ENRICO BRUNO SRL of Torino at MEDICA 2017 in Düsseldorf -- MEDICA Trade Fair
Manufacturers

ENRICO BRUNO SRL

Via Duino 140, 10127 Torino
Italy

Telephone +39 011 3160808
Fax +39 011 3160753
acquisti@enrico-bruno.it

This company is co-exhibitor of
PIEMONTE Agency for Investments, Export and Tourism / Centro Estero per l'Internazionalizzazione s.c.p.a.

Hall map

MEDICA 2017 hall map (Hall 16): stand A67

Fairground map

MEDICA 2017 fairground map: Hall 16

Our products

Product category: Incubators

TSF 58 DG Thermostatic incubator forced air circulation

Our thermostatic incubators may be employed in different applications as, for example, for microbiological incubations, thermal tests on materials (to verify resistance or deformations), or for any other work needing a uniform and careful warming process.

Key Features
  • Full stainless steel construction: internal walls AISI 430, external structure AISI 304 “Scotch Brite”, allows maximum corrosion resistance and easy cleaning
  • Internal chamber with laminar air circulation and uniform warmth distribution offered by two lateral convection ducts with perforated walls and by resistors position in pre-warming chamber
  • Motor with fan for air circulation fixed in lateral position, allows an horizontal and diagonal air flow among all the volume of the chamber
  • Thermal insulation by high quality mineral fiber in adequate thickness
  • Double kind front door (one in this model), external stainless steel with thermal insulation, internal tempered glass to allow visual inspections without thermal modifications
  • Perforated stainless steel AISI 430 shelves, extractable and fixable on different heights
  • By pass duct for introduction of monitoring thermometric probes
  • Rubber antiskid feet adjustable in height
Standard thermal equipment
  • Digital P.I.D controller with autotuning. PT100 probe
  • Temperature range: from + 5°C beyond ambient up to + 80°C
  • Visualized resolution: three digits (0,1°C), double display (set point, measured temperature)
  • Double overtemperature protection system:
    - Safety device with adjustable entry point related to set point (fixed 1,5°C beyond set point), in case of default of the main digital controller, with visual alarm
    - Safety independent adjustable thermal controller (class 3.1 – DIN 12880), is activated in case of default of the main digital controller or of the main probe, with visual alarm
  • Temperature uniformity in the chamber: ± 0,4°C at 37°C
  • Thermal Accuracy (time): ± 0,2°C at 37°C
  • Manufactured in compliance with Directions of the European Council 2006/42/CE (Machinery), 2006/95/CE (Low Voltage), 2004/108/CE (Electromagnetic Compatibility EMC), norms EN 61010-1:(2001).

On request:
  • Factory temperature calibration certificate (standard 1 measure for 3 points in the chamber)
  • Serial interface RS485 – RS232
  • Management software (reporting, graphics, alarms, running process visualization)
  • 4 wheels kit for floor stand (n.2 with brake)

More Less

Product category: Analyser appliances

BS 6 DG Thermostatic bath, digital P.I.D. controller

Our thermostatic baths may be employed in different applications as, for example, for thermal precision tests on samples in water immersion, for quick defreezing of liquid samples, or for any other work needing a uniform, speedy and careful warming process.

Key Features
  • Full stainless steel AISI 304 construction, allows maximum corrosion resistance and easy cleaning .
  • Pressed tank with round corners to assure the maximum hygiene and easy cleaning
  • Insulated chamber between the tank and the external stainless steel walls (insulation by high quality mineral fiber), to assure a true thermal insulation, to avoid useless leakage of electric power and to reproduce isothermal conditions within all the tank.
  • Half circular armoured resistors placed to cover all the tank’s bottom area, to allow the maximum thermal uniformity, with perforated covering false bottom.
  • Temperature probe fixed within the tank, to provide for the most exact water temperature reading.
  • Equipped with water tap to allow complete water drain.
  • Rubber antiskid feet adjustable in height.
Standard thermal equipment
  • Digital P.I.D. controller with autotuning, NTC probe
  • Temperature range: from + 5°C above ambient up to boiling water (cover is needed in this case)
  • Visualized resolution: three digits (0,1°C), double display (set point, measured temperature)
  • Double over temperature protection system:
    a) Safety independent thermal limiter (class 1 – DIN 12880), is activated in case of default of the main digital controller or of the main probe and/or as a water level protection, with visual alarm
    b) Safety device with adjustable entry point related to set point (at 1,5°C fixed beyond set point, class 2 – DIN 12880), in case of default of the main digital controller, with visual alarm
  • Temperature uniformity in the tank: ± 0,25°C at 80°C
  • Thermal Accuracy (time): ± 0,20°C at 80°C
  • Manufactured in compliance with Directions of the European Council 2006/42/CE (Machinery), 2006/95/CE (Low Voltage), 2004/108/CE (Electromagnetic Compatibility EMC), norms EN 61010-1:(2001).

