Biomaterials: toolbox for the development of bioadhesives
Menu

Image: An environmentally friendly rapid antigen test placed on a green leaf; Copyright: Okos Diagnostics

Okos Diagnostics

From waste to sustainable wins: Rapid tests with biomaterials

27.08.2024

Over 2 billion rapid test (lateral flow assay) kits are produced every year, adding tens of thousands of tons of used materials to the growing global volume of medical waste. Every test kit contains around 12 grams of plastic and is designed for single use. The company Okos Diagnostics, founded in 2022, aims to reduce the waste with a sustainable rapid test solution.
Read more
Image: A pile of white lateral flow test cassettes; Copyright: SteveAllenPhoto999

SteveAllenPhoto999

DIANA: Alliance for innovative point-of-care tests

23.07.2024

To improve local medical care through point-of-care tests (PoCT), 80 partners from industry and research in Saxony and Thuringia have joined forces to form the DIANA (Diagnostics and Sustainability) alliance. Dr. Dirk Kuhlmeier coordinates the alliance.
Read more
Image: A man and a woman in a workshop check bio-based material for the production of respiratory masks; Copyright: Hamburg/TU Ilmenau

Hamburg/TU Ilmenau

Environmentally friendly respiratory masks: sustainable and biobased

10.07.2024

In view of the global challenges posed by environmental pollution and the need to make medical protective equipment efficient and sustainable, a team at Ilmenau University of Technology, led by Prof. Florian Puch, has developed an innovative solution: bio-based respiratory masks.
Read more
Image: Preview picture of video

Green Hospital – Saving resources through waste management

06.02.2024

A lot of energy, water and other resources are consumed in the daily operation of a hospital. At the same time, hospitals generate high CO2 emissions and a large amount of waste, which must be disposed of safely and hygienically. There is potential for hospitals to make savings here if they take a close look at their waste disposal and optimize it.
Read more
Image: Preview picture of video

Laboratory equipment – fit for the future with more sustainability

30.11.2023

We spoke to exhibitors at MEDICA 2023 who are driving sustainability in laboratory operations with their products. Watch the video to find out what levers are available here and which products can already be manufactured sustainably today.
Read more
Two men in suits in an exhibition hall at MEDICA, one interviewing the other; copyright: beta-web | Messe Düsseldorf

Breath the spirit of MEDICA 2023 – Highlight tour with Director Christian Grosser

13.11.2023

Topics like artificial Intelligence, automation and robotics, and sustainability are shaking the medical industry – and both MEDICA and COMPAMED reflect that. We are walking through the trade show halls of MEDICA with Christian Grosser, Director Health & Medical Technologies at Messe Düsseldorf, to talk about this: What are his impressions of this year’s MEDICA and COMPAMED?
Read more
Image: Medical suction cup balanced on a fingertip; Copyright: Transire Bio

Transire Bio

Suction cup as a direct route for medication into the bloodstream

02.11.2023

Many diseases require weekly or even daily injections of medication into the blood. To make this gentler for patients, researchers have developed a suction cup for the inside of the cheek. The suction cup allows drugs to be administered non-invasively directly into the blood. With the founding of the start-up Transire Bio, this is now to become marketable.
Read more
Image: Empty hospital bed with partition in a clinic; Copyright: davidpradoperucha

davidpradoperucha

Sustainability: What is the carbon footprint of a hospital bed?

22.09.2023

Researchers from the University of Waterloo completed the first-ever assessment of a Canadian hospital to reveal its total environmental footprint and specific carbon emission hotspots.
Read more
Picture: A man in a white coat holds a medical tube in his hands; Copyright: UKW / Stefan Dreising

UKW / Stefan Dreising

Sustainable endoscopy: Würzburg University Hospital reduces CO2 footprint

22.08.2023

In a pilot project, the University Hospital of Würzburg has succeeded in significantly reducing the CO2 footprint in endoscopy. The focus was on consumables. Prof. Alexander Meining initiated the project together with his colleague Dr. Dorothea Henniger.
Read more
Image: Close-up of a boy with a healed minor cut after surgical tape stitches; Copyright: ellinnur

ellinnur

Biomaterials: toolbox for the development of bioadhesives

28.07.2023

The team of Prof. Dr. Thomas Scheibel, Chair of Biomaterials at the University of Bayreuth, has compiled a current overview of the state of research on protein-based bioadhesives.
Read more
Image: View on the main entrance of a modern hospital building, a car stops in front of it; Copyright: jdskiles2

jdskiles2

Hospital construction: WHO recommends Politecnico di Milano design guidelines

20.06.2023

The World Health Organization presented the new design recommendations for new hospitals to be built in the European Region, the result of a research partnership with the Politecnico di Milano. The document was prepared by the Design & Health Lab in the Department of Architecture, Construction Engineering and the Built Environment at the Politecnico.
Read more
Image: Hospital buildings behind a forest and a wheat field; Copyright: IndustryAndTravel

IndustryAndTravel

Hospital construction: challenging projects for good healthcare

17.03.2023

Building a hospital is a large project that involves many experts and countless workers and contractors. They are all coordinated to reach a common goal: a building that serves the wellbeing of patients. MEDICA exhibitor Axis Medical has a lot of experience with this – read more in our interview!
Read more
Image: Xing Xie is holding holding a chip in close up; Copyright: Georgia Tech

Georgia Tech

New ultrafast water disinfection method is more environmentally friendly

27.02.2023

Georgia Institute of Technology researchers have found a way to use small shocks of electricity to disinfect water, reducing energy consumption, cost, and environmental impact.
Read more