INTROTEK INTERNATIONAL LP of Edgewood, NY at COMPAMED 2019 in Düsseldorf -- MEDICA - World Forum for Medicine
Manufacturers

INTROTEK INTERNATIONAL LP

6 Daremy Lane, 11717 Edgewood, NY
USA
Telephone +1 631 987-8734
Fax +1 631 242-5260
sales@introtek.com

Hall map

COMPAMED 2019 hall map (Hall 8a): stand L12

Fairground map

COMPAMED 2019 fairground map: Hall 8a

Our range of products

Product categories

  • 02  Manufacturing of finished products
  • 02.16  Laboratory technologies
  • 02.16.01  Lab-on-a-chip

Lab-on-a-chip

  • 05  Components, modules, OEM equipment
  • 05.13  Other components, modules, OEM equipment
  • 06  Electrical components, electronical components
  • 06.14  Other electrical / electronical components

Other electrical / electronical components

Our products

Product category: Flow sensors

Combination-Drip-Detect-Liquid-Level-Sensor

Introtek has combined two critical features in one non-invasive, sleek, compact sensor design. Our latest drip chamber sensor reliably measures liquid level while monitoring the instantaneous drip rate for each drop of liquid inside the drip chamber This combination sensor can be customized for use with a variety of clear drip chambers.

KEY HIGHLIGHTS
  • Sleek non-invasive design package provides compact and cost effective solution.
  • Integrated Electronics.
  • Accurately outputs optical pulse for each drop during IV infusion.
  • Single point liquid level measuring capability.
  • High noise immunity to EMI and RFI.
  • Lower power consumption.
  • Can be customized for various applications.
APPLICATIONS
  • IV Infusion Administration System.
  • Liquid Dispensing.
  • Pharmaceutical manufacturing.
  • Clinical laboratory.

More Less

Product category: Flow sensors

Intro Flow Sensor

Introtek’s IntroFlow™ non-invasive flow detection devices incorporate the latest ultrasonic technology for flow measurement. The non-invasive concept provides a platform for non-contact measurement where safety, hygiene and cleaning are of concern. This free-entry sensor is designed for easy tube installation and can be accommodated for various tube sizes. Fully integrated electronics yield the smallest footprint with simple interface to medical and industrial applications. The standard configuration outputs a voltage frequency that is proportional to liquid flow velocity. Absent tube and air detection are fault outputs for added value.

OPERATING PRINCIPAL:
INTROTEK’S, IntroFlow-non-invasive flow detection devices incorporate the latest ultrasonic technology for flow measurement. The non-invasive concept provides a platform for non-contact measurement where safety, hygiene and cleaning are of concern.

KEY HIGHLIGHTS
FEATURES:
  • Non-invasive ultrasonic
  • Integrated electronics
  • Dry coupled
  • Compact, free-entry design
  • Low cost
  • Low power consumption
  • High EMI and RFI noise immunity
OPTIONS:
  • Wide range of tubing sizes (custom prototypes)
  • Custom configurations & options available upon request
APPLICATIONS
  • Medical technology
  • Bio-pharmaceutical industry
  • Liquid dispensing
  • Food & beverage industry
  • Fluid handling & process technology

More Less

Product category: Flow sensors

Custom-Air-Bubble-Detector

Introtek’s ultrasonic free entry, non-invasive air bubble & air-in-line detectors can be customized for almost any customer specific application. Various geometrical and performance options can modified to meet any specification. The micro-controller based circuitry is located integrally in the sensor assembly. Custom algorithms to control functionality, such as response times, time delays and more can be designed at Introtek based on customer requirements.

KEY HIGHLIGHTS
  • Compact, non-invasive design features integral MEC circuitry
  • Programmable micro-controller expands the circuit’s functionality
  • Air detection threshold or bubble size can be set to our customer’s requirements
  • Accommodates a wide range of tubing sizes
  • High noise immunity to EMI and RFI
  • Lower power consumption
  • Output options available

APPLICATIONS
  • Patient-connected medical devices, including:
  • Apheresis • Heart-lung bypass
  • Auto-transfusion • Dialysis
  • Infusion pumps • Cardiac assist pumps
  • Perfusion-based “life support” devices
  • Chromatography and separations technology
  • Immunoassay and diagnostic equipment
  • Liquid and chemical dispensing
  • Blood processing equipment

More Less

Product category: Flow sensors

DDS—Drip-Detect-Sensor

Introtek’s optical technology, non-invasive designed sensor measures the instantaneous drip rate by accurately outputting a pulse for each drop of liquid. The Drip Detect Sensor can be customized & designed to fit any clear drip chamber. This sleek, noninvasive designed sensor outputs a pulse for each drop of liquid accurately and dependably, thereby eliminating the need for time-consuming, visual drip count monitoring at patient site for flow rate.

