Prolinx GmbH of Düsseldorf at MEDICA 2018 in Düsseldorf -- MEDICA - World Forum for Medicine

Prolinx GmbH

Brehmstr. 56, 40239 Düsseldorf
Germany
Telephone +49 211 31054698
Fax +49 2131 40519689
info@prolinx.de

This company is main exhibitor of

Hall map

MEDICA 2018 hall map (Hall 5): stand C04

Fairground map

MEDICA 2018 fairground map: Hall 5

Our range of products

Product categories

  • 07  Medical Services and Publications
  • 07.16  Certification and testing of medical devices, quality assurance

Certification and testing of medical devices, quality assurance

Our products

Product category: Certification and testing of medical devices, quality assurance

Product Registration

Who should apply/register with the Competent Authority?

The EEA Competent Authorities usually charge fees for the registration/notification.

For General Medical Devices:
You must register with the Competent Authority in an EEA Member State in which you have your registered place of business if you:manufacture class I or custom made devices and place them on the market under your own name, or trading name(s); fully refurbish class I devices, or label one or more readymade devices, with a view to placing them on the market under your own name; place devices bearing the CE marking on the market, under your own namein a system or a procedure pack within their intended purposes and within the limits of uses specified by their original manufacturers; sterilise, for thepurpose of placing on the market under your own name, systems or procedure packs or other CE marked medical devices designed by the manufacturer to be sterilised before use; are the authorised representative of a manufacturer who does not have a registered place of business in the EEA.

If you do not have a registered place of business in the EEA Member State you must designate an authorised representative established in the EEA to act on your behalf.

Custom Made Devices mean devices manufactured in accordance with a professional's written prescription for the sole use of a particular patient and are not adapted from mass produced items.

For In Vitro Diagnostic Medical Devices (IVDs):
You must register with one Competent Authority in a Member State in which you
have your registered place of business if you: manufacture in vitro diagnostic medical devices (IVDs) and place them on the market under your own name, or trading name(s); manufacture IVDs for performance evaluation and make them available under your own name, or trading name(s); are the authorised representative of a manufacturer who does not have a registered place of business in the Community.

If you do not have a registered place of business in a Member State and you wish to place IVDs on the European market then you must designate a person established in the Community to act on your behalf as your Authorised Representative.

For Active Implantable Medical Devices
Directive 2007/47/EC amends the Active Implantable Medical Devices Directive 90/385/EC and came into force on 21 December 2008. One change to the directive especially affects persons responsible for placing and putting into service custom made active implantable medical device(s) on the EU market.

Article 1.11 of Directive 2007/47/EC amends Article 10 of Directive 90/385/EC to include a requirement for manufacturers of custom made active implantable medical devices to provide the Competent Authority of the member state in which they have their registered place of business details of their address, a description of the device(s) concerned, the product labelling and the instructions for use.

 Why must I inform/notify/register with the Competent Authority?
Legal basis: All the three EU directives concerning medical devices, i.e., the Medical Devices Directive (MDD 93/42/EEC amended by 2007/47/EC)*, In Vitro Diagnostic Device Directive (IVDD 98/79/EC)**, and Active Implantable Medical Devices Directive (AIMDD 90/385/EC) *** require manufacturers or, their authorised representatives or others placing medical device(s) on the EEA market, to provide certain information to the Competent Authorities in the EEA Member State where they have a registered place of business.
*
Article 14 of Directive MDD 93/42/EEC amended by 2007/47/EC;
**
Article 10 of Directive IVDD 98/79/EC;
*** Article 10 of Directive AIMDD 90/385/EC.

These requirements have been transposed into national laws of the EEA Member States. In UK, the national law isMedical Device Regulations 2002: Regulations 19 and 44 registration of persons placing general medical devices and/or in vitro diagnostic medical devices on the market.

After the receipt of the notification/registration, the Competent Authorities shall process the data and inform the Commission of the European Communities and the other States Party to the Agreement on the European Economic Area, upon request.

What about changes to registered details?
After the product registration or notification, the manufacturer or its authorised representative must inform the Competent Authority about any changes or additions to the registered details.
Additionally, the Competent Authority will regularly review the records and request updating/confirmation of the registered information. The EEACompetent Authorities usually charge a fee for the product updating (change of registration).

Change Of Circumstance (COC)
In case of change of circumstance, the MHRA will establish whether the allocation of a new registration number is appropriate any registration where there has been a change of company name, or become a limited company; the manufacturer must provide written confirmation stating whether there has been/has not been a change in the legal entity of the business, e.g. enough changes to the operations/structure of the company, as to be wholly different to the previous registration.

