Plan 1 Health srl of Amaro (UD) at MEDICA 2017 in Düsseldorf -- MEDICA Trade Fair

Plan 1 Health srl

Via Solari 5, 33020 Amaro (UD)
Italy

Telephone +39 0433 468376
Fax +39 0433 468383
info@p1h.it

This company is co-exhibitor of
SURGIKA Srl.

Hall map

MEDICA 2017 hall map (Hall 5): stand E19

Fairground map

MEDICA 2017 fairground map: Hall 5

Our range of products

Product categories

  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.02  Surgical instruments and products

Surgical instruments and products

Our products

Product category: Surgical instruments and products

HEALTHPORT

The intracorporeal access system Healthport is the result of the effort of Plan 1 Health during 20 years of constant technical development.

SAFE: high quality materials and accurate design assure maximum reliability. Robust chambers are leak proof; on all the chamber models the inner reservoir is made of Titanium, ensuring the highest drug compatibility and indeteriorability

SIMPLE: catheter connection can easily be done in few seconds; chamber shapes allow an easy introduction into the underskin pocket

VERSATILE: the wide choice of chamber models and catheters sizes make the Healthport system adequate to the expectations of all patients, users and to the clinical requirements.

The Healthport system is marketed by Baxter Healthcare with its own brand name. In some countries it is distributed under P1H name by local distributors.

More Less

Product category: Surgical instruments and products

PAINFUSOR

The PAINfusor catheter for the continuous wound infusion is a result of Plan 1 Health’s R&D and its co-operation with Baxter.

This device is indicated for the continuous administration of local anaesthetic drugs into the surgical wound to manage acute post-operative pain.

The catheter is designed to be partially implanted up to 5 days and to be connected with an elastomeric or electronic pump.
PAINfusor catheter has a fenestrated length (from 2,5cm to 30cm in 5 different versions) and its special design allows the fluid to be uniformly distributed; the analgesic effect in the wound is in this way optimally delivered.

More Less

Product category: Surgical instruments and products

HEALTHPICC

Healthpicc leverages the two decade experience of Plan 1 Health in the development and manufacturing of Central Venous Catheters CVC.

It is an innovative product, made of the best materials to ensure a “Power” infusion at high flow rates even for the smaller diameters.

The standard package includes components of the highest quality for the most recent implant procedures, it is also compatible with the ECG technique for the tip positioning.

More Less

Product category: Surgical instruments and products

GTB

From the osteointegrated implant system to the biologically integrated implant system: the GTB implant system is the future in implantology.

After having focused almost exclusively on the concept of osteointegration, the maintenance of perimplant bone tissue, especially at the crestal level, has developed, while improving the functionality of the implant system under load, i.e. the biomechanics of the implant. The implant operation after osteointegration has been given the right value and the function of the coupling between implant and abutment and of the prosthetic component have been studied more deeply.

The optimal result is achieved, however, only if they are simultaneously present the key elements that affect the behavior under load of both bone and implant-abutment.

More Less

Product category: Surgical instruments and products

EASY

A proven implant design that is synonymous of easy positioning and certainty of outcome.
The EASY implant system with conical core and cylindrical thread profile follows a standard widely used for over twenty years covered by a clinical protocol universally known.

The deep inner connection with anti-rotational hexagon index ensures the stability of the prosthetic abutments.
The technical specification of the implant screw and of the prosthetic components and surgical instruments make the EASY system simple to use, both for the dental clinic and for the laboratory.

The implant screws with cylindrical thread profile find a good primary stability in all bone qualities.
The self-tapering geometry allows you not to tap in most situations. Accuracy and reliability: the parts are manufactured with very tight production tolerances and ensure maximum precision in pairs, resulting in a reliability of the product and high rates of long-term success.

An implant system constantly updated at the prosthetic components to meet the requirements of modern implantology and restorative: from single tooth to full mouth restoration.

The prosthetic components are characterized by the precision of the pairs, the width of the range offered and the simplicity of their use for both the dental clinic for the laboratory. Traditional products such as MUA, overdenture abutment and castable abutment, offer flexible and cost-competitive solutions.

In case of single tooth restoration you have the possibility of using traditional solutions such as personalized titanium abutments or individualized by casting with gold alloy base up to the most current CAD-CAM methods for the construction of prosthetic with high aesthetic value.
With twenty years of experience in implant surfaces Plan 1 Health offers a double treatment characterized by OsseoGRIP treatment on the coronal portion of implant and the rest covered with Ti cp Plasma Spray, in order to preserve the crestal bone and the need for both primary and high stability in mature bone in case of immediate post-extraction protocols.

More Less

About us

Company details

Plan 1 Health’s facilities are located in the industrial area of Amaro (UD), close to the A23 highway exit “Carnia-Tolmezzo”.

The plant covers an area of over 800 square meters and it includes the operational and administrative headquarter, warehouses of semi-finished and finished products, a ISO Class7, 80 square meter Clean Room, a laboratory for surface treatments, a dedicated production area for quality inspections, assembly, packaging and labelling.

The plant has been specially designed for the operations of Plan 1 Health, the flow of materials is optimized for managing the batch traceability throughout the production process.

More Less