Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Sterimed Infection Control SAS
Route de Cérét,
66110
Amélie-les-Bains-Palalda
France
France
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Contact
Romain DURRANDE
Sales and Marketing director
Nathalie RICHER
MDM Sales team manager
Mélanie SASSIER
MDM Marketing & Business Development
Visit us
16.11.2020
Topic
all-day
Questions about MDM packagings? Contact Our Team Now
Do you have some questions about our MDM product range?
Questions about the best practices? Differences between the products and their application?
Are you interested in cooperation?
You can always contact our dedicated sales team:
EMEA:
Ms. Nathalie Richer Ms.Daria Tabeleva Ms. Frédérique Rihn-Maurer
nathalie.richer@sterimed.fr daria.tabeleva@sterimed.fr frederique.rihnmaurer@sterimed.fr
+33630058427 +33640554824 +33607549998
Ms. Eva Loven
eva.loven@sterimed.se
+46723286100
ASIA:
Mr. Jimmy Liu Mr.Endress Tien Ms. Grace Hui
jimmy.liu@sterimed.cn endress.tian@sterimed.cn grace.hui@sterimed.hk
+8613621922028 +86 18136950115 +85263916566
US: LATAM:
Mr. Michael Barnett Mr. Miguel Maldonado Mr. Erick Dominguez
michael.barnett@sterimed.us miguel.maldonado@grupoeee.com erick.dominguez@grupoeee.com
+1 843 801 1197 +525526265001 +5718415646
Questions about the best practices? Differences between the products and their application?
Are you interested in cooperation?
You can always contact our dedicated sales team:
EMEA:
Ms. Nathalie Richer Ms.Daria Tabeleva Ms. Frédérique Rihn-Maurer
nathalie.richer@sterimed.fr daria.tabeleva@sterimed.fr frederique.rihnmaurer@sterimed.fr
+33630058427 +33640554824 +33607549998
Ms. Eva Loven
eva.loven@sterimed.se
+46723286100
ASIA:
Mr. Jimmy Liu Mr.Endress Tien Ms. Grace Hui
jimmy.liu@sterimed.cn endress.tian@sterimed.cn grace.hui@sterimed.hk
+8613621922028 +86 18136950115 +85263916566
US: LATAM:
Mr. Michael Barnett Mr. Miguel Maldonado Mr. Erick Dominguez
michael.barnett@sterimed.us miguel.maldonado@grupoeee.com erick.dominguez@grupoeee.com
+1 843 801 1197 +525526265001 +5718415646
17.11.2020
Topic
all-day
Questions about MDM packagings? Contact Our Team Now
Do you have some questions about our MDM product range?
Questions about the best practices? Differences between the products and their application?
Are you interested in cooperation?
You can always contact our dedicated sales team:
EMEA:
Ms. Nathalie Richer Ms.Daria Tabeleva Ms. Frédérique Rihn-Maurer
nathalie.richer@sterimed.fr daria.tabeleva@sterimed.fr frederique.rihnmaurer@sterimed.fr
+33630058427 +33640554824 +33607549998
Ms. Eva Loven
eva.loven@sterimed.se
+46723286100
ASIA:
Mr. Jimmy Liu Mr.Endress Tien Ms. Grace Hui
jimmy.liu@sterimed.cn endress.tian@sterimed.cn grace.hui@sterimed.hk
+8613621922028 +86 18136950115 +85263916566
US: LATAM:
Mr. Michael Barnett Mr. Miguel Maldonado Mr. Erick Dominguez
michael.barnett@sterimed.us miguel.maldonado@grupoeee.com erick.dominguez@grupoeee.com
+1 843 801 1197 +525526265001 +5718415646
Questions about the best practices? Differences between the products and their application?
Are you interested in cooperation?
You can always contact our dedicated sales team:
EMEA:
Ms. Nathalie Richer Ms.Daria Tabeleva Ms. Frédérique Rihn-Maurer
nathalie.richer@sterimed.fr daria.tabeleva@sterimed.fr frederique.rihnmaurer@sterimed.fr
+33630058427 +33640554824 +33607549998
Ms. Eva Loven
eva.loven@sterimed.se
+46723286100
ASIA:
Mr. Jimmy Liu Mr.Endress Tien Ms. Grace Hui
jimmy.liu@sterimed.cn endress.tian@sterimed.cn grace.hui@sterimed.hk
+8613621922028 +86 18136950115 +85263916566
US: LATAM:
Mr. Michael Barnett Mr. Miguel Maldonado Mr. Erick Dominguez
michael.barnett@sterimed.us miguel.maldonado@grupoeee.com erick.dominguez@grupoeee.com
+1 843 801 1197 +525526265001 +5718415646
18.11.2020
Topic
all-day
Questions about MDM packagings? Contact Our Team Now
Do you have some questions about our MDM product range?
Questions about the best practices? Differences between the products and their application?
Are you interested in cooperation?
