30.08.2023A special type of starch could soon be used as an excipient in medicine to improve the treatment of patients.
22.08.2023The team of Dr. Elisha Krieg at the Leibniz Institute of Polymer Research Dresden has developed a dynamic DNA-crosslinked matrix (DyNAtrix) by combining classical synthetic polymers with programmable DNA crosslinkers.
22.08.2023In a pilot project, the University Hospital of Würzburg has succeeded in significantly reducing the CO2 footprint in endoscopy. The focus was on consumables. Prof. Alexander Meining initiated the project together with his colleague Dr. Dorothea Henniger.
28.07.2023Developing technology to quickly and efficiently bioprint human tissues at scale is the goal of a new project led by Penn State researchers. When fully developed, the technology will be the first to enable the fabrication of scalable, native tissues such as bones, tracheas and organs.
25.07.2023Specific nerves may be stimulated artificially, for example to treat pain. The finer the nerves, the more difficult it is to attach the required electrodes. Researchers have now developed flexible electrodes produced with 4D printing technology. On contact with moisture, they automatically fold and wrap themselves around thin nerves.
07.07.2023Researchers develop and test highly efficient, environmentally friendly and stable antimicrobial (antibacterial, antiviral, antifungal) coating technologies in the NOVA project.
26.06.2023Scientists at the Max Planck Institute for Intelligent Systems in Stuttgart have developed a magnetically controlled soft medical robot with a unique, flexible structure inspired by the body of a pangolin. The robot is freely movable despite built-in hard metal components.
23.06.2023Researchers from Empa and ETH Zurich have developed a plaster with a sensor function to ensure that wounds in the abdomen remain tightly closed after an operation.
23.06.2023The UPC’s Biomaterials, Biomechanics and Tissue Engineering Group (BBT) leads the international project Bio-TUNE, which aims to develop multifunctional materials with high antibacterial potential and efficient tissue integration.
13.06.2023Treating large-area and internal wounds and promoting their often protracted healing remains a challenging task for medicine. Researchers at the Fraunhofer Institute for Silicate Research (ISC) and the Fraunhofer Institute for Toxicology and Experimental Medicine (ITEM) have developed the bioresorbable membrane RENACER®.
02.06.2023Using a newly developed method for the efficient and cost-effective production of biocompatible microfibres, the production of autologous skin and organs can be significantly accelerated. Responsible for the development are Carole Planchette and her team from TU Graz.
29.05.2023A group of Computer Scientists from the Max Planck Institute for Informatics in Saarbrücken, Germany, and the University of California at Davis, have invented a process that relies solely on the shape of the object for a time-controlled release.
26.05.2023An international research team led by the german University of Jena has now developed a promising approach to significantly reducing blood clotting on the heart valve material titanium.
12.05.2023Materials made of spider silk can be specifically modified or processed in such a way that living cells of a certain type adhere to them, grow and proliferate. This has been discovered by researchers at the University of Bayreuth under the direction of Prof. Dr. Thomas Scheibel.
10.05.2023Scientists at the Fraunhofer Institute for Biomedical Engineering IBMT have been working with international partners to develop a technology platform to help relieve the symptoms of muscle tremors.
08.05.2023An interdisciplinary team of scientists in Dresden developed novel bio-inspired sugar-based molecules that show potential to improve bone regeneration.
28.04.2023With the help of computer models, researchers have discovered that a specific surface structure (biomolecular corona) is crucial for the passage of plastic particles into the brain.
26.04.2023A nanocellulose wound dressing that can reveal early signs of infection without interfering with the healing process has been developed by researchers at Linköping University, Sweden.
24.04.2023In a new study published in Proceedings of the National Academy of Sciences, University of Pittsburgh researchers developed a novel approach that promoted bone regeneration in mice without implantation of bone tissue or biomaterials.
