This cross-arm unit is optimised for chest servey in standing and sitting patient’s position. Therefore its cross-arm does not rotates.
It provide spatial resolution from 2,5 to 3,2 Lp/mm. Device support is provided with cross-arms which cameras with CCD, x-ray tube and diaphragms with light localizer are fixed on. In all units the cross-arm can move in vertical direction to 1100mm. In ProGraph units the cross-arm have fixed focal distance 1000mm. The function of automatics helps the doctor choose required characteristics of survey. High frequency generator is connected to a 220 V ± 10% electric system with resistance to 1 Ohm.
The unit has special external storage element on hard disks for supplying of long-term storage of images. Capacity of storage allows place on hard disks image archives accumulated within 10 years of unit operation. Built inside storage software provides particular reliability of saved information and absolute archives reliability in case of one of hard disk death. In ProGraphв unit radiologist workbench is equipped with graphic monitor 24” (610 mm) for work with images, database and image description.. Assistant workbench in units is equipped with graphic monitor 20” (510mm) to fill in the database, operate x-ray unit and control image quality.
The unit is equipped with laser office printer for periodical report printing. Radiologist workbench in ProGraph is equipped with a medical printer SONY-UP-990AD (or similar), which prints on roll termopaper. Besides, it is possible to connect to the station any device of the medical institution, which has integrated possibilities of DICOM print.
ProGraph software meets the requirements of the DICOM 3.0 international protocol, which contains the latest changes of the standard of 2004 (with picture image compression JPEG2000) and possibilities of printing on DICOM-printers. That permits, when necessary, to integrate it into any modern medical informational system. The program is being developed in close cooperation with radiologists, so it contains not only generally accepted formalized protocols, but also the necessary forms of periodical reports. The program possesses wide opportunities of processing the received images through special filters.
This modern mobile x-ray van possesses reliable properties. The independent system of work allows to reach a great opportunities in reaching the far distance areas.
Entering through the entrance door patient get into the registry with assistant work place, computer and conditioner. The registry is separated from exam room by x-ray protective partition with glass and movable door.
Digital Radiographic Unit ProGraph, as well as a couch, is placed in the exam room. For bed-patients examination special radio-lucent table is available. Additional improvements, such as lift and door on trolleys are made to assist special patients in getting inside the mobile x-ray van.
The household room and the WC adjoin to the exam room. Wardrobe, refrigerator and a table are also located there. All rooms are protected from the x-ray beams. In a separate compartment under the van a diesel mini-station is placed, which allows examining patients on a log distance from the electric mains.
Independent water supply system with volume 100 lt.- tank, provides its working capacity within several days. Using pomp it is possible to make water set from a well depth up to 6 meters. Owing the clearing filter it is possible to use technical purpose water for filling a tank.
Digital Radiographic Unit ProGraph features: •Spatial resolution from 3,5 Lp/mm. •Device support is provided with cross-arms with CCD camera, x-ray tube and diaphragms with light localizer are fixed on. In all units the cross-arm can move in vertical direction to 1100 mm. In ProGraph units the cross-arm have fixed focal distance (standard as 1000 mm or 1800 mm by request). In ProGraph the cross-arm may rotate from -90° to +90°. •Radio-lucent table from fine-dispersed MDF for ProGraph. •The function of automatics for organs helps the doctor choose required characteristics of survey. •High frequency generator is connected to a 220 V ± 10% electric system with resistance to 1 Ohm.
Digital Radiography Unit of ProGraph series was developed for radiographic and diagnostic investigations in patient's standing, sitting. Units of the series also have radio-lucent tables for execution of different kinds of investigation as well as for surgical procedures in lying position. They have cross-arm rotating round the axis that locates on the column of cross-arm vertical transference. The function of automatics for organs helps the doctor choose required characteristics of survey.
Device support is provided with cross-arms which cameras with CCD-matrix, X-ray tube and diaphragms with light localizer are fixed on. In all units the cross-arm can move in vertical direction to 1100 mm.
Spatial resolution of ProGraph-5000 is 3,5 Lp/mm.
In ProGraph-5000 units the cross-arm have fixed focal distance 1000 mm and may rotate from -90° to +90°.
Unit supplied with Radio-lucent table from fine-dispersed MDF with carbon-fiber deck.
Radiologist and assistant workbenches has special external storage element on hard disks for supplying of long-term storage of images. Capacity of storage allows place on hard disks image archives accumulated within 10 years of unit operation. Built inside storage software provides particular reliability of saved information and absolute archives reliability in case of one of hard disk death.
Radiologist workbench unit is equipped with one or two medical monitors. Assistant workbench in all units is equipped with graphic monitor to fill in the database, operate x-ray unit and control image quality. The unit is equipped with laser office printer for periodical report printing.
ProGraph software meets the requirements of the DICOM 3.0 international protocol. The program is being developed in close cooperation with radiologists, so it contains not only generally accepted formalized protocols, but also the necessary forms of periodical reports. The program possesses wide opportunities of processing the received images through special filters.
Operating principle: To register the X-ray radiation, which passed through the chest, x-ray machine ProScan uses a silicon linear detector. To make a fluorography, the detector is being moved along the chest horizontally together with a sector-shaped x-ray formed by the slit diaphragm. High quality images, lowest dose of investigation, convinient conditions for personal, easy requirements to x-ray room make this CXR (chest x-ray) machine better solution for mass screening compare to bucky based solutions.
