08/05/2023Soft textile orthoses are used in the treatment of certain medical conditions. Making these custom devices by hand is difficult, time-consuming, and susceptible to human error. A research project has developed a digital platform designed to simplify the production of soft orthoses.
24/03/2023Researchers at ETH Zurich, Empa and EPFL are developing a 3D-printed insole with integrated sensors that allows the pressure of the sole to be measured in the shoe and thus during any activity.
30/01/2023It has been shown that the percentage of ankle fractures that undergo surgery could be substantially reduced, from more than 30 per cent to 10 in the most common type of fracture. The key is a clear-cut treatment routine that benefits both patients and caregivers, according to a doctoral dissertation at the University of Gothenburg.
20/01/2023Imperial researchers have developed a low-cost, easy-to-manufacture stabiliser for broken bones to help in regions where such devices are expensive or in short supply and people sometimes resort to homemade options.
19/01/2023Osaka Metropolitan University scientists have revealed that knee extension velocity while seated is a stronger predictor of walking performance than muscle strength in elderly patients after their total knee arthroplasty (TKA) surgery.
16/01/2023Older knee replacement designs are just as effective as newer models – according to new research from the Norfolk and Norwich University Hospital and University of East Anglia.
04/01/2023A team at FAU is investigating how intelligent prostheses can be improved. The idea is that interactive artificial intelligence will help the prostheses to recognize human intent better, to register their surroundings and to continue to develop and improve over time.
20/10/2022Multimodal therapies should be promoted on a larger scale in the German healthcare system, in line with the National Disease Management Guidelines.
10/05/2022Following an injury or surgery, orthotics are key components of the recovery and rehabilitation process. The University spin-off 3Digity designs 3D-printed customized finger orthoses to foster rehabilitation as custom orthotics can drastically speed up the recovery process.
22/11/2021Orthopedic auxiliary means are mostly still produced in manual labor today. But orthopedic technology is also trying out new ways by using tools like 3D scanners, digital models and 3D printing. Nadja Singer from Ottobock explains in our video interview how this changes the production of auxiliary means.
16/11/2021Sports medicine and physiotherapy involve many different types of equipment - from cardiovascular training to joint mobilization and playful rehabilitation. You can get an insight into the different products in our photo gallery from MEDICA 2021.
15/09/2021Precise, extremely quick and accurate – a new kind of navigation device in the OR uses a highly-developed camera technology to guide the surgeon through difficult procedures – directly in the OR. Prof. Ulf Liljenqvist, Chief Medical Director of the Clinic for Spinal Surgery at the St. Franziskus Hospital Münster, talks about his experiences in using the device.
02/07/2021A new biocompatible polymer-based composite material could soon replace metal plates in treating difficult and unstable fractures. Developed at KTH Royal Institute of Technology in Stockholm, the newly-developed material is as strong as dental composites yet non-toxic.
01/07/2021When auxiliary means like orthoses or prostheses do not come from the shelf, but are adapted to the wearer, this means true crafting: In the past, a plaster mold of a body part had to be made as a template to create an individual aid from it step by step. Fortunately, we have come a long way until today.
01/07/2021Orthopedic technology involves taking a measurement of a specific body part and then creating a medical device, be it prosthesis or orthosis, that fits. While optical scanners are already used for some of these measurements, others are still performed through manual labor and craft to create molds of the body. 3D scanners are changing this.
01/07/2021Orthopedic technology is a true craft: That's because prostheses and orthoses are rarely off-the-shelf products. Orthopedic technicians must typically use different materials to custom create and fit the devices. Many of these processes are manual. For several years now, 3D scanning and 3D printing have modernized the industry thanks to digital design freedom and flexible production.
01/07/2021Creating custom-made medical devices to target individual patient needs: that is the core function and primary objective of orthopedics. Using 3D printers for this will make sense in the future. Luxinergy is an innovative Austrian technology company that specializes in the development of biocompatible resins and large-format 3D printers.
07/06/2021Lower leg fractures put a great strain on patients due to their long healing process. In the future, an intelligent implant could control how the bone grows together again and thus optimize the healing process. In our video, you can learn from the developers at Saarland University how this works and what role artificial intelligence plays here.
01/04/2021Surgeons have only limited options to practice surgical techniques before they enter the operating room. The implantation of an endoprosthesis requires extensive practical training since it necessitates strength and utmost precision. The "Dynamic HIPS" project develops a virtual reality hip implant simulator that provides realistic haptic feedback.
08/06/2020Professional athletes depend on a speedy recovery from sports injuries or surgery because their livelihood depends on their physical fitness. Returning to competition too soon after injury can have negative health consequences. Standard tests are now combined with virtual reality to determine the optimal time to return to play.
22/05/2020Athletes not only have to be fit and stay in shape, but they also have to achieve peak performance, especially when they get ready for athletic events. Optimized and individualized performance training requires data from external laboratories and institutes. The [i/med] Sports platform from DORNER Health IT Solutions provides a complete workflow − from anamnesis to diagnostic report.
22/08/2019The German Medical Award will take place on November 18, 2019, as part of the MEDICA trade fair in Düsseldorf. The ceremony emphasizes the commitment to excellence in cutting-edge care for patients. Doctors, clinical centers and companies in the medical and healthcare industry can demonstrate their achievements in medicine and management in hopes of receiving the coveted award.
20/08/2019Movement, strength and coordination - after injuries as well as in healthy athletes, these three components must be intact for movements to run smoothly. At the Beta Klinik in Bonn, Dr. Markus Klingenberg, a specialist in orthopaedics, trauma surgery and sports medicine, offers neuromuscular training with a playful character that can be adapted to the patient's needs.
01/07/2019Stationary or mobile - competitive athletes rely on regular health assessments. They must deliver peak performance and be physically fit during competitions. But when do they reach their physical limits? Are there any devices that provide information, no matter where the test subject is located?
01/07/2019Those who integrate physical activities into their own lifestyle live healthier and more balanced. But where are the physical limits? Can health status measurements also be carried out on the road? Discover more about how sports medical examinations contribute to maintain performance and minimize health risks in our Topic of the Month.
03/06/2019It takes consistent repetitions if rehab patients want to relearn skills after surviving a stroke. This requires extreme effort. The industrial sector uses robots to perform repetitive tasks or handle jobs that require strength. What has been a fixture in factories for decades is now also making its way into rehabilitation facilities.
08/03/2019Orthopedic implants – they are a necessity when it comes to congenital or acquired limb length discrepancies. However, full weight-bearing during the limb lengthening process is not feasible with previous implant models. For the first time, the 3D Surgery division at the Medical Center of the University of Munich has succeeded in using an implant that facilitates immediate weight-bearing.
27/02/2019Many patients suffering from arthrosis or other kinds of damage in the hip joint need an endoprosthesis at some point. However, this prosthesis can loosen again after some time, so that it must be replaced. In order to delay this replacement surgery for as long as possible, the TH Mittelhessen University of Applied Sciences develops a new diagnostic method.