Precision Polishing Technology
Our special polishing technique is an original method which was developed by working unflinchingly on the polishing of shapes and materials which many people abandon, saying that the polishing is difficult or impossible with conventional methods, such as grinding, electrolysis, blast, buff, and barrel. We can perform mirror finish of a rough surface along the shape. Please see processed examples below.
We achieved mirror finish of discontinuous surfaces such as peaks, sides, and valleys of the inner surface of a flexible tube used for semiconductor manufacturing equipment which represent ultra clean technology. As one of the key points of contamination control, there is a surface roughness of the inner surface of a fluid path pipe for pure water, high-purity gas, and chemical. Our special polishing could get the finished surface either equaling or surpassing electrolytic polishing or chemical polishing. Moreover, we can uniformly polish the whole area of the corrugated surface of vaccum seramic pinchuck
In the field of medicine or analytical equipment, the pipes which are narrow and bent, manufactured by spinning or to taper have been increasing, but we can polish them. We can polish pipes, if their inner diameter is 0.003inch and their length is 39.4inch or if their inner diameter is 0.007inch and their length is 78.8inch.
Proven Materials of Precision Polishing Technology
- Stainless Steel SUS303,304,316,316L
- Fine Ceramics Silicon Carbide (SiC), Alumina, Aluminum Nitride
- Nickel Titanium
- Cobalt Chrome