05.12.2024
Ultrasound, once primarily used for imaging, is emerging as a precise and non-invasive tool for brain research and therapy. Researchers from the University of Plymouth, Stanford University, and Attune Neurosciences highlight its potential in a new PLOS Biology article, detailing its applications and challenges.29.11.2024
Researchers at the University of California San Diego have developed a clinically validated, wearable ultrasound patch for continuous blood pressure monitoring. Published in Nature Biomedical Engineering, this technology offers a noninvasive, reliable alternative to traditional methods, such as arterial lines and blood pressure cuffs, with applications in both clinical and home settings.22.11.2024
Robot-assisted heart surgeries traditionally require an assistant to ensure the surgeon has adequate room to maneuver the robotic arms through small incisions. To address this dependency, researchers from Osaka Metropolitan University have developed a surgical field expansion plate that offers surgeons greater independence during procedures.22.11.2024
With “WalkON”, the Technical University of Munich (TUM) has developed robotic shorts that support people when walking and jogging by reducing the amount of energy required. The wearable technology, which can increase mobility and quality of life, is intended to benefit older people or people with health problems in particular.08.11.2024
A team at The University of Texas at El Paso, led by Dr. Xiujun Li, has developed a portable, low-cost device that detects colorectal and prostate cancer in under an hour. Designed for accessibility, this biochip could provide life-saving early detection for patients in rural and underserved areas.17.10.2024
Automated packaging systems can make medication intake much easier. Patients who have to take several tablets at different times of the day often face the challenge of dosing their medication correctly. Incorrect doses can have serious consequences.19.09.2024
Engineers at the University of California San Diego have developed a sweat-powered finger wrap that monitors vital health biomarkers such as glucose, lactate, vitamin C, and levodopa. This wearable device utilizes sweat from the wearer’s fingertip for both power and health monitoring, making it a convenient and non-invasive tool for personalized health tracking.03.09.2024
Blood pressure monitoring technology is evolving rapidly, with various non-invasive methods available on the market. But many of the existing devices measure relative changes in blood pressure rather than providing precise, absolute readings. The startup Esperto Medical uses resonance sonomanometry to deliver accurate, real-time blood pressure measurements.06.08.2024
In the rehabilitation process, it is important to get patients mobile again as safely and effectively as possible. Walking aids are often used to regain mobility, but these are also associated with a risk of injury from tripping or falls due to equipment issues. The STEETS support can make the use of walking aids safer.10.07.2024
Researchers at the Max Planck Institute for Biological Cybernetics have developed a new method for cost-efficient medical imaging. This method combines low-field magnetic resonance imaging (MRI) with hyperpolarization and artificial intelligence to improve image quality.03.07.2024
Hannover Medical School (MHH) is leading the RACOON-RESCUE project, which aims to open up new diagnostic possibilities for non-Hodgkin's lymphomas in children and adolescents with the help of automated image data analysis from CT and MRI. The project, led by Prof. Diane Renz, aims to determine disease stages more precisely and optimize therapy follow-up.12.06.2024
A team at the University Hospital Bonn (UKB) has established a modern method for the cryopreservation of ovarian tissue known as vitrification. This technique is used to preserve fertility before cancer therapies.06.06.2024
The introduction of the Da Vinci Single Port (SP) system enables the Mainz University Medical Center to expand its field of application for minimally invasive surgery in general surgery as well as visceral and transplant surgery. Robotic-assisted surgery improves medical practice through the use of state-of-the-art technology that enables more precise and less invasive procedures.16.05.2024
The new sensor from Fraunhofer IPM measures the oxygen content in the air we breathe precisely and quickly, which significantly improves patient monitoring.30.04.2024
MRI-integrated proton therapy (MRiPT) marks a significant advance in cancer treatment by increasing the precision of radiation treatment. In an interview with MEDICA.de, Prof. Aswin Hoffmann presents current technological challenges and highlights the potential benefits of real-time MRI imaging for proton therapy.01.03.2024
Gastrointestinal cancers (GCs) pose a significant health challenge worldwide, with early detection being crucial for effective treatment and improved survival rates. To address this need, scientists have developed a new imaging device aimed at enhancing the accuracy and accessibility of GC screening programs.15.02.2024
Discovering new methods to enhance the recovery process for ventilated intensive care unit (ICU) patients is crucial in improving their overall outcomes. A recent study conducted in Tokyo, Japan, sheds light on the efficacy of early mobilization, supported by mobile patient lifts, in facilitating patient recovery.05.02.2024
Researchers at the University of Birmingham have unveiled an innovative diagnostic device for the rapid detection of traumatic brain injury (TBI). This groundbreaking technology employs a safe laser directed into the eye, offering a distinct approach to diagnosing TBI.15.12.2023
After an operation, many patients undergo rehabilitation with physiotherapy. However, they often suffer from severe pain, especially at the beginning, which can also impair movement sequences during physiotherapy. Cold therapy as a pre-treatment can alleviate the pain and improve the success of the therapy afterwards.13.11.2023
Electric current and magnetic waves have long been used to treat various illnesses. One of the pioneers of this method is the Czech company Biomag Medical. Their devices produce pulsating magnetic waves that can be used to treat the target region in the body more precisely. We took the opportunity at MEDICA 2023 to find out more about this technology in our video interview.10.11.2023
Hannover Heart Rhythm Center at MHH implants Germany's first innovative defibrillator with an electrode under the sternum.03.11.2023
SiriusXT Ltd, an Irish technology SME, announced the world’s first commercial deployment of the SXT-100, the company’s unique table-top Soft X-ray Microscope with applications in disease research and the drug discovery process, at the UCD Conway Institute of Biomolecular and Biomedical Research at University College Dublin.31.10.2023