More Less

Product category: Incubators

TS 21 DG Thermostatic incubator natural air convection

Our thermostatic incubators may be employed in different applications as, for example, for microbiological incubations, thermal tests on materials (to verify resistance or deformations), or for any other work needing a uniform and careful warming process.

Key Features
  • Full stainless steel construction: internal walls AISI 430, external structure AISI 304 “Scotch Brite”, allows maximum corrosion resistance and easy cleaning
  • Internal chamber with laminar air circulation and uniform warmth distribution offered by two lateral convection ducts with perforated walls and by resistors position in pre-warming chamber
  • Thermal insulation by high quality mineral fiber in adequate thickness
  • Double kind front door (one in this model), external stainless steel with thermal insulation, internal tempered glass to allow visual inspections without thermal modifications
  • Perforated stainless steel AISI 430 shelves, extractable and fixable on different heights
  • Rubber antiskid feet adjustable in height

Standard thermal equipment
  • Digital P.I.D controller with autotuning. PT100 probe
  • Temperature range: from + 5°C beyond ambient up to + 80°C
  • Visualized resolution: three digits (0,1°C), double display (set point, measured temperature)
  • Double overtemperature protection system:
    - Safety device with adjustable entry point related to set point (fixed 1,5°C beyond set point), in case of default of the main digital controller, with visual alarm
    - Safety independent adjustable thermal controller (class 3.1 – DIN 12880), is activated in case of default of the main digital controller or of the main probe, with visual alarm
  • Temperature uniformity in the chamber: ± 0,5°C at 37°C
  • Thermal Accuracy (time): ± 0,2°C at 37°C
  • Manufactured in compliance with Directions of the European Council 2006/42/CE (Machinery), 2006/95/CE (Low Voltage), 2004/108/CE (Electromagnetic Compatibility EMC), norms EN 61010-1:(2001).
On request:
  • Factory temperature calibration certificate (standard 1 measure for 3 points in the chamber)
  • Serial interface RS485 – RS232
  • Management software (reporting, graphics, alarms, running process visualization)
  • 4 wheels kit for floor stand (n.2 with brake)

More Less

Product category: Incubators

TSR 700 DG Cooled incubator compressor technology forced air circulation

Key Features
  • Full AISI 304 “Scotch Brite” stainless steel construction: allows maximum corrosion resistance and easy cleaning
  • Thermal insulation by high density CFC-free polyurethane
  • Thermally insulated AISI 304 stainless steel door (on request glass door with alloy frame with tempered low emission double glass panel to allow visual inspections without thermal modifications)
  • Automatic door lock with brake at 90° for an easier access to the chamber
  • Door with lock fastener and magnetic gasket on the 4 sides
  • Perforated stainless steel AISI 304 shelves, extractable and fixable on different heights
  • Pivoting wheels (no. 2 with brake )

Standard thermal equipment
  • Digital PID microprocessor controller with autotuning, PT100 probe
  • Temperature range: from + 1°C up to +60°C
  • Visualized resolution: three digits (0,1°C), double display (set point + measured temperature)
  • Climatic class ISO 4 for optimal working up to environmental temperature of +32°C
  • Double static condenser with ventilation group
  • Cooling system with ecological coolant R134a
  • Overtemperature protection system (Class 2 – DIN 12880):
    - Safety device with self-adjustable entry point related to set point (fixed 1,5°C beyond set point), in case of default of the digital controller or of the probe, with visual alarm
  • Temperature uniformity in the chamber : ± 0,5°C at +20°C
  • Thermal accuracy (time): ± 0,5°C at +20°C
  • Led lamps for internal lighting with microswitch at door’s opening
  • Manufactured in compliance with Directions of the European Council 2006/42/CE (Machinery), 2006/95/CE (Low Voltage), 2004/108/CE (Electromagnetic Compatibility EMC), norms EN 61010-1.(2001)
On request:
  • Glass door with alloy frame with tempered low emission double glass panel to allow visual inspections without thermal modifications
  • Service hole for monitoring auxiliary temperature probes (with related stopper)
  • Factory temperature calibration certificate (standard 1 measure for 3 points in the chamber)
  • Serial interface RS485
  • Management software (reporting, graphics, alarms, running process visualization)