KEY HIGHLIGHTS
  • Sleek non-invasive design package provides compact and cost effective solution.
  • Integrated Electronics.
  • Finger grips provide an easy, self-clamping attachment and removal from drip chamber.
  • Accurately outputs optical pulse for each drop during IV infusion.
  • High noise immunity to EMI and RFI.
  • Lower power consumption.
  • Can be customized for various applications.
APPLICATIONS
  • V Infusion Administration System
  • Liquid Dispensing
  • Pharmaceutical manufacturing
  • Clinical laboratory
The DDS can be customized & modified for industrial use where remote monitoring of oil and other lubrication media flow in automation and Agricultural industrial equipment are paramount.

More Less

Product category: Flow sensors

CLD – Continuous Liquid Level Detector

INTROTEK® Non- Invasive Continuous Level Detector (CLD) is available in a standard configuration (pictured at above), as well as customized designs to meet customer application requirements. The unique pulsed, non-invasive design enables the liquid level from the bottom of a plastic vial, container or tank to be monitored quickly, accurately and dependably. The CLD is scalable for small to large plastic containers and vessels for medical, industrial, pharmaceutical, laboratory, and food & beverage applications.

Operating Principle
Introtek’s patented pulse-type ultrasonic technology provides highly reliable, non-invasive liquid level or air detection capabilities in the most critical applications where patient or process safety is mandatory. Many of the variables which affect the accuracy of amplitude based or continuous-wave ultrasound are greatly reduced if not eliminated by pulse-type technology.

Features
  • Dry coupled; no coupling gel required
  • Provides constant analog signal depicting precise liquid level
  • Simple uni-body construction with no moving parts
  • Factory-calibrated to the specific vessel and maintenance-free
  • High noise immunity to EMI and RFI
Options
  • Sensor may be programmed for custom full scale output voltages, offsets and logic thresholds
  • Custom timing and averaging available
  • Custom OEM designs
Applications
  • Liquid Level Detection with a continuous analog output signal.In addition to a wide array of uses within medical-related equipment, the CLD is utilized to improve processes for the following applications:
• Industrial
• Liquid dispensing
• Reagent production
• Pharmaceutical manufacturing
• Clinical laboratory
• Food & beverage production

More Less

Product category: Other components, modules, OEM equipment

PAD – Point Air Detector

INTROTEK® Non- Invasive, PAD Point-Air Detection, delivers a reflective ultrasonic signal from a single contact point. The ultimate air detection sensor for a fluid-handling cassette application. The PAD Sensor incorporate the state-of-the-art, patented pulse-type ultrasonic circuitry. Integral to the sensor’s assembly, the Micro-Electronic Controller (MEC) features programmable algorithms for functionality control. Response times, time delays, and other functions are programmed in accordance to specific requirements.

Operating Principle
Introtek’s patented pulse-type ultrasonic technology provides highly reliable, non-invasive air bubble detection capabilities in the most critical applications where the safety of a patient or process is mandatory. Many of the variables, which can affect performance of amplitude or continuous wave based sensing systems, are eliminated or greatly reduced, thus yielding accurate and repeatable detection.

Features
  • Compact design features integral MEC circuitry
  • Programmable micro-controller expands the circuits functionality
  • High EMI and RFI noise immunity
  • Reliable pulse-type, non-invasive ultrasound
  • Air detection threshold or bubble size can be set to our customer’s requirements
  • Accommodates a wide range of disposable cassette assemblies that incorporate fluidic channels
  • Dry coupled; no coupling gel is required
  • Accuracy is not affected by fluid or tubing color
Options
  • Reverse output logic
  • Custom OEM designs
  • Custom response times
  • Dual redundant operations
Applications
  • Air bubble, Air-in-line and liquid level sensing
  • Patient-connected medical devices, including:
• Apheresis
• Heart-lung bypass
• Auto-transfusion
• Dialysis
• Infusion pumps
• Cardiac assist pumps
• Perfusion-based “life support” devices