You can always contact our dedicated sales team:
EMEA:
Ms. Nathalie Richer Ms.Daria Tabeleva Ms. Frédérique Rihn-Maurer
nathalie.richer@sterimed.fr daria.tabeleva@sterimed.fr frederique.rihnmaurer@sterimed.fr
+33630058427 +33640554824 +33607549998
Ms. Eva Loven
eva.loven@sterimed.se
+46723286100
ASIA:
Mr. Jimmy Liu Mr.Endress Tien Ms. Grace Hui
jimmy.liu@sterimed.cn endress.tian@sterimed.cn grace.hui@sterimed.hk
+8613621922028 +86 18136950115 +85263916566
US: LATAM:
Mr. Michael Barnett Mr. Miguel Maldonado Mr. Erick Dominguez
michael.barnett@sterimed.us miguel.maldonado@grupoeee.com erick.dominguez@grupoeee.com
+1 843 801 1197 +525526265001 +5718415646
Questions about the best practices? Differences between the products and their application?
Are you interested in cooperation?
You can always contact our dedicated sales team:
EMEA:
Ms. Nathalie Richer Ms.Daria Tabeleva Ms. Frédérique Rihn-Maurer
nathalie.richer@sterimed.fr daria.tabeleva@sterimed.fr frederique.rihnmaurer@sterimed.fr
+33630058427 +33640554824 +33607549998
Ms. Eva Loven
eva.loven@sterimed.se
+46723286100
ASIA:
Mr. Jimmy Liu Mr.Endress Tien Ms. Grace Hui
jimmy.liu@sterimed.cn endress.tian@sterimed.cn grace.hui@sterimed.hk
+8613621922028 +86 18136950115 +85263916566
US: LATAM:
Mr. Michael Barnett Mr. Miguel Maldonado Mr. Erick Dominguez
michael.barnett@sterimed.us miguel.maldonado@grupoeee.com erick.dominguez@grupoeee.com
+1 843 801 1197 +525526265001 +5718415646
19.11.2020
Topic
all-day
Questions about MDM packagings? Contact Our Team Now
Do you have some questions about our MDM product range?
Questions about the best practices? Differences between the products and their application?
Are you interested in cooperation?
You can always contact our dedicated sales team:
EMEA:
Ms. Nathalie Richer Ms.Daria Tabeleva Ms. Frédérique Rihn-Maurer
nathalie.richer@sterimed.fr daria.tabeleva@sterimed.fr frederique.rihnmaurer@sterimed.fr
+33630058427 +33640554824 +33607549998
Ms. Eva Loven
eva.loven@sterimed.se
+46723286100
ASIA:
Mr. Jimmy Liu Mr.Endress Tien Ms. Grace Hui
jimmy.liu@sterimed.cn endress.tian@sterimed.cn grace.hui@sterimed.hk
+8613621922028 +86 18136950115 +85263916566
US: LATAM:
Mr. Michael Barnett Mr. Miguel Maldonado Mr. Erick Dominguez
michael.barnett@sterimed.us miguel.maldonado@grupoeee.com erick.dominguez@grupoeee.com
+1 843 801 1197 +525526265001 +5718415646
Questions about the best practices? Differences between the products and their application?
Are you interested in cooperation?
You can always contact our dedicated sales team:
EMEA:
Ms. Nathalie Richer Ms.Daria Tabeleva Ms. Frédérique Rihn-Maurer
nathalie.richer@sterimed.fr daria.tabeleva@sterimed.fr frederique.rihnmaurer@sterimed.fr
+33630058427 +33640554824 +33607549998
Ms. Eva Loven
eva.loven@sterimed.se
+46723286100
ASIA:
Mr. Jimmy Liu Mr.Endress Tien Ms. Grace Hui
jimmy.liu@sterimed.cn endress.tian@sterimed.cn grace.hui@sterimed.hk
+8613621922028 +86 18136950115 +85263916566
US: LATAM:
Mr. Michael Barnett Mr. Miguel Maldonado Mr. Erick Dominguez
michael.barnett@sterimed.us miguel.maldonado@grupoeee.com erick.dominguez@grupoeee.com
+1 843 801 1197 +525526265001 +5718415646
Our range of products
Product categories
- 01 Manufacturing of components
- 01.05 Surface treatment
- 01.05.03 Surface coating
Surface coating
- POLYBOND® AGP 90 gsm - Coated Polymer Reinforced Web 90 gsm for PVC & APET
- POLYBOND® RST 80 gsm - Surface Treated Polymer Reinforced Web 80 gsm
- POLYBOND® RST 100 gsm - Surface Treated Polymer Reinforced Web 100 gsm
- POLYBOND® BGP 90 gsm - Coated Polymer Reinforced Web 90 gsm
- POLYBOND® RHP 85 gsm - Coated Polymer Reinforced Web 85 gsm
- POLYBOND® RCP 83gsm - Coated Polymer Reinforced Web 83gsm
- POLYBOND® RHP 117 gsm - Coated Polymer Reinforced Web 117 gsm
- ETHYPEL® Performance CP 55 gsm - Coated Medical Paper Web 55 gsm
- ETHYPEL® Performance CP 63 gsm - Coated Medical Paper Web 63 gsm
- 08 Raw materials, materials, adhesives
- 08.05 Semi-finished products
Semi-finished products
- POLYBOND® AGP 90 gsm - Coated Polymer Reinforced Web 90 gsm for PVC & APET
- ETHYFLEX® HSTP 52µm - Laminated flexible film PET/PE 52µm
