TECHNOLOGIE MEDICALE S.A.S. of Noisy-le-Sec at MEDICA 2018 in Düsseldorf -- MEDICA - World Forum for Medicine

TECHNOLOGIE MEDICALE S.A.S.

P.O. Box 46, 93130 Noisy-le-Sec
101, rue Vaillant Couturier, 93130 Noisy-le-Sec
France
Telephone +33 1 48455895
Fax +33 1 49429021
info@technologiemedicale.com

Hall map

MEDICA 2018 hall map (Hall 11): stand E40

Fairground map

MEDICA 2018 fairground map: Hall 11

Contact

SERGE ITZKOWITCH

Phone
33148455895

Email
s.itzkowitch@technologiemedicale.com

ALEXANDRE ITZKOWITCH

Phone
33148455895

Email
a.itzkowitch@technologiemedicale.com

Our range of products

Product categories

  • 01  Electromedical Equipment / Medical Technology
  • 01.06  Intense medicine / anesthesiology / respiration
  • 01.06.02  Respiration equipment, oxygen equipment
  • 01  Electromedical Equipment / Medical Technology
  • 01.06  Intense medicine / anesthesiology / respiration
  • 01.06.07  Other equipment for intense medicine / anesthesiology / respiration

Other equipment for intense medicine / anesthesiology / respiration

  • 01  Electromedical Equipment / Medical Technology
  • 01.07  Emergency medicine, rescue equipment
  • 01.07.03  First-aid equipment
  • 01  Electromedical Equipment / Medical Technology
  • 01.07  Emergency medicine, rescue equipment
  • 01.07.05  Other rescue equipment

Other rescue equipment

  • 01  Electromedical Equipment / Medical Technology
  • 01.08  Operating technology and operating equipment
  • 01.08.01  Surgery room equipment
  • 01  Electromedical Equipment / Medical Technology
  • 01.09  Hospital equipment, care equipment
  • 01.09.01  Patient room furniture, patient room equipment

Patient room furniture, patient room equipment

  • 01  Electromedical Equipment / Medical Technology
  • 01.09  Hospital equipment, care equipment
  • 01.09.05  Treatment and recovery room equipment, intensive care units

Treatment and recovery room equipment, intensive care units

  • 01  Electromedical Equipment / Medical Technology
  • 01.09  Hospital equipment, care equipment
  • 01.09.08  Neonatal care equipment

Neonatal care equipment

Our products

Product category: Respiration equipment, oxygen equipment

FLOWMETER WITH PRE-ADJUSTED FLOWRATES

DEBFLO and DEBPLUS are flowmeters with pre-adjusted flowrates used to set the flow of a gas that is to be delivered to patients through the respiratory tract. It should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system.

More Less

Product category: Respiration equipment, oxygen equipment

FLOWMETER WITH FLOATING BALL

RTM3 flowmeter with floating ball is used to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract. It should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system. It must be fitted at its outlet either with a humidifier/nebulizer or with an outlet tubing nipple.

More Less

Product category: Surgery room equipment

VACUUM REGULATOR

The vacuum regulator is used to measure and to adjust the vacuum level within the context of surgical and medical suctions.

More Less

Product category: Surgery room equipment

EJECTOR

The VENTURI TM2 ejector is used to create, to adjust and to measure a suction from a source of pressured gas on the wall or from a cylinder (oxygen or medical air).
It enables to suck in liquids or mucus in the absence of vacuum pipeline network. The VENTURI TM2 ejector should be connected either to a source of pressured gas on the wall, using a direct probe or a rail mounting system, or to a cylinder through a pressure regulator fitted with a quick-release connector. The VENTURI TM2 ejector should be associated with a collection jar and a suction hose.

More Less

Product category: Respiration equipment, oxygen equipment

PRESSURE REGULATOR WITH FLOWMETER WITH PRE-ADJUSTED FLOWRATES

The REGSON TM2 pressure regulator with flowmeter with pre-adjusted flowrates is connected to an Oxygen or medical Air cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure.
The pressure of the compressed gas cylinder can be read on the pressure gauge of the device.
Combined with a DEBSON TM2 flowmeter with pre-adjusted flowrates, it enables to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract from a gas cylinder.
Fitted with a quick-release connector it also enables to supply a ventilator or any other medical device with gas.
Two connection systems to the gas cylinder are available:
- the bullnose fitting, for large cylinders (more than 4 liters in water or 0.8 m3).
- the yoke pin-index fitting, for small cylinders (universal system).

More Less

Product category: Respiration equipment, oxygen equipment

PRESSURE REGULATOR WITH FLOWMETER WITH FLOATING BALL

The REGFLOW TM pressure regulator with flowmeter with floating ball is connected to an Oxygen or medical Air cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure.
The pressure of the compressed gas cylinder can be read on the pressure gauge of the device.
Combined with a RTM3 flowmeter with floating ball, it enables to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract from a gas cylinder.
Fitted with a quick-release connector it also enables to supply a ventilator or any other medical device with gas.
Two connection systems to the gas cylinder are available:
- the bullnose fitting, for large cylinders (more than 4 liters in water or 0.8 m3).
- the yoke pin-index fitting, for small cylinders (universal system).

More Less

Product category: Surgery room equipment

COLLECTION JARS

The collection jars are used to collect liquids or mucous resulting from medical suction. They can be used in conjunction with any suction devices. 

More Less

Product category: Neonatal care equipment

LOW FLOW AIR - O2 BLENDER

BLENDER TM is a medical device used to provide a mix of O2 and medical AIR to the patient (FiO2). It is intended to adjust the concentration of Oxygen (from 21 to 100%) in medical AIR. It is provided with two outlets to connect a 5 l/min flowmeter and a 15 l/min flowmeter. It is connected to sources of pressurized gas on the wall or to pressure regulators' quick-release connectors using two hosepipes medical AIR and O2.
BLENDER TM is mainly intended for paediatric and neonatalogy low flow applications.

More Less

Product category: Patient room furniture, patient room equipment

MEDICAL RAIL

Wall medical rail

More Less

Product category: Patient room furniture, patient room equipment

SHELF

FOLDING SHELF

More Less

Product category: First-aid equipment

FLOWMETER WITH PRE-ADJUSTED FLOWRATES

The DEBSON TM2 flowmeter with pre-adjusted flowrates is used to set the flow of a gas that is to be delivered to patients through the respiratory tract. It is a flowmeter with pre-adjusted flowrates which basic principle lies in the variation of the flow-holes diameter. The DEBSON TM2 should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system. It must be fitted at its outlet either with a humidifier/nebulizer or with an outlet tubing nipple.
Used in ambulances.

More Less

Product category: Other equipment for intense medicine / anesthesiology / respiration

HOSEPIPES FOR MEDICAL GASES

The hosepipes are used as extensions to supply any device or machine with medical gases delivered from a standardized outlet.

More Less

About us

Company details

TECHNOLOGIE MEDICALE S.A.S.
101 rue Vaillant Couturier, P.O. Box 46, 93130 Noisy-Le-Sec (France) Tel +33 1 48455895, Fax +33 1 49429021
email: info@technologiemedicale.com
website: www.technologiemedicale.com

Company: French manufacturer of O₂ therapy and suction equipment for gas pipeline systems, wall rails and rail accessories. Established since 1980.

Main products: flowmeters and pressure regulators (with pre-adjusted flows and standard type); humidifiers; suction controllers (analog; digital); injectors (analog; digital); collection jars; suction trolleys; wall rails; baskets; shelves; drawer units; catheter holders; drip stands; wall arm hooks; medical gas connectors.

More Less