Sensa Core Medical Instrumentation Pvt. Ltd. of Hyderabad at MEDICA 2019 in Düsseldorf -- MEDICA - World Forum for Medicine
Manage stand orders
Select Option
Manufacturers

Sensa Core Medical Instrumentation Pvt. Ltd.

Plot No. 3, EPIP Zone, Pashamylaram, Sangareddy District, Telangana, 502307 Hyderabad
India
Telephone +91 95 42297771
Fax +91 8455 223410
info@sensacore.com

This company is co-exhibitor of
India Trade Promotion Organisation

Hall map

MEDICA 2019 hall map (Hall 1): stand G25

Fairground map

MEDICA 2019 fairground map: Hall 1

Contact

Ravi Kumar Meruva

Chief Executive Officer

Hyderabad, India

Phone
+91-9866861878

Email
ravi.meruva@sensacore.com

Pavan Chandra Nagoor Naralasetty

AGM-Business Development

Hyderabad, India

Phone
+91-9542297771

Email
pavan@sensacore.com

Our range of products

Product categories

  • 03  Diagnostic Tests
  • 03.01  Clinical chemistry
  • 03.01.01  Glucose testing
  • 03  Diagnostic Tests
  • 03.01  Clinical chemistry
  • 03.01.05  Other equipment for clinical chemistry
  • 03  Diagnostic Tests
  • 03.03  Haematology / histology / cytology testing
  • 03.03.01  Haematology analyzers

Our products

Product category: Haematology analyzers

Arterial Blood Gas Analyzers (ST-200CC ABGEM Analyzer)

The SensaCore ST-200 CC® Blood Gas Analyzer-ABGEM is the most cost-effective solution designed to cater the requirement of smaller & medium laboratories tasked with the challenge of performing fast-turnaround critical care tests.

The automated operation of ST-200 CC® Blood Gas Analyzer-ABGEM supports low-to-medium throughput with user friendly interface that’s ready to generate accurate results with minimum operator involvement.

Liquid buffers are combined with Calibrated Gases to create a compact reagent module containing multiple single-phase calibrants. All analyzer components 

ST-200 CC® Blood Gas Analyzer-ABGEM have been designed into user friendly modules which can be easily accessible to the user.

Unlike rest of the ABG analyzers, maintenance of Sensa Core’s ST-200 CC® Blood Gas Analyzer is limited to the replacement of Reagent Pack, Maintenance Free Electrodes and Pump Tube which are just plug and play. Depending upon customer requirement ST-200 CC can be upgraded as well as downgraded to 16 different combinations.

Sample Volume : 180 µL
Sample Type : Whole Blood, Serum, Plasma, CSF & Diluted Urine
Parameters : (ABG: pH, pCO2, pO2, Hct) (ISE : Na, K, iCa, Cl, Li, pH) (Calc : Hb, HCO3, BE, BE-B, BE-ECF, TCO2, AG, AG(K), O2 Sat, O2 Ct, SBC)
External Integration : Barcode, Scanner, Mouse, Keypad (Any 2 at a Time) & LIS Integration (Serial Port)
Dimensions : 15" W x 12" H x 7" D
Weight : 8 Kg
Colour : Pearl White
Pump Mechanism : Long Lasting Comprehensive Lyte
Sample Storage : 200000+
Language/s : 94+ Languages
Auto Sampler : Not Available
Principle : Direct Measurement with ISE, Impedence (Hct) and Amperometry (pO2)
Parameter Combinations : 16 Combinations
Touch Screen : Available (Capacitive Touch)
Operating System : Android
External Battery : Available (Optional)
Input Voltage : 110/115-V AC, 50-60 Hz or 220V AC, 5060 Hz, 0.75 amp.
Print Result : 2 Inch 24 Column Thermal Printer
Operating Atmosphere : Temperature: 5 - 40 Degrees C, <85% Moisture
Acquirable Results / Hour : 30 Results
Result Time : 2 Minutes
Sample Mechanism : Semi Auto Sampling
Display : 7 inch

More Less

Product category: Other equipment for clinical chemistry

ST-200 Pro Electrolyte Analyzer

Sensa Core’s ST-200 Pro Electrolyte Analyzer is completely automated, microprocessor controlled electrolyte system that uses current ISE technology to make electrolyte measurements. The ST-200 Pro product measures various combinations of sodium, potassium, Ionized Calcium, Lithium, pH and Chloride in whole blood, serum, plasma, and urine.

