27.08.2024
Over 2 billion rapid test (lateral flow assay) kits are produced every year, adding tens of thousands of tons of used materials to the growing global volume of medical waste. Every test kit contains around 12 grams of plastic and is designed for single use. The company Okos Diagnostics, founded in 2022, aims to reduce the waste with a sustainable rapid test solution.23.07.2024
To improve local medical care through point-of-care tests (PoCT), 80 partners from industry and research in Saxony and Thuringia have joined forces to form the DIANA (Diagnostics and Sustainability) alliance. Dr. Dirk Kuhlmeier coordinates the alliance.18.07.2024
In Germany, digital health applications (DiGA) are an important part of modern medicine. In addition to mobile apps, these also include web-based applications, software for medical devices, telemedicine platforms, VR applications and wearable sensors. It is important that they support, improve or enable healthcare through the use of digital technologies.10.07.2024
In view of the global challenges posed by environmental pollution and the need to make medical protective equipment efficient and sustainable, a team at Ilmenau University of Technology, led by Prof. Florian Puch, has developed an innovative solution: bio-based respiratory masks.28.02.2024
Delve into the world of medical technology! The whole industry will meet at MEDICA in Düsseldorf 11-14 November 2024. Experience high-tech products, meet world market leaders, hidden champions and start-ups or visit the top-class forums and conferences. Regardless what you are looking for: you will find it at MEDICA 2024!22.02.2024
Floy from Munich brings AI in imaging into practical application and is already present in numerous German radiology practices. The start-up's software is designed to support radiologists in diagnostics and prevention by reliably detecting critical incidental findings.22.02.2024
Amid global conflicts, accessing medical supplies is vital. The ICRC, dedicated to aiding millions affected, grapples with complex distribution challenges. Teaming up with ETH Zurich, they've devised new logistics solutions for efficient and timely supply delivery to crisis zones.14.02.2024
Antimicrobial textiles can curb the spread of pathogens in hospitals. On the one hand, they reduce the amount of disinfection required by staff and, on the other, they increase the protection of patients against infection. Empa in Switzerland has tested the coating of curtains with antimicrobial substances in a study.06.02.2024
A lot of energy, water and other resources are consumed in the daily operation of a hospital. At the same time, hospitals generate high CO2 emissions and a large amount of waste, which must be disposed of safely and hygienically. There is potential for hospitals to make savings here if they take a close look at their waste disposal and optimize it.05.01.2024
At MEDICA 2023, we spoke to exhibitors who advise manufacturers of digital medical devices during the authorization process or who are launching digital medical devices on the market themselves. In the video, you can find out what is particularly important in the authorization process and where the stumbling blocks lie.30.11.2023
We spoke to exhibitors at MEDICA 2023 who are driving sustainability in laboratory operations with their products. Watch the video to find out what levers are available here and which products can already be manufactured sustainably today.29.11.2023
A team led by Dr. Thomas Lang, psychology professor at Constructor University, has developed an app that patients can use to bridge waiting times to receive therapy.14.11.2023
MEDICA connects medical technology companies and their customers from around the globe. In 2023, more than hundred US companies exhibit at the US pavilion in hall 16, for example. For our highlight video tour, we paid the pavilion a visit. Join us to learn who is behind the organization of the pavilion and what some of the exhibitors are showcasing at MEDICA.14.11.2023
WOODWAY, a leader in treadmill innovation for medical rehabilitation, brings over 40 years of expertise to MEDICA 2023. They consistently deliver tailored, state-of-the-art solutions for optimal fitness and rehabilitation results. In our interview, discover WOODWAY's specialized equipment and their unique treadmill technology.13.11.2023
Topics like artificial Intelligence, automation and robotics, and sustainability are shaking the medical industry – and both MEDICA and COMPAMED reflect that. We are walking through the trade show halls of MEDICA with Christian Grosser, Director Health & Medical Technologies at Messe Düsseldorf, to talk about this: What are his impressions of this year’s MEDICA and COMPAMED?13.11.2023
Every year, the MEDICA START-UP PARK attracts a lot of visitors. Young, up-and-coming companies present their products here – often for the first time ever. This stand has already been the starting point for the success stories of some companies that are now internationally active. At MEDICA 2023, we are once again taking the opportunity to talk to promising start-ups.08.11.2023
