Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Deltalab S.L.
Plaza de la Verneda, 1 Pol. Ind. La Llana,
08191
Rubi (Barcelona)
Spain
Spain
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Contact
Our range of products
Product categories
- 05 Commodities and consumer goods
- 05.07 Disposables
- 05.07.02 Disposable articles for laboratories
Disposable articles for laboratories
- Sterile swabs in tube
- Deltaswab Virus
- Deltaswabs Amies
- Deltaswabs Cary Blair
- Deltaswabs Vicum(R)
- Sample & transport swabs for microbiology
- Petri dishes
- Sterile calibrated loops
- Slides & cover-slides
- Centrifugal tubes
- Surface kit
- Water sampling
- Cell and tissue culture flasks
- Multiwell plates for cell culture
- Cell Scrapers (normal and rotable)
- Cell strainers
- Vacuum filtration
- Sterile Serological Pipettes
- Human DNAsa, RNAsa and DNA free certified swabs, steriles
- Sterile swab in round tube
- 0.2 ml Real Time PCR tubes
- Graduated 0.5 ml PCR tube
- 0.2 ml PCR tubes in strips
- 96 well standard plate
- PCR sealing mat
- 96 deep well plate (96 round wells)
- Adhesive sealing film
- 1.5 ml microtubes
- 2 ml graduated microtube
- Screw cap microtubes, with cap. Sterile
- 0.1 – 10 ul tip
- 2 – 200 ul universal
- Security screw cap containers
- Biopsy and tissue cassettes for Thermo
- Paraffin
- Biopsy Bags
- Adhesion microscope slides
- Staining system
- Rectangular graduated until 3 litres container with handle
- Containers and tubes for vacuum system
- 60 ml polypropylene containers (38 x 65 mm)
- Frascos 150 ml containers (57 x 73 mm)
- Sterile cryovials
- Racks with lid
- Polycarbonate racks for cryovials
- Robotic Tips for Qiagen (300μl and 1,100μl)
- Robotic Tips for Hamilton (300μl and 1,000μl)
- Robotic and conductive tips for TECAN
- Glass Pasteur pipettes
- Single variable volume NICHIPET EXII
- Single channel and variable volume NICHIPET PREMIUM pipettes
- Casetes para biopsia y para tejidos para PRIMERA y SAKURA TISSUE-TEK SMARTWRITE.
Our products
Product category: Disposable articles for laboratories
Sterile swabs in tube
Sterile dry swab supplied in shockproof round bottom polypropylene tube, with a label sealing the cap.
Versions: Stick in PS/aluminium/wood and caps in cotton/viscose/polyester
Dimensions of tube: Ø 13 x 165 mm. Sterilised by ethylene oxide.
Versions: Stick in PS/aluminium/wood and caps in cotton/viscose/polyester
Dimensions of tube: Ø 13 x 165 mm. Sterilised by ethylene oxide.
Product category: Disposable articles for laboratories
Deltaswab Virus
Specially indicated for the collection and transport of microbiological samples containing Virus. By including antibiotics that inhibit the growth of bacteria and fungi, it ensures suitability in sample recovery.
It maintains the viability of viruses for up to 96 hours at both room temperature and refrigerated.
Following the WHO recommendations, this product is indicated for the collection and transport of
samples of viruses, like SARS-CoV-2.
Designed for cell culture and to be compatible with molecular diagnostic techniques by PCR.
Swab: CE MDD
Tube: CE IVD
It maintains the viability of viruses for up to 96 hours at both room temperature and refrigerated.
Following the WHO recommendations, this product is indicated for the collection and transport of
samples of viruses, like SARS-CoV-2.
Designed for cell culture and to be compatible with molecular diagnostic techniques by PCR.
Swab: CE MDD
Tube: CE IVD
Product category: Disposable articles for laboratories
Deltaswabs Amies
Particularly suited for microbiological sample collection and transport. It maintains the viability of Aerobes, Facultative Anaerobes and Anaerobes Bacteria for a minimum of 48 hours both at room temperature (20-25ºC) and at refrigeration temperature (2-8ºC) and 24 hours with Fastidious Bacteria, following CLSI, M40-A2* standard methodology. Designed both for traditional and automated sample streaking. Compatible with the molecular diagnostic techniques and for direct extension on glass slides.
Sterilised by radiation.
Peel-pack package.
*M40-A2:CLSI Quality Control of Microbiology Transport System: Approved Standard – Second Edition
Swab: CE MDD
Tube: CE IVD
Sterilised by radiation.
Peel-pack package.
*M40-A2:CLSI Quality Control of Microbiology Transport System: Approved Standard – Second Edition
Swab: CE MDD
Tube: CE IVD
Product category: Disposable articles for laboratories
Deltaswabs Cary Blair
Specially suited for the collection and transport of faecal samples. Maintains the viability of the fecal pathogens for a minimum of 48 hours without overgrowth, following CLSI, M40-A2* standard methodology. Designed for carrying out sample collection directly from the rectum or from faeces. Designed for traditional and automated sample streaking. Compatible with the molecular diagnostic techniques by PCR and for direct extension on glass slides. Peel-pack package. Sterilised by radiation.
*M40-A2:CLSI Quality Control of Microbiology Transport System: Approved Standard – Second Edition
Swab: CE MDD
Tube: CE IVD
*M40-A2:CLSI Quality Control of Microbiology Transport System: Approved Standard – Second Edition
Swab: CE MDD
Tube: CE IVD
Product category: Disposable articles for laboratories
Deltaswabs Vicum(R)
Particularly suited for collecting and transporting microbiological samples which contain
Virus, Chlamydia, Ureaplasma and/or Mycoplasma. Includes antibiotics which inhibit
the growth of Bacteria and Fungi; this ensures reliability in terms of sample recovery. Maintains the infectability of viruses for a minimum of 96 hours both at room temperature (20-25ºC) and at refrigeration temperature (2-8ºC), following CLSI, M40-A2* standard methodology. Each tube contains glass beads to facilitate cell lysis, sample homogeneousness and maximize the elution of the sample from the swab. Designed for cell cultivation and compatible with molecular diagnostic techniques by quantitative PCR. Peel-pack package.
