Cycle Verification Indicators provide the most specific information of any chemical indicator available. The primary difference between these and other chemical indicators is their cycle specificity.
All TST Control™ Cycle Verification Indicators will have been calibrated to perform to the predefined parameters of a particular process, helping the end users detect process failure by confirming that all of the predetermined cycle parameters have occurred at point of placement in each tray, pack or pouch. This is demonstrated through an easy to interpret colour change.
•Conforms to ISO 11140 Class 6 Emulating Indicator (Cycle Verification Indicator)
•Yellow to Blue / purple colour change
•Non toxic. Free from lead and heavy metal salts
•Peel off self adhesive backing option
•Easy to use
•Can be placed at all points in the load, inside packs / containers
•Does not require incubation
•Manufactured to ISO 9001:2000 & ISO 13485:2003
•Range of calibrations available
•Safety margin over biological indicators
For further information please contact:
•In Europe, Middle East, Africa:
Amanda Gow, Communications Manager, STERIS Limited, STERIS House, Jays Close, Viables, Basingstoke, RG22 4AX, UK. Phone: +44 (0)1256 866571 Email: firstname.lastname@example.org
•In the US:
Robin Baum, Public Relations Coordinator, STERIS Corp., 5960 Heisley Road, Mentor, Ohio, USA, 44060.
Phone: +1 440 392 7428 Email: email@example.com
©STERIS Corporation 2006. All rights reserved. September 2006