The SmartID counterfeit-proof barcode system means anyone can use a smartphone to check a product is genuine, provided the manufacturer uses SmartID.08.11.2023
A team of researchers from Kaiserslautern and Leipzig is working on a system that automatically analyses and visualises medical data, including their uncertainties.02.11.2023
Many diseases require weekly or even daily injections of medication into the blood. To make this gentler for patients, researchers have developed a suction cup for the inside of the cheek. The suction cup allows drugs to be administered non-invasively directly into the blood. With the founding of the start-up Transire Bio, this is now to become marketable.26.10.2023
Digitization is a perennial topic in the healthcare sector. Much has been written about the opportunities and dangers. But why is progress so slow in Germany and where do other EU countries stand?17.10.2023
Researchers from Fraunhofer IZM, together with 31 partners from industry and research, have developed a stretchable and wireless patch that can be used to make it possible to conduct diagnostically relevant cardiac monitoring in everyday life.02.10.2023
When the Australian company Rapid Response Revival Research Limited (RRR) came to MEDICA for the first time, they were still a start-up with a prototype. In 2023, they are returning with a full-grown product that has sold 10,000 units in less than a year. Their CellAED is a miniature automated defibrillator that can be kept close in case sudden cardiac arrest occurs somewhere.29.09.2023
A new Dartmouth study in the journal Science Advances suggests that how well people with diabetes manage their blood sugar depends on their experience with the condition and their overall success in controlling their glucose levels, as well as on the season and time of day.26.09.2023
Cure, a healthcare innovation campus in New York City, has opened applications for its Cure Xchange Challenge, a bold initiative to incubate innovations by healthcare start-ups and entrepreneurs across disciplines and sectors to responsibly and equitably use artificial intelligence (AI) in health.30.08.2023
Stroke victims frequently face lasting disabilities. Recognizing this, the start-up "Time is Brain" has pioneered a portable device for early stroke detection. This innovation empowers doctors to tailor therapeutic decisions throughout a patient's journey, ensuring continuous, real-time brain monitoring from the moment a stroke begins.04.08.2023
Physicists at the University of Würzburg have succeeded in making a new imaging technique ready for use on humans. Radioactive markers and radiation are not necessary for this.13.07.2023
Skin diseases, chronic wounds or postoperative wounds often greatly restrict the quality of life for those affected. Improvement or healing of these conditions is usually time-consuming and costly. Terraplasma medical GmbH, a company of the Viromed Medical Group, uses cold plasma to pursue an effective approach to wound treatment.07.07.2023
A study by researchers at Mälardalen University (MDU) describes what our future healthcare industry may look like.06.07.2023
The new Nature Medicine paper by Prof. Stephen Gilbert, et. al. addresses one of the most pressing international issues of our time: How to regulate Large Language Models (LLMs) in general and specifically in health.05.07.2023
An intelligent suit is hoped to significantly improve rehabilitation after a serious spinal cord injury. The AI-supported solution will be developed over the next three years by researchers from Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU) working in collaboration with Heidelberg University and Heidelberg University Hospital.30.06.2023
Using microfluidics, flow cytometry and electrical impedance, Sarah Du recently received a patent from the United States Patent and Trademark Office for a novel invention that will offer patients a better way to manage their disease.22.06.2023
Researchers from the Biomechanics and Ergonomics research group of the Universitat Jaume I, the Abdomino-Pelvic Oncology Surgery Referral Unit (UR-COAP) of the General University Hospital of Castelló and the Fisabio Foundation have developed an atraumatic uterine manipulator for minimally invasive gynaecological surgery.20.06.2023
While the 5G cellular technology standard is becoming more widespread in the public sector, development on its successor has already started. The German Federal Ministry of Education and Research (BMBF) has launched an initiative to lay the foundations for 6G. This communications technology can also be significant for the healthcare sector.30.05.2023
A cardiovascular stent may fail after implantation. Patients with arteriosclerosis then must undergo angiography again. The condition of the stent is examined or a new stent is placed during this procedure. Barcelona-based company NIMBLE Diagnostics is now working on an easier method to monitor stents after implantation.27.04.2023