- ETHYFLEX® CEPE 55 gsm - Medical film 55 gsm
- ETHYFORM® FOAE 90µ - Cast formable film PA/PE 90µ
- ETHYPEL® Performance 60 gsm - Direct Seal Medical Paper Web 60 gsm
- ETHYPEL-S® 60 gsm - Steam Medical Paper Web 60gsm
- ETHYPEL-S® 70 gsm - Steam Medical Paper Web 70 gsm ETHYPEL-S® 70 gsm
- ETHYPEL® Premium ST 60 gsm - Surface Treated Medical Paper 60 gsm
- ETHYPEL® Premium ST 70 gsm - Surface Treated Medical Paper 70 gsm
- 08 Raw materials, materials, adhesives
- 08.07 Packaging materials
Packaging materials
- ETHYPEL® Performance CP 63gsm & ETHYFLEX® HSTP 52µ
- POLYBOND® RST 80 gsm & ETHYFORM® FOAE 90µ - Surface Treated Polymer Reinforced web 80 gsm to PA/PE 90µ
- ETHYWRAP® NW 60 AR Blue 60 gsm - Alcohol repellent non-woven sterilizable sheets 60 gsm
- ETHYWRAP® So52 - White | Green - Cellulose sterilizable sheets 52gsm
- ETHYWRAP® Ce60 - White | Green | Blue - Cellulose sterilizable sheets 60gsm
- ETHYWRAP® So60 - White | Green | Blue - Cellulose sterilizable sheets 60gsm
- ETHYWRAP® Rf60 - Blue | Indigo - Polymer reinforced sterilizable sheets 60gsm
Our products
Product category: Packaging materials
ETHYPEL® Performance CP 63gsm & ETHYFLEX® HSTP 52µ
General description:
Package Performances:
- A very solid sterile barrier packaging solution for woundcare applications.
- Designed for run-ability on continuous and intermitent sealing equipment.
- Tested in speeds varying from 20 to 50 m / min.
- Overall light weight coating for stability in process and higher versatility to machine and process conditions.
- Porous Web comprising more than 90 % of renewable resources, with a light weight adhesive layer enhancing seal-ability & peel ability.
- Solvent fiber coating technology with higher initiating temperature provides great storage stability.
- 2 layer laminated PET/PE with optimized heat-seal layer.
- Gloves, gauzes and active woundcare of all shapes and sizes.
Package Performances:
- Seal strength*, aseptic opening and sealing on package have been positively evaluated on blisters manufactured on industrial FFS packaging line.
Product category: Surface coating, Semi-finished products
POLYBOND® AGP 90 gsm - Coated Polymer Reinforced Web 90 gsm for PVC & APET
Top Web:
Polybond AGP 90 gsm has been designed for sealing to PVC and APET rigid material and tested on a number of web thicknesses, from 300 to 700 μ, on form fill seal packaging lines. Its unique fiber mesh structure mixes cellulose together with a high content level of synthetic binders.
It allows for an excellent fiber cohesion in large peel angles, and for superior performance in regard with prevention of the risk of break, puncture & burst.
The choice of a water-based coating technology in addition to a significant share of renewable resource based raw material content also make it a quite environmental friendly solution to your packaging needs.
Application:
Recommended for all types of products that are packed with PVC or APET film structures and that are sterilized by EO or Irradiation, such as Custom Procedure Trays, Surgical Trays or Orthopedics instruments.
Can be used as roll stock or top lid on your packaging lines. Typical seal temperature window of 130°C to 150°C.
Polybond AGP 90 gsm has been designed for sealing to PVC and APET rigid material and tested on a number of web thicknesses, from 300 to 700 μ, on form fill seal packaging lines. Its unique fiber mesh structure mixes cellulose together with a high content level of synthetic binders.
It allows for an excellent fiber cohesion in large peel angles, and for superior performance in regard with prevention of the risk of break, puncture & burst.
The choice of a water-based coating technology in addition to a significant share of renewable resource based raw material content also make it a quite environmental friendly solution to your packaging needs.
Application:
Recommended for all types of products that are packed with PVC or APET film structures and that are sterilized by EO or Irradiation, such as Custom Procedure Trays, Surgical Trays or Orthopedics instruments.
Can be used as roll stock or top lid on your packaging lines. Typical seal temperature window of 130°C to 150°C.
