GINEVRI srl of Albano Laziale (Rome) at MEDICA 2017 in Düsseldorf -- MEDICA - World Forum for Medicine


Via Cancelliera, 25B, 00041 Albano Laziale (Rome)
Telephone +39 06 93459330
Fax +39 06 93459393

Hall map

MEDICA 2017 hall map (Hall 11): stand D03

Fairground map

MEDICA 2017 fairground map: Hall 11

Our range of products

Product categories

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.15  Ultraviolet and Infrared radiation equipment

Ultraviolet and Infrared radiation equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.15  Ultraviolet and Infrared radiation equipment
  •  Medical phototherapy equipment

Medical phototherapy equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.02  Respiration equipment

Respiration equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.02  Respiration equipment
  •  Non invasive ventilation, devices for

Non invasive ventilation, devices for

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.02  Respiration equipment
  •  Emergency and transport respiration equipment

Emergency and transport respiration equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.02  Respiration equipment
  •  Oxygen-ozone therapy, equipment for

Oxygen-ozone therapy, equipment for

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.03  Incubators


  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.05  Oxygen equipment

Oxygen equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.09  Hospital and Care equipment
  • 01.09.02  Ward equipment and apparatus

Ward equipment and apparatus

  • 01  Electromedical equipment / Medical Technology
  • 01.09  Hospital and Care equipment
  • 01.09.02  Ward equipment and apparatus
  •  Children's cots

Children's cots

  • 01  Electromedical equipment / Medical Technology
  • 01.09  Hospital and Care equipment
  • 01.09.05  Neonatal care equipment
  • 01  Electromedical equipment / Medical Technology
  • 01.10  Furnishing
  • 01.10.02  Furnishings / Equipment for baby units

Furnishings / Equipment for baby units

  • 03  Diagnostics
  • 03.01  Clinical chemistry
  • 03.01.01  Bilirubinometers/bilimeters


Our products

Product category: Incubators, Ward equipment and apparatus, Neonatal care equipment, Furnishings / Equipment for baby units


In the last 40 years GINEVRI has designed and manufactured neonatal incubators which have always been characterized by their original technical solutions and up-to-date performances. Reliability and user friendliness have always been typical of the philosophy that has guided GINEVRI in the design of its line of incubators OGB Polytrend:

  • UNBREAKABILITY AND LIGHTNESS of the hood, the base and the other main components, completely made of one-piece injection moulded Polycarbonate;
  • HIGH REDUCTION OF INFECTIONS RISK, with the possibility of easy and complete disassembly of the incubator for cleaning and disinfection;
  • WIDE HOOD, with two main doors and six port holes as a standard;
In the Poly trend infant incubators, besides the longstanding GINEVRI traditions of reliability and performances, the latest technology is now at the service of caregivers:
  • LCD screen
  • Trends display
  • Advanced full modularity
  • Functions update via software
  • Peripheric skin temperature monitoring
LCD SCREEN FOR GRAPHIC DISPLAY: All settings and measured values are shown on the LCD graphic display placed at the centre of the control panel. The practical encoder on the control panel allows setting all the parameters and surfing the various displays:
  • the numerical values display;
  • the menu display;
  • the settings display;
  • the time setting display;
  • all the TREND displays: air temperature, skin temperature, peripheric skin temperature, relative humidity, oxygen concentration.
The LCD display and the control by means of the encoder give the maximum MODULARITY to the incubator, with the possibility of enhancing its functions just through a software updating. PERIPHERIC TEMPERATURE MONITORING: The second skin probe, placed on the baby’s foot or on a twin, allows performing a further temperature measurement.

More Less

Product category: Ultraviolet and Infrared radiation equipment, Medical phototherapy equipment, Ward equipment and apparatus, Children's cots, Neonatal care equipment, Furnishings / Equipment for baby units

Alhena and Alhena Plus

The Alhena series of Infant Warmers are considered the best for personnel “adept at work” because they permit a more direct control of the temperature, observation and also free access to the baby and to carry out in the most efficient way possible reanimation, oxygen therapy, and the execution of medical procedures which call for more than one person to be working at the same time.