Not all advances in medical technology immediately catch your eye – take biologicals, for example. These are molecules that are biotechnologically designed for a specific application. In the German state of Baden-Württemberg, the Biologicals Development Center (BioDevCenter) and its infrastructure aim to bring them to market faster in the future.29.03.2023
Researchers from the University of Geneva (UNIGE), the Geneva University Hospitals (HUG), and the National University of Singapore (NUS) have developed a novel method for evaluating the interpretability of artificial intelligence (AI) technologies, opening the door to greater transparency and trust in AI-driven diagnostic and predictive tools.07.03.2023
Good design not only pleases the eye or the hand. It also guarantees intuitive and safe use and a long service life. Especially in medical technology, this can make a big difference – for staff as well as patients. Medical designers are therefore in great demand. At MEDICA 2022, we talked to two of them about their profession.20.02.2023
Singapore robotics firm AiTreat will be embarking on a new product evaluation in the United States for their massage robot powered by Artificial Intelligence (AI) at Mayo Clinic, USA.15.02.2023
Gattefossé, InProcess-LSP, Knauer, Microfluidics, Skyepharma, and the University of Graz join the RCPE-led European Consortium for Continuous Pharmaceutical Manufacturing (ECCPM) to jointly develop a modular, flexible toolkit to advance industrial-scale production of lipid nanoparticles.20.01.2023
Imperial researchers have developed a low-cost, easy-to-manufacture stabiliser for broken bones to help in regions where such devices are expensive or in short supply and people sometimes resort to homemade options.16.01.2023
How far along is the digitization of the German healthcare system at the moment? It is an interesting question for both users and patients who can benefit directly from digitization and providers who plan to complement the German healthcare market with digitization products and solutions.16.01.2023
The German Center for Cardiovascular Research is centralizing its biospecimens collections, which are currently stored at 60 sites. Therefore, it is looking for two biobanks as scientific cooperation partners. Applications are now open to all German biobanks.11.01.2023
The EU project TEF-Health aims to test and validate innovative artificial intelligence (AI) and robotics solutions for the healthcare sector and accelerate their path to market.09.01.2023
A newly developed rapid test needs only a few seconds to reliably detect pathogens such as SARS-CoV-2. It is based on specially designed magnetic nanoparticles.04.01.2023
License agreement and joint development: Fraunhofer MEVIS commences cooperation with Israeli partner for worldwide use of innovative software technology in ultrasound-aided tumor ablation.20.12.2022
Using a new analytical method, Empa researchers have tracked viruses as they pass through face masks and compared their failure on the filter layers of different types of masks.12.12.2022
Producing infection control clothing requires a lot of energy and uses lots of material resources. Fraunhofer researchers have now developed a technology which helps to save materials and energy when producing nonwovens.28.11.2022
Up to now, the detection of epileptic seizures has been difficult and – especially in the case of minor seizures – inadequate. This is about to change with monikit. In the future, the sensor device and artificial intelligence will be used to collect comprehensive data and thus improve the care of those affected.17.11.2022
Robots have already been part of our everyday live for some time now, whether in our private life or at many workplaces. But how can the automatic helpers be helpful as an assistant in everyday hospital life? We got to know some great ideas at MEDICA 2022.16.11.2022
Instead of bringing the patient to the X-ray unit, would it not be better to bring the X-ray unit to the patient? Solutions for tomorrow is a med-tech company creating innovative products that change the X-ray experience for hospitals, clinics and patients. At MEDICA 2022, we took a look at it.16.11.2022
Finally MEDICA is back and the halls are full! We wanted to know what makes the trade fair so special and interesting for visitors and why you should definitely make the trip to Düsseldorf. You can read the best answers in our photo gallery.15.11.2022
Henkel is a name that many do not necessarily associate with medical technology. Nevertheless, the company can make an important contribution to digital healthcare. In our video interview, we find out what exactly this contribution looks like and why Henkel is exhibiting at MEDICA 2022.15.11.2022