Swab sterilised by radiation.
*M40-A2:CLSI Quality Control of Microbiology Transport System: Approved Standard – Second Edition
Swab: CE MDD
Tube: CE IVD
Virus, Chlamydia, Ureaplasma and/or Mycoplasma. Includes antibiotics which inhibit
the growth of Bacteria and Fungi; this ensures reliability in terms of sample recovery. Maintains the infectability of viruses for a minimum of 96 hours both at room temperature (20-25ºC) and at refrigeration temperature (2-8ºC), following CLSI, M40-A2* standard methodology. Each tube contains glass beads to facilitate cell lysis, sample homogeneousness and maximize the elution of the sample from the swab. Designed for cell cultivation and compatible with molecular diagnostic techniques by quantitative PCR. Peel-pack package.
Swab sterilised by radiation.
*M40-A2:CLSI Quality Control of Microbiology Transport System: Approved Standard – Second Edition
Swab: CE MDD
Tube: CE IVD
Product category: Disposable articles for laboratories
Sample & transport swabs for microbiology
This product is composed by a tube with transport medium and a swab to take the sample and put it on the tube to transport it to the laboratory.
Transport media range: Amies, amies charcoal, Stuart, Cary Blair, Virus and Chlamydia
Swab range: Stick made of PS or aluminium, cap made of viscose
Presented in a individual peel-pack sterilised by radiation.
Swab: CE MDD Class IIa
Tube: CE IVD
Transport media range: Amies, amies charcoal, Stuart, Cary Blair, Virus and Chlamydia
Swab range: Stick made of PS or aluminium, cap made of viscose
Presented in a individual peel-pack sterilised by radiation.
Swab: CE MDD Class IIa
Tube: CE IVD
Product category: Disposable articles for laboratories
Centrifugal tubes
Made of polypropylene, suitable for both clinical and research applications.
DNAsa, RNAsa and pyrogen free.
They are also free from natural rubber and heavy metals.
High transparency of the material for a clear visualization during experiments specially for molecular biology and animal tissue culture.
Tube and cap designed with the system of flat threads for a complete leakproof.
Highly smooth hydrophobic surface for minimum disturbance during centrifugation.
Silk-screen blue graduation in the tube and large white frosted portion for easy writing.
Autoclavable at 121 ºC.
Centrifugation resistance: 14.000 xg, except code 429931: 7.000 xg and codes 429950, 429951: 3.500 xg
It is recommended to use adapters to centrifuge and avoid malformations.
Available models: 15 ml non-skirted and 50 ml skirted and non-skirted.
DNAsa, RNAsa and pyrogen free.
They are also free from natural rubber and heavy metals.
High transparency of the material for a clear visualization during experiments specially for molecular biology and animal tissue culture.
Tube and cap designed with the system of flat threads for a complete leakproof.
Highly smooth hydrophobic surface for minimum disturbance during centrifugation.
Silk-screen blue graduation in the tube and large white frosted portion for easy writing.
Autoclavable at 121 ºC.
Centrifugation resistance: 14.000 xg, except code 429931: 7.000 xg and codes 429950, 429951: 3.500 xg
It is recommended to use adapters to centrifuge and avoid malformations.
Available models: 15 ml non-skirted and 50 ml skirted and non-skirted.
Product category: Disposable articles for laboratories
Surface kit
The new surface kits are supplied with a swab and a tube containing a buffered broth with neutralising agents. Kits are intended for surface sampling for subsequent microbiological analysis. The kit is a single use product and is sterilised by radiation. The swab is composed of a polystyrene support with a breakpoint (only reference 200398) and a viscose tip. The tube incorporates a pressure or screwed cap. The kit is intended to be used by skilled personnel, properly trained un surface sampling. The kit is presented individually wrapped in a peel-pack format. The kit is complemented with the sampling template (200396P).
It has a hole of 4×5 cm to perform the sampling, is sterile and its supplied in a flow-pack.
It has a hole of 4×5 cm to perform the sampling, is sterile and its supplied in a flow-pack.
Product category: Disposable articles for laboratories
Water sampling
PE and PET bottles for water sampling.
- Bottles with liquid sodium thiosulfate (24 mg/l): Ideal to analyse water meant for human consumption, swimming pools, and any other water where Chlorine may modify the composition of the sample while being transported.
- Sterile bottles: Ideal to sample unchlorinated water for microbiological analysis, as well as for other sampling requiring sterile bottles.
Product category: Disposable articles for laboratories
Cell and tissue culture flasks
Cell and Tissue Culture Flasks are perfect for cell growth and cell yields aim on little and medium input volume. Available in surface-treated and non-treated. Flacks surface is flat and free from striation to maximize usable growth area. Innovative angled neck design offers good pipet and cell scraper access in. Both flask sides have engraved graduation. Strict integrity tested.
Sterilized by radiation. Non-pyrogenic. DNase/RNase-free.
Sterilized by radiation. Non-pyrogenic. DNase/RNase-free.
Product category: Disposable articles for laboratories
Multiwell plates for cell culture
Cell and Tissue Culture Plates are ideal for cell growth and cell yields on multiple, compare and other analyse.
Single position lid reduces the risks of cross-contamination and the handling mistakes. Wells are labelled with alphanumeric code for easy identification. Suitable for all common instruments and automation. Lid included. Individually packaged.
Sterilized by radiation. Non-pyrogenic. DNase/RNase-free.