With novel technology and the integration of artificial intelligence, a new MRI scanner promises to significantly improve medical imaging. The scanner is characterized by its high performance and enables a more precise analysis of image data by means of an AI functionality.10.10.2023
A research team of scientists has jointly launched the DAIOR project ("Distributed Artificial Intelligence for the Operating Room"). Within the framework of the project, the project partners are working on realizing the operating room (OR) of the future with help of artificial intelligence (AI) and robot assisted telemedicine.02.10.2023
When the Australian company Rapid Response Revival Research Limited (RRR) came to MEDICA for the first time, they were still a start-up with a prototype. In 2023, they are returning with a full-grown product that has sold 10,000 units in less than a year. Their CellAED is a miniature automated defibrillator that can be kept close in case sudden cardiac arrest occurs somewhere.20.09.2023
MIT researchers developed a generative-AI-driven tool that enables the user to add custom design elements to 3D models without compromising the functionality of the fabricated objects. A designer could utilize this tool, called Style2Fab, to personalize 3D models of objects using only natural language prompts to describe their desired design.18.08.2023
New UBC Okanagan research takes aim at improving diagnostic imaging04.08.2023
Physicists at the University of Würzburg have succeeded in making a new imaging technique ready for use on humans. Radioactive markers and radiation are not necessary for this.03.08.2023
In the “ForNeRo – Seamless and Ergonomic Integration of Robotics into the Clinical Workflow” research network, researchers from FAU and five other research institutions and five companies are developing methods for integrating robotic assistance systems for surgical applications using intuitive interfaces in the operating room.30.06.2023
Using microfluidics, flow cytometry and electrical impedance, Sarah Du recently received a patent from the United States Patent and Trademark Office for a novel invention that will offer patients a better way to manage their disease.26.06.2023
Scientists at the Max Planck Institute for Intelligent Systems in Stuttgart have developed a magnetically controlled soft medical robot with a unique, flexible structure inspired by the body of a pangolin. The robot is freely movable despite built-in hard metal components.22.06.2023
Researchers from the Biomechanics and Ergonomics research group of the Universitat Jaume I, the Abdomino-Pelvic Oncology Surgery Referral Unit (UR-COAP) of the General University Hospital of Castelló and the Fisabio Foundation have developed an atraumatic uterine manipulator for minimally invasive gynaecological surgery.09.05.2023
Metabolic disorders play a central role in many common conditions, including Alzheimer's, depression, diabetes and cancer, which call for reliable as well as non-invasive diagnostic procedures.11.04.2023
The polymerase chain reaction, or PCR, plays a major role both in the diagnosis of infectious diseases and in research. Since the onset of the COVID-19 pandemic, the term has become widely known. At MEDICA 2022, the BLINK AG from Jena, Germany, presented the BLINK Beads, a technology that is bound to revolutionize the applications of PCR.27.03.2023
The researchers of Fraunhofer IZM have integrated a miniature radar system into an LED ceiling light that can track and recognize movement patterns and locate people or objects in a room.20.03.2023
Sarcopenia is a degenerative disease characterised by a pathological decrease in muscle strength that particularly affects older people. Researchers at the University of Barcelona have developed a new tool to assess the presence and severity of this muscular deterioration.17.03.2023
A new ultrasound method that can measure the level of tension in human tissue for the first time - a key indicator of disease - has been developed by researchers from the University of Sheffield.09.03.2023
The Fraunhofer Heinrich-Hertz-Institut (HHI) is part of the EU project TEF-Health (Testing and Experimentation Facility for Health AI and Robotics), which aims to establish a test infrastructure for artificial intelligence (AI) and robotics in healthcare.07.03.2023
Good design not only pleases the eye or the hand. It also guarantees intuitive and safe use and a long service life. Especially in medical technology, this can make a big difference – for staff as well as patients. Medical designers are therefore in great demand. At MEDICA 2022, we talked to two of them about their profession.27.02.2023
Until now, robots have assisted surgeons in the operating room to enhance their capabilities. CASCINATION is a Swiss medical device company who has teamed up with MED-EL – the Innsbruck-based hearing implant company – to develop a system that can perform an autonomous cochlear implantation. Since then, HEARO has been successfully used – including at the Medical University of Vienna (MedUniWien).24.02.2023
Changing the tune of hospital medical devices could improve public health, according to researchers at McMaster University and Vanderbilt University.20.02.2023
Singapore robotics firm AiTreat will be embarking on a new product evaluation in the United States for their massage robot powered by Artificial Intelligence (AI) at Mayo Clinic, USA.17.02.2023
Scientists from the Micro, Nano and Molecular Systems Lab at the Max Planck Institute for Medical Research and the Institute for Molecular Systems Engineering and Advanced Materials at Heidelberg University have created a new technology to assemble matter in 3D.17.11.2022
At MEDICA 2022, you can see why smart assistants are needed in the laboratory and which gadgets have made it into everyday laboratory work, thus reducing the workload of the specialists there and increasing efficiency.15.11.2022
Several Fraunhofer institutes present their latest technology in the field of medical technology and health at MEDICA 2022. Automation processes, polymers and digital networking are just some of the topics to be found at the stand. We talked to some of the institutes during our highlight tour.03.11.2022
The time has come: MEDICA 2022 opens its doors! Whether start-ups, current research results from sports medicine or exciting contributions from the laboratories of this world - you will find all of this bundled at the trade fair center in Düsseldorf from November 14 to 17. For a brief overview of what visitors can expect in our forums and conferences, see our Topic of the Month.04.10.2022
The rise of robotics in medicine will result in more applications in this sector in the future. This necessitates the design of robotic systems that meet the requirements for the respective medical implementation. Scientists at the Institute of Medical Device Technology at the University of Stuttgart are developing the systems, components, sensors, and control technology to meet this demand.04.10.2022