The world of medicine meets again at MEDICA. A variety of high-quality, innovative products and exciting presentations as well as discussions in the forums make it a great event. This year, the trade fair again offers new ideas and developments on an international level. You can get a small insight in our photo gallery.02.11.2022
Watching your diet based on various health issues can sometimes be tiring. To make the process easier and help patients to monitor their intake, the start-up Doinglab developed an artificial intelligence technology that can recognize and understand food. FoodLens provides detailed information about the food with just a picture.18.10.2022
To treat musculoskeletal disorders physical therapy is often essential to help patients suffering from chronic pain. But following a patient’s progress in physical therapy can be difficult without a matching tool. To improve rehabilitation and further personalize treatment, DyCare developed a digital rehabilitation platform called ReHub.10.10.2022
The KIMEDS project aims to develop an AI-supported safety solution across the entire lifecycle of medical software to shorten the time from development to certification of innovative medical technology. The goal is to provide best medical care for patients, prompting a close project collaboration between science, industry, and regulatory authorities.07.10.2022
UNISONO aims to develop a novel system combining an ear-worn sensor with speech recognition.04.10.2022
Virtual clinical trials can be accomplished a lot faster and conducted with more flexibility for patients than in real life. The start-up Virtonomy takes these clinical trials to the next level with the software v-Patients. With v-Patients, a digital twin can be constructed and used in silico clinical trials.01.09.2022
Start-ups are the innovation drivers in the medical market. But a good idea alone is not enough. In our topic of the month September, three representatives tell us what hurdles there are on the way to market establishment and tips on how up-and-coming founders can circumvent some of them.01.09.2022
How and, above all, where do we want to age? Preferably within our own four walls, surrounded by our loved ones. How technology can help us feel safe in the process? Busto Automatika specializes in smart home applications and is not only available to help relatives with advice and technology.01.09.2022
A platform that already provides a basis so that healthcare providers can more easily implement the development and provision of digital solutions. In this interview, CEO Marzio Ghezzi explains the difficulties that the European healthcare market poses for a globally oriented start-up like Mia-Care and why a successful feedback system is indispensable for him.24.08.2022
A team led by Dr. Maximilian Kückelhaus and Prof. Tobias Hirsch from the Centre for Musculoskeletal Medicine at the University of Münster has carried out the first completely robot-supported microsurgical operations on humans.01.07.2022
In addition to medical care, the recovery of patients in the hospital is a key factor. In order for this to take place in the best possible way, the focus in the planning phase should also be on optimal workplace design for medical staff. How can the balancing act between design and functionality be achieved and what will the hospital of tomorrow look like?01.07.2022
When we think of modern hospitals, we often think of high-tech medical devices, patient beds surrounded by machines, or networked operating rooms. Yet it is not only the equipment in patient rooms that leads to a better and faster recovery. A hospital that delivers a positive experience for patients, their families, and medical staff centers on smart design from the very beginning.01.04.2022
Concrete diagnoses are the be-all and end-all in medicine. The Corona pandemic made the conditions for good diagnostics more difficult. Telemedicine offers an alternative - not only in times of pandemic. It is important to exploit the full potential of technical possibilities. Robot-assisted examinations and artificial intelligence can make an important contribution to symptom recognition.01.03.2022
Medicine produces a lot of waste through medical consumables like protective gear or laboratory equipment. All of this gets destroyed due to hygiene reasons after use, but it is nonetheless true: Our resources are not unlimited and medical waste is a burden for the environment, too.01.03.2022
The COVID-19 pandemic forced the use of disposable face masks. Discarding them has become an environmental challenge on a global scale. This has prompted the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT to develop an innovative recycling process for used plastics.15.02.2022
For nearly two years, the COVID-19 pandemic has kept a firm grip on the world and caused many intensive care units to hit full capacity. It would help medical professionals tremendously if they could make a reliable prognosis the moment patients are hospitalized. cfDNA screening could play an important role in the assessment of COVID-19 severity in patients.11.01.2022
