Medical Computer Systems Ltd. of Moscow at MEDICA 2017 in Düsseldorf -- MEDICA Trade Fair

Medical Computer Systems Ltd.

P.O. Box 58, 124460 Moscow
Passage 4922, 4-2, Zelenograd, 124460 Moscow
Russian Federation

Telephone +7 495 913-3194
Fax +7 495 913-3195
mks@mks.ru

Hall map

MEDICA 2017 hall map (Hall 9): stand A38

Fairground map

MEDICA 2017 fairground map: Hall 9

Our range of products

Product categories

  • 01  Electromedical equipment / Medical Technology
  • 01.01  Diagnostics
  • 01.01.01  General Diagnostics

Our products

Product category: General Diagnostics

DEC 22 disposable EEG cap

DEC22 is a disposable system of 22 electrode EEG cap with pre-gelled passive Ag/AgCl scalp electrodes. DEC22 is intended for use with encephalographs and amplifiers of medical signals by special adapter.

Application area:
neuroscience, neurophysiology, functional diagnostics.

Advantages:
  • 100% solution to the problem of disinfection;
  • Ready to use pre-gelled electrode system;
  • Fast installation ~ 3.5 min.;
  • DEC22 has more channels than DEC18 covering the full 10-20 system.
Additional accessories:
  • DEC22-DB25 adapter for EEG amplifiers with common connector;
  • DB25-TouchProof adapter for connection to any EEG amplifier.

More Less

Product category: General Diagnostics

Neurobelt mobile EEG cap

Neurobelt is a cap with 10 preinstalled Ag/AgCl EEG electrodes and 8 channel wireless amplifier.

Neurobelt is intended to record EEG, IR trigger events, 3D acceleration events to files of different formats (EDF+ 16 bit, BDF+ 24 bit, GDF 32 bit) or transmit it on-line via stream LSL (Lab Streaming Layer) for analyze by third-party software as MATLAB / EEGLAB, OpenViBE etc.

Neurobelt can be used for education, research and development in EEG, neuro-computer interfaces (brain-computer interface, direct neural interface, brain interface), bio-feedback (BCI), neuromarketing, neurogaming, brain fitness.

More Less

Product category: General Diagnostics

EEG amplifiers NVX

DC EEG amplifiers with 24, 32 or 48 monopolar channels for electrodes and 4 auxiliary bipolar channels for sensors

NVX is the DC amplifier with 24, 32 or 48 monopolar channels for electrodes and 4 auxiliary bipolar channels for sensors NeoSens. The device is used in training systems, clinical and scientific researches as a part of computer-based research system for short-term registration of the electro-physiological signals, primarily EEG. The amount of channels and presence of auxiliary channels depends of models.

Basically NVX amplifiers is used with NeoRec application software. NeoRec is software for the acquisition of EEG and other biomedical signals during the process of scientific or medical research. The program records the signals in various file formats for further analysis and processing by third-party software.

Supported file formats: EDF+, BDF+, GDF, EEG, SM.

For viewing or processing the recorded data, the following third-party programs and software packages are recommended: EDFbrowser, Polyman, SigViewer, EEGLAB, ERPLAB, OpenViBE, BioSig.

More Less

About us

Company details

Experience
The company Medical Computer Systems (MCS) is specialized in the design and manufacture of high-tech medical devices since 1993 year. Projects include a wide spectrum of diagnostic and therapeutic equipment such as EEG, ECG, automatic external defibrillators, biomedical amplifiers for clinics and researches.

Innovation

Innovation is key to successful devices, and MCS is committed to remaining on the cutting-edge of technology. As new technology is developed, it is integrated into our solutions to benefit our clients. Case in point, we were among the first to use sigma-delta AD converters for biomedical devices. DSP-technologies, state-of-the-art algorithms and embedded real-time OS are extensively used by our engineers.

Customized Solution

Working closely with prospective clients right from the beginning is important in order to guarantee end results that meet the client's needs and expectations. A thorough analysis of the client's requirements is performed early on followed by a detailed technical proposal that includes structural diagrams, preliminary estimates of device parameters and a cost evaluation. Through our ISO9001 / ISO13485 quality system, document control system and progress tracking mechanism, immediate feedback and project status is provided to customers at any development stage.

Our Team

Our multi-disciplinary team of engineering and researchers comprises a mix of very motivated young individuals and seasoned professionals who bring their expertise to our customers. Many of our engineers and programmers have obtained Ph.D degrees in biomedical engineering and the computer sciences from the leading universities in Russia. Communication is also an important factor to successful product development. Our engineers work closely with our clients designated managers and employees to ensure a smooth completion of the project. The medical electronics field is a highly regulated market with domestic and international regulations and guidelines. Taking into account these regulations and the necessary requirements early on saves time, money and heartache later in the development cycle. MCS has valuable experience with the regulation process achieving CE and FDA approval for all the projects we have undertaken.

Our Customers

Our international client base includes leaders in the medical device industry located both in Europe and North America covering a broad spectrum of healthcare disciplines. We have also collaborated with the leading space agencies in the development of products presently at work on the International Space Station. (References upon request).

Concept and Design

During the initial phases of a project, a lot of time is spent with clients to analyze their requirements and specifications, crystallize the concept and select the best solution. Several specialists - industrial designer, mechanical, electrical or software engineers, or specialty consultants - are involved in this feasibility phase to ensure that the client’s objectives in terms of clinical performance, costs, manufacturability and patentability are met or exceeded in order to maximize the investment. Simple concept drawings or complete presentation-quality 3D models can be presented depending upon the client’s needs. This step eliminates the bulk of the development risk early on, and can serve as an important milestone for the client and potentially for its investors.

Prototyping and Verification

The medical electronics field is strictly regulated with domestic and international regulations and guidelines. Taking into account these regulations early on saves a lot of time, money and heartache later in the development cycle. MCS has valuable experience with this process. MCS provides electronic circuit development for analog and digital boards, micro-controller, DSP, and drivers programming, 3D modeling, verification and validation. Using the latest integrated development tools, our team provides product reliability, horsepower, and flexibility. As part of most development programs, verification testing is performed throughout the development process to ensure that we stay on course toward a successful endpoint. After completion of the design phase, a series of validation tests is typically orchestrated in order to address any shortcomings relative to the original design goals. We encourage the involvement of outside validation engineers during this process in order to maximize objectivity.

Production

Once the design is completed, a full documentation packages is handed hand off to production. Alternatively, MCS can organize manufacturing the product in the ISO certified facility.

More Less