Titanox s.r.l. of Torre dé Picenardi (CR) at MEDICA 2017 in Düsseldorf -- MEDICA Trade Fair

Titanox s.r.l.

Via Canove 2/A, 26038 Torre dé Picenardi (CR)
Italy

Telephone +39 0375 394065
Fax +39 0375 394067
amministrazione@titanox.it

Hall map

MEDICA 2017 hall map (Hall 12): stand A06

Fairground map

MEDICA 2017 fairground map: Hall 12

Our range of products

Product categories

  • 01  Electromedical equipment / Medical Technology
  • 01.06  Sterilisation
  • 01.06.02  Sterilisation and disinfection equipment and accessories / autoclaves

Our products

Product category: Sterilisation and disinfection equipment and accessories / autoclaves

class B having fractional vacuum

AUTOCLAVE mod. ASTER 2000

Thanks to its completely computerized function checking system, AUTOCLAVE Mod. ASTER 2000 class B having fractional vacuum is able to sterilize all the following materials:

Class B:
Massive and porous products, double wrapped, unwrapped, wrapped, “A” and “B” types in conformity with EN 13060:2004 rules.

GENERAL FEATURES:

  • Fractional vacuum autoclave type B that makes possible the sterilization of the following materials: hollow body A/B, porous, massive, wrapped and unwrapped.
  • Microprocessor check.
  • Multilanguage display.
  • Program selection menu. ( See “Sterilization cycles table”)
  • Alphanumerical Display (16 x 2).
  • Digital on-screen display for selected cycle,
  • Program selection with 5 keys: Start/Enter, Cycle, Dry Off, Pump, Reset
  • LED for warning: LEV.MIN, LEV.USED, LEV.MAX, ALARM, DOOR LOCKED, CYCLE.
  • Last cycle read in and start with Start key.
  • Last cycle execution repetition in case of blackout.
  • Real-time on screen display of the following values:
    - Chamber temperature and pressure.
    - Current phase.
    - Steam generator temperature and chamber shell temperature.
    - Chamber shell temperature set and pressure set.
Through the sequential pressure of the key” PUMP”.

  • Stand by: immediate or absent.
  • Double tank: clean and dirty water.
  • Water to be used: demineralised/distilled.
  • Water consumption: 850 cc per cycle
  • Possible cycles with max. load: n. 6 cycles
  • Possibility of setting automatic and manual load/discharge of the tanks.
  • Hard vacuum with two-head pump
  • Stainless steel chamber.
  • Chamber dimensions: 20 LT, Ø 267 mm, Depth: 390 mm 
Safety devices:

  • Checking system always on.
  • Process Evaluation System.
  • Electromechanical safety system against accidental opening of the door during the sterilization cycles.
  • Steam generator with safety thermostat.
  • Pre-heating chamber resistance having thermostat with manual reset.
  • 2,4 bar calibrated safety valve (certified).
  • Steam generator separated from the chamber.
  • Certified bacteriological filter.
  • Integrated printer with thermo-graphic paper. Maximum paper consumption per cycle: 300 mm. PC serial exit RS 232. Cycle’s data recording (every 0,5 sec.) with Hyper Terminal (text document). You will also have the opportunity to create calculation  charts (for example: Excel, Open office, Star office and so on).
  • Electrical feeding: 230 V (AC) / 50- 60 Hz
  • Maximum absorbed power: 1950 W.
  • Feeding current: 8,8 A
  • Overall dimensions: W 555 L 720 H 520 mm

More Less

Product category: Sterilisation and disinfection equipment and accessories / autoclaves

AUTOCLAVE mod. ASTER 3000

Following to the coming into effect  of the EUROPEAN SET OF RULES  UNI:EN:13060-2004 “Small steam  sterilizer units”, TITANOX S.r.l. is  very glad to present you the new AUTOCLAVE Mod. ASTER 3000 class  B-S-N having fractional vacuum.
Thanks to its completely computerized function checking system, AUTOCLAVE Mod. ASTER 3000 is able to sterilize all the following materials:
Class B: Massive and porous products, wrapped and unwrapped. Class S: A and B hollow body products, wrapped and unwrapped. Class N: Massive unwrapped products. 

