We recently announced our first product, MXR. Its the first microfluidic mixer specifically designed for diagnostic consumables. As anyone who has developed a small-volume assay knows, microfluidic mixing is a universal problem in our industry.
Mixing is so obviously essential for life science assays that we rarely think about it until we discover theres a problem with our assay. It takes too long, it doesnt behave reliably, the sensitivity is poor. When we go to fix the problem, each of us solves the problem anew, with some workaround in the cartridge design.
Given how ubiquitous a problem microfluidic mixing is, the real question is why no one has offered a product like MXR before.
Its not like theres a lack of scientific work on the subject. But there are two big problems with the literature. For one thing, virtually all of the scientific work uses continuously pumped fluid instead of enclosed chambers. For another, cutting edge microfluidic technologies are virtually impossible to add to real-world consumable cartridges.Mixing with zero dead volume
First: flow-through chambers. The standard mixing demo sets up a laminar flow condition using a Y-channel, then uses the mixing tech to disperse the laminar boundary. (Even weve done it.) A whole subcategory of mixing methods—the so-called “passive” methods—require this kind of fluid motion in order to work. This dramatically reduces their utility. While their instantaneous chamber volume may be small, but the total volume isnt. This is not helpful for cartridge developers, because we have very strong opinions about the total sample volume. We also typically want our samples to stay put, because long channel runs take up space, and we want a small cartridge footprint. Also, during or after the mixing were probably going to measure something with a sensor in a fixed location. A traveling sample makes everything more complicated.
Our own work, published back in 2010 by Adam Shields and Briana Fiser et al., was a rare exception. We showed that biomimetic cilia could generate simultaneous pumping and mixing. The fluid they were pumping had to go somewhere, but because these micro-posts were in an enclosed chamber, the only place for it to go was in circles.
The punchline is that MXR makes any chamber a mixing chamber. No pumps. No plumbing. Zero dead volume.Easy integration
Second: integration. There is no shortage of novel microfluidic devices in the world. Some are even manufacturable at workable scale and cost—for example, with a micro-machined injection molding tool, or commoditized semiconductor processing methods. But while those methods scale for small microfluidic chips, are they are rarely workable for the rest of the cartridge. In other cases, the novel method requires very precise flow rate control that is substantially constrains the design of the instrument. Novel methods often require additional electrical or mechanical contacts with the cartridge. And so on.
These nagging problems were the motivation behind MXR. It makes any chamber a mixing chamber, and its packaged and ready to be added right where you need it. For diagnostic cartridges, this easy integration makes all the difference in the world.
Our aim is to wrap our arms around ubiquitous microfluidic problems, and develop generic, powerful solutions that everyone in our industry can take advantage of. With MXR, our intentions is to solve microfluidic mixing, once and for all. We cant wait to see what you do with it.
Exhibitor Data Sheet