The third source are devices able to decompress the gas contained in the medical gas cylinders (or cylinder bundles) and make it available to the correct distribution pressure as determined in accordance with EN ISO 7396-1.
In the single-stage configuration the gas from pressurized containers is decompressed in the gearbox and sent directly to the line.
In the two-stage configuration downstream of the first gear decompression, are present secondary reducers or second stage, which usually decrease the pressure to values lower than those used in the single stage configuration.
EN ISO 10524-2 UNI EN ISO 7396-1 UNI EN ISO 15001 Materials used
Brass alloy with high tensile strength CW614N plated surface of high density polymers (subject to patent) and stainless steel. Cash available
Product category: Anesthesiology equipment, anesthesiology systems
Automatic decompression unit
The automatic change over manifold is suitable for reduction and interception of the gas normally used in the laboratory. The device guarantees the real autonomy, totally independent from the human intervention.
The central decompression unit ensures a stable flow able to satisfy most of the needs of the project, ensuring a flow not less than 20 Nm ³ / h @ 800 kPa.
The quality of the components is guaranteed by careful controls in phase of acceptance and is guaranteed by compliance with company procedures reffered to the UNI EN ISO 9001: 2008.
Components and materials
n° 2 pressure reducers single stage. Bellows, Stainless Steel for Hydrogen and Acetylene n° 2 shut-off valves for A.P. n° 2 purge valves n° 2 gauges H.P. (Ø 52 mm, class 1.6) n° 2 gauge L.P. (Ø 52 mm, class 1.6)
Chrome plated brass body regulator with high thickness Framework support in stainless steel
DZ MEDICAL born from the experience of forty years dedicated to the manufacture of medical devices, in the last periods develops the use of technologies with low environmental impact.
The attention to the use of innovative materials and new technology solutions, has made the company an international leader in the manufacture of Medical and Technical Devices, especially in ones dedicated to the reduction and control of pressure.
Our production is divided today into two main areas, once fully dedicated to the machining and the other dedicated to the assembly, testing and certification of the devices .
The products are successfully used wherever it is needed precision, reliability and quality; our products are in conformity with Directive 93/42 EEC (and subsequent amendments) .
Our company is also one of the founding members of the association "AIIGM" (Italian Association of Medical Gas Plant devices) that was born in 2010 at the behest of twelve Companies (Founders) operating in the healthcare's market.