There are many factors to consider when you plan to enter the medical market in another country. Every country requires different market entry strategies – and countries in Africa are no exception.22.11.2021
Orthopedic auxiliary means are mostly still produced in manual labor today. But orthopedic technology is also trying out new ways by using tools like 3D scanners, digital models and 3D printing. Nadja Singer from Ottobock explains in our video interview how this changes the production of auxiliary means.18.11.2021
The Corona pandemic has put the brakes on the medical industry worldwide through logistic problems and contact restrictions. But despite the crisis, opportunities are still created and companies are still able to develop. We learn more about this at the stand of Zimmer MedizinSysteme at MEDICA 2021.18.11.2021
2020 MEDICA could only take place online, 2021 it returned as an on-site event to the trade fair halls. At four days, visitors could finally experience numerous new technologies and ideas from areas like health-IT, robotics, laboratory medicine, imaging, surgery or physiotherapy and orthopaedic technology again. See our most beautiful impressions of MEDICA 2021 here!18.11.2021
Internationality, fresh ideas and innovative developments – MEDICA 2021. Exhibitors from all over the world contribute to making the trade fair an exciting event with high-quality and sophisticated products every year. Get an insight into the impressions and experiences of the exhibitors is this photo gallery.17.11.2021
This year, MEDICA 2021 can once again look forward to many visitors. We asked some visitors why they visit the fair, for how many years they have been coming here and what they particularly appreciate about MEDICA. You can get to know them in our photo gallery.12.11.2021
In 2020, MEDICA and COMPAMED took place as pure online events due to the corona pandemic. In 2021, the fairs will be arranged as hybrid events: on-site in Düsseldorf and complemented with additional online services. We talked to Christian Grosser, Project Director Health & Medical Technologies at Messe Düsseldorf, about this relaunch.20.09.2021
Researchers released a new type IIR surgical mask with an intelligent fabric that can instantaneously deactivate the SARS-COV-2 virus that is responsible for COVID19.01.07.2021
Orthopedic technology is a true craft: That's because prostheses and orthoses are rarely off-the-shelf products. Orthopedic technicians must typically use different materials to custom create and fit the devices. Many of these processes are manual. For several years now, 3D scanning and 3D printing have modernized the industry thanks to digital design freedom and flexible production.22.06.2021
Data silos still prevail in the German health care system: providers store and collect patient data for their own purposes, making it not available to the entire organization. Many still mainly share this data in analog form. Comprehensive, integrated delivery networks would make many practices easier.10.06.2021
Helping hospitals in Germany build a long-term digitization strategy - that is the declared goal of the young founding team of the innovation go platform, which started at the Osnabrück University of Applied Sciences. The project is funded by EXIST, a support program of the German Federal Ministry for Economic Affairs and Energy (BMWi).22.04.2021
Behind every hospital are sophisticated and complex logistics that must run like clockwork to keep things going. But how good are the processes when it comes to managing patient care and hospital staff? There are many weak links that can be avoided. Comprehensive digitization and efficient, targeted healthcare workforce management are required to set up hospital logistics for future success.21.04.2021
In this interview with MEDICA-tradefair.com, Lina Behrens explains how Flying Health helps its clients develop new business models and gives an outlook on the future of healthcare.17.02.2021
Artificial intelligences (AI) are able to help medical professionals detect diseases. This is based on medical data records from which the AI can draw conclusions about diseases. These conclusions are most accurate when the extraction of the data sets is directly linked to the processing.03.02.2021
Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.06.01.2021
Until now, it sounded quite odd to receive reimbursement for digital health apps: There are too many and the majority has never been checked for safety and positive effects. Thanks to the "Digital Health Applications Ordinance", these apps can now reach the German market in a regulated way, physicians can prescribe them and statutory health insurance companies reimburse their use.16.12.2020