Role of European Authorised Representative (Authorized Representative) in MHRA registration
Any manufacturer based outside the European Economic Area (EEA) (EU + EFTA excluding Switzerland) must designate an Authorised Representative (Authorized Representative) (AR). The appointed AR must file the required registration with the competent authority MHRA on behalf of the non-EEA manufacturer. When submit the registration with MHRA, the appointed AR must provide written evidence that they are acting with the consent of a manufacturer located outside the EEA. This may take the form of a Letter Of Designation or contract from the non-EEA manufacturer.

The letter should state the full name and address of the AR and that they are the designated EU authorised representative based within the UK, under the MDD 93/42EC. In the case of a notification/registration for an in vitro diagnostic device please quote the Directive IVDD 98/79EC.

In the case of an overseas manufacturer employing a new AR; the UK competent authority Medicines & Healthcare products Regulatory Agency (MHRA) will require a copy of the letter from the
non-EEA manufacturer, to the old AR terminating their services, and the date the service/contact is due to end.

As of 21 March 2010, a Single EU/EC European Authorised/Authorized Representative must be designated by a non-EU manufacturer of medical devices as required by Article 14.2* of Council Directive 93/42/EEC amended by Directive 2007/47/EC.

*Article 14.2 of Council Directive 93/42/EEC as amended by Directive 2007/47/EC:
Where a manufacturer who places a device on the market under his own name does not have a registered
place of business in a Member State, he shall designate a single authorised representative in the European Union. For devices referred to in the first subparagraph of paragraph 1, the authorised representative shall
inform the competent authority of the Member State in which he has his registered place of business of the details referred to in paragraph 1.

Which category does an In Vitro Diagnostic Medical Device (IVD) fall into?
The IVD Directive (98/79/EC) groups IVDs into four categories. These categories are, in order of increasing perceived risk:

Other/General Device: all devices except Annex II and self-testing devices;
Device for Self-Testing (not listed in Annex II): a device intended by the manufacturer to be able to be used by lay persons in a home environment, excluding self-test devices covered in Annex II;
Device of List B, Annex II of the Directive: which, amongst others, includes reagents and products for rubella, toxoplasmosis and phenylketonuria as well as devices for self testing for blood sugar;
Device of List A, Annex II of the Directive: which includes reagents and products for human immunodeficiency virus I and II, hepatitis B, C and D.


Which classification does a Medical Device (MD) fall into?
A medical device (MD) may be classified as Class I (including Is & Im), Class IIa, IIb and III, with
Class III covering the highest risk products. The higher the classification the greater the level of assessment required. All Class Is, Im, IIa, IIband III medical devices require the intervention of
third party: the so-called Notified Body.

The classification rules are set out in Annex IX of the directive. This annex includes definitions of the
terminology used in the classification rules. Classification of a medical device will depend up on a series of factors, including:

how long the device is intended to be in continuous use whether or not the device is invasive or surgically invasive, whether the device is implantable or active whether or not the device contains a substance, which in its own right is considered to be a medicinal substance and has action ancillary to that of thedevice.

It is usually the Intended Purpose for Use that determines the class of the medical device and not the particular technical characteristics of the device.

It is the Intended Purpose for Use, assigned by the manufacturer to the device, that determines the class of the medical device and not the class assigned to other similar products manufactured by the same manufacturer or different manufacturers. For instance, two sutures that have the same composition may well have different Intended Purpose.

A manufacturer may successfully avoid the particular higher classification by clearly define on the labelling the Intended Purpose in such a way that the device falls into the lower class!

For more information click on the link.

More Less

About us

Company details

 Your Anchor Point in Germany!

Eulinx Consulting helps worldwide exporters to gain global market access. Eulinx Consulting is an industry leading consultancy company specialised in Business Services and  Regulatory Affairs such as: Authorised European Representative and CE Marking. A world-leading consultancy offers you excellent services at competitive prices! 

Authorised European Representative 
 
Eulinx Consulting offer you as an EU authorised representative with following services:

  1. Product Registration: We can register your product in EU for the first time and get your product a Certificate of Registration.
  2. Renewal and Update Product Registration: The product Certificate of Registration is valid for one year only and must be renewed annually. The information about the product must be updated whenever it changes and at leastonce a year when renew the product Certificate of Registration.
  3. Keep Your Technical Files: We store and update the Technical Files of your products sold in Europe, and makes them available timely to the appropriate surveillance/vigilance authorities upon request.
  4. Legislation Monitoring: We monitor and report on new developments in European product legislation relevant to your products.
  5. Vigilance and Incident Reporting: We assist with product vigilance and incident reporting.

Business Services

We know that start-up companies need to stay flexible and keep overheads low in order to succeed. Eulinx offers you tailor made business services:                                                                                                  

Setting up your business in Germany:

If you are a foreign investor and wish to consider German company formation, we offer you a broad spectrum of options.

Serviced Offices:

Telephone answering and forwarding, fax forwarding and messaging, using your company's name
Reception facilities
Meeting and conference facilities
Secretarial assistance
 
Please contact us so that our team can start helping you today!

More Less