16.02.2023A team led by Prof Claus-Michael Lehr of the Helmholtz Institute for Pharmaceutical Research Saarland (HIPS) has developed a novel human lung cell line that should enable much more accurate predictions of the behavior of active substances or dosage forms in humans than previous systems.
13.02.2023The ability of gold particles to reflect light in different colours is used in applications from stained glass to pregnancy tests. Now researchers are set to exploit the same properties in an ultra-fast sensor for the coronavirus.
03.02.2023George Mason University researchers found that computerized symptom screenings can supplement at-home COVID-19 tests to better confirm the diagnosis for patients and clinicians.
26.01.2023The underlying mechanisms of long COVID are not yet fully understood. Molecular clues to different subgroups of long COVID have now been provided by a research group at University Medicine Halle.
18.01.2023Researchers at the Helmholtz Institute for RNA-based Infection Research (HIRI) and the Julius-Maximilians-Universität (JMU) in Würzburg have developed a technology they call TIGER. It allows complex processes in individual cells to be deciphered in vivo by recording past RNA transcripts.
12.01.2023Researchers at Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU) and Julius-Maximilians-Universität Würzburg have developed a method for binding specific molecules in samples and serums, such as antibodies in the blood, to the surface of iron oxide particles thus allowing them to be identified using an inexpensive and compact detector.
12.01.2023An interdisciplinary research team from MHH has used innovative molecular methods and a high-resolution microscopy technique to show how the ongoing inflammation in COVID-19 attacks the heart tissue.
09.01.2023A newly developed rapid test needs only a few seconds to reliably detect pathogens such as SARS-CoV-2. It is based on specially designed magnetic nanoparticles.
05.01.2023With a multimodal microscope, the Laser Zentrum Hannover e.V. (LZH) and three partners in the joint project PriMe want to make it possible to detect bacterial infestation using fast, marker-free, and contactless imaging.
20.12.2022Using a new analytical method, Empa researchers have tracked viruses as they pass through face masks and compared their failure on the filter layers of different types of masks.
15.12.2022Researchers from the Bioengineering and Biomaterials Laboratory of Universidad Católica de Valencia (UCV) have developed a new porous material capable of regenerating bones and preventing infections at the same time.
12.12.2022Producing infection control clothing requires a lot of energy and uses lots of material resources. Fraunhofer researchers have now developed a technology which helps to save materials and energy when producing nonwovens.
22.08.2022A team of scientists from the Berlin Institute of Health at Charité (BIH) together with colleagues from the United Kingdom and Canada have found genes and proteins that contribute to a higher risk of severe COVID-19.
02.05.2022Disinfection and sterilization are the most reliable and best way to ensure patient safety in healthcare settings. Whether it is at the point of care when the patient is either at the hospital or medical practice, or wherever medical devices are manufactured and packaged in a sterile environment – the transmission of pathogens and microorganisms can have severe health impacts.
02.05.2022One of the most time-consuming tasks in hospitals is the manual cleaning and disinfection of high touch points and surfaces such as door handles, buttons, and switches. These are areas where microorganisms are spread by direct skin contact. The “MobDi – Mobile Disinfection” research project is developing a robot that automatically cleans and disinfects these areas. It will use cold plasma.
01.03.2022The COVID-19 pandemic has prompted a global increase in healthcare commodities and medical consumables: demand for face masks, gloves, protective apparel, and other personal protective equipment has soared as a result. This also applies to rapid tests, reagents, laboratory equipment and supplies. But all this sparked a myriad of problems.
25.01.2022Researchers at the University of Washington have developed a new test for COVID-19 that combines the speed of over-the-counter antigen tests with the accuracy of PCR tests that are processed in medical labs and hospitals.
18.01.2022The global food system today directly and indirectly impacts personal and planetary health and burdens the health care system and climate as a result. Rethinking our diet and food choices and using technology can make a lasting difference on the health of people and our planet.
10.01.2022Rapid COVID-19 tests can be rather uncomfortable as samples are typically collected with a deep nasal or throat swab. Scientists now explore an alternative to rapid diagnostic tests based on a patient’s breath.
22.12.2021Despite myriad precautionary measures, virus-contaminated aerosols still pose a serious problem indoors. An invisible protective wall of UV-C ligh could provide a solution and reliably curb the spread of viruses and other pathogens in rooms in the future while allowing total freedom of movement.
09.12.2021A potentially game-changing Antigen Rapid Test (ART) technology to diagnose COVID-19 has been developed by scientists in Singapore. Using a proprietary on-kit amplification technique, a person's saliva can be self-administered or tested for the SARS-CoV-2 virus.
05.11.2021When the coronavirus enters the lung, it causes massive tissue damage. Now, an international research team has been able to demonstrate for the first time, using a highly innovative X-ray technique in a non-destructive manner, that severe COVID-19 causes massive remodelling of the finest blood vessels by causing normally separate blood systems to join together with unusual frequency.
