Chiba University
New actuator improves finger extension in rehab gloves
02.08.2024
Soft rehabilitation gloves have become essential tools in helping patients with hand function-related disabilities regain finger movement. Traditionally, these gloves use soft pneumatic actuators driven by air pressure to facilitate motion. However, most current soft actuators primarily assist in finger bending (flexion) but struggle with enabling finger straightening (extension).
Karin Kaiser/MHH
Cardiac medicine: minimally invasive replacement of any heart valve
19.04.2024
Hannover Medical School (MHH) is presenting a decisive advancement in cardiology: the minimally invasive replacement of the tricuspid valve using a new catheter system, a significant expansion of treatment options for heart valve defects.
Andreas Schmitz/TU Munich
Hand prostheses: AI enables more intuitive use
05.03.2024
Previous robotic prostheses only respond to their users' movement intentions to a limited extent. A new control method being developed at the TU Munich could help: A network of 128 sensors and the use of artificial intelligence could allow people to control their prosthetic hands more intuitively and naturally.
ionadidishvili
Hand prostheses: Artificial intelligence makes gripping more intuitive
15.12.2023
A better understanding of muscle activity patterns in the forearm supports a more intuitive and natural control of artificial limbs. This requires a network of 128 sensors and artificial intelligence based techniques.
University of Houston
3D printable prostheses to restore amputees' finger mobility
18.10.2023
A groundbreaking, easy-to-use 3D printable finger prosthesis created by a recent University of Houston graduate could offer amputees a low-cost solution to restore finger functionality.
Fraunhofer IBMT
Bidirectional control of prosthetic hands using ultrasonic sensors
13.10.2023
Researchers at Fraunhofer are working as part of an EU research project to improve control of prosthetic hands down to individual fingers.
Marius Maasewerd, HAWK
Orthobionics degree program qualifies specialists for orthopedics
01.08.2023
Starting from the winter semester of 2023, the Orthobionics program will launch a distinctive bachelor's degree. Geared towards the requirements of the orthopedic technology industry, they will be adept in independently providing care with modern orthoses and prostheses.
Chalmers University of Technology
Bionic hand: surgical and engineering innovations enable unprecedented control
21.07.2023
For the first time, a person with an arm amputation can manipulate each finger of a bionic hand as if it was his own. Thanks to revolutionary surgical and engineering advancements that seamlessly merge humans with machines, this breakthrough offers new hope and possibilities for people with amputations worldwide.
Biodesign Lab / Harvard SEAS
Ankle exosuit: more independence for post-stroke wearers
09.06.2023
Designed for independent use in community settings, the new exosuit could help stroke survivors improve their gait outside of the lab and during their daily routines.
Exoskeletons for everyday use: Non-invasive method for controlling prostheses
26.05.2023
Modern prostheses are already smart, but they still have their limits. The Assistive Intelligent Robotics Lab at FAU is therefore also researching an intuitive and non-invasive method for controlling prostheses. In our interview, those involved tell us exactly what they are working on together with neurologists and surgeons from the Erlangen University Hospital.
Jens Meyer/Uni Jena
Specially coated titanium reduces risk of clots on prostheses
26.05.2023
An international research team led by the german University of Jena has now developed a promising approach to significantly reducing blood clotting on the heart valve material titanium.
BarcelonaTech (UPC)
Low-cost robotic arm created by students as an alternative to conventional prostheses
25.05.2023
A low-cost robotic arm created by students as an alternative to conventional prostheses: The ARM2u biomedical engineering team, from the UPC’s Barcelona School of Industrial Engineering (ETSEIB), is working on new functions for their low-cost 3D-printed transradial prosthesis.
AG Klinische Neurotechnologie, Charité Berlin
Controlling neural exoskeletons more precisely with diamond sensors
02.02.2023
In the recently launched NeuroQ lighthouse project, the project partners develop highly sensitive diamond-based quantum sensors that will enable paralyzed people to control neural exoskeletons more precisely.
StudioVK
A prosthetic limb that can read my mind
04.01.2023
A team at FAU is investigating how intelligent prostheses can be improved. The idea is that interactive artificial intelligence will help the prostheses to recognize human intent better, to register their surroundings and to continue to develop and improve over time.
3Digity
Finger orthosis: Custom fit with 3D printing
10.05.2022
Following an injury or surgery, orthotics are key components of the recovery and rehabilitation process. The University spin-off 3Digity designs 3D-printed customized finger orthoses to foster rehabilitation as custom orthotics can drastically speed up the recovery process.
Digitalization in orthopedic technology – A craft is changing
22.11.2021
Orthopedic auxiliary means are mostly still produced in manual labor today. But orthopedic technology is also trying out new ways by using tools like 3D scanners, digital models and 3D printing. Nadja Singer from Ottobock explains in our video interview how this changes the production of auxiliary means.
Digital orthopedic technology: scan, customize, print
01.07.2021
When auxiliary means like orthoses or prostheses do not come from the shelf, but are adapted to the wearer, this means true crafting: In the past, a plaster mold of a body part had to be made as a template to create an individual aid from it step by step. Fortunately, we have come a long way until today.
Orthopedic technology: 3D scanners change the industry
01.07.2021
Orthopedic technology involves taking a measurement of a specific body part and then creating a medical device, be it prosthesis or orthosis, that fits. While optical scanners are already used for some of these measurements, others are still performed through manual labor and craft to create molds of the body. 3D scanners are changing this.
PantherMedia/belahoche
Bionic prosthesis: easy to put on, intuitive to use
22.09.2020
Patients who receive a prosthesis after the amputation of a limb often have to train for weeks or months until they can control the technology and use it in everyday life without problems. At the Medical University of Vienna, the world's first bionic prosthesis has now been developed that has a closed control loop and enables immediate, intuitive use.
Endoprostheses - Ultrasound to detect loosening?
27.02.2019
Many patients suffering from arthrosis or other kinds of damage in the hip joint need an endoprosthesis at some point. However, this prosthesis can loosen again after some time, so that it must be replaced. In order to delay this replacement surgery for as long as possible, the TH Mittelhessen University of Applied Sciences develops a new diagnostic method.