treat musculoskeletal pathologies of dog, cat and horse painlessly.
FISIOFIELD MIDDLE Veterinary is specific for: musculoskeletal pathologies, osteoarticular pathologies, consolidation delays, pseudoarthrosis, osteoporosis, osteochondrosis.
Product category: Physiotherapy equipment
O.P.A.F.® THERAPY: High-frequency Pressure Waves
O.P.A.F.® THERAPY introduces a new method that, by exploiting modulated frequencies and varying emission, provides high power energies to tissues at different depths. The operator can now use an equipment that is safe, effective, highly tolerated by patients and usable for multiple pathologies.
Incomparable power in your hands
O.P.A.F.® THERAPY adopts an innovative multi-frequency piezoelectric disc 1/3 MHz with peak power density 5 W/cm2, a basic feature to transfer greats amounts of mechanical energy deep in tissues.
Maximum power in ONE SHOT
O.P.A.F.® THERAPY is equipped with ONE SHOT function, with controlled activation for high-dose focalized treatments. The ONE SHOT function allows to exploit the energy emission at the maximum power (5W/cm2) in just ONE SHOT. Due to the high mechanical effect, the disintegration of calcifications is the main application of this particular function.
Thanks to an innovative output stage in class E, introduced by Fisioline®, the power transmission to tissues by the O.P.A.F.® THERAPY applicator is optimized and maximized.
An instrument to detect the reference signal constantly analyzes the variation of impedance of treated tissues keeping the power density (W/cm2) automatically constant as established by the operator.
The dispersion of energy is insignificant and the emitted energy is actually the selected one. This feature maintains the desired mechanical effect through the passing of the pressure wave to the different tissues.
THE FOCAL PRESSURE WAVE for physiotherapeutic use
O.P.A.F.® THERAPY is a medical device for ultrasound therapy that can be used autonomously both by doctors and physiotherapists.
Focalization of the emission beam
O.P.A.F.® THERAPY uses a multifrequency transducer with focalized and modulated beams. By setting different emission times for each frequency, operators obtain a double combined action with a variable effect: mechanical and thermal effects.
The mechanical action reduces and resolves calcifications, the immediate release of joints and reabsorption of intramuscular liquids. The thermal effect, superficial and deep, interacts directly with the displacement of liquids and promotes lymphatic drainage.
Maximum tolerability of the treatment
Thanks to the high-power micro-pulses of O.P.A.F.® THERAPY the patient’s tolerability is excellent among high energy pressure waves devices. The pain sensation is signifi cantly lower compared to conventional shockwave devices.
Therapeutic result: effectiveness from the first session
O.P.A.F.® THERAPY is effective immediately from the first session on many pathologies such as shoulder impingement, bursitis, trigger finger, articular rigidity, Dupuytren’s contracture, muscle contractures and fibrous adhesions.
Incomparable power in your hands
O.P.A.F.® THERAPY adopts an innovative multi-frequency piezoelectric disc 1/3 MHz with peak power density 5 W/cm2, a basic feature to transfer greats amounts of mechanical energy deep in tissues.
Maximum power in ONE SHOT
O.P.A.F.® THERAPY is equipped with ONE SHOT function, with controlled activation for high-dose focalized treatments. The ONE SHOT function allows to exploit the energy emission at the maximum power (5W/cm2) in just ONE SHOT. Due to the high mechanical effect, the disintegration of calcifications is the main application of this particular function.
Thanks to an innovative output stage in class E, introduced by Fisioline®, the power transmission to tissues by the O.P.A.F.® THERAPY applicator is optimized and maximized.
An instrument to detect the reference signal constantly analyzes the variation of impedance of treated tissues keeping the power density (W/cm2) automatically constant as established by the operator.
The dispersion of energy is insignificant and the emitted energy is actually the selected one. This feature maintains the desired mechanical effect through the passing of the pressure wave to the different tissues.
THE FOCAL PRESSURE WAVE for physiotherapeutic use
O.P.A.F.® THERAPY is a medical device for ultrasound therapy that can be used autonomously both by doctors and physiotherapists.
Focalization of the emission beam
O.P.A.F.® THERAPY uses a multifrequency transducer with focalized and modulated beams. By setting different emission times for each frequency, operators obtain a double combined action with a variable effect: mechanical and thermal effects.
The mechanical action reduces and resolves calcifications, the immediate release of joints and reabsorption of intramuscular liquids. The thermal effect, superficial and deep, interacts directly with the displacement of liquids and promotes lymphatic drainage.
Maximum tolerability of the treatment
Thanks to the high-power micro-pulses of O.P.A.F.® THERAPY the patient’s tolerability is excellent among high energy pressure waves devices. The pain sensation is signifi cantly lower compared to conventional shockwave devices.
Therapeutic result: effectiveness from the first session
O.P.A.F.® THERAPY is effective immediately from the first session on many pathologies such as shoulder impingement, bursitis, trigger finger, articular rigidity, Dupuytren’s contracture, muscle contractures and fibrous adhesions.
