Product category: Analyser appliances, Pipette tips, Laboratory items, Laboratory items made of plastic
AHN myTip Standard Tips
AHN universal fit tips are engineered for a wide variety of pipettors and are ideal for laboratories with multiple brands of pipettors – even multi-channel pipettors. Our universal tips feature the universal grip design, using flexible materials with a series of bands and supports producing a positive seal. AHN tips have thin walls and a small surface area at the tip, greatly minimizing the possibility of the tip retaining sample droplets. In addition the small surface area reduces the touch-off angle between the outer tip wall and the receiving sample tube. This reduced touch-off angle virtually eliminates the potential of capillary retention between the tip orifice and tube wall. Each of our tips is molded to give a flash-free and uniform delivery orifice for consistent accuracy and reproducible sample delivery. All our tips are provided with calibration lines at specific volumes, acting as visual checks to minimize any risk of errors during sample aspiration.
Secure fit and simple ejection of tip
Tropfen Quick and simple volume check
Tropfen Precise pipetting without loss of sample
Tropfen Elimination of risk of sample contamination
Product category: Filtration systems, Laboratory items, Laboratory items made of plastic, Shaking and mixing units, Mixing units for vessels, tubes, etc.
Mini Spin Column System
CUSTOMISED SOLUTIONS FOR
FILTRATION ULTRA FILTRATION DNA|RNA PURIFICATION
The Mini Spin Column System is specially developed for use in purifications, isolations and separation of biomolecules, particularly DNA/RNA. The Filter Tubes are made of high grade clear polypropylene. The Filter Tubes can be delivered with various membranes filters depending on customer specific applications. High initial filtration rate and an optimal receiving volume characterize this system.
The Receiver Tubes with 1.5 and 2.0 mlvolumes are specially designed for fitting with AHN Filter Tubes. Injection moulded from autoclavable, non-wettable, premium grade, virgin polypropylene. Receiver Tubes with calibration lines at specific volumes, acting as visual checks to minimize any risk of errors during sample handling.
Product category: Analyser appliances, Filtration systems
An innovative, cost-effective vacuum manifold for all filter plates in SBS standard. The individual parts of the AHN Manifolds are made of tempered transparent acrylic material. The connecting sleeve is made of PTFE and the washer is made of synthetic rubber. The Manifold can be cleaned with normal laboratory cleaners, mild detergents, without problems.
The AHN Manifold contents from following parts:
1 piece of vacuum chamber- bottom part for inserting the receiver plates (height = 50 mm)
1 piece of vacuum-connecting sleeve for screwing into the bottom part of the chamber
1 piece of vacuum chamber- upper part for inserting the filter plate (height = 20 mm)
1 piece of spacer for inserting into the bottom part of the chamber (height 22 mm)
AHN Biotechnologie GmbH is a company located in Nordhausen - Germany, which is specialized in the development, manufacturing and distribution of LIQUID HANDLING PRODUCTS for the use in laboratories worldwide. The product range includes pipette tips, filter tips, pipettes, tubes and products for filtration and purification of biomolecules.