SensaCore's ST-200Pro / ST-200CL / 200Plus / 100B Electrolyte Analyzer products are specifically designed to meet the needs of small to medium-size laboratories by Inventing and developing the latest technology, Sensa Core’s Electrolyte Analyzers improve lab productivity, while delivering sample results economically. Snap-in electrode design, combined with precise control of calibrator volumes, ensure economical operation and a low cost per sample in our Analyzers.

Maintenance of Sensa Core's Electrolyte Analyzers is limited to the replacement of Reagent Pack, Maintenance Free Electrodes, Disposable Valve and Pump Tube which are just plug and play. Depending upon customer requirement ST-200Pro is Available in two variants in terms of Sampling procedure.

Sample Volume : 140 uL
Touch Screen : 7 inch
Operating System : Android
External Battery : Available (Optional)
Input Voltage : 110/115-V AC, 50-60 Hz or 220V AC, 5060 Hz, 0.75 amp.
Print Result : 2 Inch 24 Column Thermal Printer
Operating Atmosphere : Temparature: 5 - 40 Degrees C, <85% Moisture
Acquirable Results / Hour : 55 Results
Result Time : 65 Seconds
Sample Mechanism : Self Wiping Flip / Flip
Parameter Combinations : 10 Combinations
Principle : Direct Measurement with ISE
Auto Sampler : Not Available
Sample Type : Whole Blood, Serum, Plasma, CSF & Diluted Urine
Parameters : Na, K, iCa, Cl, Li, pH
External Integration : Barcode, Scanner, Mouse, Keypad (Any 2 at a Time) & LIS Integration (Serial Port)
Dimensions : 15 Width x 13 Length x 7 Height (Inch)
Weight : 4.3 Kilograms
Colour : Pearl White
Pump Mechanism : Long Lasting Comprehensive Lyte
Sample Storage : 200000+
Language/s : 94+ Languages
Display : 7

More Less

Product category: Glucose testing

Gluco Spark Glucose Measuring System

SensaCore's Gluco Spark is India's fist, next generation, highly advanced ultra low volume glucose monitoring system available at affordable price. This glucometer works on advanced biosensor technology and uses only 0.5 micro liter sample volume and gives results in 5 sec.

Sensa Core's Gluco Spark uses carbon electrodes to ensure precise results. Gluco Spark strips are manufactured with tight tolerance and do not require any coding. Sensa Core’s Biosensor Technology solves a number of immediate technical problems related to glucose strip by significantly enabling sensitive and accurate performance of glucose strip in a cost-effective way.

Glucose ranges : 20 - 800 mg/dL
Fill detection : Automatic
Sample mode : Capillary
Sample : Whole blood
Sample volume : 0.5 µL
Analysis time : 5 Seconds
Battery : 3v Lithium Battery (CR2032) Lasts for 1000 tests
Relative Humidity : 10-95% (Non Condensing)
Operating Temp. : 2-50 Degree Centigrade
Strips Storage Temp. : 0-50 Degree Centigrade
interference : Minimal
Memory : 500 Readings
Shelf life of strips : 24 months (from manuf. date)
Battery : CR2032, Lasts for 1000 tests
Display : 48 mm (diagonally) LCD

More Less

Product category: Other equipment for clinical chemistry

ST - 100B Electrolyte Analyzers

SensaCore’s ST-100B Electrolyte analyzer is completely automated, microprocessor controlled electrolyte system that uses current ISE technology to make electrolyte measurements. The ST-100B product measures various combinations of sodium, potassium, Ionized Calcium, Lithium, pH Bicarbonate and Chloride in whole blood, serum, plasma, and urine.

Sensa Core's ST-200CL / 200Plus / 100B Electrolyte Analyzer products are specifically designed to meet the needs of small to medium-size laboratories by Inventing and developing the latest technology, Sensa Core’s electrolyte analyzers improve lab productivity, while delivering sample results economically. Snap-in electrode design, combined with precise control of calibrator volumes, ensure economical operation and a low cost per sample in our Analyzers.