Single position lid reduces the risks of cross-contamination and the handling mistakes. Wells are labelled with alphanumeric code for easy identification. Suitable for all common instruments and automation. Lid included. Individually packaged.
Sterilized by radiation. Non-pyrogenic. DNase/RNase-free.
Product category: Disposable articles for laboratories
Cell Scrapers (normal and rotable)
Normal version and rotating version. Material:blades/TPE, handle/ABS. Special developed to make the process of scraping off and collecting cells easier and effective.
Free rotating blade to twist to the desired direction. Total access to all corner. Small raised knobs on the handle.
Individually packaged.
Sterilized by radiation. Non-pyrogenic. DNase/RNase-free.
Free rotating blade to twist to the desired direction. Total access to all corner. Small raised knobs on the handle.
Individually packaged.
Sterilized by radiation. Non-pyrogenic. DNase/RNase-free.
Product category: Disposable articles for laboratories
Cell strainers
The cell filters are manufactured with a resistant nylon mesh with evenly spaced and gamma ray resistant mesh pores.
These cell filters are sterile, fast and easy-to-use devices for isolating primary cells to consistently obtain a uniform suspension of individual cells from tissues.
They allow to ensure the correct functioning of the flow cytometry and cell separation instruments by effectively eliminating traces and debris from cell suspensions and clinical samples before analysis.
Individually packaged
Sterilized by radiation. Not pyrogenic DNase and RNase free.
These cell filters are sterile, fast and easy-to-use devices for isolating primary cells to consistently obtain a uniform suspension of individual cells from tissues.
They allow to ensure the correct functioning of the flow cytometry and cell separation instruments by effectively eliminating traces and debris from cell suspensions and clinical samples before analysis.
Individually packaged
Sterilized by radiation. Not pyrogenic DNase and RNase free.
Product category: Disposable articles for laboratories
Vacuum filtration
Vacuum filters are very useful in separating and purifying large volume samples. Available with 4 types of PVDF and PES membrane.
There are 2 membrane pore sizes of 0.22 and 0.45. 4 volumes available: 125, 250, 500 and 1000 ml.
Unitary container Sterilized by radiation.
Not pyrogenic DNase and RNase free.
There are 2 membrane pore sizes of 0.22 and 0.45. 4 volumes available: 125, 250, 500 and 1000 ml.
Unitary container Sterilized by radiation.
Not pyrogenic DNase and RNase free.
Product category: Disposable articles for laboratories
Sterile Serological Pipettes
Made of glass polystyrene. Single use only.
Serological pipettes have an accuracy of +/- 2% at full scale.
Sterilized by radiation.
Manufactured in one, two or three pieces depending on the volume.
They guarantee maximum precision without liquid retention at the welding level and offer a total dispensing. Pyrogenic, non-cytotoxic and non-hemolytic.
Volumes from 1 ml to 50 ml, identified with a polyolefin (does not contain synthetic fibers) white cotton and screen printed in color according to volume.
The peel-pack of the models presented in this way is fiber-free and easy to open. Black graduations, bright and unalterable. Negative scale and double
inverted scale (ascending and descending graduations).
DNAse and RNAse free.
Manufactured in a room with controlled environment, class 100,000.
BSE / TSE free.
This product does not contain latex.
Serological pipettes have an accuracy of +/- 2% at full scale.
Sterilized by radiation.
Manufactured in one, two or three pieces depending on the volume.
They guarantee maximum precision without liquid retention at the welding level and offer a total dispensing. Pyrogenic, non-cytotoxic and non-hemolytic.
Volumes from 1 ml to 50 ml, identified with a polyolefin (does not contain synthetic fibers) white cotton and screen printed in color according to volume.
The peel-pack of the models presented in this way is fiber-free and easy to open. Black graduations, bright and unalterable. Negative scale and double
inverted scale (ascending and descending graduations).
DNAse and RNAse free.
Manufactured in a room with controlled environment, class 100,000.
BSE / TSE free.
This product does not contain latex.
Product category: Disposable articles for laboratories
Human DNAsa, RNAsa and DNA free certified swabs, steriles
Human DNA free Certified. Sterilised by ethylene oxyde. The swab is supplied in a polypropylene tube, which protects the sample up to the laboratory prior to its analysis. The stick of the swab is made of polystyrene while the head is produced with viscose or polyester according to the code. The tube is labeled indicating code, description, lot, expiry date and providing an identifying area to note down collection details (site, date, etc.). Moreover, the label seals the tube with the cap of the swab, acting like a tamper evident system.
Expiry date: 48 month from sterilization date.
Expiry date: 48 month from sterilization date.
Product category: Disposable articles for laboratories
Sterile swab in round tube
Sterile dry swabs supplied in shockproof round bottom polypropylene tube,
with a label sealing the cap.
Dimensions of tube: Ø 13 x 165 mm.
Sterilised by ethylene oxide.
Expiry date: 48 month from sterilization date.
Code 300265: CE MDD Class I Sterile
with a label sealing the cap.
Dimensions of tube: Ø 13 x 165 mm.
Sterilised by ethylene oxide.
Expiry date: 48 month from sterilization date.
Code 300265: CE MDD Class I Sterile
Product category: Disposable articles for laboratories
0.2 ml Real Time PCR tubes
Tubes made of polypropylene, featuring attached hinged caps.
Flat caps are easily pierceable and offer optical quality, thus allowing their application in Real Time PCR.
Available in strips of 8 tubes.
Certified RNAse, DNAse and PCR inhibitors free.
Flat caps are easily pierceable and offer optical quality, thus allowing their application in Real Time PCR.
Available in strips of 8 tubes.
Certified RNAse, DNAse and PCR inhibitors free.
Product category: Disposable articles for laboratories
Graduated 0.5 ml PCR tube
Made of polypropylene. Certified RNAse, DNAse and pyrogen free.