Large hospital complexes such as the University Hospital Bonn can save millions when they implement well thought-out energy-saving measures. Michael Körber reports how the UKB is already implementing this with the help of combined heat and power units and a comprehensive sustainability concept. Manuel Merges describes how these projects were also possible with the help of external financing.16.11.2020
Does the medical technology industry profit from the corona pandemic? Partly yes, but at large, it also suffers through this crisis. This is one of the topics that the industry association SPECTARIS addresses during virtual.MEDICA 2020. Marcus Kuhlmann talks about this and other topics in our video interview.02.11.2020
This year is completely different! Normally, we would offer you an advanced peek into the MEDICA’s halls in Dusseldorf at this point. But due to the corona pandemic, the trade fair takes place online as virtual.MEDICA. We nevertheless took a look at this year’s topics of special interest.28.10.2020
We asked three start-ups to shortly introduce themselves in their own words in advance to virtual.MEDICA 2020. Come take a look!24.08.2020
For the annual MEDICA trade fair, companies from all over the world assemble in Düsseldorf. The Israel Export Institute has been a part of it for the last couple of years. They present medical devices and digital innovations from different Israeli companies at their joint booth.22.07.2020
Necessity is the mother of invention: While many companies have been hit hard by the coronavirus pandemic, some were able to find the hidden business opportunities the unique situation has created. One example of how companies can benefit from the Covid-19 crisis is the production of medical protective gear.01.07.2020
Each day, a hospital consumes as much energy as a small city. Medical facilities work around the clock to provide excellent patient care. Environmental protection tends to play a secondary role as high safety and hygiene standards seem to be incompatible with optimized resource utilization – but is that really the case? Green Hospitals prove that environmental sustainability is possible.01.07.2020
The REGIOMED Klinikum Lichtenfels is the lighthouse project of the "Green Hospital Initiative Bayern" (Bavarian Green Hospital Initiative), which launched in 2014 and aims to increase energy efficiency and promote sustainability in Bavarian hospitals. Lichtenfels took things one step further by constructing an optimized new building where sustainability is an integral part.01.07.2020
In times of climate change, interest in ecological alternatives and solutions has grown in the health sector, too. However, for the complex organism of a hospital this sometimes poses a great challenge. How can energy be saved despite continuous operation? To what extent are hygiene standards and waste reduction compatible? And what costs are associated with the Green Hospital?03.02.2020
Coronary heart disease can come as a complete surprise and occur suddenly. Cardisiography was designed to lower the risk and make faster intervention possible. As a non-invasive heart screening test, cardisiography offers the possibility of early detection for heart diseases.22.01.2020
Patients have to undergo a gastroscopy to rule out gastrointestinal conditions. Many dread this procedure since a thin, flexible tube is being pushed through the esophagus and stomach. Ovesco Endoscopy AG has teamed up with other project partners in the nuEndo research project to develop a capsule endoscopy device that is tiny, easy to swallow and makes the test more comfortable for the patient.01.01.2020
Today, people tend to live longer, while an increasing number of patients suffer from osteoarthritis. Even younger generations are now at a higher risk of getting osteoarthritis due to the frequent use of mobile devices. The EU research project APRICOT aims to develop a novel type of implant for the treatment of osteoarthritis of the hands – helping patients heal themselves.02.12.2019
Smart home systems are a perfect example of how technology can make our daily lives easier. The fact that they can use a tablet to adjust lighting and blinds in every room benefits older adults in more ways than one. These types of technical systems are a part of Ambient Assisted Living (AAL) and create a safe living environment for older persons.01.10.2019
When the halls of MEDICA are open to the world to showcase medical innovations, one joint exhibition booth is guaranteed to attract special attention - the MEDICA START-UP PARK. The startups that present their advances in this setting are interesting to visitors and investors, yet long-time exhibitors and big businesses can also benefit from building relationships with these young companies.01.10.2019
The medical market is booming - medical ideas and visions for the future are more in demand than ever. Especially at MEDICA START-UP PARK 2019 young founders want to present their product innovations. Develop business contacts, meet investors and experience an international environment in just one place. Discover in our Topic of the Month what makes MEDICA START-UP PARK unique.