Provaset T2 is the latest compact equipment for leak tests by absolute pressure decay. Its strengths are the compact size and the high performances that make this product extremely reliable and versatile. Provaset T2 is designed for manual use on bench in limited areas, especially in medical segment and in cleanrooms, but it can be integrated on automatic systems managed by PLC too. Leak test full-scale ranges: up to 6 bar
Dosaset is a dispenser for cyclohexanone or similar solvents, used for manual bonding of plastic components, disposables, tubes and joints. It employs a new patented method, based on a rotating and vibrating system. It does not use porous elements or capillary holes or fluid pumps. Its adapters are directly dipped into the solvent, avoiding blockage or obstructions.
LTC is the universal instrument for the periodical check and calibration of the testing equipment. Moreover, the integrated leak simulator allows to exactly verify the accuracy of the testing system. The LTC instrument is connected in derivation between the testing equipment and the object being tested with the provided quick-coupling Staubli® “T” fitting. · Pressure up to 10 bar · Full scale flow up to 950 cm3/min · Vacuum full scales are available
Provaset T3LP is an equipment for leak tests by absolute pressure decay measurement. It is one of the peak products in this series thanks to the possibility to perform not only leak tests but also destructive burst test, safety valves opening checks, volumetric control, obstruction tests and “in bell” tests on sealed products or by interception method. Leak test with full-scale ranges: up to 30 bar – vacuum. T3LPF: Provaset T3LPF is an instrument for flow test with mass flow sensor but also for leak test with absolute pressure decay measurement. Its pneumatic circuit that can perform both flow and leak test, makes this instrument useful in many applications. Flow measurement with mass sensor full-scale ranges: between 50 cm3/min and 300 l/minT2
Since more than 30 years, Tecna designs and produces Air Leak and Flow Testing Solutions. Tecna was established in the “medical district” of Mirandola, Italy, along with the most important companies worldwide and for this reason can grant an high level specialization in medical disposables leak testing.