Attached hinged caps are dommed and easily pierceable. Tubes are easily opened and closed with one hand.
Tubes have moulded-in graduations in 0.1 ml increments from 0.1 up to 0.6 ml, and a frosted panel on their side for writing or labelling.
Attached hinged caps are dommed and easily pierceable. Tubes are easily opened and closed with one hand.
Tubes have moulded-in graduations in 0.1 ml increments from 0.1 up to 0.6 ml, and a frosted panel on their side for writing or labelling.
Product category: Disposable articles for laboratories
0.2 ml PCR tubes in strips
Made of natural colour polypropylene.
Certified RNAse, DNAse and pyrogen free.
Different models available:
– Strip of 8 or 12 tubes with its corresponding strip of 8 or 12 domed caps.
– Strip of 8 tubes with its attached hinged strip of domed caps.
– Strip of 8 tubes with its attached hinged strip of flat caps, suitable for Real Time PCR.
– Strip of 8 tubes.
– Strip of 8 flat caps, suitable for Real Time PCR.
Cap and tube strips allow easy handling and inventory of tubes and caps. Cap strips
prevent cross-contamination from tube to tube.
Code 4095.7N is also suitable for plates.
Certified RNAse, DNAse and pyrogen free.
Different models available:
– Strip of 8 or 12 tubes with its corresponding strip of 8 or 12 domed caps.
– Strip of 8 tubes with its attached hinged strip of domed caps.
– Strip of 8 tubes with its attached hinged strip of flat caps, suitable for Real Time PCR.
– Strip of 8 tubes.
– Strip of 8 flat caps, suitable for Real Time PCR.
Cap and tube strips allow easy handling and inventory of tubes and caps. Cap strips
prevent cross-contamination from tube to tube.
Code 4095.7N is also suitable for plates.
Product category: Disposable articles for laboratories
96 well standard plate
Made of transparent polypropylene.
96 wells standard plate with a capacity of 350 μl each well.
A low rim around the top of each well helps to prevent accidental cross-contamination and makes easy the sealing with film.
All wells are thin walled for an excellent thermal transfer.
A black printed alphanumeric grid helps sample identification.
Orientation cut is at position A 12 (upper right).
RNAse, DNAse, DNA and PCR inhibitors free.
Suitable for PCR and real time PCR (QPCR).
Dimensions according to the SBS standard.
96 wells standard plate with a capacity of 350 μl each well.
A low rim around the top of each well helps to prevent accidental cross-contamination and makes easy the sealing with film.
All wells are thin walled for an excellent thermal transfer.
A black printed alphanumeric grid helps sample identification.
Orientation cut is at position A 12 (upper right).
RNAse, DNAse, DNA and PCR inhibitors free.
Suitable for PCR and real time PCR (QPCR).
Dimensions according to the SBS standard.
Product category: Disposable articles for laboratories
PCR sealing mat
Manufactured from a non reactive rubber, this PCR sealing mat ensures a secure, leak free seal during the PCR cycling process. It is designed to seal 96 well PCR plates, but may also be cut to fit 24/32/48 well plates. The mat is marked “this side up” for a proper positioning into the plate (sharp cone side up). This sealing mat may be sterilised in an autoclave or cleaned by immersion in a bleach solution.
DNAse, RNAse, DNA and PCR inhibitors free.
DNAse, RNAse, DNA and PCR inhibitors free.
Product category: Disposable articles for laboratories
96 deep well plate (96 round wells)
Made of medical grade polypropylene, it is comprised of 96 round bottom wells, each one of 1.2 ml capacity. Printed alphanumeric grid helps sample identification, and to facilitate orientation the bottom right corner of the plate is cut away.
Widely used for liquid handling and storage, whether with manual pipetting or robotic handling.
It withstands temperatures from –90 ºC to 121 ºC (autoclave).
Dimensions according to SBS.
Certified free from detectable RNase, DNase, DNA and PCR inhibitors.
It can be sealed with the plastic sealing film 900300 or the pierceable aluminum foil 900320.
Widely used for liquid handling and storage, whether with manual pipetting or robotic handling.
It withstands temperatures from –90 ºC to 121 ºC (autoclave).
Dimensions according to SBS.
Certified free from detectable RNase, DNase, DNA and PCR inhibitors.
It can be sealed with the plastic sealing film 900300 or the pierceable aluminum foil 900320.
Product category: Disposable articles for laboratories
Adhesive sealing film
Sealing film for use with microplates, multiwell plates and microtiter plates.
Advantages:
1. Minimises the risk of contamination or reagent spillage during ELISA or PCR processes.
2. Minimises the risk of contamination from tube to tube and from plate to plate.
3. Prevents sample evaporation.
A 5 mm wide strip (opaque white) at the lateral edges of the film helps pull the film from its protective paper and prevents it sticking onto fingers. The film is thermostable and
functional from –70 ºC to 95 ºC at 75% humidity.
RNAse and DNAse free. DMSO resistant.
We recomend to use the “roller” 900330 to ensure a perfect seal.
Advantages:
1. Minimises the risk of contamination or reagent spillage during ELISA or PCR processes.
2. Minimises the risk of contamination from tube to tube and from plate to plate.
3. Prevents sample evaporation.
A 5 mm wide strip (opaque white) at the lateral edges of the film helps pull the film from its protective paper and prevents it sticking onto fingers. The film is thermostable and
functional from –70 ºC to 95 ºC at 75% humidity.
RNAse and DNAse free. DMSO resistant.
We recomend to use the “roller” 900330 to ensure a perfect seal.
Product category: Disposable articles for laboratories
2 ml graduated microtube
Microtubes made of ultra clear polypropylene. Autoclavable.
2 ml graduated tubes with frosted area for writing.