A successful endoscopic intervention hinges on two key factors: the endoscope must have excellent maneuverability and high structural rigidity. Unfortunately, today's devices cannot meet both requirements at the same time. Tim-Lukas Habich wants to change that by bridging the gap between flexible and rigid robots.04.10.2022
Overall technical progress does not stop at the operating rooms of this world. Whether it's completely new ideas or robotic optimizations of classic methods – research teams are coming up with contemporary answers to long-standing questions using the diverse possibilities of the present day.01.10.2022
Innovative medical technology is driving the digitization of healthcare institutions and is opening a world of possibilities. This is especially the case for minimally invasive robotic-assisted surgery.01.07.2022
Most people would not immediately consider hospitals places that create a "feel-good atmosphere". And yet, the environment plays a key role in a patient’s healing process and recovery. As a leading medical and safety technology product manufacturer, Dräger Medical Deutschland GmbH knows how to create a design that blends function with comfort.01.06.2022
Returning to a sport after injury can be demanding and arduous as athletes often need to undergo lengthy rehabilitation. Yet even after they have physically recovered from their injury, some may experience mental issues that can make it difficult to return to play and competition. Exercises that combine physical and mental training and challenges in a game setting can be an effective solution.16.05.2022
Imagine being able to measure your blood sugar levels, know if you’ve had too much to drink, and track your muscle fatigue during a workout, all in one small device worn on your skin. Engineers at the University of California San Diego have developed a prototype of such a wearable that can continuously monitor several health stats—glucose, alcohol, and lactate levels—simultaneously in real-time.01.04.2022
Applications of telemedicine surged in popularity in efforts to reduce the COVID-19 infection risk for both medical professionals and patients. Unfortunately, the services typically lack a proper diagnostic option.03.01.2022
The shortage of donor organs is a major global issue. An aging population, a reluctance towards organ donation, and logistical challenges related to organ shipping play an important role in this setting. Machine perfusion can be a way to expand and preserve the donor pool for eligible transplant recipients.18.11.2021
2020 MEDICA could only take place online, 2021 it returned as an on-site event to the trade fair halls. At four days, visitors could finally experience numerous new technologies and ideas from areas like health-IT, robotics, laboratory medicine, imaging, surgery or physiotherapy and orthopaedic technology again. See our most beautiful impressions of MEDICA 2021 here!18.11.2021
Many people have delayed necessary therapies during the Corona pandemic, also in rehabilitation. But a regular treatment is especially important here to recover lost abilities and maintain existing ones. Hybrid, digital products that connect therapists and patients online can help. We learn more about this at MEDICA 2021 at the stand of Titanis Sp. z o.o.18.11.2021
The Corona pandemic has put the brakes on the medical industry worldwide through logistic problems and contact restrictions. But despite the crisis, opportunities are still created and companies are still able to develop. We learn more about this at the stand of Zimmer MedizinSysteme at MEDICA 2021.16.11.2021
Sports medicine and physiotherapy involve many different types of equipment - from cardiovascular training to joint mobilization and playful rehabilitation. You can get an insight into the different products in our photo gallery from MEDICA 2021.16.11.2021
In situations such as a pandemic, intensive care medicine is challenged as rarely before. In particular, the technical requirements must be right in order to treat intensive care patients as effectively and efficiently as possible. At MEDICA 2021, we will learn what has happened in the industry during the pandemic and where the journey is headed.15.11.2021
Operating room equipment is not limited to operating tables and surgical lights, but also includes monitors and virtual reality. All this and much more awaits visitors at this year's MEDICA. You can get an insight into the various products here.12.11.2021
In 2020, MEDICA and COMPAMED took place as pure online events due to the corona pandemic. In 2021, the fairs will be arranged as hybrid events: on-site in Düsseldorf and complemented with additional online services. We talked to Christian Grosser, Project Director Health & Medical Technologies at Messe Düsseldorf, about this relaunch.05.11.2021
When the coronavirus enters the lung, it causes massive tissue damage. Now, an international research team has been able to demonstrate for the first time, using a highly innovative X-ray technique in a non-destructive manner, that severe COVID-19 causes massive remodelling of the finest blood vessels by causing normally separate blood systems to join together with unusual frequency.01.10.2021
In the laboratory, there is some work that is time-consuming and monotonous – making it the perfect place for digital solutions such as artificial intelligence or robotics. But what work can these systems really take on in a meaningful way, in which areas of the lab are they present today, and where do they still need to be improved?01.10.2021
They have probably never been in the spotlight as much as during the pandemic: laboratories. In Germany alone, around 73 million COVID-19-tests have been evaluated since the beginning of 2020. And even away from Corona, laboratory physicians have a lot to do – blood, urine and aspirates have to be evaluated every day. That results in an enormous amount of work, just in terms of organization.01.10.2021
Unpacking and sorting of blood samples from general practitioners is a monotonous and time-consuming task. The Aalborg University Hospital has now automated the process: Up to 3000 blood samples every day are unpacked and sorted by two lab robots provided by LT Automation. Furthermore, the samples are temperature monitored and tracked, using the Intelligent Transport Boxes.02.09.2021
Philippine Genome Center Mindanao (PGC Mindanao) has partnered with Accessible Genomics, a group of volunteering scientists from all around the world to implement a low start-up cost genomic sequencing platform for laboratories in developing countries.02.08.2021
