virtual.MEDICA 2020: Experience medicine online -- MEDICA - World Forum for Medicine

Image: Three men in a laboratory, on checks how a face mask is fitting another - Rupak Banerjee, Israel Ajiboye, Sheyash Manegaonker; Copyright: Ravenna Rutledge/UC Creative

COVID-19: better-fitting face masks greatly improve protection

18/06/2021

Even the best face masks work only as well as their fit. And poorly fitting face masks greatly increase the risk of infection from airborne pathogens compared to custom-fitted masks, according to a new study by the University of Cincinnati.
Read more
Image: Four parts made of a yellow material from the 3D printer; Copyright: Fraunhofer IPA

Stereotactic systems from the 3D printer

17/06/2021

Stereotactic systems are special devices used in neurosurgical procedures. Until now, conventional production methods have meant that these devices are not only expensive to manufacture, but are also geometrically limited.
Read more
Image: Graphic of a sole comprised of a honey comb-like structure; Copyright: Staffordshire University

Diabetes: new research a 'step change'

17/06/2021

Millions of people with diabetes are at risk of developing foot ulcers, which often lead to amputations and other health complications. Now, Scientists from the Centre for Biomechanics and Rehabilitation Technologies (CRBT) have developed a new method to reliably detect this risk without the need for complex electronic in-shoe sensors.
Read more
Image: Preview picture of video

Smart implant – Healing fractures autonomously with smart materials

07/06/2021

Lower leg fractures put a great strain on patients due to their long healing process. In the future, an intelligent implant could control how the bone grows together again and thus optimize the healing process. In our video, you can learn from the developers at Saarland University how this works and what role artificial intelligence plays here.
Read more
Image: A sheet of gold leaf cut into a circular shape next to a coin; Copyright: Adapted from ACS Central Science 2021

Gold leaf could help diagnose viral infections in low-resource settings

21/05/2021

Gold leaf - gold metal hammered into thin sheets - is used by artists and crafters to gild picture frames, artwork and clothing. Despite its luxurious appearance, the material is affordable and available at most craft stores.
Read more
Image: A female researcher in a laboratory, holding a pipette - Prof. Illana Gozes; Copyright: Tel Aviv University

Orthopedic implants: effective inflammation prevention

18/05/2021

Dental and orthopedic implants are widely used around the world. Common causes for implant failure are the immune response against oral bacteria and titanium particles shed by the implant.
Read more
Image: Drawing showing how a brain tumor surgery site is outfitted with pieces of mesh; Copyright: D. Beghetto/IIT

Microscopic polymeric network to attack glioblastoma multiforme

30/04/2021

Researchers at Istituto Italiano di Tecnologia in collaboration with Stanford Medicine and the San Raffaele Hospital have demonstrated with preclinical studies the effectiveness of a new biomedical implant for the treatment of glioblastoma multiforme.
Read more
Image: Coloured image of a bacterial cell; Copyright: Empa

Fighting harmful bacteria with nanoparticles

28/04/2021

In the arms race "mankind against bacteria", bacteria are currently ahead of us. Our former miracle weapons, antibiotics, are failing more and more frequently when germs use tricky maneuvers to protect themselves from the effects of these drugs.
Read more
Image: A man in protective laboratory equipment is taking a printed ring out of a 3D printer; Copyright: Swiss m4m Center

3D printing: Go-ahead for Swiss m4m Center

26/04/2021

The Technology Transfer Center for 3D Printing in Medical Technology – Swiss m4m Center, in short – meets the requirements of ISO standard 13485:2016; it is thus allowed to produce implants and instruments for human patients. The starting signal for promising projects with Swiss SMEs: The partner network already comprises 45 companies and research institutions.
Read more
Image: A hospital employee is cleaning an endoscope; Copyright: PantherMedia/sielemann

Medical devices: hygienic design combats pathogens

03/02/2021

Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
Read more
Image: A group of researchers is discussing a chemical structural formula in front of a whiteboard; Copyright: PantherMedia/depositedhar

Intelligent implants: when the material is the key to the solution

01/02/2021

Today we use implants to stabilize or compensate for injuries inside the body and to aid in the healing process. Implants cannot act autonomously and treat the patient if they deem it necessary. However, it is just a matter of time before this happens because research on intelligent implant materials that respond to stimuli is on the cusp of a breakthrough.
Read more
Image: Artist’s rendering of small robots with grapplers and searchlights that swim between red blood cells; Copyright: PantherMedia/Andreus

Autonomous medical technology: independently in the body

01/02/2021

Therapies need to be carried out with high reliability by trained personal. This will not change in the future. But maybe we will be able to let systems in the patient’s body do some of the work. Some approaches are already aiming to make implants more independent so they will be able to flexibly react to changes. Read more in our Topic of the Month!
Read more
Image: Illustrations of various 3D-printed prostheses, implants and organs; Copyright: PantherMedia/annyart

Printed life – possibilities and limits of bioprinting

01/12/2020

Implants, prostheses and various other components made of plastic, metal or ceramics are already being produced by additive manufacturing. But skin, blood vessels or entire organs from the printer – is that possible? For years now, intensive research has been underway into the production of biologically functional tissue using printing processes. Some things are already possible with bioprinting.
Read more
Image: Surgical utensils lying on a table in the OR; Copyright: WavebreakmediaMicro - stock.adobe.com

Sustainable Nonwoven Solutions Improve Hygiene

02/11/2020

Whether it is hospitals or care homes - the right hygiene tools are crucial for process efficiency. These products can be composed of a wide variety of materials. NORAFIN offers a sustainable solution with products made from nonwoven fabric.
Read more
Image: room in a hospital; Copyright: PantherMedia / imagesupply

How Hospitals Can Foster Environmental Sustainability

01/07/2020

When it comes to their environmental impact, hospitals present a challenge, yet can boost opportunities at the same time. They are an environmental burden due to a higher energy use resulting from frequently outdated technology. However, once they are modernized and switch to a sustainable concept, they can turn into a "green hospital".
Read more
Image:

"Spray-On" muscle fibers for biomimetic surfaces

08/01/2018

Few patients with heart failure are fortunate enough to receive a donor's heart. Ventricular assist devices (or heart pumps) have been around for several years and are designed to buy time as patients wait for a transplant. Unfortunately, the body doesn't always tolerate these devices.
Read more