Flat cap that features a secure lock with safety shield.
Easy handling with just one hand.
They can be used at temperatures from –20 ºC up to 121 ºC.
Withstand centrifugation up to 12,000 xg.
2 ml graduated tubes with frosted area for writing.
Flat cap that features a secure lock with safety shield.
Easy handling with just one hand.
They can be used at temperatures from –20 ºC up to 121 ºC.
Withstand centrifugation up to 12,000 xg.
Product category: Disposable articles for laboratories
Screw cap microtubes, with cap. Sterile
Tubes and caps in medical grade, transparent polypropylene.
The cap embodies a non-reactive ethylene-propylene o-ring.
Suitable for autoclave, liquid nitrogen (gaz) and boiling processes.
Perfect for long term storage.
Withstand temperatures from –196 ºC.
Centrifugation Resistance: 20,000 xg.
DNAse, RNAse, DNA, and PCR inhibitors free.
Graduated models feature a frosted area for writing.
The non-graduated model incorporates an external grip for an easy handling. Microtubes are supplied capped, in bags of 50 units.
The cap embodies a non-reactive ethylene-propylene o-ring.
Suitable for autoclave, liquid nitrogen (gaz) and boiling processes.
Perfect for long term storage.
Withstand temperatures from –196 ºC.
Centrifugation Resistance: 20,000 xg.
DNAse, RNAse, DNA, and PCR inhibitors free.
Graduated models feature a frosted area for writing.
The non-graduated model incorporates an external grip for an easy handling. Microtubes are supplied capped, in bags of 50 units.
Product category: Disposable articles for laboratories
0.1 – 10 ul tip
Natural colour universal crystal tip, graduated. Gilson® type.
Rack made of autoclavable polypropylene up to 121 ºC.
Suitable (not exclusive): Gilson®, Eppendorf®, Biohit®, Dsg®, Elkay®, Finnpipette®, Genex®, Jencons®, Nichiryo®, HTL®. Code 326-19 minimum unit sale= 1 bag
Rack made of autoclavable polypropylene up to 121 ºC.
Suitable (not exclusive): Gilson®, Eppendorf®, Biohit®, Dsg®, Elkay®, Finnpipette®, Genex®, Jencons®, Nichiryo®, HTL®. Code 326-19 minimum unit sale= 1 bag
Product category: Disposable articles for laboratories
2 – 200 ul universal
Universal tip, bevelled. Gilson® type. Tips with filter: natural colour. Tips without filter: yellow colour.
Suitable (not exclusive): Gilson®, Eppendorf®, Dsg®, Elkay®, Finnpipette® (except Multichannel), Genex®, Jencons®, Nichiryo®, HTL®, Socorex® serie Akura .
Rack made of autoclavable (up to 121 ºC) polypropylene.
Suitable (not exclusive): Gilson®, Eppendorf®, Dsg®, Elkay®, Finnpipette® (except Multichannel), Genex®, Jencons®, Nichiryo®, HTL®, Socorex® serie Akura .
Rack made of autoclavable (up to 121 ºC) polypropylene.
Product category: Disposable articles for laboratories
Security screw cap containers
Ultra clear polypropylene containers with yellow polyethylene cap.
They have moulded graduations in ml.
Supplied uncapped with the caps and containers in the same box.
Ideal for the pneumatic transport of liquid samples, including those that have phormaline, because they have a watertight closure. The cap, with an innovative inner shape, has a double closure. (see the figure). The base and the cap are ribbed so the handling with gloves is comfortable and reliable.
There is a ring in the upper part of the body, in order to avoid the dripping in case of liquid decanting.
For other cap colours (blue, orange, magenta), ask for the minimum order quantities.
They have moulded graduations in ml.
Supplied uncapped with the caps and containers in the same box.
Ideal for the pneumatic transport of liquid samples, including those that have phormaline, because they have a watertight closure. The cap, with an innovative inner shape, has a double closure. (see the figure). The base and the cap are ribbed so the handling with gloves is comfortable and reliable.
There is a ring in the upper part of the body, in order to avoid the dripping in case of liquid decanting.
For other cap colours (blue, orange, magenta), ask for the minimum order quantities.
Product category: Disposable articles for laboratories
Biopsy and tissue cassettes for Thermo
Recommended for THERMO printers. Manufactured in POM, resistant to the chemical action of the solvents used in histology. Available for biopsy, with 0.9mm square holes, and for fabrics, with 0.5x1mm rectangular holes.
With 2 large marking areas on the sides and another on the front, 45º.
The hinge design ensures that the cassette and its lid are always attached even if it is opened and closed frequently, avoiding any loss of the sample.
Supplied in 10 sleeves of 75 cassettes plus 1 zip bag with 750 caps.
For other colors, check with the commercial department.
With 2 large marking areas on the sides and another on the front, 45º.
The hinge design ensures that the cassette and its lid are always attached even if it is opened and closed frequently, avoiding any loss of the sample.
Supplied in 10 sleeves of 75 cassettes plus 1 zip bag with 750 caps.
For other colors, check with the commercial department.
Product category: Disposable articles for laboratories
Biopsy Bags
Used to hold small biopsy and histological specimens during processing.
Manufactured from solvent resistant Polyester, effectively prevent the deformation. Thin mesh (0.2×0.2 mm) provides excellent fluid exchange and
avoids small sample loss. Convenient peel-open bag allows for placing and removing specimen rapidly.
Manufactured from solvent resistant Polyester, effectively prevent the deformation. Thin mesh (0.2×0.2 mm) provides excellent fluid exchange and
avoids small sample loss. Convenient peel-open bag allows for placing and removing specimen rapidly.