Image-guided surgery is based on medical imaging. However, past imaging technologies performed while the patient is awake cannot deliver a complete view that facilitates a visual differentiation of structures such as blood vessels and nerve tracts. In a study, scientists developed a non-invasive imaging modality that enables multiplexing, deep tissue penetration, and real-time resolution.02.08.2021
Robots in the operating theatre are no longer a rarity in certain medical fields - they support and relieve doctors and sometimes they can make operations more efficient and easier with artificial intelligence (AI). However, they are rarely found in the operating theatre during cardiological interventions.01.07.2021
Orthopedic technology involves taking a measurement of a specific body part and then creating a medical device, be it prosthesis or orthosis, that fits. While optical scanners are already used for some of these measurements, others are still performed through manual labor and craft to create molds of the body. 3D scanners are changing this.24.06.2021
Research published in the journal ACS Materials and Interfaces has provided new understanding of how false-negative results in Lateral Flow Tests occur and provides opportunity for simple improvements to be made.01.06.2021
In emergency medicine, a faster diagnosis leads to a faster treatment of the patient. Point-of-care test solutions can provide immediate on-site insights into the patient’s condition. COVID-19 adds another dimension: the devices can provide a level of security and safety – one that goes beyond intensive care.01.06.2021
The sooner diagnosis can be made during an emergency, the faster the patient receives help. While most diagnostics still take place at the hospital, emergency physicians use more and more mobile devices directly at the deployment site. This is how they can save precious time. We take a look at some point-of-care applications in our Topic of the Month.09.03.2021
Robotics has been gaining importance in many areas of life for years, not least in medicine. Robots are already being used in the operating room today, but they do not always play the leading role – a circumstance that will certainly change in the long term.08.03.2021
Things need to move fast in an emergency. Making the right call in this setting can be a challenge for emergency medical services – especially when symptoms are ambiguous, which is the case if a patient has difficulty breathing or exhibits a cardiovascular or poisoning emergency. A blood analysis is paramount to deliver a fast and accurate diagnosis. This is where mobOx comes in.17.02.2021
Artificial intelligences (AI) are able to help medical professionals detect diseases. This is based on medical data records from which the AI can draw conclusions about diseases. These conclusions are most accurate when the extraction of the data sets is directly linked to the processing.03.02.2021
Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.19.01.2021
The risk of infection with SARS-CoV-2 is particularly high indoors. This is because, in addition to smear and droplet infection, infection via aerosols that accumulate and spread in the air is also possible there. Sufficient air exchange or air purification help to prevent this. The protective canopy developed by Fraunhofer IBP also follows such an approach.11.01.2021
According to the WHO, around 600 million people worldwide suffer from chronic respiratory diseases such as asthma. Key in the fight against these diseases is therapy adherence, but many sufferers often find this difficult. The result is increased hospitalization, which ultimately comes at the expense of the healthcare system. Smart and mobile technologies could change that.16.12.2020
Large hospital complexes such as the University Hospital Bonn can save millions when they implement well thought-out energy-saving measures. Michael Körber reports how the UKB is already implementing this with the help of combined heat and power units and a comprehensive sustainability concept. Manuel Merges describes how these projects were also possible with the help of external financing.08.12.2020
If Kevin was alone in the lab at night, the next morning, the workers will not find chaos, but labeled tubes and prepared samples. Kevin is a laboratory robot developed by Fraunhofer IPA to relieve the strain on laboratory workers so that they can concentrate on the essentials: research and diagnostics.01.12.2020
Implants, prostheses and various other components made of plastic, metal or ceramics are already being produced by additive manufacturing. But skin, blood vessels or entire organs from the printer – is that possible? For years now, intensive research has been underway into the production of biologically functional tissue using printing processes. Some things are already possible with bioprinting.20.11.2020
Bringing the technology to the patient and not the other way around – that is the idea behind CardioSecur. The physician can connect the mobile ECG system to his smartphone and thus have it with him always and everywhere. We asked MD and Founder Felix Brand how this works, to what extent patients also benefit from it and why the technology is particularly useful in corona times.01.10.2020
Every year, new technologies hit the market. They expand, update, and connect hospitals and healthcare facilities. But advancing digitization not only accelerates the speed of improvements, it also uncovers problem areas that must still be fixed.15.09.2020
Some tasks in the laboratory are repetitive, need to be done extremely precise and require a lot of time. Such tasks are very tedious for humans, but they are tailor-made for robots. Such is the case with the "AutoCRAT" project at the Fraunhofer Institute for Production Technology IPT in Aachen. Here, a robotic platform is developed to produce stem cells for the treatment of osteoarthritis.08.09.2020
In a time of pandemic, the emergency departments of most hospitals are under intense pressure. Processes can get mixed up, while some systems are stretched to the breaking point. It is easy to lose track of patients, medical devices and rooms. This is where the cibX intelligent IoT solution comes in. Real-time localization and visualization enable safe and up-to-date process optimization.01.09.2020
Diagnostics, biomedical research, screening active ingredient candidates - laboratories perform many functions and must be flexible. Growing and evolving healthcare demands mean labs have to process an increasing number of samples. Modern laboratory information management systems can already support high-throughput, but a smart laboratory environment can make things even more efficient.01.09.2020
There is likely no other branch of medicine where you can find as many high-tech devices as in modern laboratories. A major part of diagnostic and biomedical research is done here. A lot of individual steps in work processes need to be followed precisely to ensure the results’ quality. Also, a lot of data is generated here.01.09.2020