The Alhena plus created by GINEVRI, respecting the current safety standards, which it fully satisfies all those requirements, supplies other services which make it a true and complete newborn therapy centre. Amongst the most important design characteristics and functions of the Alhena plus there are characteristics unique with respect to other models available on the market, the presence of a Phototherapy system created with the technical innovation of 6 Blue Power LED’s (with wavelength centred around 455nm) which make an efficient treatment of jaundiced newborns possible, being 5 or 6 times more powerful than those devices equipped with traditional fluorescent lamps.

The illumination is also provided using 4 white Daylight LED’s which make it possible to observe the baby without any altering the baby’s natural colour.
An advanced electronic control panel permits simultaneous access to all the functions using simply to understand procedures thus insuring the maximum ease of use.

The Alhena series can control the heating level by the following fuctions:
  • Automatic Mode;
  • Manual Mode;
  • Pre-Heating Mode.
A complete set of alarms give the maximum safety of operation: the devices are supplied with both visual and acoustic alarms for HI and LOW Skin Temperature, Malfunction and/or Disconnection of the skin sensor probe and Power Loss. The Apgar module permits monitoring of the Apgar index by means of a digital timer and an acoustic signal at intervals of 1, 3, and 5 minutes from activation.

The manouverability of the patient bed, adjustable in a 360° arc using a round tilting system and equipped with sidewalls individually capable of being folded down and also removable confirm the distinctive characteristics of the GINEVRI neonatal therapy centres.

More Less

Product category: Bilirubinometers/bilimeters

One Beam

The One Beam with it’s ease of use and it’s remarkable precision, gives the precise information on bilirubin levels and support which the Doctors need.
The One Beam allows for a rapid photo-metric analysis of the bilirubin total in the serum (totals of the conjugated and non-conjugated) using a capillary tube as an optical cell.
The bilirubin concentration is determined with a photo-metric measurement at the 455nm and 575nm wavelengths: the first wave length gives important information on the quantity of bilirubin, the second gives an indication of the presence of hae-moglobin, the substance which interferes with accurate measurement of the bilirubin level. Thanks to an algorithmic mathematical calculation, the One Beam is capable of eliminating the haemoglobin interference factor allowing for accurate results to be of the bilirubin concentration level in the blood. The results are immediately displayed on the One Beam’s OLED screen in mg/100ml, or alternatively in micro-moli per litre.

The One Beam’s important innovation with respect to previous GINEVRI models is the use of a single optical beam which illuminates the sample at one single point, achieved using a special system of automatic filters. Thanks to this system it is possible to have a:

  • More stable signal – because when the light beam crosses the sample it is cleaned of all frequencies not useful for the measurement, thereby reducing the photo-isomerization phenomenon of the bilirubin which distorts the measurement, guaranteeing a more stable signal.
  • More precise – because the reading is taken at only one point of the capillary tube which eliminates errors and discrepancies caused by readings taken at two different points.
  • Stronger signal – due to the fact that it is a single beam is used not one which has been split down into two or more beams.
A special system of collimation and concentration of the light beams allows for a reading even when the sample quantity of serum obtained after centrifugation is very small, as in the case of polycythemia (up to a haematocritic level of 80%), or due to partial filling of the capillary tube.
The One Beam’s sophisticated electronics, micro-processor controlled, guarantees better working of the signal which is then transformed into the corresponding bilirubin level and immediately displayed on the OLED screen.
The One Beam with printer allows for immediate printing of the results of every single exam.

More Less

Product category: Respiration equipment, Non invasive ventilation, devices for, Emergency and transport respiration equipment, Oxygen-ozone therapy, equipment for, Oxygen equipment, Neonatal care equipment

Baby Start

The Baby Start is a manual resuscitator, light and compact, suitable suitable for delivery rooms, postpartum, in special units for neonatal care and in NICU.

It is a simple and efficient device to resuscitate asphyxiated neonates by mask or endotracheal tube. Resuscitation is carried out with positive pressure and manual control and free expiration. The Gas mix flows in the lungs at pressures adjustable by the operator. The use of the T piece can realize the desired PIP and to determine a constant PEEP to create the FRC and to improve the Tidal Volume.

Resuscitation pressures (PIP and PEEP) are easily readable on the fast response manometer. Above the chosen peak inspiratory pressure (PIP) the safety “max pressure” valve comes into operation to avoid, the danger of excessive inspiratory pressures.