Product category: Surface coating
POLYBOND® RST 80 gsm - Surface Treated Polymer Reinforced Web 80 gsm
Top Web:
Embedded adhesive layer impregnating the porous web substrate on both sides for easy run-ability in all directions. Polymer-based binders strengthening the cellulosic mesh for mechanical performance. Medium porosity levels to optimize EO desorption. Controlled maximum pore size to optimize bacterial barrier & sterility maintenance after sterilization.
Application:
A unique solution to reduce the cost of your most demanding packaging designs: high seal strength, easy run-ability, clean peel opening.
Surface treated webs run in a 10°C to 15°C operating window depending on packaging lines.
Particularly adapted to tubings, IV sets, catheters, small drapes and gowns materials as well as procedure kits packed in flexible packaging.
Embedded adhesive layer impregnating the porous web substrate on both sides for easy run-ability in all directions. Polymer-based binders strengthening the cellulosic mesh for mechanical performance. Medium porosity levels to optimize EO desorption. Controlled maximum pore size to optimize bacterial barrier & sterility maintenance after sterilization.
Application:
A unique solution to reduce the cost of your most demanding packaging designs: high seal strength, easy run-ability, clean peel opening.
Surface treated webs run in a 10°C to 15°C operating window depending on packaging lines.
Particularly adapted to tubings, IV sets, catheters, small drapes and gowns materials as well as procedure kits packed in flexible packaging.
Product category: Surface coating
POLYBOND® RST 100 gsm - Surface Treated Polymer Reinforced Web 100 gsm
Top Web:
Embedded adhesive layer impregnating the porous web substrate on both sides for easy run-ability in all directions. Polymer-based binders strengthening the cellulosic mesh for mechanical performance. Medium porosity levels to optimize EO desorption. Controlled maximum pore size to optimize bacterial barrier & sterility maintenance after sterilization.
Application:
A unique solution to reduce the cost of your most demanding packaging designs: high seal strength, easy run-ability, clean peel opening.
Surface treated webs run in a 10°C to 15°C operating window depending on packaging lines.
Particularly adapted to very large & heavy packaging including CPTs and procedure packs.
Embedded adhesive layer impregnating the porous web substrate on both sides for easy run-ability in all directions. Polymer-based binders strengthening the cellulosic mesh for mechanical performance. Medium porosity levels to optimize EO desorption. Controlled maximum pore size to optimize bacterial barrier & sterility maintenance after sterilization.
Application:
A unique solution to reduce the cost of your most demanding packaging designs: high seal strength, easy run-ability, clean peel opening.
Surface treated webs run in a 10°C to 15°C operating window depending on packaging lines.
Particularly adapted to very large & heavy packaging including CPTs and procedure packs.
Product category: Packaging materials
POLYBOND® RST 80 gsm & ETHYFORM® FOAE 90µ - Surface Treated Polymer Reinforced web 80 gsm to PA/PE 90µ
General description
- A unique Sterile Barrier System that associates the technology of porous web reinforcement with the addition of synthetic binders.
- The patented surface treatment technology replaces the usual offl ine coated technology.
- Embedded adhesive layer impregnating the porous web substrate on both sides for easy run-ability in all directions.
- Polymer-based binders strengthening the cellulosic mesh for mechanical performance.
- Medium porosity levels to optimize EO desorption
- Controlled maximum pore size to optimize bacterial barrier & safety over event-related shelf life.
- A standard 7-layer cast coextruded PA/PE medical web grade, in 90 μm.
- Good formability and mechanical performance thanks to the Polyamide resins.
- PE-seal layer adapted to surface treated top web material.
- A unique solution to reduce the cost of your most demanding packaging designs: high seal strength, easy run-ability, clean peel opening.
- Surface treated webs run in a 10°C to 15°C operating window depending on packaging lines.
- Particularly adapted to tubings, IV sets, catheters, small drapes and gowns materials as well as procedure kits packed in flexible packaging and pre-filled syringes.
- Seal strength*, aseptic opening and sealing package have been positively evaluated on blisters manufactured on industrial FFS packaging line.
Product category: Surface coating
POLYBOND® BGP 90 gsm - Coated Polymer Reinforced Web 90 gsm
Top Web:
Polybond BGP 90 gsm is an innovative cellulose to polymer substrate recommended for very large peel open angles and highly demanding flexible packaging designs.
Its high level of synthetic binders content allows for an excellent fibre cohesion in large peel angles, and for superior performance in regard with prevention of the risk of break, puncture & burst.
The choice of a water-based coating technology in addition to a significant share of renewable resource based raw material content also make it a quite environmental friendly solution to your packaging needs.
Application:
Recommended for all types of products that are packed with film structures including a PE-seal layer and that are sterilized by EO or Irradiation.
Can be used for long and narrow packs as well as very bulky ones. Typical seal temperature window of 130°C to 150°C.
Polybond BGP 90 gsm is an innovative cellulose to polymer substrate recommended for very large peel open angles and highly demanding flexible packaging designs.
Its high level of synthetic binders content allows for an excellent fibre cohesion in large peel angles, and for superior performance in regard with prevention of the risk of break, puncture & burst.
