EFORE SPA of Castelfidardo at COMPAMED 2017 in Düsseldorf -- MEDICA Trade Fair

EFORE SPA

Via Jesina, 56/A, 60022 Castelfidardo
Italy

Telephone +39 071 721461
Fax +39 071 72146539
info@efore.com

Hall map

COMPAMED 2017 hall map (Hall 8b): stand G03

Fairground map

COMPAMED 2017 fairground map: Hall 8b

Contact

Erica Schmidt

Our products

Product category: Power supplies, power protection systems, power converters

MDP400 Open Frame 400W

The MDP400 open-frame series of single output AC/DC power supplies carry 2xMoPP level or patient protection and is available in standard voltages of 12V, 24V, 28V, 36V and 48V, with auxiliary 12V fan and 5V stand-by outputs.
The MDP400 open-frame medical grade power supplies are well suited for challenging medical electronics designs where low profile and low power dissipation is desired with minimal air movement. Its low profile is applicable for industry standard 1U equipment designs. Rated for 250W with free-air convection and 400W with forced air, this power supply includes an integral 12V fan output, eliminating the need for an additional fan supply. The power supply can be disabled with a logic signal and dissipates less than 0.5W in stand-by mode allowing for system level Energy Star compliance.

With typical efficiencies of 94% and efficiency load profiles that exceed 80 Plus Platinum requirements, the MDP400 is the most efficient power supply in its class.

More Less

Product category: Power supplies, power protection systems, power converters

Efore MDP400 400W U-Chassis Medical Grade Power Supply

The MDP400 U-chassis series of single output medical grade power supplies are approved for 2xMoPP level of patient protection, and is available in standard voltages of 12V, 24V, 28, 36V and 48V, with auxiliary 12V fan and 5V stand-by outputs.

The MDP400 U-chassis medical grade power supplies are well suited for challenging system designs where low profile and low power dissipation are desired with minimal air movement. Its low profile is applicable for standard 1U medical equipment designs. Rated for 250W with free-air convection and 400W with forced air, this power supply includes an integral 12V fan output, eliminating the need for an additional fan supply. The power supply can be disabled with a logic signal and dissipates less than 0.5W in stand-by mode allowing for system level Energy Star compliance.

With typical efficiencies of 94% and efficiency load profiles that exceed 80 Plus Platinum requirements, the MDP400 is the most efficient power supply in its class.

More Less

Product category: Power supplies, power protection systems, power converters

Efore MDP400 400W Front Fan Medical Grade Power Supply

The MDP400 front fan series of medical grade power supplies feature a compact form factor, high conversion efficiency and 2xMoPP means of patient protection. With demonstrated efficiency ratings of 94%, the MDP400 series are “80 Plus Platinum” compliant, making them the most efficient power supplies in their class.

The fan cooled versions include the latest in fan speed control. The fan speed control monitors the operating conditions and applies the absolute minimum required airflow.  This includes a "fan off" condition under light load operation (< 50W). This optimizes audible noise for fan cooled products to the lowest levels possible and maximizes fan lifetime.  An ideal combination for operating room and laboratory equipment where moving air and audible noise must be kept to the bare minimum.

More Less

Product category: Power supplies, power protection systems, power converters

Efore MDP400 400W Perforated Cover Medical Grade Power Supplies

The MDP400 perforated cover series of single output medical grade power supplies are 2include 2xMoPP level of patient protection and are available in standard voltages of 12, 24, 36 and 48 VDC, with auxiliary 12V fan and 5V stand-by outputs.

The MDP400 perforated cover medical grade power supplies are well suited for challenging system designs where low profile and low power dissipation are desired with minimal air movement. Its low profile is applicable for industry standard 1U medical equipment designs. Rated for 250W with free-air convection and 400W with forced air, this power supply includes an integral 12V fan output, eliminating the need for an additional fan supply. The power supply can be disabled with a logic signal and dissipates less than 0.5W in stand-by mode allowing for system level Energy Star compliance.

With typical efficiencies of 94% and efficiency load profiles that exceed 80 Plus Platinum requirements, the MDP400 is the most efficient power supply in its class.

More Less

Product category: Power supplies, power protection systems, power converters

Efore 400W MDP400 Top Fan Medical Grade Power Supplies

The MDP400 top-fan series of medical grade power supplies feature a compact form factor, high conversion efficiency and 2xMoPP means of patient protection. With demonstrated efficiency ratings of 94%, the MDP400 series are “80 Plus Platinum” compliant, making them the most efficient power supplies in their class.

The fan cooled versions include the latest in fan speed control. The fan speed control monitors the operating conditions and applies the absolute minimum required airflow.  This includes a "fan off" condition under light load operation (< 50W). This optimizes audible noise for fan cooled products to the lowest levels possible and maximizes fan lifetime.  An ideal combination for operating room and laboratory equipment where moving air and audible noise must be kept to the bare minimum.

