Huons Medicare Co., Ltd. of Busan at MEDICA 2019 in Düsseldorf -- MEDICA - World Forum for Medicine
Manage stand orders
Select Option
Manufacturers

Huons Medicare Co., Ltd.

22, Noksansandan 165-ro, Gangseo-gu, 46752 Busan
Korea, Republic
Telephone +82 70 7410 8992
Fax +82 70 7426 8990
jake@huonsmedicare.com

This company is co-exhibitor of
Korea Medical Devices Industrial Coop. Association (KMDICA)

Hall map

MEDICA 2019 hall map (Hall 16): stand A56

Fairground map

MEDICA 2019 fairground map: Hall 16

Our range of products

Product categories

  • 01  Electromedical Equipment / Medical Technology
  • 01.10  Hygiene / sterilisation / disinfection
  • 01.10.03  Washers, disinfectors

Washers, disinfectors

Our products

Product category: Washers, disinfectors

TBXzyme

[Appearance]

  • Transparent liquid for external use with yellow bubbles in a translucent white plastic container
[How to Use TBXzyme®  Solution]
1) Open the lid of TBXzyme(1L) and mov the solution to the measuring cup at the dilution rate using force.
2) Add 0.5% (200 times) of diluted solution to the water prepared.
3) Immerse devices in the diluted solution for 10 minutes
4) After soaking, clean the utensils thoroughly with clean water.
5) Remove water and dry. 

More Less

Product category: Washers, disinfectors

Hu-Scrub

[Appearance]
  • Transparent liquid in a translucent container
[How to Use Hu-Scrub®  Solution]
  • Apply the product to the hand 

More Less

Product category: Washers, disinfectors

SCOTELIN

1. Mix the Base (4L) and Additive (90ml)

2. Wet the pre-cleaned medical devices thoroughly with theprepared disinfectant solution.
(Soak devices and machines with fine holes or complicatedstructures with thoroughly prepared disinfectant using pressing injection or absorption.If necessary, use after leak testing.)

 3. Wet thoroughly for more than 5 minutes (more than 10 minutesfor spore sterilization).

4. Rinse for more than 15 seconds in the running sterilepurified water after thoroughly soaking.
(Depending on the purpose of use, excess amount water can beused. In the case of devices with fine holes or complicated structures, inject sterilepurified water or water with pressure or spend more time rinsing to throughlywash as disinfection solution can remain inside.

* Before disinfecting please check that the PAA concentration is 500 ppm or more on the test strip.

More Less