  • Chromatography and separations technology
  • Immunoassay and diagnostic equipment
  • Liquid and chemical dispensing
  • Blood processing equipment

More Less

Product category: Other components, modules, OEM equipment

BC1- Miniature Blood Component Detector

INTROTEK® Introtek BC1 miniaturized Blood Component Detector performs optical-based detection non-invasively for fluid within clear tubing for many critical processes.Unwanted elements in fluid can be detected in order to ensure the safety of a procedure or process. The Blood Component Detector is available in several configurations. These configurations support different interfaces and are considerations based on the intent or type of design integration. Configurations options are link to PDF Instruction Manual.

Operating Principle
INTROTEK optical sensors with INTROTEK microcontroller-based circuitry are designed to perform blood detection in clear tubing in a variety of critical applications such as Hemodialysis, where it is desirable to detect blood leaking through a membrane in medical applications.

Features
  • Non-invasive optical technology
  • Compact, free-entry design
  • Low power consumption
  • Field calibratable
  • Wide range of tubing sizes
  • Integratable electronics
  • Remote Electronics or Chip Integration options
Options
  • Programmable electronics available
  • Custom-engineered OEM designs
  • 1/4 “ and 1/8 “ OD current standard sensor housing slot sizes
  • Alternative slot sizes available (subject to engineering evaluation)
  • Field-programmable blood level threshold
  • Chip integration package available
Applications
  • Blood leak detection/dialysis
  • Blood component vs Saline
  • Blood processing devices
  • Contamination of fluids
  • Hemodialysis

More Less

Product category: Flow sensors

MABS – Miniature Air Bubble Sensor

INTROTEK® Non-invasive Mini Air Bubble, Air-in-line sensors, incorporate Introtek’s pulse ultrasonic technology into a very compact, free entry design. Perfect for Syringe and Infusion Pumps where space is limited. The Mini Air Bubble Detector is available with remote or integrated electronics. Chip integration, the most cost effective and elegant interface to a device is available as well. Each sensor is built to INTROTEK unsurpassed quality and is 100% factory-tested before shipment. As a value-added provider, INTROTEK will integrate special components to supply custom sensor packages.

Operating Principle
INTROTEK pulse-type ultrasound provides highly reliable, non-invasive air detection capabilities in critical applications where the safety of a patient or the integrity of a process is essential. Many of the variables which affect the accuracy of amplitude based on continuous wave ultrasound are greatly reduced, if not eliminated, by pulse-type technology.

Features
  • Non-invasive ultrasonic
  • Compact, free-entry design
  • Low cost, low power consumption
  • High EMI and RFI noise immunity
  • Wide range of tubing sizes
  • Integratable electronics
  • Chip only interface option available
Options
  • Programmable electronics available
  • Custom-engineered OEM designs
  • Premium EMI/RFI Packaging Available
  • Various Input Voltages available including 3.3 VDC
  • Chip integration package available
Applications
  • Air bubble, air-in-line and end-of-sample sensing
  • Patient-connected medical devices including :
  • Apheresis
  • Heart-lung bypass
  • Auto-transfusion
  • Dialysis
  • Infusion & Syringe pumps
  • Cardiac assist pumps
  • Chromatography and separation technologies
  • Liquid and chemical dispensing
  • Blood processing equipment
  • Immunoassay and diagnostic equipment
  • Hemodialysis

More Less

About us

Company details

INTROTEK INT’L, the Global Leader for more than 35 years, has produced non-invasive, ultrasonic air bubble detectors, continuous liquid and point level sensors, flow sensors and optical blood component detectors for the medical device, chemical processing, pharmaceutical, life sciences and food & beverage and aerospace industries. Introtek has maintained its commitment in providing safe, reliable products to ensure customer satisfaction. Our products lead the way in meeting O.E.M. customer’s needs for fully integrated sensors that are compact, accurate, highly reliable and cost effective. Whether you require standard or custom-designed sensors our comprehensive design and manufacturing capabilities—along with our solid record of O.E.M. service proficiency–will provide you with the most reliable ultrasonic-based detection products available today. Introtek is also now providing 4th edition solutions.

More Less