Laboratories have to analyze and interpret an ever-increasing number of samples for research and diagnostic services, generating lots of data in the process. At the same time, labs are required to produce quality results and operate with speed. Processes that could once be managed using laboratory notebooks and isolated systems must become smart in the future to improve lab efficiency.24.08.2020
For the annual MEDICA trade fair, companies from all over the world assemble in Düsseldorf. The Israel Export Institute has been a part of it for the last couple of years. They present medical devices and digital innovations from different Israeli companies at their joint booth.10.08.2020
This is how a conventional ultrasound scan works: patients lie down on a table next to the ultrasound machine. A doctor uses a probe to scan the part of the body in question, while he or she looks at the pictures on a monitor. In other words, the physician either focuses on his/her hand on the patient or the monitor. The Fraunhofer IGD wants to change this process as part of the "sonAR" project.03.08.2020
No other hospital area features as much high-tech equipment as the intensive care unit. Each acute care hospital bed has four to ten devices that continuously monitor all patient vital signs and can replace nearly any organ. This creates big data that is often not used effectively. Yet it also holds promise and huge potential.03.08.2020
In recent months, its central importance for the healthcare system has become more visible in the public eye due to the corona pandemic: the Intensive Care Unit. Patients who are in a critical condition due to illness, injury or surgery are cared for here by numerous high-tech devices. In addition, more digital solutions are being introduced.01.07.2020
Each day, a hospital consumes as much energy as a small city. Medical facilities work around the clock to provide excellent patient care. Environmental protection tends to play a secondary role as high safety and hygiene standards seem to be incompatible with optimized resource utilization – but is that really the case? Green Hospitals prove that environmental sustainability is possible.01.07.2020
In times of climate change, interest in ecological alternatives and solutions has grown in the health sector, too. However, for the complex organism of a hospital this sometimes poses a great challenge. How can energy be saved despite continuous operation? To what extent are hygiene standards and waste reduction compatible? And what costs are associated with the Green Hospital?08.06.2020
Professional athletes depend on a speedy recovery from sports injuries or surgery because their livelihood depends on their physical fitness. Returning to competition too soon after injury can have negative health consequences. Standard tests are now combined with virtual reality to determine the optimal time to return to play.02.06.2020
Stroke can affect anyone – older as well as younger people. The minutes after the stroke determine whether disability or death is the result. Only if acute care, inpatient treatment and rehabilitation are carried out in a targeted and effective manner, the chances are greater that only minor damage remains or that impairments even recede.02.06.2020
If someone is having a stroke, you call an ambulance. But getting to the hospital can be time-consuming. To prevent long-term disabilities and death, patients need to be treated as quickly as possible. According to a recent study by the Charité – Universitätsmedizin Berlin, mobile stroke units play a key role in this setting.02.06.2020
After a stroke, a patient’s life depends on getting acute care at a hospital. Vital monitoring systems ensure safe and effective treatment. An innovative tomographic imaging system is designed to help prevent the patient’s risky journey to radiology and to enable bedside monitoring of cerebral blood flow.22.05.2020
Athletes not only have to be fit and stay in shape, but they also have to achieve peak performance, especially when they get ready for athletic events. Optimized and individualized performance training requires data from external laboratories and institutes. The [i/med] Sports platform from DORNER Health IT Solutions provides a complete workflow − from anamnesis to diagnostic report.04.05.2020
Surgical robots are transforming the operating room. They deliver many benefits but also present new challenges. That is why the efficient handling of robotic mechanisms must also be reflected in the respective training courses.04.05.2020
Robotic surgical systems are often used to perform minimally invasive procedures. The daVinci surgical system is still one of the market leaders and is especially well suited to perform prostatectomies, a surgical option for prostate cancer.04.05.2020
More compact, more flexibility, and more precision - these are the main characteristics developers strive for as they advance robotic-assisted surgical systems for the operating room. Several technology providers have already shown how it’s done, including the makers of the popular daVinci Surgical System. Yet for robotic-assisted systems, the sky is the limit.04.05.2020
In the operating room, minimally invasive procedures are increasingly used. Robot-assisted systems are a great help for the surgeon. They support the surgeon and are extremely precise. Through innovative research approaches, robotic systems are constantly evolving.27.04.2020
The coronavirus is pushing healthcare systems worldwide to their limits. The number of infections continues to rise – and with it the number of people who need intensive medical treatment and artificial respiration. However, the number of ventilators is limited. Solutions to support intensive care units are needed – quickly. We have taken a closer look at some of them.22.04.2020
Wearables offer practical solutions for the flexible measurement of data. The sensor from cosinuss° is worn directly in the ear and offers a precise monitoring of vital parameters.08.04.2020
The University Hospital Bonn has recently introduced an ultrasound device that's small enough to fit in your coat pocket. It's ready to use once you have connected it to a tablet or smartphone. The portable system makes bedside physical exams possible. The device primarily benefits students as it allows them to combine basic knowledge and clinical application.01.04.2020
What goes in, must not come out - and must also not cause harm to anyone working inside the lab. That's perhaps a nice way of summing up "laboratory safety" in one sentence - at least wherever pathogens are handled in biological and medical settings. The necessary laboratory safety precautions primarily depend on what is waiting "inside".23.03.2020