The choice of a water-based coating technology in addition to a significant share of renewable resource based raw material content also make it a quite environmental friendly solution to your packaging needs.
Application:
Recommended for all types of products that are packed with film structures including a PE-seal layer and that are sterilized by EO or Irradiation.
Can be used for long and narrow packs as well as very bulky ones. Typical seal temperature window of 130°C to 150°C.
Product category: Surface coating
POLYBOND® RHP 85 gsm - Coated Polymer Reinforced Web 85 gsm
Top Web:
Recommended for packaging of drapes, gowns, pre-filled syringes or lab sponges type of products as well as all other medical devices that require mechanical strength, flexibility of web when peel opening and high seal performance for safety during packaging in shipper cases, sterilization and transport.
- High fiber cohesion material mixing cellulose and polymer binders. Strong resistance to puncture, tear and burst.
- An optimized layer of adhesive coating for excellent seal and peel.
- Perfect aseptic opening and tamper evidence, excellent printability and registration control.
Recommended for packaging of drapes, gowns, pre-filled syringes or lab sponges type of products as well as all other medical devices that require mechanical strength, flexibility of web when peel opening and high seal performance for safety during packaging in shipper cases, sterilization and transport.
Product category: Surface coating
POLYBOND® RCP 83gsm - Coated Polymer Reinforced Web 83gsm
Top Web:
- Synthetic binders associated with renewable cellulosebased raw materials for a strong top web solution which can withstand both EO & Irradiation sterilization.
- Web flexibility in large peel angle, excellent printability and registration make it easy to run material on newer Form Fill Seal packaging lines.
- The combination of reinforced materials and medium thickness gauge is particularly adapted for the packaging of medical devices that require a large peel angle.
- The repeatability of the seal performance also provides a high level of safety.
- A sterile barrier system particularly fit for catheters, tubings, infusion sets, but also for small gowns or kits which are packed in flexible formable packaging.
Product category: Surface coating
POLYBOND® RHP 117 gsm - Coated Polymer Reinforced Web 117 gsm
Top Web:
Overall coated web made of polymer binders mixed with cellulose, for very high resistance to burst & tear, excellent fiber cohesion of material and very high seal strength values. With a renewable resource content of more than 70% for best possible environmental performance, the Polybond® RHP 117 gsm has been designed to seal to flexible formable film grades such as PA/PE, PP/PA/PE or EVA/Surlyn/EVA substrates.
Application:
Polybond® RHP 117 gsm features make it the product of choice for the packaging of very large drapes & gowns. It has also been qualified as a peel pouch material which could complete or replace header bag or Tyvek to PET-PE peel pouch types of packaging for very large size of devices.
*Tyvek is a trademark from DUPONT company
Overall coated web made of polymer binders mixed with cellulose, for very high resistance to burst & tear, excellent fiber cohesion of material and very high seal strength values. With a renewable resource content of more than 70% for best possible environmental performance, the Polybond® RHP 117 gsm has been designed to seal to flexible formable film grades such as PA/PE, PP/PA/PE or EVA/Surlyn/EVA substrates.
Application:
Polybond® RHP 117 gsm features make it the product of choice for the packaging of very large drapes & gowns. It has also been qualified as a peel pouch material which could complete or replace header bag or Tyvek to PET-PE peel pouch types of packaging for very large size of devices.
*Tyvek is a trademark from DUPONT company
Product category: Semi-finished products
ETHYFLEX® CEPE 55 gsm - Medical film 55 gsm
Bottom Web:
- A low substance material associating 35 gsm of medical grade paper with 20 gsm of PE seal layer.
- PE-grade quality and paper material have both been selected specifically for medical device packaging applications,
- Product is suitable for EO & Irradiation sterilization, and designed to seal to grid and overall coated medical paper grades.
- Particularly adapted for sealing to Ethypel coated medical paper product line.
- Material designed to run on four side seal packaging lines at speed of up to 40 m / min.
- Suitable for packaging of active woundcare, gloves and gauzes.
- Easy to print and low weight for reduced environmental impact.
Product category: Semi-finished products
ETHYFORM® FOAE 90µ - Cast formable film PA/PE 90µ
Bottom Web:
- A standard 7-layer cast coextruded PA/PE medical web grade, in 90 μm.Good formability and mechanical performance thanks tothe Polyamide resins.
- PE-seal layer adapted to surface treated top web material.
- A unique solution to reduce the cost of your most demanding packaging designs: high seal strength, easy run-ability, clean peel opening.
- Surface treated webs run in a 10°C to 15°C operating window depending on packaging lines.
- Particularly adapted to tubings, IV sets, catheters, small drapes and gowns materials as well as procedure kits packed in flexible packaging and pre-filled syringes.
Product category: Packaging materials
ETHYWRAP® NW 60 AR Blue 60 gsm - Alcohol repellent non-woven sterilizable sheets 60 gsm
Product Description:
Wrapping blue material with alcohol repellent properties, used as a second layer of protection for medical devices inside the sterile barrier packaging. The addition of synthetic binders & fibers to the cellulose fiber mesh provides easier folding properties and stronger mechanical performance to the packaging material, with higher stretch, tear and burst performance than for regular crepe protection wrap materials.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination).