Product category: Disposable articles for laboratories
Adhesion microscope slides
Measures: 25 x 75mm
Thickness: 1.1mm
Made of super white glass with positive charge coating specially developed for use in immunohistochemistry (IHC) and other more complex
applications. It offers a great adhesion of the tissue on the surface of the slide. In addition, it also improves staining itself. Hydrophilic surface
tension. Suitable for use in manual IHC staining, automatic IHC staining with Leica and Dako automated IHC Stainers and routine H&E staining of detachable tissue sections.
Models D100020 and D100021 are also recommended for Roche Ventana automated IHC Stainer.
Expiry date: 15 months
Thickness: 1.1mm
Made of super white glass with positive charge coating specially developed for use in immunohistochemistry (IHC) and other more complex
applications. It offers a great adhesion of the tissue on the surface of the slide. In addition, it also improves staining itself. Hydrophilic surface
tension. Suitable for use in manual IHC staining, automatic IHC staining with Leica and Dako automated IHC Stainers and routine H&E staining of detachable tissue sections.
Models D100020 and D100021 are also recommended for Roche Ventana automated IHC Stainer.
Expiry date: 15 months
Product category: Disposable articles for laboratories
Staining system
Slide staining system compound of a range of jars, and a 12 slides staining rack. Different jar colours allow the user to distinguish each stage of the staining process. Jar and rack made of autoclavable POM (polyoxymethylene), resistant to staining agents as alcohol, xylene, etc. (not phenol).
The jar embodies a hinged lid which allows storing the jar with the content.
Reagent capacity: 80 ml.
Jars can be loosely joined to each other laterally.
The rack features a handle in the hinged lid, and can be placed up when handled out of the jar. Since the slides are placed vertically in the rack, their writing area will not be stained, allowing their removal without the use of forceps.
Rack and jar withstand from –170 ºC and 121 ºC.
Jar dimensions: 64 x 76 x 92 mm. Rack dimensions: 60 x 64 x 97 mm.
The jar embodies a hinged lid which allows storing the jar with the content.
Reagent capacity: 80 ml.
Jars can be loosely joined to each other laterally.
The rack features a handle in the hinged lid, and can be placed up when handled out of the jar. Since the slides are placed vertically in the rack, their writing area will not be stained, allowing their removal without the use of forceps.
Rack and jar withstand from –170 ºC and 121 ºC.
Jar dimensions: 64 x 76 x 92 mm. Rack dimensions: 60 x 64 x 97 mm.
Product category: Disposable articles for laboratories
Rectangular graduated until 3 litres container with handle
Product designed for collection of 24 hours urine samples.
Container made of polyethylene and cap of polypropylene.
Brown opaque body and cap depending on the model:
– 408600 Yellow cap with vacuum system
– 408601 Yellow cap with vacuum system with long canula
– 408610 Standard white cap
The three of them are completely leakproof thanks to its sealing ring and ensure
a total sealing of the sample.
The vacuum system ensures a clean transfer of the urine from the container to
the vacuum tube and prevents the risk of cross contamination in the handling of
the sample. It also avoids sample loss by splashing or outpouring.
The container has a handle with ergonomic empty space to facilitate a much more comfortable dump and the manual transport of the sample.
It incorporates a translucent vertical stripe on one side where the graduation allows the control of the level of sample containing. Graduated each 100 ml, to 3,000 ml.
Total capacity: 3.3 l.
Unit weight (without cap): 115 g (± 3 g).
Cap weight (vacuum system): 8.2 g (± 0.2 g).
Cap weight (standard system): 5.5 g (± 0.2 g).
Container made of polyethylene and cap of polypropylene.
Brown opaque body and cap depending on the model:
– 408600 Yellow cap with vacuum system
– 408601 Yellow cap with vacuum system with long canula
– 408610 Standard white cap
The three of them are completely leakproof thanks to its sealing ring and ensure
a total sealing of the sample.
The vacuum system ensures a clean transfer of the urine from the container to
the vacuum tube and prevents the risk of cross contamination in the handling of
the sample. It also avoids sample loss by splashing or outpouring.
The container has a handle with ergonomic empty space to facilitate a much more comfortable dump and the manual transport of the sample.
It incorporates a translucent vertical stripe on one side where the graduation allows the control of the level of sample containing. Graduated each 100 ml, to 3,000 ml.
Total capacity: 3.3 l.
Unit weight (without cap): 115 g (± 3 g).
Cap weight (vacuum system): 8.2 g (± 0.2 g).
Cap weight (standard system): 5.5 g (± 0.2 g).
Product category: Disposable articles for laboratories
Containers and tubes for vacuum system
120 ml containers designed to use with vacuum tubes. It allows a clean transfer of the urine from the container to the vacuum tube. Manufactured in transparent Polypropylene. Leakproof cap made of yellow polyethylene, with an internal obturating ring. It includes a cannula with a needle inside protected by a rubber cap and a plastic suction nozzle. The cap features a label that seals the cannula in order to prevent contact with the collection needle. The container features a wide marking area for sample identification and a graduation that helps to quantify the sample when uncapped. Once capped, the graduation is inaccurate as the volume is altered by the cannula. Maximum volume with cap: 120 ml, recommended volume: 60 ml.
Tubes in PET produced with the inner cap in caoutchouc and outer cap in yellow polyethylene. Incorporate label for sample identification, with white background and a transverse line in yellow to easily see that it is a tube for urine. Printed with the lot, expiration date, CE mark, volume of suction, manufacturer, and only one use symbol.
Label dimensions: 40 x 20 mm. Supplied in foam racks of 100 units, shrink-wrapped and labeled.
Tubes in PET produced with the inner cap in caoutchouc and outer cap in yellow polyethylene. Incorporate label for sample identification, with white background and a transverse line in yellow to easily see that it is a tube for urine. Printed with the lot, expiration date, CE mark, volume of suction, manufacturer, and only one use symbol.
