Measuring The system starts upon reagent addition and stops with the coagulation of the sample. All results are automatically calculated and then displayed and printed. Electronic linkage pipette, which has manual or automatic selection
The opto-mechanical measuring system Circulating magnet underneath the cuvette causes a steel spheres to rotate. This sphere optimises the gentle mixing of sample which results in uniform coagulation. All sensors in the measuring system are protected from becoming soiled.
Preincubation block 12 samples position at 37°C ± 0,1
The evaluation The measuring results are displayed % INR, Ratio, mg/dl, g/l or seconds. All programs are stored with personalized parameters.
Technical Charecteristics: Internal printer RS232 port Normal working temperature range：10℃～30℃ Pre-warming time：around 15 minutes（from room temperature 20℃ to 37℃） Dimension：350×230×135mm3 Measure precision：≤5% Channel coherence：≤5% Repeatability：≤5% Linear precision：|R|≥0.97 Working voltage：AC220V Frequency：50Hz Input power：60W
COLOMBO is a fully automated coagulation analyzer, with photo-optical clot detection.
COLOMBO has high sensitive photometer designed to performe all routine test such as PT, APTT, TT, Fibrinogen, with a light soucre provided by a solid state state three wave-lengh emitter at 460 nm, 510 nm, 630 nm which enure accurate results.
2 Measuring Channel: 1 Clotting, 1 Chromogenic
Parameters: PT, APTT, TT, FIB
Photo-optical clot detection system for a real walk away test performing
High performances graphic software running under windows xp