Company news
Date
Topic
Download
Oct 21, 2020
ENDOLASERLIFT: lifting becomes outpatient with Lumix Q Platform!
With Lumix Q Platform, Nd:YAG Q-Switched laser Platform, the 320um optical fiber is inserted into the subcutaneous tissue of the area to be treated, avoiding any kind of tissue trauma.
All the laser energy is exclusively channelled on the top of the optical fiber, so that all the power emitted by the laser could be expressed at the maximum of its performance in a single point.
The user, with a gentle movement departing all around a unique point, will move the optical fiber inside the subcutaneous tissue, by treating all the areas of interest and generating a real lifting.
The laser energy, in the form of warm, causes a shrinking of the subcutaneous tissue fibrous bundles, which will gradually shorten, producing a real lifting of the treated areas.
The aesthetic result, consequent to the biological reaction of the tissue after the laser treatment, will be partly visible in the short term and it will harmonise in the space of 2-3 months (the needed time for the fibrous bundles to shorten).
There won’t be a post-treatment crippling period, as is the case of surgical lifting. In fact it isn’t a surgical intervention, so there is no a post intervention.
It will appear just a light redness on the patient treated areas, that will disappear in the following hours, together with a very slight swelling which will vanish in the following 24-48 hours. There will be no stitches.
Therefore, in contrast to the very crippling post-intervention of the surgical lifting, due to swelling, edema, stitches, bruising, etc, with the ENDOLASERLIFT treatment, the patient will easily and immediately resume his daily lives, without reporting to no one what he has just done.
All the laser energy is exclusively channelled on the top of the optical fiber, so that all the power emitted by the laser could be expressed at the maximum of its performance in a single point.
The user, with a gentle movement departing all around a unique point, will move the optical fiber inside the subcutaneous tissue, by treating all the areas of interest and generating a real lifting.
The laser energy, in the form of warm, causes a shrinking of the subcutaneous tissue fibrous bundles, which will gradually shorten, producing a real lifting of the treated areas.
The aesthetic result, consequent to the biological reaction of the tissue after the laser treatment, will be partly visible in the short term and it will harmonise in the space of 2-3 months (the needed time for the fibrous bundles to shorten).
There won’t be a post-treatment crippling period, as is the case of surgical lifting. In fact it isn’t a surgical intervention, so there is no a post intervention.
It will appear just a light redness on the patient treated areas, that will disappear in the following hours, together with a very slight swelling which will vanish in the following 24-48 hours. There will be no stitches.
Therefore, in contrast to the very crippling post-intervention of the surgical lifting, due to swelling, edema, stitches, bruising, etc, with the ENDOLASERLIFT treatment, the patient will easily and immediately resume his daily lives, without reporting to no one what he has just done.
Oct 21, 2020
Liposuction evolution: ENDO LIPO LASER with Lumix Q PLATFORM
A new technique which uses the innovative laser Lumix Q Platform technology and brings numerous advantages and benefits in comparison with Liposuction traditional methods.
Thanks to the very thin optical fiber, the laser energy causes the liquefaction of the treated fat, with an improvement of the procedure both from the operative and aesthetic points of view.
The advantages:
Thanks to the very thin optical fiber, the laser energy causes the liquefaction of the treated fat, with an improvement of the procedure both from the operative and aesthetic points of view.
The advantages:
- less invasive treatment
- it doesn’t leave scars
- faster healing times
- ideal method to treat several parts of the body, such as hips, abdomen, inner thigh, gluteus and on little areas like mandible, under the chin and knees
- the skin has a better appearance because, thanks to the warm, a good skin retraction with a great collagen stimulation are obtained
- lower risks of bleeding and of post-surgery infections
- reduce down time
Oct 21, 2020
New Laser LUMIX C.P.S. 29Watt with 5 WAVELENGTHS and 300W of Peak Power!
LUMIX C.P.S. emits the light beam within the nanosecond range.
The brevity and specificity of the light beam limits the heat emission to the surrounding tissues, concentrating efficacy only where needed. The nano-pulses allow to supply large amounts of energy without elevated thermal cutaneous effects. The minimum surface thermal effect allows not to need cryotherapy.
The use of high pulsation frequencies (over 30 KHz: Superpulsation) exploits a new physical phenomenon: the photomechanical effect, that is the transformation, at a molecular level, of the luminous EM energy into mechanical energy.
Indications for an effective, safe and customizable therapy:
BIOSTIMULATION
PAIN THERAPY – analgesic effect
POST-TRAUMATIC SPORTS MEDICINE
ANTI-INFLAMMATORY
LOCALIZED ANTI-EDEMA
REHABILITATION THERAPY
The brevity and specificity of the light beam limits the heat emission to the surrounding tissues, concentrating efficacy only where needed. The nano-pulses allow to supply large amounts of energy without elevated thermal cutaneous effects. The minimum surface thermal effect allows not to need cryotherapy.