Label dimensions: 40 x 20 mm. Supplied in foam racks of 100 units, shrink-wrapped and labeled.
Product category: Disposable articles for laboratories
Sterile cryovials
Tubes made of autoclavable polypropylene.
Designed for the storage of biological material at temperatures as low as –196 ºC. (Liquid Nitrogen but in gas state).
Cryovials have printed graduations and feature a white marking area for sample identification. Caps and tubes have both the same coefficient of expansion, which further
enhances their leakproof qualities at changing temperatures.
Caps are manufactured in polyethylene* and embody a silicone O-ring that guarantees leakproof.
Colour code inserts can be fitted into the caps for identification.
All cryovials are certified RNAse, DNAse and pyrogen free.
Cryovials are sterilized by radiation and are packaged in safety-lock bags of 100.
Supplied capped.
External threads:
minimize liquid retention. Non skirted versions withstand centrifugation up to 17,000 xg.
* 10 ml cryovial (code 401410) features a polyethylene cap which does not accept inserts.
Internal threads:
Non skirted versions withstand centrifugation up to 14,000 xg.
Designed for the storage of biological material at temperatures as low as –196 ºC. (Liquid Nitrogen but in gas state).
Cryovials have printed graduations and feature a white marking area for sample identification. Caps and tubes have both the same coefficient of expansion, which further
enhances their leakproof qualities at changing temperatures.
Caps are manufactured in polyethylene* and embody a silicone O-ring that guarantees leakproof.
Colour code inserts can be fitted into the caps for identification.
All cryovials are certified RNAse, DNAse and pyrogen free.
Cryovials are sterilized by radiation and are packaged in safety-lock bags of 100.
Supplied capped.
External threads:
minimize liquid retention. Non skirted versions withstand centrifugation up to 17,000 xg.
* 10 ml cryovial (code 401410) features a polyethylene cap which does not accept inserts.
Internal threads:
Non skirted versions withstand centrifugation up to 14,000 xg.
Product category: Disposable articles for laboratories
Racks with lid
Polypropylene rack, autoclavable and designed for storage of samples down to –90 ºC.
The lid is jointed to the rack by hinges. Available in fluorescent colours.
The racks are alphanumerically matrixed and are designed for 1.5 and 2 ml microtubes or 2.0 ml cryotubes; and we can supply two different models which can accommodate 50 and 100 tubes respectively.
Dimensions: 71 x 153 x 53 mm (50 wells).
140 x 153 x 53 mm (100 wells).
The lid is jointed to the rack by hinges. Available in fluorescent colours.
The racks are alphanumerically matrixed and are designed for 1.5 and 2 ml microtubes or 2.0 ml cryotubes; and we can supply two different models which can accommodate 50 and 100 tubes respectively.
Dimensions: 71 x 153 x 53 mm (50 wells).
140 x 153 x 53 mm (100 wells).
Product category: Disposable articles for laboratories
Polycarbonate racks for cryovials
These racks provide ultra low temperature storage (from –196 ºC to 121 ºC), holding 2 or 5 ml cryovals (depending on the model).
Compatible with other storage systems, they can be sterilised using autoclave protocols.
They can also be immersed in liquid nitrogen, where its design means minimal issues with excess liquid on their removal.
Compatible with other storage systems, they can be sterilised using autoclave protocols.
They can also be immersed in liquid nitrogen, where its design means minimal issues with excess liquid on their removal.
Product category: Disposable articles for laboratories
Robotic Tips for Qiagen (300μl and 1,100μl)
Manufactured in clean room class ISO 8.
Racks and tips in conductive polypropylene.
Free of DNase, RNase and endotoxins.
High precision tips. The conductivity allows the system to recognize the filling
height and guarantees a minimum immersion of the tip in the liquid, to ensure
safe pipetting and dispensing.
The rack has 96 tips.
They are supplied in double package.
Compatible with BEP 2000®, Biorobot®, Elysis Quattro®, Etimax®,
Evolis®, Triturus® and others.
Racks and tips in conductive polypropylene.
Free of DNase, RNase and endotoxins.
High precision tips. The conductivity allows the system to recognize the filling
height and guarantees a minimum immersion of the tip in the liquid, to ensure
safe pipetting and dispensing.
The rack has 96 tips.
They are supplied in double package.
Compatible with BEP 2000®, Biorobot®, Elysis Quattro®, Etimax®,
Evolis®, Triturus® and others.
Product category: Disposable articles for laboratories
Robotic Tips for Hamilton (300μl and 1,000μl)
Manufactured in clean room class ISO 8.
Racks and tips in conductive polypropylene.
Free of DNase, RNase and endotoxins.
High precision tips. The conductivity allows the system to recognize the filling height and guarantees a minimum immersion of the tip in the liquid, to ensure
safe pipetting and dispensing.
The rack has 96 tips.
They are supplied in blister of 5.
Compatible with Hamilton Microblab Star®, Nimbus® and Vantage®.
Racks and tips in conductive polypropylene.
Free of DNase, RNase and endotoxins.
High precision tips. The conductivity allows the system to recognize the filling height and guarantees a minimum immersion of the tip in the liquid, to ensure
safe pipetting and dispensing.
The rack has 96 tips.
They are supplied in blister of 5.
Compatible with Hamilton Microblab Star®, Nimbus® and Vantage®.
Product category: Disposable articles for laboratories
Robotic and conductive tips for TECAN
Manufactured in clean room class ISO 8.
Racks and tips in conductive polypropylene.
Free of DNase, RNase and endotoxins.
High precision tips.
The conductivity allows the system to recognize the filling height and guarantees a minimum immersion of the tip in the liquid, to ensure safe
pipetting and dispensing.
The rack has 96 tips.
They are supplied in double package.
Compatible with Tecan Genesis® and Tecan Evo Freedom®..
