Please log in
You must be logged in to send the contact request.
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
You must be logged in to send the contact request.
Please check your internet connection or try again later.
Your message to the exhibitor was sent successfully.
Sterilisation equipment, disinfection equipment and accessories, autoclaves
Laboratory water purification systems
Waste management devices for disposable products
Other equipment and systems for waste management
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
Product category: Other equipment and systems for waste management, Sterilisation equipment, disinfection equipment and accessories, autoclaves
The management of HCW requires a careful analysis of the type, dimension, and organization of the healthcare facility. Established the priority to minimize the infectious waste produced, in emergency conditions the two most important goals are to guarantee the efficacy of the sterilization process and reduce as much as possible the storage time and transport.
It means that on-site installations of sterilization units such as Newster machines, allow to reach both targets: Considering the low resistance of coronavirus against temperature, Frictional Heat Treatment process reaching 150 °C is a useful solution in order to improve infection prevention and control through HCW, with the respect of Stockholm convention standards.
Healthcare waste treated on-site by Newster NW sterilizers when terminated the sterilization cycle can be stored for up to 28 days, cutting down on handling and transport and carbon imprint besides cutting down opportunity to spread infection/contamination, aspects that are having a major impact for the safety of populations around the globe during the COVID-19 pandemia.
Newster SANIFYCO-19 solution aims to provide a plug-and-run solution in container to be installed for solid HCW or waste water disinfection inside a hospital or on hospital grounds or in other areas during epidemic emergencies, in order to eliminate the possible spread of pathogens through the solid and liquid waste and help infection prevention and control . The container is shipped from Italy pre-assembled (or can be out-sourced in loco for cost reductions), all the required connections will be ready inside the container, so that installation and start-up will take no more than one working day. Once the emergency is over it can be moved to be used somewhere else as it does not need permanent building works. The hospital will only have to supply electricity and water supply and water discharge.
Newster Green Go provides a ready-to-use device for the military and emergency relief situations for infection and prevention control during epidemic emergencies thanks to the installation of NW5 sterilizer on a mobile trolley for the onsite treatment of healthcare waste (HCW).
It is equipped with all the devices to support the demands of air and naval military transport.The mobile sterilization unit can be installed very quickly, it is equipped with a connection to a field electric generator and has an outlet for cooling water. It can use non potable water for technical use. The treatment capacity is that of an NW5, or approximately 15 - 20 kg / hour, therefore it is adequate for a field hospital up to 100 beds.
Product category: Waste management devices for disposable products
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
Date
Topic
Download
Nov 17, 2020
New Newster Web Site Now On-Line
Nov 4, 2020
Newster installs in Ghana
Oct 19, 2020
USAID FUNDS A NW50 UNIT IN TUNISIE
> 75%
Number of employees20-49
Foundation1996