Camozzi Automation spa of Brescia at COMPAMED 2019 in Düsseldorf -- MEDICA - World Forum for Medicine
Premium Exhibitor

Camozzi Automation spa

Via Eritrea, 20/I, 25126 Brescia
Italy
Telephone +39 030 37921
Fax +39 030 2400464
info@camozzi.com

Hall map

COMPAMED 2019 hall map (Hall 8b): stand H02

Fairground map

COMPAMED 2019 fairground map: Hall 8b

Our range of products

Product categories

  • 01  Manufacturing of components
  • 01.02  Plastics processing
  • 01.02.01  Injection molding

Injection molding

  • 02  Manufacturing of finished products
  • 02.16  Laboratory technologies
  • 02.16.02  Laboratory automation

Laboratory automation

  • 04  Manufacturing equipment
  • 04.06  Automation, robotics

Automation, robotics

  • 04  Manufacturing equipment
  • 04.08  Dosing

Dosing

  • 05  Components, modules, OEM equipment
  • 05.02  Pneumatic actuators
  • 05  Components, modules, OEM equipment
  • 05.03  Linear technology

Linear technology

  • 05  Components, modules, OEM equipment
  • 05.07  Filters

Filters

  • 05  Components, modules, OEM equipment
  • 05.12  Tubings and tubing equipment

Tubings and tubing equipment

  • 05  Components, modules, OEM equipment
  • 05.13  Other components, modules, OEM equipment
  • 07  Microtechnology
  • 07.01  Mechatronics

Mechatronics

  • 07  Microtechnology
  • 07.07  Microfluidics

Microfluidics

Our products

Product category: Other components, modules, OEM equipment

Series PRE - Proportional pressure regulator with Coilvision technology

All data coming from the regulator can be transmitted wirelessly to the cloud, aggregated and used in order to view the operational efficiency of the regulator by means of a dashboard.

The Series PRE is available in two sizes and in different configurations, including IO-Link connectivity. As well as the standard options with and without display, there is a version with an integrated exhaust valve, which enables the system to exhaust even without a power supply.

A manifold version enables the control of several outlets with only one inlet, while a version with external sensor connections is available for applications where there is a requirement to monitor the pressure of aggressive gases or liquids. 

More Less

Product category: Valves

Series D - Valve island with Coilvision technology

CoilVision enables proactive management of performance parameters such as power consumption and coil temperature. It also transmits operational data, alarm history and health status to a PLC or through wireless LAN to an IIoT (Industrial Internet of Things) gateway and onto the Cloud.

The Series D is compact so can be used in applications with limited installation space without compromising its flow. Available in 10 mm size this product covers the needs of all industrial applications.

COILVISION technology has been developed to constantly monitor the operating parameters of the solenoid that drives the spool. Each operation of the solenoid, in different cyclic and environmental conditions, is analysed to acquire information that is processed by software algorithms to predict the health status of the component.

More Less

Product category: Pneumatic actuators

Series 23 - ISO 6432 cylinder with auto-cushioning

The new Series 23 pneumatic cylinders are based on the innovative concept of ‘auto-cushioning’ and comply with the ISO 6432 standard.

The cylinder, thanks to a patented system*, automatically adjusts the cushioning in order to provide optimal deceleration under every condition. During the entire cushioning phase, the cylinder enjoys smooth, jolt-free movement, reducing vibrations and noise, while also guaranteeing higherreliability and constant performance over time. As manual adjustments are not required, commissioning times are reduced and the cylinder is tamperproof. The cylinders are suitable for use in many industrial applications, especially where working conditions vary over time, because of changes in dimensions or due to wear of the host machine or mechanism.

Auto-cushioning system
The “auto-cushioning” system is based on the use of shaped sleeves that have a number of holes that are accurately positioned and precisely dimensioned in order to enable the system to adapt to the different combinations of speed and applied mass.

More Less

Product category: Valves

Series 3 Plug-In valve islands, Multipole and Fieldbus

Plug-In system for Series 3 solenoid valves, G1/8 port.
Valve functions: 2x3/2, 5/2 and 5/3-way CO CC CP.
Multipole with a 25-pin Sub-D connector.
It can interface with all major serial communication protocols.

  • Flexible assembly through monostable and bistable 2- and 3-position modules
  • Electrical connection and front pneumatic outputs
Available protocols:
  • PROFIBUS-DP
  • DeviceNet
  • CANopen
  • EtherNet/IP
  • EtherCAT
  • PROFINET

More Less

Product category: Valves

Series HC valve island Cabinet version

Multipole connection with 25 or 37 pins
Valve functions: 2x2/2, 2x3/2, 5/2, 5/3 CC

  • Valve flow: 400 and 700 Nl/min
  • Subbases: from 4 to 32 positions for valve size 10.5mm, from 2 to 16 positions for valve size 21mm
  • Same subbase for both sizes
  • Rear pneumatic outlets
  • Interface seal with the internal part of the Cabinet

More Less

Product category: Valves

Series F valve islands, Multipole and Fieldbus

Multipole integrated electrical connection (PNP)
Valve functions: 2x2/2; 2x3/2; 5/2; 5/3 CC
It can interface with all major serial communication protocols.

  • Valve size: 12 and 14 mm
  • Modularity: single
  • Valve positions: from 2 to 24
  • Manual override: Push or Push & Turn
Available Protocols:
  • PROFIBUS-DP
  • CANopen
  • DeviceNet
  • EtherNet/IP
  • PROFINET
  • EtherCAT

More Less

Product category: Valves

Series HN valve islands, Multipole and Fieldbus

Multipole connection with 25 or 37 pins
Serial connection with the most common communication protocols
Valve functions: 2x2/2; 2x3/2; 5/2; 5/3 CC

  • Valve flow: 400 and 850 Nl/min
  • Modular subbases: 2 positions for valve size 10.5mm, single position for valve size 21mm
  • Subbases for monostable and bistable valves (size 10.5mm)
Protocols available:
  • PROFIBUS-DP
  • CANopen
  • DeviceNet
  • EtherNet/IP
  • PROFINET
  • EtherCAT

More Less

Product category: Valves

Series CX multi-serial module

Interface with: PROFIBUS, CANopen, DeviceNet, EtherNet/IP, PROFINET,
EtherCAT
Compatible with all Camozzi valve islands

  • Maximum flexibility in use
  • Mounting in hard application conditions
  • Easily changeable
  • Analog I/O modules
  • Digital I/O modules
  • Multi-communication protocols

More Less

About us

Company details

Camozzi Automation’s offering includes ever more IIoT products and solutions. We work on both the digitalisation of production processes and the creation of real cyber-physical systems, to enable the integration of mechanical, electronic and digital elements, constantly improving process performance and the management of the data chain.

NUMBERS

  • 25 Subsidiaries and service centres
  • 50 Exclusive distributors
  • 7 Production sites
  • 1.700 Employees

SECTORS

Industrial automation
  • Packaging
  • Food & beverage
  • Plastic & Rubber
  • Fluid Control
  • Automotive
  • Electronic System
  • Textile Machinery
  • Assembly & Robotics
  • Printing & Paper
  • Woodworking Machinery
Life science
  • Medical
  • Analytical
Transportation
  • Rail
  • Off Road
  • Commercial Vehicles
  • Passenger Car

More Less