The use of high pulsation frequencies (over 30 KHz: Superpulsation) exploits a new physical phenomenon: the photomechanical effect, that is the transformation, at a molecular level, of the luminous EM energy into mechanical energy.
Indications for an effective, safe and customizable therapy:
BIOSTIMULATION
PAIN THERAPY – analgesic effect
POST-TRAUMATIC SPORTS MEDICINE
ANTI-INFLAMMATORY
LOCALIZED ANTI-EDEMA
REHABILITATION THERAPY
About us
Company details
Fisioline® is an italian manufacturer of electromedical equipment which was established in 1985 and has been operating internationally for several years.
Fisioline® sectors of experience are: PHYSIOTHERAPY, REHABILITATION, SPORTS MEDICINE, DENTISTRY, SURGERY, AESTETHIC MEDICINE, DERMATOLOGY, BEAUTY, PODIATRY and VETERINARY.
Within Fisioline®, the Research and Development department holds a prominent position. A team of electronic engineers with solid experience in the electromedical field are always on the lookout for innovative solutions for developing cutting-edge equipment.
Fisioline® has an internal production department managed by electronic technicians, guaranteeing a technical support and a direct and full technical assistance. Fisioline® manufactures avanguard laser devices.
The cooperation of its engineers to projects with internationally well known universities has allowed Fisioline® to become the first Italian company that manufactured high power pulsed lasers back in 1993, opening up a new horizon for this kind of devices.
The quality of Fisioline® products is certified in accordance with the main international standards.
Striving for constant improvement has enabled Fisioline® to obtain certification for its Company Quality System in accordance with the UNI EN ISO 9001 and UNI CEI EN 13485standards.
These certifications allow Fisioline® to effectively and safely operate concerning the design, the production and the technical assistance of its products, under a quality system that regulates the development.
Fisioline® has always invested in scientific research reaching important goals as the FDA approval of its therapeutic laser devices. The FDA is the American governmental agency responsible for public health protection in USA.
All electromedical equipment manufactured by Fisioline® comes with CE Medical certification, as required by the Directive 93/42/EEC, modified by the Directive 2007/47/EC on medical devices.
Since 2004 Fisioline® laser devices have been obtained the FDA (Food and Drug Administration) approval.
Fisioline follows a quality politicy aimed at a constant improvement of its products/services.
Primary goals of the quality politicy:
Fisioline is a reliable partner! Why choose Fisioline?
Fisioline® sectors of experience are: PHYSIOTHERAPY, REHABILITATION, SPORTS MEDICINE, DENTISTRY, SURGERY, AESTETHIC MEDICINE, DERMATOLOGY, BEAUTY, PODIATRY and VETERINARY.
Within Fisioline®, the Research and Development department holds a prominent position. A team of electronic engineers with solid experience in the electromedical field are always on the lookout for innovative solutions for developing cutting-edge equipment.
Fisioline® has an internal production department managed by electronic technicians, guaranteeing a technical support and a direct and full technical assistance. Fisioline® manufactures avanguard laser devices.
The cooperation of its engineers to projects with internationally well known universities has allowed Fisioline® to become the first Italian company that manufactured high power pulsed lasers back in 1993, opening up a new horizon for this kind of devices.
The quality of Fisioline® products is certified in accordance with the main international standards.
Striving for constant improvement has enabled Fisioline® to obtain certification for its Company Quality System in accordance with the UNI EN ISO 9001 and UNI CEI EN 13485standards.
These certifications allow Fisioline® to effectively and safely operate concerning the design, the production and the technical assistance of its products, under a quality system that regulates the development.
Fisioline® has always invested in scientific research reaching important goals as the FDA approval of its therapeutic laser devices. The FDA is the American governmental agency responsible for public health protection in USA.
All electromedical equipment manufactured by Fisioline® comes with CE Medical certification, as required by the Directive 93/42/EEC, modified by the Directive 2007/47/EC on medical devices.
Since 2004 Fisioline® laser devices have been obtained the FDA (Food and Drug Administration) approval.
Fisioline follows a quality politicy aimed at a constant improvement of its products/services.
Primary goals of the quality politicy:
- Therapeutic result
- Customer’s satisfaction
- Constant improvement of the qualitative level
- Personnel’s involvement
Fisioline is a reliable partner! Why choose Fisioline?
- Made in Italy technologies
- Experience of more than 30 years in the Medical Field
- There are Fisioline Centers in over 30 Countries in the world
- 7 Divisions: MEDICAL, DENTAL, AESTHETIC MEDICINE, BEAUTY, SURGERY, PODIATRY, VETERINARY
- Complete range of devices
- Experimentations and scientific Support
- Rapid and long-lasting results
- Training with our Company Consultants
- Exclusive and solid working methodologies
- Prompt and qualified technical assistance
Company data
Foundation1985
Area of business- Imaging and diagnostics / medical equipment & devices
- Physiotherapy / Orthopaedic Technology