15.10.2021Vaccinations and tests once again enable safe gatherings during the Corona pandemic. But unfortunately, existing test technologies are not suitable for every situation: A lot of time is lost for example due to testing at schools and the workplace. Now the University Hospital Bonn has developed a new kind of test which has numerous advantages over existing technologies.
23.08.2021Researchers from Surrey's renowned Global Centre for Clean Air Research (GCARE) explore two key questions: how long a mask should be worn; and when should it be discarded, recycled or washed to optimise its usage time.
29.07.2021Scientists have developed a rapid, highly accurate test to detect antibodies against the spike protein of SARS-CoV-2 in human serum, opening a new avenue for understanding the full extent of the pandemic and evaluating the effectiveness of vaccines.
24.06.2021Research published in the journal ACS Materials and Interfaces has provided new understanding of how false-negative results in Lateral Flow Tests occur and provides opportunity for simple improvements to be made.
22.06.2021Architecture can prevent infections in hospitals. The walk-in model of a new type of patient room shows how this can be done. It was developed by a team from the fields of architecture, medicine and molecular biology in the KARMIN research project.
01.06.2021In emergency medicine, a faster diagnosis leads to a faster treatment of the patient. Point-of-care test solutions can provide immediate on-site insights into the patient’s condition. COVID-19 adds another dimension: the devices can provide a level of security and safety – one that goes beyond intensive care.
31.03.2021At the virtual.MEDICA 2020 trade fair, Prof. Dirk Brockmann delivered the keynote address in the MEDICA CONNECTED HEALTHCARE FORUM on digital epidemiology, which got a big boost thanks to the coronavirus pandemic. It can help us understand how human behavior influences the course of the pandemic.
16.03.2021Using supercomputer numerical modeling of saliva droplets' diffusion produced by coughs, researchers in Italy explore deactivating COVID-19 virus particles via UV-C light.
01.03.2021Keeping your distance, washing your hands, wearing a mask – such protective measures have been the order of the day since the SARS-CoV-2 pandemic began. But appropriate products or procedures are not suitable for everyone, are often unavailable or, despite everything, carry a residual risk. The need for new, better solutions is high. But necessity is the mother of invention.
01.03.2021Over 50% of our communication is made up of facial expressions and gestures. Nonverbal communication is especially important to deaf or hearing-impaired people or people with dementia. A conventional mask makes this more difficult, may promote miscommunication and contribute to medical errors in extreme cases. Yet it is paramount to use a mask amid this pandemic. Miama helps solve this problem.
01.03.2021All hospitalized patients are susceptible to contracting a nosocomial infection, with ICU patients being particularly at risk. The effects of these hospital-acquired infections are often more dangerous than the original reason for the in-patient hospitalization. The "PACMAN" project is now testing an antimicrobial coating for frequently used contact surfaces at high risk of pathogen transmission.
01.03.2021When urgently needed products such as masks become scarce or conventional disinfection processes reach their limits, inventiveness is called for. And there is usually plenty of it in times of crisis. What innovations has the current corona pandemic already produced? How can they supplement or even replace existing products and processes?
09.02.2021Wearable devices can identify COVID-19 cases earlier than traditional diagnostic methods and can help track and improve management of the disease, Mount Sinai researchers report in one of the first studies on the topic. The findings were published in Journal of Medical Internet Research.
08.02.2021Disinfection and masks are essential to prevent the spread of Covid-19. Swiss scientists from ZHAW and Osmotex AG have now combined the two and developed a mask that disinfects itself at the push of a button. It is to be launched on the market as early as this spring.
03.02.2021Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
27.01.2021We are all familiar with these images from some countries: Completely full intensive care units, doctors working frantically despite being ill, being forced to decide who lives and who dies due to critical shortages of respirators. How can you forecast Covid-19 impact on healthcare systems to avoid overload? Biostatistician Professor Frank Klawonn studies this issue.
19.01.2021The risk of infection with SARS-CoV-2 is particularly high indoors. This is because, in addition to smear and droplet infection, infection via aerosols that accumulate and spread in the air is also possible there. Sufficient air exchange or air purification help to prevent this. The protective canopy developed by Fraunhofer IBP also follows such an approach.
13.01.2021A rapid, evidence-based review summarizes the effectiveness of cloth masks in protecting health care clinicians from respiratory viral infections, such as COVID-19. Nine studies were included in the review, and all but one were conducted prior to the COVID-19 pandemic.
16.11.2020Does the medical technology industry profit from the corona pandemic? Partly yes, but at large, it also suffers through this crisis. This is one of the topics that the industry association SPECTARIS addresses during virtual.MEDICA 2020. Marcus Kuhlmann talks about this and other topics in our video interview.
02.11.2020This year is completely different! Normally, we would offer you an advanced peek into the MEDICA’s halls in Dusseldorf at this point. But due to the corona pandemic, the trade fair takes place online as virtual.MEDICA. We nevertheless took a look at this year’s topics of special interest.