Maintenance of Sensa Core's Electrolyte Analyzers is limited to the replacement of Reagent Pack, Maintenance Free Electrodes, Disposable Valve and  Pump Tube which are just plug and play. Depending upon customer requirement ST-100B is Available in one variant in terms of Sampling procedure.

Sample Volume : 140 uL
Touch Screen : Not Available
Operating System : Embedded C
External Battery : Available (Optional)
Input Voltage : 110/115-V AC, 50-60 Hz or 220V AC, 5060 Hz, 0.75 amp.
Print Result : 2 Inch 24 Column Thermal Printer
Operating Atmosphere : Temparature: 5 - 40 Degrees C, <85% Moisture
Acquirable Results / Hour : 55 Results
Result Time : 65 Seconds
Sample Mechanism : Flip
Parameter Combinations : 12
Principle : Direct Measurement with ISE
Auto Sampler : Not Available
Sample Type : Whole Blood, Serum, Plasma, CSF & Diluted Urine
Parameters : Na, K, iCa, Cl, Li, pH, HCO3, PCO2, TCO2
External Integration : LIS Integration (Serial Port)
Dimensions : 15 Width x 12 Length x 7 Height (Inch)
Weight : 6 Kilograms
Colour : Pearl White
Pump Mechanism : Long Lasting Comprehensive Lyte
Sample Storage : 100000 Results
Language/s : English
Display : 128 * 64 Graphic Display

More Less

Product category: Glucose testing

Lacto Spark Lactate Measuring System

SensaCore's Lacto Spark measures blood lactate very quickly on a very small drop of blood. This results in a virtually painless, yet fast and accurate to test lactate.

Lacto Spark is a hand-held lactate analyzer that requires just 0.5 µl of capillary blood and returns results in 5 seconds. Up to 500 results can be stored on the device which might also be very much useful for performance measurement.

Sensa Core's Lacto Spark intends to become the world leader in hospital-based, blood lactate analyzers. More hospitals worldwide can use Sensa Core's Lacto Spark for lactate measurements than any other brand due to the affordobility, user friendliness as well as the accurate results with quick analysis time. The high standards for accuracy and reliability that are required for hospital use have been incorporated into the Lacto Spark meter.

Lacto Spark meters and strips are priced far economical than most other similar devices.

Lactate ranges : 1-20 mmol/L
Analysis time : 5 Seconds
Sample volume : 0.5µL
Sample : Whole blood
Sample mode : Capillary
Fill detection : Automatic
Display : 48 mm (Diagonally)
Battery : CR2032, Lasts for 1000 test
Shelf life of strips : 15 months (from manuf. date)
Memory : 500 Readings

More Less

About us

Company details

SensaCore Medical Instrumentation intends to become an Innovative World Class Medical Diagnostics Instrument Manufacturer. SensaCore’s mission is to provide Hospitals, Pathological Laboratories and OEM clients and Patients with Advanced Analytical and Diagnostics Analyzers and Hand-Held Devices, which would improve Patient Outcomes and Reduce the Cost of Medical and Healthcare Services. We will ensure that we deliver products (Blood Gas Analyzers, Electrolyte Analyzers, Glucose Meters &Lactate Meters) of the Highest Quality and ensure our Products are User-Friendly, Low Maintenance, Easy to Operate and Easy to Afford.

Sensa Core designs, develops, Manufactures and sells analyzers based on advanced technologies (Ion-Selective Electrodes, Amperometric Biosensors and Spectrophotometry). Sensa Core employ over 250 people, and has more than 50 Distributors network spread over 35 countries around the world.

In addition to that Sensa Core’s flagship Ion-Selective Electrode (ISE) technology powers at least 20 different branded electrolyte analyzers. Sensa Core’s OEM Contract Division develops and manufactures Customized Analyzers for many of the world’s leading healthcare corporations on their brand name. Sensa Core designs analyzers with state of the art features (touch screen, barcode reader, LIS integration, Multiple languages, multiple parameter selection) without compromising on quality and reliability.

More Less

Company data

Sales volume

10-49 Mio US $

Export content

max. 25%

Number of employees

100-499

Foundation

2006

Area of business
  • Laboratory Equipment
  • Diagnostics