More Less

Product category: Analyser appliances, Water baths

BS 3 DG Thermostatic bath, digital P.I.D. controller

Our thermostatic baths may be employed in different applications as, for example, for thermal precision tests on samples in water immersion, for quick defreezing of liquid samples, or for any other work needing a uniform, speedy and careful warming process.

Key Features

  • Full stainless steel AISI 304 construction, allows maximum corrosion resistance and easy cleaning .
  • Pressed tank with round corners to assure the maximum hygiene and easy cleaning
  • Insulated chamber between the tank and the external stainless steel walls (insulation by high quality mineral fiber), to assure a true thermal insulation, to avoid useless leakage of electric power and to reproduce isothermal conditions within all the tank.
  • Half circular armoured resistors placed to cover all the tank’s bottom area, to allow the maximum thermal uniformity, with perforated covering false bottom.
  • Temperature probe fixed within the tank, to provide for the most exact water temperature reading.
  • Equipped with water tap to allow complete water drain.
  • Rubber antiskid feet adjustable in height.
 Standard thermal equipment 
  • Digital P.I.D. controller with autotuning, NTC probe
  • Temperature range: from + 5°C above ambient up to boiling water (cover is needed in this case)
  • Visualized resolution: three digits (0,1°C), double display (set point, measured temperature)
  • Double over temperature protection system:
    a)    Safety independent thermal limiter (class 1 – DIN 12880), is activated in case of default of the main digital controller or of the main probe and/or as a water level protection, with visual alarm
    b)    Safety device with adjustable entry point related to set point (at 1,5°C fixed beyond set point, class 2 – DIN 12880), in case of default of the main digital controller, with visual alarm
  • Temperature uniformity in the tank:       ± 0,25°C at 80°C
  • Thermal Accuracy (time):                        ± 0,20°C at 80°C
  • Manufactured in compliance with Directions of the European Council 2006/42/CE (Machinery), 2006/95/CE (Low Voltage), 2004/108/CE (Electromagnetic Compatibility EMC), norms EN 61010-1:(2001).

More Less

Product category: Incubators

Code 9061025 TS 245 DG Thermostatic incubator natural air convection

Capacity litres 245

Our thermostatic incubators may be employed in different applications as, for example, for microbiological incubations, thermal tests on materials (to verify resistance or deformations), or for any other work needing a uniform and careful warming process.

Key Features
  • Full stainless steel construction: internal walls AISI 430, external structure AISI 304 “Scotch Brite”, allows maximum corrosion resistance and easy cleaning
  • Internal chamber with laminar air circulation and uniform warmth distribution offered by two lateral convection ducts with perforated walls and by resistors position in pre-warming chamber
  • Thermal insulation by high quality mineral fiber in adequate thickness
  • Double kind front door (two in this model), external stainless steel with thermal insulation, internal tempered glass to allow visual inspections without thermal modifications
  • Perforated stainless steel AISI 430 shelves, extractable and fixable on different heights
  • By pass duct for introduction of monitoring thermometric probes
  • Rubber antiskid feet adjustable in height

Standard thermal equipment
  • Digital P.I.D controller with autotuning. PT100 probe
  • Temperature range: from + 5°C beyond ambient up to + 80°C
  • Visualized resolution: three digits (0,1°C), double display (set point, measured temperature)
  • Double overtemperature protection system:◦Safety device with adjustable entry point related to set point (fixed 1,5°C beyond set point), in case of default of the main digital controller, with visual alarm
  • Safety independent adjustable thermal controller (class 3.1 – DIN 12880), is activated in case of default of the main digital controller or of the main probe, with visual alarm
  • Temperature uniformity in the chamber: ± 0,5°C at 37°C
  • Thermal Accuracy (time): ± 0,2°C at 37°C
  • Manufactured in compliance with Directions of the European Council 2006/42/CE (Machinery), 2006/95/CE (Low Voltage), 2004/108/CE (Electromagnetic Compatibility EMC), norms EN 61010-1:(2001).
On request:

- Factory temperature calibration certificate (standard 1 measure for 3 points in the chamber)
- Serial interface RS485 – RS232
- Management software (reporting, graphics, alarms, running process visualization)
- 4 wheels kit for floor stand (n.2 with brake)

More Less

Product category: Water baths

BS 5 DG Thermostatic bath, digital P.I.D. controller

Our thermostatic baths may be employed in different applications as, for example, for thermal precision tests on samples in water immersion, for quick defreezing of liquid samples, or for any other work needing a uniform, speedy and careful warming process.

Key Features

  • Full stainless steel AISI 304 construction, allows maximum corrosion resistance and easy cleaning .
  • Pressed tank with round corners to assure the maximum hygiene and easy cleaning
  • Insulated chamber between the tank and the external stainless steel walls (insulation by high quality mineral fiber), to assure a true thermal insulation, to avoid useless leakage of electric power and to reproduce isothermal conditions within all the tank.
  • Half circular armoured resistors placed to cover all the tank’s bottom area, to allow the maximum thermal uniformity, with perforated covering false bottom.
  • Temperature probe fixed within the tank, to provide for the most exact water temperature reading.
  • Equipped with water tap to allow complete water drain.
  • Rubber antiskid feet adjustable in height.

Standard thermal equipment 

  • Digital P.I.D. controller with autotuning, NTC probe
  • Temperature range: from + 5°C above ambient up to boiling water (cover is needed in this case)
  • Visualized resolution: three digits (0,1°C), double display (set point, measured temperature)
  • Double over temperature protection system:
    a)    Safety independent thermal limiter (class 1 – DIN 12880), is activated in case of default of the main digital controller or of the main probe and/or as a water level protection, with visual alarm
    b)    Safety device with adjustable entry point related to set point (at 1,5°C fixed beyond set point, class 2 – DIN 12880), in case of default of the main digital controller, with visual alarm
  • Temperature uniformity in the tank:  ± 0,25°C at 80°C
  • Thermal Accuracy (time):  ± 0,20°C at 80°C
  • Manufactured in compliance with Directions of the European Council 2006/42/CE (Machinery), 2006/95/CE (Low Voltage), 2004/108/CE (Electromagnetic Compatibility EMC), norms EN 61010-1:(2001).

More Less

About us

Company details

The Company was founded in the year 1960, when Mr. Bruno ENRICO, thanks to his previous experience, decided to start his own commerce activity in the field of analysis laboratory and healthcare products in the town of Torino.  

Very soon to such activity he started the production on his own project of laboratory instruments such as shakers, water baths, water distillers, incubators, thermostatic ovens, and also a small scale blowed glassware production was launched.

Thanks to the handcrafted scale of its production, the Company was in condition to produce also instruments according to specific Customer’s requirements or measures.

To complete its supply the Company decided also to offer technical assistance service for a large range of laboratory instruments.

Starting from last ‘70th – first ‘80th the Company follows, for its commercial sector, the new plastic disposable products which gradually enter in the market to substitute many glassware products.

Concerning its production’s line, the ENRICO Bruno during these years enforces its commercial network with many distributors in all the most important Italian regions.

Since the second half of the ‘90th the Company, now with the sons of the Founder, moves to the new site where it is presently working, and here enforces its productions capacity with new machinery and with up to date logistic facilities.

Now the Company maintains and develops its own two main activity branches:

-      The production’s sector develops on complete cycle basis its products, by the project and design activity to the final product and individual testing.

Such experience supports the selection and sales of a wide range of laboratory instruments and, in the meantime, the organisation of an efficient technical assistance service

-      The consumables sector is covering the most part of all the products employed in a chemical or biological lab and offers, for its Customers, all the proper stocks available for a real time service.

The direct contact with our Customers, the exact and well-timed satisfaction of their requests and the attention to a positive and satisfying co-operating relationship looking in the long period represent the cornerstones of the operating of the Company also in today’s economic globalisation times.

More Less