Wrapping blue material with alcohol repellent properties, used as a second layer of protection for medical devices inside the sterile barrier packaging. The addition of synthetic binders & fibers to the cellulose fiber mesh provides easier folding properties and stronger mechanical performance to the packaging material, with higher stretch, tear and burst performance than for regular crepe protection wrap materials.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination).
Product category: Packaging materials
ETHYWRAP® So52 - White | Green - Cellulose sterilizable sheets 52gsm
Product Description:
Wrapping white material used as a second layer of protection for medical devices inside the sterile barrier packaging. A specific treatment is applied to the material to improve its stretch and softness properties for easier faster folding on packaging lines.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination).
Wrapping white material used as a second layer of protection for medical devices inside the sterile barrier packaging. A specific treatment is applied to the material to improve its stretch and softness properties for easier faster folding on packaging lines.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination).
Product category: Packaging materials
ETHYWRAP® Ce60 - White | Green | Blue - Cellulose sterilizable sheets 60gsm
Product Description:
Wrapping material used as a second layer of protection for medical devices inside the sterile barrier packaging.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination). Available in different colors according to your need.
Wrapping material used as a second layer of protection for medical devices inside the sterile barrier packaging.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination). Available in different colors according to your need.
Product category: Packaging materials
ETHYWRAP® So60 - White | Green | Blue - Cellulose sterilizable sheets 60gsm
Product Description:
Wrapping white material used as a second layer of protection for medical devices inside the sterile barrier packaging. A specific treatment is applied to the material to improve its stretch and softness properties for easier faster folding on packaging lines.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination).
Wrapping white material used as a second layer of protection for medical devices inside the sterile barrier packaging. A specific treatment is applied to the material to improve its stretch and softness properties for easier faster folding on packaging lines.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination).
Product category: Packaging materials
ETHYWRAP® Rf60 - Blue | Indigo - Polymer reinforced sterilizable sheets 60gsm
Product Description:
Wrapping blue material used as a second layer of protection for medical devices inside the sterile barrier packaging. The addition of synthetic binders to the cellulose fiber mesh provides easier folding properties and stronger mechanical performance to the packaging material, with higher stretch, tear and burst performance than for regular crepe protection wrap materials.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination).
Wrapping blue material used as a second layer of protection for medical devices inside the sterile barrier packaging. The addition of synthetic binders to the cellulose fiber mesh provides easier folding properties and stronger mechanical performance to the packaging material, with higher stretch, tear and burst performance than for regular crepe protection wrap materials.
Application:
Recommended for use as inner/outer protection layer around your medical devices prior to manufacturing of your final sterile barrier system packaging. Commonly used for drapes, gowns and custom procedure kits. Manufactured in facilities and on production lines 100% dedicated to healthcare packaging requirements to ensure of best possible safety (product compliance, product traceability, prevention of cross contamination).
Product category: Surface coating
ETHYPEL® Performance CP 55 gsm - Coated Medical Paper Web 55 gsm
Top Web:
Overall coated web to pack the lightest medical devices on platten and 4 side seal packaging line equipment. Designed for EO sterilization and very flat and low weight products, Ethypel® Performance CP 55 gsm product demonstrates very good run ability in a wide window of speed and temperature, and a very consistant seal strength performance when sealed to PET-PE film grades.
Application:
Ethypel® Performance CP 55 gsm has been developed having in mind the woundcare industry, where packaging shape is flat, speed of output is critical, and ability to maintain sterility over time a must. Fully compliant to ISO11607-1 & EN868-6 standards, this packaging material has been tested and qualified on multiple packaging line technologies in Europe and Asia.
Overall coated web to pack the lightest medical devices on platten and 4 side seal packaging line equipment. Designed for EO sterilization and very flat and low weight products, Ethypel® Performance CP 55 gsm product demonstrates very good run ability in a wide window of speed and temperature, and a very consistant seal strength performance when sealed to PET-PE film grades.
Application:
Ethypel® Performance CP 55 gsm has been developed having in mind the woundcare industry, where packaging shape is flat, speed of output is critical, and ability to maintain sterility over time a must. Fully compliant to ISO11607-1 & EN868-6 standards, this packaging material has been tested and qualified on multiple packaging line technologies in Europe and Asia.
Product category: Surface coating
ETHYPEL® Performance CP 63 gsm - Coated Medical Paper Web 63 gsm
Top Web:
Synthetic binders associated with renewable cellulose-based raw materials for a strong top web solution which can withstand both EO & Irradiation sterilization.
Web flexibility in large peel angle, excellent printability and registration make it easy to run material on newer Form Fill Seal packaging lines.
Application:
The combination of reinforced materials and medium thickness gauge is particularly adapted for the packaging of medical devices that require a large peel angle.