17.04.2023The health care system and its activities consume a lot of resources. The COVID-19 pandemic has exacerbated the existing problem due to the increased need for hygiene and protective equipment. Urgent action is needed to protect the environment and combat climate change by reducing consumption and improving resource efficiency.
10.04.2023Ioana Slabu from the Institute of Applied Medical Technology and Benedict Bauer from the Institut für Textiltechnik of RWTH Aachen University have developed a novel technology for the therapy of hollow organ tumours, which was awarded second place in the RWTH Innovation Award.
05.04.2023Through ReWIRE, next-generation scientists will be trained to develop translational breakthrough therapeutic solutions for patients with paralysis caused by traumatic spinal cord injuries.
03.04.2023Most of the time, when someone gets a cut, scrape, burn, or other wound, the body takes care of itself and heals on its own. But this is not always the case. Diabetes can interfere with the healing process and create wounds that will not go away and that could become infected and fester.
24.03.2023Researchers at ETH Zurich, Empa and EPFL are developing a 3D-printed insole with integrated sensors that allows the pressure of the sole to be measured in the shoe and thus during any activity.
10.03.2023Researchers at the Translational Center for Regenerative Therapies TLC-RT of the Fraunhofer Institute for Silicate Research ISC want to work with partners to replace animal testing.
03.03.2023Synthetic hydrogels were shown to provide an effective scaffold for neuronal tissue growth in areas of brain damage, providing a possible approach for brain tissue reconstruction.
27.02.2023Georgia Institute of Technology researchers have found a way to use small shocks of electricity to disinfect water, reducing energy consumption, cost, and environmental impact.
17.02.2023Scientists from the Micro, Nano and Molecular Systems Lab at the Max Planck Institute for Medical Research and the Institute for Molecular Systems Engineering and Advanced Materials at Heidelberg University have created a new technology to assemble matter in 3D.
13.02.2023The ability of gold particles to reflect light in different colours is used in applications from stained glass to pregnancy tests. Now researchers are set to exploit the same properties in an ultra-fast sensor for the coronavirus.
10.02.2023Fraunhofer researchers have succeeded in using the bioresorbable silica gel Renacer to produce an electrospun membrane that is neither cytotoxic to cells nor genotoxic.
06.02.2023A collaborative team from the Terasaki Institute for Biomedical Innovation (TIBI) has developed a contact lens prototype that is specifically designed to prevent contact lens-induced dry eye (CLIDE).
25.01.2023Imagine if a t-shirt could analyze sweat, potentially alerting the wearer to any health abnormalities. Well, this is now closer to reality thanks to a research group's recent innovation.
03.01.2023Particularly in hospitals, a lot of waste is generated due to the large number of disposable products. In the case of cardiac catheters, this is doubly annoying, as they contain precious metals such as platinum and copper. A pilot project has therefore been launched at the Heart and Diabetes Center NRW to return used catheters to the raw materials cycle.
21.12.2022Researchers from the GSI Helmholtzzentrum für Schwerionenforschung now have proven in a paper published in the “International Journal of Environmental Research and Public Health” that face masks - both FFP2 and surgical masks - strongly reduce lung exposure and thus the dose.
20.12.2022Using a new analytical method, Empa researchers have tracked viruses as they pass through face masks and compared their failure on the filter layers of different types of masks.
15.12.2022Researchers from the Bioengineering and Biomaterials Laboratory of Universidad Católica de Valencia (UCV) have developed a new porous material capable of regenerating bones and preventing infections at the same time.
12.12.2022Producing infection control clothing requires a lot of energy and uses lots of material resources. Fraunhofer researchers have now developed a technology which helps to save materials and energy when producing nonwovens.
19.08.2022Researchers at Karolinska Institutet in Sweden and the Swedish University of Agricultural Sciences have discovered that spider silk proteins can be fused to biologically active proteins and be converted into a gel at body temperature.