Racks and tips in conductive polypropylene.
Free of DNase, RNase and endotoxins.
High precision tips.
The conductivity allows the system to recognize the filling height and guarantees a minimum immersion of the tip in the liquid, to ensure safe
pipetting and dispensing.
The rack has 96 tips.
They are supplied in double package.
Compatible with Tecan Genesis® and Tecan Evo Freedom®..
Product category: Disposable articles for laboratories
Glass Pasteur pipettes
Open: Soda glass. Dimensions: Ø mouth: 6.95 ± 0.15 mm; Ø tip: 1.2 ± 0.15 mm; 0.53 ± 0.03 thick. Closed: Made of neutral soda glass, with the tip closed and cotton in the mouth. Easy opening of the closed part by pushing it slightly. Dimensions: mouth: 7.00 mm; tip: 1.4 to 1.6 mm; thickness: 0.50 mm.
Product category: Disposable articles for laboratories
Single variable volume NICHIPET EXII
1) Fully autoclavable and UV rays resistant pipettes. Easy digital volume setting.
Ceramic piston for volumes bigger than 200 μL. Easy lock with one hand and thermal insulation of the handle. Easy calibration.PTFE Chamber that maintains its tightness and reproducibility for a long time.
2) Model EXII Plus is specifically designed for using with chemical solvents without any danger of corrosion. A Perfluoro rubber O-ring is installed in Nichipet EXII Plus. The Nichipet EX Plus II model is yellow and the Nichipet EX II model is blue.
Ceramic piston for volumes bigger than 200 μL. Easy lock with one hand and thermal insulation of the handle. Easy calibration.PTFE Chamber that maintains its tightness and reproducibility for a long time.
2) Model EXII Plus is specifically designed for using with chemical solvents without any danger of corrosion. A Perfluoro rubber O-ring is installed in Nichipet EXII Plus. The Nichipet EX Plus II model is yellow and the Nichipet EX II model is blue.
Product category: Disposable articles for laboratories
Single channel and variable volume NICHIPET PREMIUM pipettes
Single channel and variable volume NICHIPET PREMIUM pipettes. These pipettes have the same features as NICHIPET EXII, and the following advantages:
Nozzle with a high level of tolerance to abrasion, ceramic piston made of noncorrosive materials, and body made as solvent resistant. 4 position to lock the
volume. HyperBlow system to improve dispensation efficiency. Body designed to minimize fatigue and corrosion resistance ejector.
5-year warranty. The Nichipet Premium model is gray and the Nichipet Premium LT model is pink.
Nozzle with a high level of tolerance to abrasion, ceramic piston made of noncorrosive materials, and body made as solvent resistant. 4 position to lock the
volume. HyperBlow system to improve dispensation efficiency. Body designed to minimize fatigue and corrosion resistance ejector.
5-year warranty. The Nichipet Premium model is gray and the Nichipet Premium LT model is pink.
Product category: Disposable articles for laboratories
Casetes para biopsia y para tejidos para PRIMERA y SAKURA TISSUE-TEK SMARTWRITE.
Recomendados para impresoras PRIMERA y SAKURA TISSUE-TEK SMARTWRITE.
Fabricados en POM, resistentes a la acción química de los solventes utilizados en histología. Disponible para biopsia, con agujeros cuadrados de 1,6mm, y para tejidos, con orificios rectangulares de 0,5x1mm. Con 2 grandes áreas de marcado en los laterales y otra en la parte frontal, de 35º.
Diseñados de una pieza y cierre a presión.
Suministrados en 25 mangas de 40 casettes, con tapa abierta.
Para otros colores, consultar con el departamento comercial.
Fabricados en POM, resistentes a la acción química de los solventes utilizados en histología. Disponible para biopsia, con agujeros cuadrados de 1,6mm, y para tejidos, con orificios rectangulares de 0,5x1mm. Con 2 grandes áreas de marcado en los laterales y otra en la parte frontal, de 35º.
Diseñados de una pieza y cierre a presión.
Suministrados en 25 mangas de 40 casettes, con tapa abierta.
Para otros colores, consultar con el departamento comercial.
Company news
Date
Topic
Download
Oct 21, 2020
COVID-19 SOLUTIONS catalogue with our entire range of products to fight coronavirus.
About us
Company details
Company name: DELTALAB S.L
Company adress: Plaza de la Verneda, 1 Pol.Ind. La Llana
City, Zip Code: 08191 Rubí (Barcelona).
Country: Spain
Website: www.deltalab.es
COMPANY PROFILE:
DELTALAB is a leading company in design and manufacturing of single use labware at the highest Quality standards, Sustainability criteria, Bussiness Ethics and Corporate Social Responsibility. DELTALAB brings his great ability to provide solutions to any specific need, be it processing, application or use. Our presence in more than 125 countries all over the world and our network of more than 900 distributors is the result of more than 40 years of international marketing. Clinics, hospitals, industries, universities and referral laboratories in the 5 continents trust DELTALAB as a guarantee of Quality and Service.
Company adress: Plaza de la Verneda, 1 Pol.Ind. La Llana
City, Zip Code: 08191 Rubí (Barcelona).
Country: Spain
Website: www.deltalab.es
COMPANY PROFILE:
DELTALAB is a leading company in design and manufacturing of single use labware at the highest Quality standards, Sustainability criteria, Bussiness Ethics and Corporate Social Responsibility. DELTALAB brings his great ability to provide solutions to any specific need, be it processing, application or use. Our presence in more than 125 countries all over the world and our network of more than 900 distributors is the result of more than 40 years of international marketing. Clinics, hospitals, industries, universities and referral laboratories in the 5 continents trust DELTALAB as a guarantee of Quality and Service.
Company data
Number of employees100-499
Foundation1976
Area of business- Laboratory equipment
- Disposables and consumables