The repeatability if the seal performance also provides a high level of safety.
A sterile barrier system particularly fit for catheters, tubing, infusion sets, but also for small gowns or kits which are packed in flexible formable packaging.
Synthetic binders associated with renewable cellulose-based raw materials for a strong top web solution which can withstand both EO & Irradiation sterilization.
Web flexibility in large peel angle, excellent printability and registration make it easy to run material on newer Form Fill Seal packaging lines.
Application:
The combination of reinforced materials and medium thickness gauge is particularly adapted for the packaging of medical devices that require a large peel angle.
The repeatability if the seal performance also provides a high level of safety.
A sterile barrier system particularly fit for catheters, tubing, infusion sets, but also for small gowns or kits which are packed in flexible formable packaging.
Product category: Semi-finished products
ETHYPEL® Performance 60 gsm - Direct Seal Medical Paper Web 60 gsm
Top Web:
A pure cellulose material with enhanced seal & peel performance thanks to chemical impregnation at the web surface. Designed for low to medium seal strength values when sealed to PA-PE or PP-PE formable flexible film structures, the Ethypel Performance is particularly fit for packaging on form fill seal machines at medium to low speed processes (1,2 to 2,5 sec dwell time).
Application:
Ethypel® Performance is mainly used for packaging of gauzes, cotton buds and other light weight single use medical devices. Due to its low grammage & limited amount of chemical content, it is particularly recommended for low weight devices that present limited risk of puncture and risk of mechanical stress on seal areas during packaging and transport.
A pure cellulose material with enhanced seal & peel performance thanks to chemical impregnation at the web surface. Designed for low to medium seal strength values when sealed to PA-PE or PP-PE formable flexible film structures, the Ethypel Performance is particularly fit for packaging on form fill seal machines at medium to low speed processes (1,2 to 2,5 sec dwell time).
Application:
Ethypel® Performance is mainly used for packaging of gauzes, cotton buds and other light weight single use medical devices. Due to its low grammage & limited amount of chemical content, it is particularly recommended for low weight devices that present limited risk of puncture and risk of mechanical stress on seal areas during packaging and transport.
Product category: Semi-finished products
ETHYPEL-S® 60 gsm - Steam Medical Paper Web 60gsm
Top Web:
A cellulose-based substrate developed to pack single use medical devices that will be steam sterilized.
Ethypel-S® 60 gsm has been designed to seal to the PP seal layer of PA-PP formable flexible film, with medium seal strength and excellent peel open properties.
Application:
Ethypel-S® 60 gsm has been designed with intended sterility maintenance of no less than 3 years. It is recommended for the packaging of gauzes, swabs & other light weight devices.
Steam sterilization is recognized as one of the least impacting sterilization practice on the environment, using water & heat.
Sterimed has developed a whole range of solutions to pack devices of all weights & sizes, that can be steam sterilized, with a high level of safety through optimal bacterial filtration efficiency, controlled maximum pore size, and eco-designed packaging focus.
A cellulose-based substrate developed to pack single use medical devices that will be steam sterilized.
Ethypel-S® 60 gsm has been designed to seal to the PP seal layer of PA-PP formable flexible film, with medium seal strength and excellent peel open properties.
Application:
Ethypel-S® 60 gsm has been designed with intended sterility maintenance of no less than 3 years. It is recommended for the packaging of gauzes, swabs & other light weight devices.
Steam sterilization is recognized as one of the least impacting sterilization practice on the environment, using water & heat.
Sterimed has developed a whole range of solutions to pack devices of all weights & sizes, that can be steam sterilized, with a high level of safety through optimal bacterial filtration efficiency, controlled maximum pore size, and eco-designed packaging focus.
Product category: Semi-finished products
ETHYPEL-S® 70 gsm - Steam Medical Paper Web 70 gsm ETHYPEL-S® 70 gsm
Top Web:
A cellulose-based substrate developed to pack single use medical devices that will be steam sterilized.
ETHYPEL-S® 70 gsm has been designed to seal to the PP seal layer of PA-PP formable flexible film, with medium seal strength and excellent peel open properties.
Application:
ETHYPEL-S® 70 gsm has been designed with intended sterility maintenance of no less than 3 years. It is recommended for the packaging of gauzes, swabs & other light weight devices.
Steam sterilization is recognized as one of the least impacting sterilization practice on the environment, using water & heat.
Sterimed has developed a whole range of solutions to pack devices of all weights & sizes, that can be steam sterilized, with a high level of safety through optimal bacterial filtration efficiency, controlled maximum pore size, and eco-designed packaging focus.
A cellulose-based substrate developed to pack single use medical devices that will be steam sterilized.
ETHYPEL-S® 70 gsm has been designed to seal to the PP seal layer of PA-PP formable flexible film, with medium seal strength and excellent peel open properties.
Application:
ETHYPEL-S® 70 gsm has been designed with intended sterility maintenance of no less than 3 years. It is recommended for the packaging of gauzes, swabs & other light weight devices.