08.06.2022We are nowadays already able to weave implants out of artificial fibers that can replace tissue or heal injuries. Different materials like polymers or nitinol are used to create flexible shapes. But the materials and their uses can still be improved.
01.03.2022The COVID-19 pandemic forced the use of disposable face masks. Discarding them has become an environmental challenge on a global scale. This has prompted the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT to develop an innovative recycling process for used plastics.
01.03.2022Medicine produces a lot of waste through medical consumables like protective gear or laboratory equipment. All of this gets destroyed due to hygiene reasons after use, but it is nonetheless true: Our resources are not unlimited and medical waste is a burden for the environment, too.
01.03.2022The COVID-19 pandemic has prompted a global increase in healthcare commodities and medical consumables: demand for face masks, gloves, protective apparel, and other personal protective equipment has soared as a result. This also applies to rapid tests, reagents, laboratory equipment and supplies. But all this sparked a myriad of problems.
31.08.2021Scientists use the adhesive capabilities of mussels as a model for optimizing hydrogels’ mechanical properties.
29.07.2021An MSU-led team is developing an inexpensive biopolymer dressing to heal injuries like diabetic foot ulcers that affect millions of patients all over the world.
02.07.2021A new biocompatible polymer-based composite material could soon replace metal plates in treating difficult and unstable fractures. Developed at KTH Royal Institute of Technology in Stockholm, the newly-developed material is as strong as dental composites yet non-toxic.
01.07.2021When auxiliary means like orthoses or prostheses do not come from the shelf, but are adapted to the wearer, this means true crafting: In the past, a plaster mold of a body part had to be made as a template to create an individual aid from it step by step. Fortunately, we have come a long way until today.
01.07.2021Creating custom-made medical devices to target individual patient needs: that is the core function and primary objective of orthopedics. Using 3D printers for this will make sense in the future. Luxinergy is an innovative Austrian technology company that specializes in the development of biocompatible resins and large-format 3D printers.
28.06.2021In December 2017, Purenum GmbH started its business as a spin-off of Fraunhofer IFAM. Its mission is to develop biomimetic adhesives for use in medical technology.
07.06.2021Lower leg fractures put a great strain on patients due to their long healing process. In the future, an intelligent implant could control how the bone grows together again and thus optimize the healing process. In our video, you can learn from the developers at Saarland University how this works and what role artificial intelligence plays here.
03.02.2021Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
01.02.2021Therapies need to be carried out with high reliability by trained personal. This will not change in the future. But maybe we will be able to let systems in the patient’s body do some of the work. Some approaches are already aiming to make implants more independent so they will be able to flexibly react to changes. Read more in our Topic of the Month!
01.02.2021Today we use implants to stabilize or compensate for injuries inside the body and to aid in the healing process. Implants cannot act autonomously and treat the patient if they deem it necessary. However, it is just a matter of time before this happens because research on intelligent implant materials that respond to stimuli is on the cusp of a breakthrough.
13.01.2021A rapid, evidence-based review summarizes the effectiveness of cloth masks in protecting health care clinicians from respiratory viral infections, such as COVID-19. Nine studies were included in the review, and all but one were conducted prior to the COVID-19 pandemic.
01.12.2020Implants, prostheses and various other components made of plastic, metal or ceramics are already being produced by additive manufacturing. But skin, blood vessels or entire organs from the printer – is that possible? For years now, intensive research has been underway into the production of biologically functional tissue using printing processes. Some things are already possible with bioprinting.
02.11.2020Whether it is hospitals or care homes - the right hygiene tools are crucial for process efficiency. These products can be composed of a wide variety of materials. NORAFIN offers a sustainable solution with products made from nonwoven fabric.
01.07.2020When it comes to their environmental impact, hospitals present a challenge, yet can boost opportunities at the same time. They are an environmental burden due to a higher energy use resulting from frequently outdated technology. However, once they are modernized and switch to a sustainable concept, they can turn into a "green hospital".