Specific features of fluorogrphy units ProScan®-2000 and ProScan®-7000 •The silic linear detector does not need periodic maintenance. It provides spatial resolution in the patient’s plane of 2.2 Lp/mm for ProScan-2000 (3.2 Lp/mm for ProScan-7000). High efficiency of registration permits obtaining a direct short with 1% contrast resolution at only 100 mR in the patient’s plane for ProScan-2000 and at 250 mR for ProScan-7000. •Chest X-ray machine protective cabin made of modern composite materials lowers personnel radiation exposure practically to the natural level. •High frequency generator is connected to a 220 V ± 10% single-phase network with resistance up to 3 Ohm. To ensure proper operation, the majority of similar units need a 380 V ± 10% three-phase electric system with maximum resistance of 0.3 Ohm.
Radiologist and assistant workstations. Both stations are equipped with the latest models of computers. Assistant workstation is equipped with a professional graphic monitor 20 inches, and that of the radiologist with the following monitors: ProScan-7000: professional medical monochrome monitor 20 inches WIDE IF 2002M* and a professional graphic 17 inches, ProScan-2000: professional medical monochrome monitor 24 inches.
The ProScan software enables the doctor to examine the images after fluorography on the big monitor, at the same time using the second one for work with the database. A professional graphical printer gives 256 gray shades and high spatial resolution on thermal paper. Herewith the image is equally informative on the monitor as well as on a hard copy. To print out periodical reports, the device is equipped with a laser office printer. DVD-RAM cartridges are used for archiving of the database and images. The competitive advantage of these media in comparison with usual DVD consists in a special box to provide protection to the disk surface from damages; besides, the disk can contain twice as much information. Thus, the holding capacity of such disk is 9.4 Gb (about 3000 images for ProScan-2000 or 1500 images for ProScan-7000). Today, it is one of the safest ways of information keeping, which is specially certified for storage of medical diagnostic images.
ProScan® Software meets the requirements of the DICOM 3.0. The program is being developed in close cooperation with radiologists that is why it contains not only generally accepted formalized protocols, but also the necessary forms of periodical reports. The program offers wide opportunities for processing obtained images through special filters to detect tuberculosis.
Our mobile X-ray rooms were designed for mass chest x-ray examinations of rural population and for people in refugee or military camps, for children at schools, etc. You can choose between several variants of the vehcles: • KAMAZ-43114 and KAMAZ-4326 off road trucks; • HYUNDAI HD78 and KAMAZ-4308 city road truck.
Different characteristics of chassis allow to choose a model which combine with local conditions.
The X-ray rooms body has been made of plastic, enforced by metal construction elements, it has good thermostatic data. The climate control system adjusts the inside temperature to normal conditions in 15 min.
This mobile room equipment may include autonomous electric power supply system, water supply, electric climate control system and hot-water heating. These resources allow to investigate the population far away from settlements during for several days.
The van is divided into two rooms by a transparent polycarbonate parting-wall. In the front part of the van – the room for medical procedures – a digital unit ProScan is installed. Patients enter the room through one door and leave it through another one, which makes it possible to increase radically the mobile room's capacity. Three people may be in the room for medical procedures simultaneously. At the reception time a bactericidal irradiator works.
The second room is a cabinet for medical staff. It contains an assistant workbench and the necessary set of furniture (a table, a chair, a wardrobe, a small table, a sofa and a mini-refrigerator.
The mobile room is equipped with an energy storage battery to maintain steady voltage for the device, when it runs on unstable power supply units. At the customer's request, the mobile room can be equipped with a mini-power station to enable patient examination far away from power lines.
Company AMICO was founded ten years ago. Since that time the company has been well known as the leader in production of X-ray equipment and accessories in Russia. We have hundreds of customers in Russia from small local hospitals to large clinics. You can find our equipment everywhere in Russia. Moreover in the recent years company AMICO has started exporting of its products - our equipment is already being used in Europe (Latvia, Bulgaria), Africa (Morocco), Asia (Mongolia), CIS countries. Everywhere due to its high quality and reliability our equipment has very good references from doctors: radiologists, surgeons, dentists.
Now AMICO JSC is a holding including Moscow office, one branch in Aprelevka (Moscow region) which manufactures X-ray systems for general radiology, ROENTGENPROM JSC (Istra and Protvino, Moscow region both) which produces chest X-ray survey systems and mobile X-ray rooms, ROENTGEN-KOMPLEKT Ltd. (Aleksandrov, Vladimir region) which produces X-ray protective accessories and film processing equipment.
Our motto is EVERYTHING FOR RADIOLOGY. We produce a complete spectrum of medical radiologic equipment and accessories, and we do a lot R&D works for designing new apparatus and models.
Our quality management system in designing, development, manufacturing, realization and technical service of X-ray medical devices, including mobile fluorographic rooms is based on the wellknown international standard EN ISO 9001:2000. In 2002 ROENTGENPROM JSC was certified according to standard EN ISO 9001:2000 by International Certification Services SGS (Switzerland). AMICO JSC has the same certificate issued by SGS since 2003. The 2004-audit, conducted by EUROCAT Institute for Certification and Testing (Germany), has proved that the quality system of ROENTGENPROM JSC is in compliance with the requirements of DIN EN ISO 13485:2003 quality management system for medical equipment producers. Also, since 2004 our low-dose digital scanning fluorograph ProScan has CE Certificate from EUROCAT Institute for Certification and Testing (Germany), fulfills the requirements according to Medical Devices Directive 93/42/EEC.