More Less

Product category: Power supplies, power protection systems, power converters

Efore 400W MDP400 Sealed Medical Grade Power Supplies

Efore's MDP400 medical grade sealed power supplies combine exceptional performance with versatile features into a 38 cubic inch package that fits anywhere with minimal thermal or environmental limitations.

With 94% efficiency and flexible packaging and cooling options, these power supplies are the perfect choice for operating room and other electro-medical equipment where fan noise and moving air are not acceptable. The sealed version of the MDP400 is available as a conduction-cooled module in an IP67 rated case, or as a convection cooled power supply with the addition of the optional heat sink assembly.

It's super compact at 3.27 x 8.34.1.63" (82.0 x 212.0 x 41.5 mm) and weighs in at 2.87 lbs. (1300 g) without the heat sink, or 3.27 x 8.34 x 2.74" (83.0 x 212.0 x 69.5mm) and weighs 3.67 lbs. (1665 g) with the optional heat sink.

More Less

Product category: Power supplies, power protection systems, power converters

Efore 600W MCB600 Configurable Medical Grade Power Supplies

The MCB600 is a highly configurable medical grade power supply series that provides unrivalled performance and flexibility. Delivering 600 watts and up to 8 outputs from a 5” x 3” x 1U (78 x 144 x 41mm) package, the MCB600 is one of the smallest commercially available power solutions on the market today.

The MCB600 power supplies consist of an input module that provides four medically isolated slots for up to four output modules of any type and in any combination. Output modules are available in four single nominal output voltages: 5, 12, 24 and 48 VDC and two dual nominal 12 VDC output modules, each offering an extremely wide voltage adjustability range. The built-in fan and speed control circuitry assures proper forced air cooling, minimizing operational noise and enhancing the service lifetime.

The MCB600 series is certified to IEC/EN/UL/CSA 60601-1 2nd and EN 60601-1, CSA C22.2 No.601.1, ANSI/AAMI ES60601-1, 3rd edition for medical equipment requiring 2xMoPP protection grade. The series meets the EN55022 EMC limits of Class B for conducted and radiated emissions as well as the EN 61000-3 and EN 60601-1-2 EMC standards.

More Less

Product category: Power supplies, power protection systems, power converters

Efore 600W DDP600 U-Chassis Medical Grade Power Supplies

The DDP600 medical grade U-chassis power supplies provide a steady 600 watts of regulated DC power through the extended 85 to 305 VAC input voltage range, all in a 4.4" x 7.3" x 1.5" (107 x 178 x 41mm) form factor.

Capable of 800 watts of peak power for 10 seconds, the DDP600 U-chassis series is very well suited for applications demanding a high start-up current, while allowing for space and cost savings. The u-chassis version is very well suited for challenging system designs where low profile and low power dissipation are desired with minimal air movement.

Exceptionally high reliability is achieved with 94% efficiency for lower heat generation which facilitates better thermal management in space constrained systems.

More Less

Product category: Power supplies, power protection systems, power converters

Efore 600W DDP600 Front-Fan Medical Grade Power Supplies

The DDP600 front-fan series medical grade power supplies are offered in a configuration with an internal variable speed front-fan for optimal output power and thermal management, and provides a steady 600 watts of regulated DC power through the extended 85 to 305 VAC input voltage range, all in a 4.4" x 7.3" x 1.5" (107 x 213 x 41mm) form factor.

Capable of 800 watts of peak power for 10 seconds, the DDP600 medical grade front-fan series is very well suited for applications demanding a high start-up current, while allowing for space and cost savings. The front-fanned version has a built in smart cooling solution that adjusts the fan speed to the working conditions, minimizing acoustical noise and air movement.

Exceptionally high reliability is achieved with 94% efficiency for lower heat generation which facilitates better thermal management in space constrained systems.

More Less

About us

Company details

Efore Group is an international company which designs and manufactures custom and standard DC power systems and AC/DC power supplies for a wide range of demanding industry applications including telecom, industrial, medical, lighting, utility and military. Efore’s story began in March 1975 in Finland. Since then, Efore has grown from a six person engineering office to a truly global organization, operating on four continents with nearly 700 employees and serving customers worldwide.

In 2013 Efore acquired ROAL Electronics, a recognized leader in digital power conversion and solid state lighting power products. Under the well-known ROAL brand, Efore designs and manufactures cutting edge power conversion products that offer superior energy efficiency, more intelligent designs, flexibility and creativity for the Industrial, Medical, DataCom, LED Lighting and Marine markets.

Efore's head office is based in Finland and its production units are located in China and Tunisia. Sales and marketing operations are located in Europe, the United States and China.

More Less

Company data

Sales volume

50-99 Mio US $

Number of employees

500-999

Foundation

1975

Area of business
  • Components, parts, modules, Original Equipment Manufacturers
  • Electrical and electronic components