Germs such as bacteria, viruses or pathogenic fungi can spread from one person to another through direct contact when we shake hands or touch objects. People touch door handles and push elevator buttons in public places and constantly move in and out of spaces. Regular manual high-level disinfection is practically impossible. UVentions GmbH has found an intelligent solution for this problem.09.03.2020
Treatment of a heart attack or stroke caused by vascular occlusion must be prompt to prevent further damage to vital tissue. Unfortunately, the actual treatment is often preceded by a lengthy catheter-based procedure where the cardiologist manually guides the catheter to the affected vessel. AI might perform this task in the future.03.03.2020
Atrial fibrillation is one of the causes for a stroke and often appears without any previous indications. To reduce the risks and provide fast results, the application FibriCheck was invented. With the app it is possible to collect and measure data via smartphone camera.25.02.2020
Neurological disorders like Parkinson's are often diagnosed once the disease has already progressed to a later stage. The VAFES project was initiated to facilitate an early detection. Sensor technology and VR are used in the creation of a playful test system.22.01.2020
Patients have to undergo a gastroscopy to rule out gastrointestinal conditions. Many dread this procedure since a thin, flexible tube is being pushed through the esophagus and stomach. Ovesco Endoscopy AG has teamed up with other project partners in the nuEndo research project to develop a capsule endoscopy device that is tiny, easy to swallow and makes the test more comfortable for the patient.01.01.2020
Joints can suddenly or gradually deteriorate and lose their natural strength, whether it’s due to accidents, diseases or simple wear and tear. In some of these cases, implants of artificial joints – endoprostheses - can help. As a joint replacement, they are designed to stay in the body for as long as needed and as such improve the patient’s quality of life and mobility.01.01.2020
Surgery is required if you need an artificial joint. Patients and doctors must select the type of surgery that’s best suited and choose between robot-assisted, traditional or minimally invasive surgical approaches. Post-operative risks should be kept to a minimum, while benefits should outweigh any possible complications.02.12.2019
Our ageing society is confronted with fewer and fewer workers. One of the many consequences is a shortage of skilled nursing staff. Ambient Assisted Living should solve this problem. By equipping the living environment of elderly people or people in need of care with (technical) assistance systems, they are to be given more self-determination and security. The nursing staff also benefits.02.12.2019
Too many people in need of care and not enough health care professionals – we all know the problem. For years, research is underway to find digital solutions for AAL to support the growing number of older & sick adults. These new technologies aim to both alleviate caregiver burden and enhance everyday life of people in need of care with a minimum level of constraint whilst promoting independence.02.12.2019
Average life expectancy keeps increasing, while birth rates are declining – at least when it comes to most industrial nations. The coming decades will see a decreasing number of gainfully employed people versus more and more senior citizens and people in need of care. It's a trend that already pushes healthcare to the brink. That's why we desperately need new concepts. One of them is AAL.02.12.2019
Smart home systems are a perfect example of how technology can make our daily lives easier. The fact that they can use a tablet to adjust lighting and blinds in every room benefits older adults in more ways than one. These types of technical systems are a part of Ambient Assisted Living (AAL) and create a safe living environment for older persons.05.11.2019
Completely underestimated: The safety risks associated with the networking of different medical devices, particularly in hospitals, have so far been severely neglected. This may now change, because the German expert group CyberMed has developed a filling aid for the technical information sheet on the cyber security of medical devices, the MDS2 form.04.11.2019
Since its inception, MEDICA TECH FORUM has focused on the implementation of innovations and new technologies into clinical practice. 2019 marks the tenth year of the Forum. In honor of its anniversary, we will brighten things up a bit, as one of the focal points will highlight how optical coherence tomography (OCT) uses light to produce images.04.11.2019
Soon, the world's largest trade fair for medical technology will open its doors again: More than 5.000 exhibitors will present their newest products and ideas at MEDICA from 18 to 21 November. You will not only meet well-known companies here, but also lots of young start-ups. Or, you can visit the MEDICA forums and conferences to experience a rich program of lectures and discussions.04.11.2019
Laboratories are medicine’s secret weapon because they handle the lion’s share of diagnostics often without patients even realizing it. That’s why the continuing workforce shortage in both laboratory medicine and companies is especially troubling. The MEDICA LABMED FORUM 2019 plans to address and counteract this development.21.10.2019
Digital blood glucose measurement via a sensor on the arm, glucose values in an app and data evaluation with the help of software: diabetes experts, product specialists at Roche Diabetes Care Germany and a patient talk in our report on MEDICA.de about the future of diabetes treatment.08.10.2019
The healthcare market offers a multitude of microscopes that make cells visible to the human eye. The same applies to AI-based software for image analysis. After taking the microscopic images, scientist are faced with large volumes of scans with usually low resolution. Yet when all aspects merge together, they open up a the world of digital pathology.01.10.2019
Pneumonia, COPD or cystic fibrosis – people with such lung diseases have to consult their doctor regularly. Little children have to undergo certain measurements by the doctor, too. In order to save people`s need to visit a doctor, telemedicine offers many ways to do examinations at home.01.10.2019
The Internet of Medical Things (IoMT) plays an important role in monitoring patients in hospitals or performing measurements at home. Here medical devices are connected via cloud, where all patient measurement data are collected and analyzed. In the course of digitalization, the relevance of clouds in the medical sector is constantly increasing.01.10.2019
When the halls of MEDICA are open to the world to showcase medical innovations, one joint exhibition booth is guaranteed to attract special attention - the MEDICA START-UP PARK. The startups that present their advances in this setting are interesting to visitors and investors, yet long-time exhibitors and big businesses can also benefit from building relationships with these young companies.01.10.2019