Steam sterilization is recognized as one of the least impacting sterilization practice on the environment, using water & heat.
Sterimed has developed a whole range of solutions to pack devices of all weights & sizes, that can be steam sterilized, with a high level of safety through optimal bacterial filtration efficiency, controlled maximum pore size, and eco-designed packaging focus.
Product category: Semi-finished products
ETHYPEL® Premium ST 60 gsm - Surface Treated Medical Paper 60 gsm
Top Web:
A state of the art packaging material for medical device companies & peel pouch manufacturers keen to secure solid sterile barrier systems performance: very high repeatability from one lot to another and stability in seal strength thanks to online surface treatment, strong fiber cohesion for aseptic opening, and a chemical paper to film binding which contributes to a 10% to 20% higher seal strength than the common "uncoated medical paper" packaging materials.
Application:
Ethypel Premium ST 60 gsm is the #1 packaging material for single use syringes. It also holds unique market share in the peel pouch manufacturing industry thanks to the high speed output, high versatility to film types & multidirectional seal & peel performance its surface treatment allows. Other applications include pipettes, gauzes and other light weight medical devices.
A state of the art packaging material for medical device companies & peel pouch manufacturers keen to secure solid sterile barrier systems performance: very high repeatability from one lot to another and stability in seal strength thanks to online surface treatment, strong fiber cohesion for aseptic opening, and a chemical paper to film binding which contributes to a 10% to 20% higher seal strength than the common "uncoated medical paper" packaging materials.
Application:
Ethypel Premium ST 60 gsm is the #1 packaging material for single use syringes. It also holds unique market share in the peel pouch manufacturing industry thanks to the high speed output, high versatility to film types & multidirectional seal & peel performance its surface treatment allows. Other applications include pipettes, gauzes and other light weight medical devices.
Product category: Semi-finished products
ETHYPEL® Premium ST 70 gsm - Surface Treated Medical Paper 70 gsm
Top Web:
A unique porous web packaging solution for medical device companies & peel pouch manufacturers keen to secure solid sterile barrier systems performance associated with strong resistance to tear & burst and high bacterial filtration efficiency. Very high repeatability from one lot to another and stability in seal strength thanks to online surface treatment, strong fiber cohesion for aseptic opening, and a chemical paper to film binding which contributes to a 10% to 20% higher seal strength than the common "uncoated medical paper" packaging materials.
Application:
Ethypel Premium ST 70 gsm is the ideal solution for medical device companies & peel pouch manufacturers that are keen to pack multiple devices with one single sound & secure packaging material without the need for coating layer. Large fill volume single use syringes, lab sponges, tubings & IV Sets can all be packed with this surface treated packaging material that can be run in multidirection with very stable seal and peel performance results.
A unique porous web packaging solution for medical device companies & peel pouch manufacturers keen to secure solid sterile barrier systems performance associated with strong resistance to tear & burst and high bacterial filtration efficiency. Very high repeatability from one lot to another and stability in seal strength thanks to online surface treatment, strong fiber cohesion for aseptic opening, and a chemical paper to film binding which contributes to a 10% to 20% higher seal strength than the common "uncoated medical paper" packaging materials.
Application:
Ethypel Premium ST 70 gsm is the ideal solution for medical device companies & peel pouch manufacturers that are keen to pack multiple devices with one single sound & secure packaging material without the need for coating layer. Large fill volume single use syringes, lab sponges, tubings & IV Sets can all be packed with this surface treated packaging material that can be run in multidirection with very stable seal and peel performance results.
About us
Company details
STERIMED Infection Control has an history which spans over more than 100 years of industrial know how.
Its DNA is nurtured with an entrepreneurship and customer-focus culture which has helped it grow from a paper manufacturer located in the South of France to a world leader in packaging materials for the healthcare industry.
STERIMED Infection Contol develops tailor-made products and unique expertise thanks to its direct contact with our end users in the medical devices manufacturing industry as well as on the field in hospital Central Sterile Supply Departments, all around the world.
Thanks to its staff and its partners, STERIMED Infection Control
is nowadays present through industrial facilities on 3 continents,
offering fast supply of highly reliable materials manufactured in
100% healthcare dedicated premises.
Its DNA is nurtured with an entrepreneurship and customer-focus culture which has helped it grow from a paper manufacturer located in the South of France to a world leader in packaging materials for the healthcare industry.
STERIMED Infection Contol develops tailor-made products and unique expertise thanks to its direct contact with our end users in the medical devices manufacturing industry as well as on the field in hospital Central Sterile Supply Departments, all around the world.
Thanks to its staff and its partners, STERIMED Infection Control
is nowadays present through industrial facilities on 3 continents,
offering fast supply of highly reliable materials manufactured in
100% healthcare dedicated premises.
Company data
Export content> 75%
Number of employees500-999
Foundation1911
Area of business- Components, parts, modules, Original Equipment Manufacturers
- Raw materials and adhesives
- Packaging and print
- Services