Manual resuscitation is achieved placing thumb on the PEEP valve, placed on the T-piece in a confortable position for the operator. The gas mixture flows until the thumb is removed.

The resuscitator works connected to a supply of air, oxygen or a mixture of both, through a Flowmeter, Blender or a Mixer, that can be then connected to a Humidifier.

The device uses a single use patient circuit completed with a expiratory valve and silicone neonatal mask

The Baby Start can be installed, by dedicated support, on Infant Warmers, on Transport Incubator or Resuscitation Trolley.

On the upper part of the device there is a button to activate the timer that counts seconds and that underlines, by a longer sound, 5, 10 and 15 s. This function is useful to perform a sustained inflation.

More Less

Product category: Ultraviolet and Infrared radiation equipment, Medical phototherapy equipment


The phototherapy lamp MIRA, use latest LED technology to produce blue therapeutic light (peak 460nm) and fiber optics to give therapy to little patients affected by jaundice. It has a compact and light structure with a soft touch control panel where are presentwarnings, alarms and a wide display indicating therapy time, highly visible up to 7m.

The therapy light, produced by a high power LED, is transmitted, trough a flexible fiber optic cable, to a lightening element of small dimensions that has to be placed in contact with patient skin.

One of the characteristics is that of being able to set an “intensive therapy” further to the “normal therapy” (guidelines AAP 2004*).

The compact design of the system enables to perform the therapy directly in the baby cot as well as for homecare. If necessary it can also be used combined with other conventional phototherapy lamps, therefore ensuring maximum therapeutic efficiency and a sensible reduction of the therapy exposure time for the patient.

The phototherapy lamp MIRA is portable and can be positioned on a shelf or on a pivoting trolley.


*American Academy of Pediatrics, guidelines for clinical practice, undercommission for hyperbilirubinemia: Management of hyperbilirubinemia in the newborn infant 35 or more weeks of gestation, 2004; 297-316.

More Less

About us

Company details

GINEVRI is an independent company focused on the manufacture of advanced medical equipment and solutions for Neo-natal Care. The company has accumulated many years of experience concerning the complex and innovative requirements of these medical devices and how they need to be improved with the latest new technologies available. GINEVRI has invested in research and development to such an extent that the company is accredited to the ISO 9001:2008 and ISO13485:2012 quality standards and all products comply with the appropriate European CE marking Medical Directives.
GINEVRI 's head office is based in the industrial area of Albano Laziale, only 20 km from Rome. The company's product design and manufacturing facility is centred around our purpose built premises where assembly and testing, after sales servicing when not performed on site, logistics and all administration functions are carried out in a modern environment. Most component parts are produced in-house with the latest CNC machining centres, thereby ensuring that all rigorous international quality requirements are met.
The company markets its products in Italy through its own, highly trained, direct sales force. In addition, it is very actively expanding its efforts in the international market, which now accounts for over 35% of sales .This successful activity is achieved and supported via a qualified network of specialist distributors in more than 40 countries.
The challenge for GINEVRI’s team is to support the latest developments of clinical research with completely innovative devices covering the requirements of the scientific community. GINEVRI’s traditional range of products includes: Infant Incubators, Transport Incubators, Infant Warmers, Radiant Heaters and Phototherapy Lamps including Fiber Optic Mira as well as Baby Cots, Bilimeters and Oxygen Tents. All our systems are completed with an extensive range of available accessories.
Currently GINEVRI has been focusing its research on the newest technologies in the field of neo-natal non-invasive respiratory care enhancing the nCPAP ventilatory support by delivering ventilator breaths via nasal prongs which are synchronized with the infant’s respiratory flow, in nSIPPV and nSIMV mode. The company is very proud to have launched onto the global marketplace the Giulia neo-natal ventilator, in which all the newest non-invasive ventilation modes are at the disposal of the new-born, who can now be treated with the most efficient and up to date techniques applied in a gentle way in conjunction with the traditional ventilation techniques.
Whilst we at GINEVRI clearly recognize the importance of a technologically advanced instrument system, we similarly believe that any product is only as good as the after sales service which supports its performance. It is for this reason that we work everyday to provide a customer support service which is designed for the total customer satisfaction.

More Less