The medical market is booming - medical ideas and visions for the future are more in demand than ever. Especially at MEDICA START-UP PARK 2019 young founders want to present their product innovations. Develop business contacts, meet investors and experience an international environment in just one place. Discover in our Topic of the Month what makes MEDICA START-UP PARK unique.09.09.2019
A 2.4-mile (3.86 km) swim, a 112-mile (180.25 km) bicycle ride and a marathon 26.22-mile (42.20 km) run – that’s the Ironman Triathlon. Triathletes like Sebastian Kienle are constantly working to push beyond their limits. At the 7th MEDICA MEDICINE + SPORTS CONFERENCE on November 20 - 21, you can meet Kienle in person.02.09.2019
In modern medicine, especially in the field of imaging, huge amounts of data are produced – so much that radiologists can hardly keep up with diagnosing the images. Artificial Intelligence could be the solution to this problem. But how exactly can it help in this task? How can man and machine work together? And what else will be possible in the future with the support of intelligent systems?02.09.2019
Radiology is a field that produces large volumes of data, which can no longer be managed without the help of intelligent systems. This is especially true when it comes to the interpretation of medical images. While this takes physicians years of training and experience, several hours of work and the highest level of concentration, AI only requires a few seconds to accomplish the same task.02.09.2019
More patients, more examinations, more CT images – in radiology there is too much work for too few physicians. CT scans are evaluated in the shortest possible time, which leads to anomalies being overlooked. Artificial intelligence, on the other hand, works with constant speed and performance, which is why radiological routine increasingly relies on its support.02.09.2019
Artificial intelligence is no longer a dream of the future in medicine. Many studies and initial application examples show that it sometimes achieves better results than human physicians. At Jena University Hospital, the work with AI is already lived practice. It is the first institution in the world to use algorithms in radiological routine to reconstruct CT images.22.08.2019
The German Medical Award will take place on November 18, 2019, as part of the MEDICA trade fair in Düsseldorf. The ceremony emphasizes the commitment to excellence in cutting-edge care for patients. Doctors, clinical centers and companies in the medical and healthcare industry can demonstrate their achievements in medicine and management in hopes of receiving the coveted award.20.08.2019
Movement, strength and coordination - after injuries as well as in healthy athletes, these three components must be intact for movements to run smoothly. At the Beta Klinik in Bonn, Dr. Markus Klingenberg, a specialist in orthopaedics, trauma surgery and sports medicine, offers neuromuscular training with a playful character that can be adapted to the patient's needs.16.08.2019
In medicine, robots are already taking over tasks that only a few years ago were exclusively in human hands. Especially in the field of rehabilitation, they will play a major role in the future. In the "RoSylerNT" project of the German Sport University Cologne, a robot arm from KUKA is being used here for training purposes. Find out why a robot is the right training partner!01.08.2019
An untreatable infection is a nightmare for physicians and potentially life-threatening to the patient. Unfortunately, more and more pathogens emerge that are resistant to drugs, especially antibiotics. We need to use our drugs smartly and come up with technical solutions as well to prevent our weapons from blunting in the future.01.07.2019
Those who integrate physical activities into their own lifestyle live healthier and more balanced. But where are the physical limits? Can health status measurements also be carried out on the road? Discover more about how sports medical examinations contribute to maintain performance and minimize health risks in our Topic of the Month.01.07.2019
Amateur and professional athletes are susceptible to sports injuries, balance disorders or deficits in motor function and posture. Prevention and the right training can help avoid these incidents, while targeted therapy can support a return to sports after an injury.01.07.2019
Stationary or mobile - competitive athletes rely on regular health assessments. They must deliver peak performance and be physically fit during competitions. But when do they reach their physical limits? Are there any devices that provide information, no matter where the test subject is located?01.07.2019
Physical activity plays a big role in today's society. Whether you are an amateur or professional athlete – incorporating exercise into your life positively impacts your mental and physical health. Ideally, sport should be fun, pressure-free and not overburden you. But can you measure individual performance and align it with sports?17.06.2019
Medical imaging techniques have developed considerably in recent decades. In addition to morphological imaging techniques more and more functional imaging techniques are used in oncology that can continously record the functions of specific organs locally and regionally in real time. These are groundbreaking for diagnostics, therapies and preoperative preparations.04.06.2019
Tendinitis, myofascial pain syndromes or fractures - shock wave therapy is a noninvasive method with no side effects that promises relief. The intensity of the shock waves can be customized to meet patients’ needs and yields fast positive results. In addition to advising doctor’s offices, clinical facilities, and universities, Kröner Medizintechnik GmbH also offers treatment, support, and care.03.06.2019
Humans are living longer than ever but still want to continue to live independently as they age. Meanwhile, our motor and cognitive abilities decline as we age, sometimes as the effects of a stroke. The number of people in need of long-term care is growing at breakneck speed. At the same time, fewer and fewer young people choose stressful careers as caregivers.03.06.2019
They work with power, precision and tirelessly. This makes robots an ideal instrument for rehabilitation. In gait or motor training, movement sequences must be repeated thousands of times so that they can be learnt anew. What tires the patient and costs the therapist's time can easily be managed by robot-assisted systems. Learn more about the possibilities of robotics in rehabilitation.03.06.2019
It takes consistent repetitions if rehab patients want to relearn skills after surviving a stroke. This requires extreme effort. The industrial sector uses robots to perform repetitive tasks or handle jobs that require strength. What has been a fixture in factories for decades is now also making its way into rehabilitation facilities.03.06.2019