GENERAL FEATURES: 
  • Fractional vacuum autoclave type B– S – N that makes possible the sterilization of the following materials: hollow body A/B, porous, massive, wrapped and unwrapped.
  • Microprocessor check.
  • Multilanguage display.
  • Software realized to help the operator during the cycle selection. The software will help the operator to choose the correct cycle for the material to be sterilized. Program selection menu. ( See “Sterilization cycles table”)
  • 128-character display (8 x 16).
  • Digital on-screen display for: selected cycle, phases, temperature, pressure, cycle counter, device serial number and dater.
  • Program selection with 4 keys: Start/Enter, Reset, Up/+, Down/-.
  • Last cycle read in and start with Start key.
  •  Programmable start-up.
  • Stand by: immediate, absent or after a period of time with energy saving.
  • Double tank: clean and dirty water.
  • Water to be utilized: demineralised.
  • Water not recycled for the sterilization cycle.
  • Water consumption: 500 cc per cycle (type N) / 900 cc per cycle (type B and S).
  • Possible cycles with max. load: n. 5 cycles type B/S; n. 9 cycles type N.
  •  Possibility of setting automatic and manual load/discharge of the reservoirs.
  • Hard vacuum with two-head pump.
  • Stainless steel chamber.
  • Chamber dimensions: 30 LT, 267 mm, Depth: 544 mm.
  • Security devices:
    - Checking system always on.
    - Process Evaluation System.
    - Electromechanical safety system against accidental opening of the door during the sterilization cycles.
    - Steam generator with security thermostat and external resistance with manual reset.
    - 2,4 bar calibrated security valve (certified).
    - Electronic chamber pressure excess control . When the pressure will reach 2,5 bar, the control card will immediately stop the current cycle and an alarm will be heard.
  • Steam generator separated from the chamber.
  • Certified bacteriological filter.
  • Integrated printer with thermo-graphic paper. Maximum paper consumption per cycle: 300 mm.
  • PC serial exit RS 232. Cycle’s data recording (every 0,5 sec.) with Hyper Terminal (text document). You will also have the opportunity to create Excel charts.
  • Electrical feeding: 230 V (AC) / 50- 60 Hz
  • Maximum absorbed power: 1950 W.
  • Feeding current: 8,8 A
  • Overall dimensions: W 555 L 720 H 520 mm.

More Less

Product category: Sterilisation and disinfection equipment and accessories / autoclaves

BOX FOR STERILIZATION AND PRESERVATION

Completely made of anodized aluminium.
Mod. Overall Dim.
A1-110-255 250x100x50 h mm.
A1-111-257 250x100x70 h mm.
A1-112-256 250x150x60 h mm.
A1-113-307 300x150x70 h mm.
A1-114-348 340x200x80 h mm.
A1-115-357 350x150x70 h mm.
A1-116-409 400x200x90 h mm.
A1-117-410 400x300x100 h mm.
A1-118-428 420x200x80 h mm.
A1-119-618 610x180x80 h mm.

INSTRUMENT TRAY WITH LID
Entirely made of stainless steel. Completely pressed without welding.

Mod. Overall Dim.
A2-127-21C 210x110x50 h mm.
complete
A2-127-21S 210x110x50 h mm.
w/o internal tray
A2-128-24C 240x160x50 h mm.
complete
A2-128-24S 240x160x50 h mm.
w/o internal tray
A2-129-30C 300x180x65 h mm.
complete
A2-129-30S 300x180x65 h mm.
w/o internal tray
A2-130-36C 360x210x70 h mm.
complete
A2-130-36S 360x210x70 h mm.
w/o internal tray
A2-131-40C 400x230x80 h mm.
complete
A2-131-40S 400x230x80 h mm.
w/o internal tray

INSTRUMENT TRAY for sterilization. Completely made of stainless steel. Completely pressed without welding.