22.07.2020Necessity is the mother of invention: While many companies have been hit hard by the coronavirus pandemic, some were able to find the hidden business opportunities the unique situation has created. One example of how companies can benefit from the Covid-19 crisis is the production of medical protective gear.
08.07.2020A key to preventing SARS-CoV-2 spread is frequent, comprehensive testing. This allows the early detection of infections and helps break the chain of infection. It always comes down to Coronavirus testing capacity. In Germany's southwest state of Saarland, the mobile epiLab (epidemiological laboratory) supports the search for infections lurking in nursing homes and long-term care facilities.
01.04.2020What goes in, must not come out - and must also not cause harm to anyone working inside the lab. That's perhaps a nice way of summing up "laboratory safety" in one sentence - at least wherever pathogens are handled in biological and medical settings. The necessary laboratory safety precautions primarily depend on what is waiting "inside".
01.04.2020Laboratories are sectioned into four biosafety levels to dictate the precautions required to isolate dangerous biological agents. The highest level of biological safety, BSL-4, is perhaps the most well-known when we think of containing pathogens and microbes. However, the fewest number of laboratories actually fall into the BSL-4 category.
01.04.2020When biomedical researchers or diagnosticians work with potentially contagious materials like cell cultures, blood or tissue, they need absolute protection from pathogens. Both safety measures in the workspace and the correct tools and materials are key here. Learn in our Topic of the Month what is important for protection in the lab and what a safe laboratory looks like.
01.04.2020When working with infectious materials and organisms in the laboratory, safe handling and appropriate training are of utmost importance. Another central component is personal protective equipment designed to prevent contact with tissue, liquids and aerosols and protect the wearer.
31.03.2020Besides hand hygiene, drinking water hygiene is also on the to-do list of every hospital. A lot of money is invested to clean water pipes and to destroy legionella germs. An alternative solution for mechanical and thermal control is water disinfection using an automatic machine.
23.03.2020Germs such as bacteria, viruses or pathogenic fungi can spread from one person to another through direct contact when we shake hands or touch objects. People touch door handles and push elevator buttons in public places and constantly move in and out of spaces. Regular manual high-level disinfection is practically impossible. UVentions GmbH has found an intelligent solution for this problem.
01.01.2020Today, people tend to live longer, while an increasing number of patients suffer from osteoarthritis. Even younger generations are now at a higher risk of getting osteoarthritis due to the frequent use of mobile devices. The EU research project APRICOT aims to develop a novel type of implant for the treatment of osteoarthritis of the hands – helping patients heal themselves.
01.01.2020Surgery is required if you need an artificial joint. Patients and doctors must select the type of surgery that’s best suited and choose between robot-assisted, traditional or minimally invasive surgical approaches. Post-operative risks should be kept to a minimum, while benefits should outweigh any possible complications.
12.12.2019Diagnostic testing usually takes some time and a sterile environment to get the results. To cut down on the costs and effort spend on these tasks there are different diagnostic tests. One of them are single-use tests offered by SensDx S.A. The technology behind them not only makes the process faster and easier, but provides the opportunity to expand into home use in the future as well.
04.11.2019Artificial intelligence holds the promise of salvation when it comes to medicine: it is meant to unburden medical professionals, save time and money and perform tasks reliably and tirelessly. But before AI algorithms are allowed to diagnose diseases, many technical and ethical questions still need answers.
04.11.2019Soon, the world's largest trade fair for medical technology will open its doors again: More than 5.000 exhibitors will present their newest products and ideas at MEDICA from 18 to 21 November. You will not only meet well-known companies here, but also lots of young start-ups. Or, you can visit the MEDICA forums and conferences to experience a rich program of lectures and discussions.
01.08.2019Antibiotic resistance is modern medicine's greatest challenge. Some bacteria only respond to a handful of antibiotics, prompting hospitals to spend a lot of time finding an effective drug. That’s why it is critical for physicians to rapidly identify antibiotic resistance to avoid ineffective treatments.
01.08.2019An untreatable infection is a nightmare for physicians and potentially life-threatening to the patient. Unfortunately, more and more pathogens emerge that are resistant to drugs, especially antibiotics. We need to use our drugs smartly and come up with technical solutions as well to prevent our weapons from blunting in the future.
01.08.2019The medical devices value chain has gaps between academic research and industrial practice that slow down innovation processes. This also applies to time-sensitive and urgently needed products such as rapid diagnostic tests to identify resistant pathogens. At the InfectoGnostics Research Campus in Jena, partners from research and medicine team up to close these gaps.
01.08.2019Antibiotic resistance is on the rise in all parts of the world, complicating medical treatment of serious bacterial infections in patients. The World Health Organization estimates that approximately 33,000 people die each year from antibiotic-resistant bacteria in Europe alone. Bacteria that are resistant to multiple or even all known antibiotics pose an ever-increasing threat.
22.03.2019Over six million people in Germany have diabetes. It is estimated that almost 400 million people are affected by this disease worldwide. Diabetes sufferers must prick their fingers several times a day to monitor their blood sugar.