For most people, enjoying a good quality of life means having the ability to move freely, safely and independently. Intensive and costly rehabilitation is needed if this is no longer an option after a stroke for example. We are introducing some projects that deliver innovative robotic solutions.08.05.2019
Atrial fibrillation is the most common type of persistent cardiac arrhythmia (irregular heart rhythm). Researchers estimate that 1.8 million Germans are presently affected by this disease. The condition is difficult to diagnose, frequently goes undetected and may result in a stroke. A new smartwatch medical app is designed to help patients detect atrial fibrillation before it’s too late.23.04.2019
According to WHO, about 251 million people worldwide had Chronic Obstructive Pumonary Disease in 2016. COPD denotes not a single, but several diseases that are caused by smoking and air pollution, among others. Patients at a later disease stage often need ventilation and are thus bound to the location of their devices.01.04.2019
A surgery already begins before the patient is lying on the operating table – namely with the planning. For example, if brain surgery is imminent, the brain must first be mapped. This makes the activity level of certain brain areas visible. Functional magnetic resonance imaging makes this possible.01.04.2019
Our brain is the command center of our body. This is where all information and impressions are collected and converted into responses and movements. Modern imaging techniques offer physicians and researchers unique insights into the actions of the human central nervous system. The functional imaging technique allows them to watch our brain in action.01.04.2019
All information from our body and the environment converges in our brain and is transformed into reactions in milliseconds. It is essential for medicine and research to know what our switching centre looks like. Functional methods are used to observe it more closely during work.01.04.2019
In an ischaemic stroke, rapid treatment is essential. In this moment good imaging data is particularly important to enable doctors to make the best possible decision for therapy. Modern CT scanners are increasingly being used to assess stroke patients because they can show the blood flow to the brain over time.01.03.2019
People suffering from lung disease temporarily need ventilator support because they are unable to breathe naturally. Mechanical ventilation is designed to ensure the survival of these patients. The goal is to adapt the ventilator settings and tailor them the patient's specific needs and prevent lung tissue damage.01.03.2019
COPD affects more than 200 million people in the world. Those affected by this chronic pulmonary disease are often slow to notice the symptoms and get a medical diagnosis. This results in secondary complications and high medical costs. That's why an early diagnosis, comprehensive treatment, and frequent monitoring are very important. Various devices and tools support this all-round care.01.03.2019
COPD is considered the third most common cause of death worldwide and mainly affects smokers. It is not curable, but with the right combination of early diagnosis, therapy and self-management, a significant part of the quality of life can be regained. The comprehensive care is supported by various devices and technical tools. Learn more about the all-round care of COPD in our Topic of the Month.01.03.2019
Coughing, airway obstruction, difficulty breathing: Chronic obstructive pulmonary disease (COPD) is an umbrella term used to describe progressive and currently incurable lung diseases. The innovative solutions of Philips Respironics help patients to manage each stage of the disease and their medication intake, train the respiratory system and provide respiratory support.22.02.2019
According to the WHO, ten percent of babies worldwide are born prematurely. Since most organs of these tiny babies have not fully developed yet, it can quickly lead to complications and disorders and most notably affect the lungs of the premature infants. What's more, infections require gentle treatment, as the preemies themselves are fragile and susceptible – making this a challenging situation.13.02.2019
In conventional radiotherapy, the tumor is first localized using CT and MRT images in order to calculate the irradiated areas. The major drawback in this case: the subsequent radiation only shows bone structures in the body but not the tumor itself. As a result, the radiated area is often larger than necessary. In our video you will learn how the MR-Linac can be used for more precise radiotherapy.01.02.2019
The liver, nervous tissue or the intestines: all are important human organs that have in the past been tested for their function and compatibility using animal or in vitro test methods. In recent years, TissUse GmbH, a spin-off of the Technical University of Berlin (TU Berlin), has launched multi-organ chip platforms. But that’s not all.01.02.2019
So far in vitro methods and animal experiments have been used to determine the causes of diseases, research therapeutic approaches and predict the effect of drugs. Organ-on-a-chip models now offer a more accurate and ethically justifiable alternative. Find out more about the models, their advantages and future developments in our Topic of the Month.08.01.2019
Parkinson's disease is a progressive nervous system disorder that primarily affects movement of patients and makes their everyday lives very challenging. It also makes regular doctor appointments and treatment sessions necessary. "TelePark" - a project that collects different movement-related parameters using sensors and apps is designed to improve the quality of life for Parkinson’s patients.02.01.2019
Monitoring blood sugar levels, counting carbohydrates, calculating insulin doses, and keeping accurate records - diabetes is a data-intensive disease that demands a lot of self-discipline and attention from the patients. Some concerns are patients neglecting to keep a food journal, "fudged" test results or calculation errors. Digital solutions help patients easily manage the large volumes of data.02.01.2019
There are 425 million people with diabetes in the world. Heart problems, kidney failure or blindness - these can all be consequences of the metabolic disease. Diabetes patients now have the possibility of being treated digitally.02.01.2019
Diabetes mellitus or simply diabetes has become very common and is often described as a lifestyle disease. More and more people are suffering from this chronic metabolic disorder. Next to established diagnostic procedures, digital retinal screening has shown to be successful - a promising technique that will also play an important role in the diagnosis of other diseases in the future.