Mod. Overall Dim.
A2-135-210 210x110x50 h mm.
A2-136-240 240x160x50 h mm.
A2-137-300 300x180x65 h mm.
A2-138-360 360x210x70 h mm.
A2-139-400 400x230x80 h mm.

More Less

Product category: Sterilisation and disinfection equipment and accessories / autoclaves

ALUMINIUM CONTAINERS WITH 1 VALVE

The aluminium container with one valve offers a system which allows to carry out a mechanical filtering.
This system occurs in different phases which stand out for the placing of the valve.
The valve is in state of rest, before sterilization.
During the vacuum phase, the valve opens completely, so that the air escapes from the container. Then, the valve closes and the counter valve opens; in this phase steam enters and the sterilization phase begins. At the end of the cycle the valve closes airtight and this will maintain the load sterile inside the container.

GENERAL FEATURES

  • Completely made of aluminium alloy 5005, thickness 2 mm. Body and lid completely pressed without welding. Very sturdy.
  • Gasket which ensures a perfect watertight, made of non-toxic silicone sponge that guarantees the maximum  seal. Lock with locking system against casual opening. Seal application system.
  • Label-holder for storage and classification.
  • Handles for transport.
  • Guaranteed anodizing for natural colour or other colours, thickness 20 microns.
  • Lid colours: grey, yellow, blue, red, green.
  • Stacking system compatible also with other manufacturing houses.

FOR AN EXCELLENT OPERATION, WE SUGGEST YOU TO ALWAYS MAKE THE FOLLOWING CHECKS BEFORE
USING THE CONTAINERS:

  • Lid gasket: check that the gasket is sufficiently elastic and that there are no cuts on it.
  • Locks: check that the locks levers (hinges) sufficiently oppose the force supplied in the opening and that the pressure   caused by the clamp is adequate to compress the silicon gasket.
  • Valve: check the good functioning of the valve. It is necessary to open the lid and depress with a soft pointed rod the   internal part of the valve, passing through the hole situated in the centre of the perforated aluminium plated.

More Less

Product category: Sterilisation and disinfection equipment and accessories / autoclaves

ROUND STERILIZING DRUM

ROUND STERILIZING DRUM with sliding bands for sterilization in autoclave and dry heat unit. Completely
made of 18/10 stainless steel. Pressed lid and bottom.

ROUND STERILIZING DRUM MOD. “FILTER”  for sterilization in autoclave. Completely made of 18/10 stainless steel. Perforated hinged lid and bottom. Interchangeable filters.

More Less

About us

Company details

Founded in 1980, the TITANOX Co. of Torre de Picenardi (CR), Italy, has specialized right from the outset in the field of Hospital Medical Furniture & Instruments with the production and sales of electromedical items (devices and accessories for sterilization) and a wide range of stainless steel furniture and instruments for the Healthcare Industry. Quality and attention to details is the underlying factor for all the production process.

Selection of raw material, the choice of purchasing strictly from qualified suppliers, the best technical know-how & expertise in manufacturing process and the meticolous quality control procedures applied, are components which are fundamental to the quality-oriented reality of the TITANOX Co. The Company owns, freehold, a total of 20000 sq. meter area of which 6000 covered for workshop production and utilizes most advanced technology CNC Machinery equipment and plant systems, thanks to which the Company has affirmed itself as leader in medical equipment field both nationally and internationally.

The TITANOX Co. presently exports either directly or through a network of Distributors to more than 50 countries worldwide.
Constant efforts in the search for solution ever more oriented to better quality and consequently to better service to our Partner, the Costumer, assure the implementation of high-standard quality system in conformity to the norms of
EN ISO 9001:2008 - EN ISO 13485:2012 + AC:2012 - CE MED 31461

More Less